Search Results

Search found 14546 results on 582 pages for 'mod authz host'.

Page 501/582 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Does ICS modify windows firewall policies in the registry?

  - by insipid

  I had a host machine I wanted to enable ICS on. First I realized that doing so was not possible until I enabled the Windows Firewall. Once I enabled the firewall and set up ICS, I noticed due to group policy I could no longer disable the firewall. Also, any ports I tried to open seemed to be ignored. Although nothing seemed to be configured when I used the mmc snap-in to view local computer policy, when I checked the registry I noticed several policies set there in HKLM (such as disabling AllowLocalPolicyMerge). I was able to remove the policies from the registry and my open ports worked, but they were eventually re-added without my input. The network I am sharing the internet from is an "unsecured" wireless network with an authentication page, is it possible that this is causing those policies to be set? Did ICS set those policies? When you go to the properties of the ICS enabled adapter and go to the ICS settings it takes you to a tab called services where you can add and remove "services running on your network that internet users can access". Is this related to the windows firewall?

  Read the article

• Remote access to phpmyadmin from computer belongs to same LAN

  - by Charles

  OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

  Read the article

• Trying to send email from nagios

  - by batman

  I'm very new to Nagios. I'm trying to send email alerts. But that doesn't seem to be working. But in my log of nagios I can see this : SERVICE ALERT: Appserver;Tmp directory;CRITICAL;HARD;1; Where host notifications are generated via email, only service alerts are not working. And when I look at sendEmail log I can see this : Sep 14 12:38:39 x.x.x.x. sendEmail[23005]: ERROR => You must specify a 'from' field! Try --help. Sep 14 12:39:39 x.x.x.x.x. sendEmail[23129]: ERROR => You must specify a 'from' field! Try --help. Sep 14 12:40:39 x-x-x-x-x sendEmail[23233]: ERROR => You must specify a 'from' field! Try --help. Where I'm making the mistake? Thanks in advance.

  Read the article

• Routing for remote gateway over VPN in Vista/7 broken?

  - by Raymond

  Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

  Read the article

• Windows 8 using as a webserver

  - by Jason

  I have a few hobby websites that I currently host on CentOS 6. Apache, mail serving, PHP, MySQL nothing special. In the past I used Windows XP to do this same task, for years, and I was OK. I switched to Linux and for the last few years it has been such a pain. updates break, certain apps only support certain distros without compiling from source. It prevents me from working on my hobby sites more because I am always fixing something. With Windows I locked it down, I run a hardware firewall and packet analyser, kept up on updates and A/V and never had a problem. I dont allow RDC from outside the local LAN, no FTP open, run OpenSSH on an obscure port.. I am considering switching to Windows 8 (since it is a cheaper license now that Windows 7) and running apache, HMailServer, PHP, MySQL, just like my CentOS install. My questions: I am not familiar with Windows 8, can the above be done like XP? No new security restrictions or the OS preventing this from happening? The machine is a Athlon 64-bit X2 with 32GB of RAM. Will Windows 8 see all of the RAM? Technically the machine came with Windows 7, and there is a serial number on it but I am sure I wiped away the Windows 7 recovery partition when I switched to Linux....

  Read the article

• Computing Number of Bits in Public Key

  - by eb80

  I am working with DKIM and trying to compute the public key size of some DKIM signatures. I know from tools that Gmail's is now 2048, but how could I have figured this out myself (i.e., what exact Linux commands and why)? user@host$ dig txt 20120113._domainkey.gmail.com ; <<>> DiG 9.8.3-P1 <<>> txt 20120113._domainkey.gmail.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 52228 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;20120113._domainkey.gmail.com. IN TXT ;; ANSWER SECTION: 20120113._domainkey.gmail.com. 300 IN TXT "k=rsa\; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA1Kd87/UeJjenpabgbFwh+eBCsSTrqmwIYYvywlbhbqoo2DymndFkbjOVIPIldNs/m40KF+yzMn1skyoxcTUGCQs8g3FgD2Ap3ZB5DekAo5wMmk4wimDO+U8QzI3SD0" "7y2+07wlNWwIt8svnxgdxGkVbbhzY8i+RQ9DpSVpPbF7ykQxtKXkv/ahW3KjViiAH+ghvvIhkx4xYSIc9oSwVmAl5OctMEeWUwg8Istjqz8BZeTWbf41fbNhte7Y+YqZOwq1Sd0DbvYAD9NOZK9vlfuac0598HY+vtSBczUiKERHv1yRbcaQtZFh5wtiRrN04BLUTD21MycBX5jYchHjPY/wIDAQAB" ;; Query time: 262 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Nov 19 10:52:06 2012 ;; MSG SIZE rcvd: 462

  Read the article

• Nginx configuration leads to endless redirect loop

  - by brianthecoder

  So I've looked at every sample configuration I could find and yet every time I try and view a page that requires ssl, I end up in an redirect loop. I'm running nginx/0.8.53 and passenger 3.0.2. Here's the ssl config server { listen 443 default ssl; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; ssl_certificate /home/app/ssl/<redacted>.com.pem; ssl_certificate_key /home/app/ssl/<redacted>.key; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Url-Scheme $scheme; proxy_redirect off; proxy_max_temp_file_size 0; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Here's the non-ssl config server { listen 80; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Let me know if there's any additional info I can give to help diagnose the issue.

  Read the article

• VirtualBox doesn't see raw partitions

  - by smbear

  What I want to achieve is to set up virtual machine with VirtualBox. Host OS is Windows 7 Home Premium, guest will be (k)Ubuntu 12.04 on a raw partition. The first problem is that when I issue following command: VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive0 I get following result: Number Type StartCHS EndCHS Size (MiB) Start (Sect) 1 0xee 0 /0 /1 1023/254/63 715404 1 I'm guessing that VirtualBox is unable to see my partitions. If I use diskpart tool, then all partitions are listed correctly (note Polish language version of Windows): DISKPART> select disk 0 Obecnie wybranym dyskiem jest dysk 0. DISKPART> list partition Partycja ### Typ Rozmiar Przesuniecie ------------- ---------------- ------- ------------ Partycja 1 System 200 MB 1024 KB Partycja 2 Zarezerwowany 128 MB 201 MB Partycja 3 Podstawowy 139 GB 329 MB Partycja 5 Nieznany 4883 KB 140 GB Partycja 6 Podstawowy 50 GB 140 GB Partycja 7 Podstawowy 484 GB 190 GB Partycja 4 Odzyskiwanie 24 GB 674 GB Additional note: my PC is using EFI to boot OS. Basing on the results listed above, I believe that: I messed up with my partition table. Something is wrong with VirtualBox. Can anyone help with this issue?

  Read the article

• Measure Upload Speed between a client and our server

  - by tresstylez

  We host a SAAS application specially customized for multiple clients. For one customer in particular -- they are reporting sporadic performance issues from various locations on their network, in particular UPLOADING documents through a form on our website. The client claims they have "bandwidth to spare" and that utilization of their "pipe" is so low that it MUST be our application, but our application has MANY clients and all features are working fine for all other clients. Interestingly enough -- DOWNLOADS (ie. just accessing the website, or downloading documents) is working fine. Speed test shows that they should get 1.2Mbps UP. So, a 3MB file should take 20 secs to upload. It takes 60+ seconds on their network. Sometimes even small files take OVER 10 minutes to upload or they timeout. Pings and Traceroutes don't show any abnormally long hops or response times. They claim other SAAS applications they use allow them to upload just fine. Both IT teams are working together to resolve this issue. What kind of data can I request from the clients to begin ruling things out. Seems like we need to somehow measure LATENCY of the networks involved or even at the switch level, we need to understand if packets are getting dropped somewhere and why. Where should I start? Any help is appreciated. I'll provide more info upon requests

  Read the article

• NAT via iptables and virtual interface

  - by Alex

  I'm trying to implement the following scenario: One VM-host, multiple guest VMs, each one gets its own IP-address (and domain). Our server has only one physical interface, so the intended use is to add virtual interfaces on eth0. To complicate our situation the provider uses port-security on their switches, so I can't run the guest interfaces in bridged mode, because then the switch detects a "spoofed" MAC-address and kills the interface (permanently, forcing me to call the support, which I'm sure will get them a little bit angry the third time ;) ). My first guess was to use iptables and NAT to forward all packages from one virtual interface to another one, but iptables doesn't seem to like virtual interfaces (at least I can't get it to work properly). So my second guess is to use the source IP of the packages to the public interface. Let's assume libvirt creates a virbr0-network with 192.168.100.0/24 and the guest uses 192.168.100.2 as IP-address. This is what I tried to use: iptables -t nat -I PREROUTING --src public_ip_on_eth0:0 -p tcp --dport 80 -j DNAT --to-destination 192.168.100.2:80 That doesn't give me the intended results either (accessing the server times out). Is there a way to do what I'm trying to do, or even to route all traffic to a certain IP on a virtual interface to the VM's device?

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• Bandwidth monitoring with iptables for non-router machine

  - by user1591276

  I came across this tutorial here that describes how to monitor bandwidth using iptables. I wanted to adapt it for a non-router machine, so I want to know how much data is going in/coming out and not passing through. Here are the rules I added: iptables -N ETH0_IN iptables -N ETH0_OUT iptables -I INPUT -i eth0 -j ETH0_IN iptables -I OUTPUT -o eth0 -j ETH0_OUT And here is a sample of the output: user@host:/tmp$ sudo iptables -x -vL -n Chain INPUT (policy ACCEPT 1549 packets, 225723 bytes) pkts bytes target prot opt in out source destination 199 54168 ETH0_IN all -- eth0 * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1417 packets, 178128 bytes) pkts bytes target prot opt in out source destination 201 19597 ETH0_OUT all -- * eth0 0.0.0.0/0 0.0.0.0/0 Chain ETH0_IN (1 references) pkts bytes target prot opt in out source destination Chain ETH0_OUT (1 references) pkts bytes target prot opt in out source destination As seen above, there are no packet and byte values for ETH0_IN and ETH0_OUT, which is not the same result in the tutorial I referenced. Is there a mistake that I made somewhere? Thanks for your time.

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• How do I get started with the M-Project is a Mobile HTML5 JavaScript Framework on Windows?

  - by Bruce Whealton

  This website for this great tool, call the M-Project says that I will need to add a doskey like this: doskey espresso=node C:\Path\To\Espresso\bin\espresso.js $1 $2 $3 $4 (It is a tool for creating Native mobile apps with the Phonegap/Cordova library, and it seems to be something that would be very helpful in this process). If I enter that at a command prompt in Windows 7 or 8, it's not going to stick around or persist. Is it an Environment Variable? Then it says at this page: http://www.the-m-project.org/ that it will work with Windows with some additional tools installed. The next line says that Node.js is needed, so I don't know if that is the additional tools mentioned above. Also, in an old discussion I read that one could just install cygwin. What would that do? It doesn't actually install any of the Linux distributions. I did install Ubuntu 12.04 server with VirtualBox because I thought it would be good to learn more about using Linux as I manage websites that are on a dedicated host. Anyway, the suggestion to install cygwin did not go into any details... I guess it would allow one to create a bash profile?? which would only work in a cygwin Command Line Window. Is that right? Isn't there a similar file that one could use in Windows or an Environment Variable that one could set to be able to achieve the same result? Thanks, Bruce

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• How to secure an Internet-facing Elastic Search implementation in a shared hosting environment?

  - by casperOne

  (Originally asked on StackOverflow, and recommended that I move it here) I've been going over the documentation for Elastic Search and I'm a big fan and I'd like to use it to handle the search for my ASP.NET MVC app. That introduces a few interesting twists, however. If the ASP.NET MVC application was on a dedicated machine, it would be simple to spool up an instance of Elastic Search and use the TCP Transport to connect locally. However, I'm not on a dedicated machine for the ASP.NET MVC application, nor does it look like I'll move to one anytime soon. That leaves hosting Elastic Search on another machine (in the *NIX world) and I would probably go with shared hosting there. One of the biggest things lacking from Elastic Search, however, is the fact that it doesn't support HTTPS and basic authentication out of the box. If it did, then this question wouldn't exist; I'd simply host it somewhere and make sure to have an incredibly secure password and HTTPS enabled (possibly with a self-signed certificate). But that's not the case. That given, what is a good way to expose Elastic Search over the Internet in a secure way? Note, I'm looking for something that hopefully, will not require writing code to provide shims for the methods that I want (in other words, writing forwarders).

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• How do you optimize your Outlook Exchange + IMAP setup?

  - by Mike

  My company provides an Outlook/Exchange account we must use for mail/calendar. Like many companies, they unfortunately also provide a ridiculously small mail quota. I got tired of managing and backing up .pst files (since I'm always in my e-mail there is never a good time to back it up), so I started storing my archived mail "in the cloud", using an IMAP server I set up on my Linux box. This has a few drawbacks for me: IMAP (at least the implementation in Outlook) is *very slow*. Furthermore, if I move a large number of messages to the IMAP server, it blocks the entire Outlook client for hours sometimes, which is quite annoying. Can't use exchange over HTTP to do mail without launching a VPN session, because the client-side rules I have which organize my mail fail and disable the rule if the IMAP server can't be reached. If I reply to a message from my IMAP store, I have to specify a SMTP server willing to relay for me in order to send e-mail, unless I always remember to select my Exchange account while composing e-mail. ... but the main advantage of being very easy to back up, with a couple of cron jobs that essentially do an 'rsync'. Short of moving the IMAP server to my local host (which seem like might have the same file locking problems as using a .pst), my options seem limited for solving (1). I'd like to come up with a solution for (2) and (3) though. For problem (2) would it be possible to somehow tell Outlook that the IMAP server is "offline", and have it synchronize my changes during a periodic "send and receive"? If so, I wonder if it would block the Outlook client, like it does in problem (1), and if it would be compatible with the client-only rules I use to sort my mail into folders. I've looked all over the options menu and have not found a way to tell Outlook to not use a certain account for sending mail, which would solve (3). Is anyone else crazy enough to be doing something like this? Any ideas?

  Read the article

• Does migrating 2 domain controllers between 2 datacentre requires both virtual machines to be shut down at the same time?

  - by Imagineer

  I was attempting to migrate 2 virtual machines that are domain controllers between 2 datacentres running ESX 3.5 and ESX 4.1. I was advised to shut down both domain controller at the same time during the migration process. This is to avoid USN Rollback and other replication issues. The following are the steps that I was planning to perform: 1. Shutdown both DC. 2. Copy both VMs files across to new datacentre using Veeam FastSCP (connection to both vCentre through IP address instead of hostname) 3. Power them up at new datacentre. 4. Configure Network interface/DNS/DHCP for both DCs in new datacentre I have tried to use Veeam FastSCP rather than VMware Standalone Converter is because its copying rather than converting. Someone also suggested that I use backup and restore app like Veeam backup and replication software. Sounds like a simple job, but after shutting down both DCs, the transfer rate using FastSCP is so slow registering only 1KB/s as oppose to the normal 1MB/s (or more). When that attempt to transfer failed, I tried to cold clone both DCs resulted in the both ESX hosts get disconnected. I have tried troubleshooting by referring to this - VMware KB - Diagnosing an ESX Server that is Disconnected or Not Responding in VirtualCenter It seems that the DNS being down is the caused of all unusual occurrence. The moment I powered up the DCs via VMware console command, the ESX host were able to connect to the vCentre again. How can I avoid such a pitfall again? Am I doing it correctly? Any help would be greatly appreciated! Thank you.

  Read the article

• Failed none and iptables

  - by Michael

  The problem is that when I ssh to my host with putty and enter user name, after that the password prompt delays. Found this is directly related to my iptables and can solve by changing default policy to ACCEPT. If default INPUT policy is ACCEPT, then password prompt is coming immediately. Mar 13 00:05:01 server-ubuntu sshd[6154]: Connection from 192.168.0.10 port 26304 Mar 13 00:05:06 server-ubuntu sshd[6154]: Failed none for acid from 192.168.0.10 port 26304 ssh2 However, if default INPUT policy is DROP, I got slight delay in getting password prompt after I enter username Mar 13 00:07:12 server-ubuntu sshd[6177]: Connection from 192.168.0.10 port 26333 Mar 13 00:07:35 server-ubuntu sshd[6177]: Failed none for acid from 192.168.0.10 port 26333 ssh2 For the second case, I tried to set default policy for FORWARD and OUTPUT chains to ACCEPT, but it didn't help. The only rule in this case is: -A INPUT -i eth1 -m mac --mac-source 00:26:XX:XX:XX:XX -j ACCEPT 00:26:XX:XX:XX:XX is the mac address from which I am trying to ssh to server's LAN(eth1). I'm sure there has to be some rule, which I can use while default INPUT chain policy is DENY in order to get password prompt immediately. I realize that the error message in the log is something normal and part of some verification procedure.

  Read the article

• Fetch new Mails (Also from Subfolders) from another IMAP server as new Mail in Postfix

  - by Tobi

  everyone. I have installed Postfix on a server with Aliases and Domains from a MySQL Database. It is configured to forward some adresses to other Mail Accounts and also delivers some mails in local mailboxes that will be queried over a dovecot imap server. For this example let there be two users: [email protected] what is a user that gets its mail just forwarded to let's say [email protected] [email protected] what is a user that accesses its mail from local IMAP. Now, I want to fetch some Mails from another mailserver and handle them as if they were sent to a user of my Mailserver. Lets say those corelations exist: [email protected] has two external accounts: [email protected] and [email protected] [email protected] has also one external account [email protected] The Problem is the new mails on that other Mailserver is not always in the inbox, it might be in subdirectories: mailinglists/all or mailinglists/it but also in mailinglists/some-other-department which is not interesting and should not be delivered. I already found a programm called fetchmail but I cannot find how to fetch subdirectories or decide which subdirectories are fetched.

  Read the article

• Changing the prompt in telnet

  - by wim

  With some help from people on here, I was able to set a custom prompt in an ssh session (thanks!). Now I need to do the same in telnet, but I'm not sure of what syntax I could use for that. Basically the telnet prompt is just a > character, I need to modify it to something I can more reliably detect in automation jobs. Hope this makes sense. From inside telnet, trying to escape that command with a bang like !PS1=spam and !PS2=eggs did not change it. wim@wim-acer:~$ ssh [email protected] -i ~/.ssh/guest_nopassphrase -t "export PS1='Sending a custom prompt \w \$ '; exec sh" Sending a custom prompt ~ $ set HOME='/var/tmp' IFS=' ' LOGNAME='guest' PATH='/sbin:/usr/sbin:/bin:/usr/bin' PPID='1128' PS1='Sending a custom prompt \w $ ' PS2='> ' PS4='+ ' PWD='' SHELL='/bin/sh' TERM='xterm' USER='guest' Sending a custom prompt ~ $ telnet localhost <snip> Entering character mode Escape character is '^]'. > !set CONSOLE='/dev/ttyp0' HOME='/var/tmp' IFS=' ' LOGNAME='root' PATH='/sbin:/bin:/usr/sbin:/usr/bin' PPID='546' PREVLEVEL='N' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/var/tmp' RESPAWN_COUNT='1' RESPAWN_LAST='0' RESPAWN_MAX='5' RESPAWN_TIME='5' ROOTDEV='/dev/sla1' RUNLEVEL='5' SHELL='/bin/false' TERM='linux' USER='root' > > Connection closed by foreign host Sending a custom prompt ~ $ Connection to 192.168.1.124 closed. wim@wim-acer:~$

  Read the article

• IIS FTP 7.5 Data Channel Problem (SSL)

  - by user59050

  Hey there I wonder if anyone can get me in the right direction. I am setting up both a FTPS Client and Server, FTPS Server using Microsoft’s iis FTP 7.5. On the client side it will be running on Linux and I am using M2crypto for the openssl wrapping (python). I am worried the problem is on the server side (iis7.5) due to the following discovery : If I host using Filezilla with BOTH the control and data channel being forced to be encrypted it works 100% (100% file transmission), if i use iis as the server everything works up to the point when the data channel takes over... i.e. all data of the retrieved file is already received correctly in my basket! The ftp server just won't send the final '226 Transfer complete.' on the cmd socket. Why? If i force the client or server to close the connection the file is 100% intact....If i use iis 7.5 with forced encryption on control channel all works 100% as long as i don’t force data channel... Here are some screenshots to demo this... Client View after Kill Client : pics @ http://forums.iis.net/p/1172936/1960994.aspx#1960994 Summary : We can establish the connection, do directory listings, start the upload, see the file (0bytes) created on the server but then the client hangs. If we terminate the client, the uploaded file on the server suddenly jumps up to full size.

  Read the article

• Setting up /etc/network/interface file for KVM ubuntu 10.10

  - by Charles Thornton

  I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

  Read the article

• Ubuntu Server Wireless connection issue - replaced router but kept ESSID

  - by Stevo

  I have a ubuntu server 12.04 which was connected to my wireless network with no problem I replaced the wireless router but kept the ESSID and password the same. All other devices on network have connected correctly. However the Ubuntu Server will not route correctly. It will connect to the wifi router, and get a dhcp served IP address, however it will not route anything. I cannot ping the router from the server. the contents of /etc/resolve.conf are updated with the information from the router, (the host name has been served) I know there is nothing wrong with the router or the server, or the wireless card etc. I'm assuming there's some cached setting that associates the old router with the ESSID and causing the issue. I've got a lot of other devices connected to the router, so don't want to change the name of the ESSID. How do I fix this? EDIT: outputs (abbreviated as I've got no cut and paste) netstat -rn: Kernel IP Routing table Dest Gate Gen Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0. UG 0 0 0 wlan0 192.168.0.0 0.0.0.0. 255.255.255.0 U 0 0 0 wlan0

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >