Search Results

Search found 28643 results on 1146 pages for 'go'.

Page 502/1146 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• Logging with Resource Monitor?

  - by Jay White

  I am having sudden spikes in disk read activity, which can tie up my system for a few seconds at a time. I would like to figure out the cause of this before I set my machine to go live. With Performance Monitor I know I can log activity, but this does not show me individual processes that cause a spike. Resource Monitor allows me to see processes, but I have no way to keep logs. It seems unless I have Resource Monitor open at the time of a spike, I will not be able to identify the process causing the spike. Can someone suggest a way to log with Resource Monitor, or an alternative tool that can?

  Read the article

• What is the lease irriating printer manufacturer?

  - by aireq

  Currently I have a Lexmark all in one printer/scanner which has some of the worse drivers I've seen for a printer. The installation takes forever. Then once it's installed the printer will only work if I keep the "Lexmark Productivity Studio" running in my system tray. Then later after I've scanned something 99% of the time the "Save to PDF" button doesn't do anything when I click it. It is also a wireless printer, but of course the only way to set any of the wireless settings is during the driver setup. So if my WEP key changes then I have to go off and reinstall the entire printer driver. Lately I tried refilling one of the ink cartridges with a key I bought off amazon, and now both the printer and the drivers keep complaining about being out of "Official Lexmark Ink" This comic from The Oatmeal pretty much sums up my feelings about consumer printers and their drivers. This question is, of course, pretty subjective but I'd like to know what (if any) consumer printer brands actual provide quality drivers and software with their printers.

  Read the article

• Is it possible to use SELinux MCS permissions with Samba?

  - by Yuri

  Created a user1: adduser --shell /sbin/nologin --no-create-home user1 passwd user1 smbpasswd -a user1 smbpasswd -e user1 semanage login -a -s "unconfined_u" -r "s0-s0:c0" user1 Added a category c0 for the folder ./123 inside the Samba share chcat s0:c0 /share/123/ After that the user1 can't go into this folder: type=AVC msg=audit(1332693158.129:48): avc: denied { read } for pid=1122 comm="smbd" name="123" dev=sda1 ino=786438 scontext=system_u:system_r:smbd_t:s0 tcontext=unconfined_u:object_r:samba_share_t:s0:c0 tclass=dir But if remove the c0 category: restorecon -v /share/123/ user1 opens folder with no problem. Is I'm doing something wrong or Samba doesn't support SELinux MCS? Have installed on CentOS 6.2 are: samba3.i686 3.6.3-44.el6 @sernet-samba selinux-policy.noarch 3.7.19-126.el6_2.10 @updates selinux-policy-targeted.noarch 3.7.19-126.el6_2.10 @updates

  Read the article

• Remap Apple MacBook Eject key in Windows?

  - by user1238528

  I have a MacBook with Windows 7 on it as my daily driver. My MacBook has a nearly useless Eject key, but I wish it was a forward delete key. KeyRemap4Macboook works great in OS X. Is there any software that is equivalent in Windows? I have tried KeyTweaks and HotKeys and neither of them will recognize the Eject key. I looked it up and I think it is key 161. Is there any way to make the key into a more useful forward delete? Could I just go into the registry and do it that way?

  Read the article

• Which window manager do you use?

  - by Stephan202

  Combining "What is your default web browser?" and "What are the differences between Linux Window Managers", I ask you: which window manager do you use, and why? Myself I prefer a minimal window manager on the one hand (in the past I used Fluxbox), but on the other hand wish to go with the main stream, to ease finding (Googling) solutions in case of problems. Hence I stick with Gnome as it is shipped with Ubuntu. Why do you use the window manager which you use? I understand some reasons may be subjective, but please try to cite technical reasons where possible.

  Read the article

• Google Docs: Tie the Form with a Spreadsheet to email addresses and responses?

  - by Nick Gorbikoff

  Hello. I'm just trying to figure out if I'm doing something wrong or it's not possible. I created a small form ( I'm trying to get current mailing addresses from my friends and relatives - since I lost my address book) and it ties to a Google Spreadsheet. I sent out a sample to my work address - filled out a form and saved it. However when I go to see the responses - in a spreadsheet - it has a time stamp but it has no email associated with a response - so I don't know who made it ( well in this case I know it's me - but when you have 100 replies?) I understand - it may be great for anonymous surveys - but in this case I'd like to know who responded with what - and I don't wan to make them fill out Email and First Name & Last Name - I already have this information. Any suggestions?

  Read the article

• Website deployment - managing user-uploaded content?

  - by Legion

  I'm a programmer by trade, "server administrator" by company necessity. We're looking at dumping the old painful "update site by FTP upload" style of deployment. Having the webserver check out the latest code base from version control into a folder and having a "current" symlink point to the latest checkout (allowing for easily stepping back to an older version by changing the symlink) seems to be the way we want to go. But I have a question: what's a good practice for dealing with user-uploaded content? This stuff isn't in version control. I have a couple of ideas for dealing with this, but what is the smart, accepted practice?

  Read the article

• Backup drivers for a device in Windows 7

  - by Moses

  If I can't find a driver on the internet when I prep for a reinstall of Windows 7, I figure if the driver is already installed, why not back it up and reinstall later? The only method I know of is going through Device Manager Device Properties Driver Details. This gives me a nice list of all the files, but then I need to go manually retrieve all of them. For devices with a lot of driver files, this is inefficient. Is there a better way to accomplish this?

  Read the article

• Can't connect to YouTube from specific network

  - by Tyilo

  Using my current network, I am unable to connect to http://www.youtube.com/. It doesn't matter what browser I use or if I use a cli-command (wget, curl). Error in Google Chrome: Oops! Google Chrome could not connect to www.youtube.com Error using curl: curl: (7) couldn't connect to host If I use nslookup to get the IP-address of YouTube, I get 173.194.32.32. If I go to http://173.194.32.32/ in my browser it can connect, but as Google is probably checking the Host HTTP-header, it shows Google's frontpage instead. There is no blocked websites on the router and other devices on the network seems to work. My computer only has this problem on this specific network. I am using Mac OS X 10.8.2 on a MacBook (mid 2009).

  Read the article

• opening and closing connection with port happening fastly

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• Is it possible to share a big-screen monitor - switching between personal Windows 7 laptop in the office?

  - by Nam Gi VU

  Hi everyone, This would be strange to ask this but I'll try a go :). The situation is as below. We use laptop & wifi in the office. We often make demo to each other and need to show the demo on a big screen mornitor hang in the middle of the room :). I want to switch the display between each of the staffs using LAN wifi network. Please give me some suggestions on how to do that. Thank you! Nam.

  Read the article

• Wordpress Blank White Page for Login

  - by HollerTrain

  When I go to the /wp-login.php portion of my Wordpress site I get a blank white screen. In fact, throughout the entire domain I get blank white screen. Also, I can't even connect to the server via FTP (tried with other FTP accts to make sure not FTP client). Is this an issue with the host or my WP? Not even sure how to fix it if it's on my end cuz I can't even login to FTP or to the Admin Dashboard! Any help = appreciated.

  Read the article

• ISPConfig - Unexisting subdomain address goes to an existing one

  - by xperator

  I am running Nginx/ISPConfig setup for about 6-7 months. Never had a problem and everything is smooth. But I just noticed that if browse to "blab.example.com", the page opens one of my wordpress blogs on the other domain. No matter what name I use for subdomain, Anything that I enter randomly "b53ks.example.com" still goes to that blog page. I have 3 or 4 different domain names and websites on the same server. But I think I misconfigured somewhere and that might be the cause of this. Lets say I have these domains: example-1.com, example-2.com, another-example.com If I go to anything.example-1.com or serverfault.example-2.com, or google.another-example.com the returned page is my blog at blog.example-1.com Note : I didn't set any subdomain in ISPConfig. Instead, I used "Add new website" for making a subdomain.

  Read the article

• Configuring vsftpd with nginx on ubuntu

  - by arby

  I have vsftpd installed on Ubuntu 12.04LTS along with nginx, php, and sql on an Amazon ec2 instance. The web server is good to go, but I'm having trouble connecting to the FTP server. I'm not quite sure how to set the privileges or what configuration options I might be missing. By default, the location of the web root is at /usr/share/nginx/www and it is owned by root:root. The web server runs as user www-data in the group www-data. I've opened port 21 and set the passive ports in the ec2 backend and ufw firewall. In vsftpd.conf, I have: ... anonymous_enable=NO local_enable=YES local_umask=0027 chroot_local_user=YES pasv_enable=YES pas_max_port=12100 pasv_min_port=12000 port_enable=YES ... Now, I'm unsure how to create the FTP user that when I login, displays my web directory with write access. I've tried it a few different ways, but I keep running into errors (either no connection, no write access, or very slow timeouts.)

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• Packets marked by iptables only sent to the correct routing table sometimes

  - by cookiecaper

  I am trying to route packets generated by a specific user out over a VPN. I have this configuration: $ sudo iptables -S -t nat -P PREROUTING ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A POSTROUTING -o tun0 -j MASQUERADE $ sudo iptables -S -t mangle -P PREROUTING ACCEPT -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A OUTPUT -m owner --uid-owner guy -j MARK --set-xmark 0xb/0xffffffff $ sudo ip rule show 0: from all lookup local 32765: from all fwmark 0xb lookup 11 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table 11 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 10.8.0.6 dev tun0 scope link 10.8.0.1 via 10.8.0.5 dev tun0 0.0.0.0/1 via 10.8.0.5 dev tun0 $ sudo iptables -S -t raw -P PREROUTING ACCEPT -P OUTPUT ACCEPT -A OUTPUT -m owner --uid-owner guy -j TRACE -A OUTPUT -p tcp -m tcp --dport 80 -j TRACE It seems that some sites work fine and use the VPN, but others don't and fall back to the normal interface. This is bad. This is a packet trace that used VPN: Oct 27 00:24:28 agent kernel: [612979.976052] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976105] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976164] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976210] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976269] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976320] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976367] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976414] TRACE: nat:POSTROUTING:rule:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb and this is one that didn't: Oct 27 00:22:41 agent kernel: [612873.662559] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662609] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662664] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662709] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662761] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662808] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662855] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb I have already tried "ip route flush cache", to no avail. I do not know why the first packet goes through the correct routing table, and the second doesn't. Both are marked. Once again, I do not want ALL packets system-wide to go through the VPN, I only want packets from a specific user (UID=999) to go through the VPN. I am testing ipchicken.com and walmart.com via links, from the same user, same shell. walmart.com appears to use the VPN; ipchicken.com does not. Any help appreciated. Will send 0.5 bitcoins to answerer who makes this fixed.

  Read the article

• Use cURL with multiple POSTs

  - by Austin

  I'm trying to use cURL to download the contents of webpages that require forms to get to. In a browser it looks something like this 1.) Login using POST 2.) Pick which page to go to using another POST 3.) Pick another page... using POST 4.) etc.. until I get to the page I want, then download all textfiles linked to on that page. I am attempting to do this using a bash script and some loops with the values that change for each POST. My problem is how do I do multiple POSTs with cURL? Must there be cookies involved? FYI the website is http://metagenomics.nmpdr.org/ (MG-RAST).

  Read the article

• Radeon 4670 Card Has 2 DVI Outs But Only Works When One is used in Win7 x64

  - by ssmith

  I have an ATI XFX Radeon 4670 1GB video card in a Windows 7 Ultimate x64 setup. If I only use one monitor, all is well. If I plug in a second DVI cable to the card, both monitors go dark. I can get one or the other to display, but only when it is the only one plugged into the card. I'm really hoping for a dual-monitor setup here as that was the point of the card. I'm using ATI Radeon HD 4600 Series video drivers dated 11/24/09 (8.681.0.0) which are the latest from their site and are supposed to work with Vista or Win7 x64. When the computer boots with both displays connected, both monitors display the inital bios and boot screens. The Win7 splash screen also displays, but by the time it goes to the login screen, one monitor is offline.

  Read the article

• HP Laserjet "maintenance interval" vs "fuser life"

  - by marienbad

  I posted a question about the Laserjet 8100DN earlier here: http://serverfault.com/questions/139043/buying-an-old-laser-printer-what-will-need-to-be-replaced and from doing some more research I have a new question: I found the "maintence interval" -- "the interval at which you should install a maintenance kit" (which is a fuser and rollers), and it is...350,000 pages. BUT, when I look at the specs for an HP 8100 fuser, it says the fuser has a life span of 150,000 pages. What gives? – Will the fuser go bad after 150 or 350? ==== BTW I hope it's ok to ask another similar question in a new thread -- I'm just following instructions from my thread on the topic at Meta.

  Read the article

• What are the mandatory Linux kernel modules to run inside of ESXi

  - by Marcin

  I'm used to rolling my own kernels for servers, as it nicely minimizes the number of exploits (and the resulting patches) to take care of. In a traditional (bare metal) world, the whole process is about knowing what you have (hardware), and what you need (Ethernet, IPv4, iptables, etc.) In a virtualized environment, some things stay the same (still need Ethernet and IPv4), some things go away (power management), and then there are some new needs (vxnet3, or vmware-tools, even though that's compiled outside of the kernel). So my question mostly concerns itself with the last two categories: what can I remove completely, and what new stuff do I want? For example, what IO scheduler do I want, if all my disk operations are going through another filesystem/scheduler/cache to get to the virtual disk? Do I need hyper-threading enabled, or is the VM going to show them to me anyway as a CPU anyway? Do I need Large Receive Offload turned on, or is that something that the hypervisor's network drivers are going to do for me?

  Read the article

• How to convert dvr-ms file in Ubuntu to DVD?

  - by edmicman

  I have a .dvr-ms file of a recorded TV show from my Vista Media Center. I would like to burn this to a DVD that can play on any standalone DVD player. My main PC that I want to use to convert it to a DVD format is running Ubuntu 10.04. I am able to play the file in Ubuntu using VLC (which surprised me) so I'm assuming I have what I need to decode it. I guess my questions are: What format do I need to convert this file to so that I could burn it to a playable DVD? I started to go through VLC's conversion process and chose I think H264 and AAC or something, and it gave a message about not having an AAC encoder. I'll look into that some more tonight, but is that something I could then burn to a DVD? Thanks for any help!

  Read the article

• Copssh, how to add users?

  - by Ken

  I installed copssh on Windows Vista (64-bit) here, and the installation seemed to go fine. It requires you to explicitly add users to log in, which is fine, so I opened the COPSSH Control Panel (really just an app), went to the Users tab, clicked Add, Forward, and the "User:" popup is empty. The "Domain:" popup has exactly one entry: my computer name. The "Documentation" shortcut in the start menu group is broken, but I found the folder it's supposed to point to, and I only see docs for command-line tools (which I'll investigate next). Is there something I'm missing? Is the COPSSH Control Panel just plain broken?

  Read the article

• Should I anticipate any problems trying to use the same SSL Cert on 2 computers (primary, backup)?

  - by Matt

  We have a production machine running IIS6 with a wildcard SSL certificate. The certificate that was installed is not exportable. We want to upgrade the system to IIS7. As part of this venture, we're creating a backup/failover server that will serve the exact same websites - when we take the primary down for upgrade, the secondary will take over. As such, the secondary also needs the SSL certificate. However, since the certificate was not exportable, this means re-keying it from Go Daddy. Per http://help.godaddy.com/article/867, I know that by re-keying the certificate the original will stop working. I'm still pretty new to SSL certificates, so are there any problems I should anticipate when installing the same SSL certificate on 2 different machines?

  Read the article

• Speeding up ROW_NUMBER in SQL Server

  - by BlueRaja

  We have a number of machines which record data into a database at sporadic intervals. For each record, I'd like to obtain the time period between this recording and the previous recording. I can do this using ROW_NUMBER as follows: WITH TempTable AS ( SELECT *, ROW_NUMBER() OVER (PARTITION BY Machine_ID ORDER BY Date_Time) AS Ordering FROM dbo.DataTable ) SELECT [Current].*, Previous.Date_Time AS PreviousDateTime FROM TempTable AS [Current] INNER JOIN TempTable AS Previous ON [Current].Machine_ID = Previous.Machine_ID AND Previous.Ordering = [Current].Ordering + 1 The problem is, it goes really slow (several minutes on a table with about 10k entries) - I tried creating separate indicies on Machine_ID and Date_Time, and a single joined-index, but nothing helps. Is there anyway to rewrite this query to go faster?

  Read the article

• Server freeze - how to debug

  - by Petr Peller

  I am running a Debian virtual server with Apache, PHP, MySQL. There is just 1 website with very low traffic running but the server very often (almost everyday) freezes and does not respond. When this happens the server is unreachable from web browser or by SSH and I have to go to administration of my provider and perform server hard reset after this the server seems to work fine. How can I find out what is causing the freezes? Linux vm2797 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >