Search Results

Search found 22298 results on 892 pages for 'default'.

Page 503/892 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

• How can I properly create /dev/dvd?

  - by chazomaticus

  Certain programs look for /dev/dvd by default to find DVDs. When I first boot my computer without a DVD inserted, /dev/dvd exists and points to the correct place (/dev/sr0). However, when I insert a DVD, /dev/dvd disappears. I'd like it to stick around so I don't have to navigate to /dev/sr0 in programs that are looking for DVDs. How do I ensure that the /dev/dvd symlink exists and points to the right place? It looks like I can add something to /etc/udev/rules.d/70-persistent-cd.rules. This site gives a couple of examples, but the 70-persistent-cd.rules file says "add the ENV{GENERATED}=1 flag to your own rules", which isn't part of the examples. The man 7 udev page is impenetrable to me, and I'm not convinced the linked page gives 100% of the information I need. So, what can I do on a modern, Ubuntu 12.04 (or later) system to make /dev/dvd always exist and point to the right device? EDIT: Is it as simple as adding ENV{GENERATED}=1 to the rules in the linked page, something like this: SUBSYSTEM=="block", KERNEL=="sr0", SYMLINK+="dvd", GROUP="cdrom", ENV{GENERATED}=1 Is that the right information for modern Ubuntu? What is ENV{GENERATED} doing there, when it wasn't generated, but hand-written?

  Read the article

• Is there some way Linux editors can tell the programming language without the file extension?

  - by vfclists

  I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

  Read the article

• cant make outbound calls - asterisk

  - by deanvz

  I have a basic Atcom IP01 with the following config Registered Voip (SIP) Trunk Registered Voip Phone - ext Dial Plan Outbound Call rule I made use of this manual that the manufacturer supplies: http://www.atcom.cn/cn/download/pbx/ip01/ATCOM%20IP01-User%20Manual-V1.0-EN.pdf Whenever I try and make a call, it seems that the outbound call rule that i defined does not get regarded as the default rule even though the dial plan lists this as the only outbound call rule. When dialling I see in the log file the following [Jan 1 09:10:07] NOTICE[176]: chan_sip.c:14377 handle_request_invite: Call from '6001' to extension '00765243679' rejected because extension not found. The 00765243679 is a cellular number. Am I missing a configuration in order to make outbound calls? Land line, other Voip numbers and cellular calls have been tried

  Read the article

• How to disable auto-assume in Google Chrome

  - by Ieyasu Sawada

  I've noticed that whenever I sign in in Google Chrome version 21.0 it automatically assumes and it automatically knows what I want to search. I basically use the address bar to search(my default search engine is Google) I don't go type Google.com on the address bar and then search from there. So what happens is that when I type something for example "vernier" for vernier caliper I'm automatically redirected to my facebook account which has a user account name of vern.ancheta. It's really getting annoying, this happens for every search term that I used maybe even ones that I haven't used before in my entire search history in Google. It always assumes as if it knows what I'm really thinking. What's the solution for this? Is this a bug in Google Chrome or just one of its annoying features. Please enlighten me on this.

  Read the article

• I noticed the answer to the Aug 2009 question of using VBA to set Custom Flag values

  - by Gary

  We are actively using the Follow Up mail feature to assign users to particular mail follow up items. Although mail item follow ups are generally the province of the individual user, by changing the flag value from "Follow Up" to "User name", we can see each other's follow up tasks and group on responsible party. Currently we accomplish the Flag value change manually. My sense is the easiest way to perfect the process is a separate macro for each user. Along the lines of the macro to change the star/end due date to end of month, please define the macro to re-assign the Flag value for each highlighted mail item (previously assigned by default). Thank you very much.

  Read the article

• Ubuntu: move logs from /dev/tty8 to different terminal /dev/tty12 or get rid of it.

  - by Casual Coder

  I want to know how to move or get rid of /dev/tty8 log output in Ubuntu 9.10. /dev/tty7 is my regular X session. When I am switching user to test account where I can try and test setups and configs I am at next available console i.e. /dev/tty9 because /dev/tty8 is taken by log output. Where can I configure this ? All I've found related to /dev/tty8 is commented lines in /etc/rsyslog.d/50-default.conf. I changed it like that: daemon,mail.*;\ news.=crit;news.=err;news.=notice;\ *.=debug;*.=info;\ *.=notice;*.=warn /dev/tty12 And I've got nice log output on /dev/tty12 but where is configuration for log output on /dev/tty8. How can I change it?

  Read the article

• Firefox 3.6 performance increase tricks.......

  - by metal gear solid

  I use many Add-ons which helps me in Web development so i can't uninstall those addons. and usually I keep open lots of tabs in Firefox. And almost always keep Firefox on on my system. I use default profile only I always keep every addons and firefox itself updated. I found some addons to reduce memory use on Firefox addons site , but user reviews were not good for them still Is there any tested tricks to increase performance and reduce memory use of Firefox 3.6, which really works?

  Read the article

• Windows XP: Consequences of setting a password for an account

  - by sleske

  I do not quite understand how Windows (specifically Windows XP) handles accounts with/without passwords. As far as I can see, on a fresh Windows XP install I have one default account which has admin rights does not have a password will auto-login (without password prompt) when the computer boots What happens if I set a password for this account? Will it still auto-login? Or will it always prompt for the PW? And generally, what consequences does it have if I set a password? I noted that Scheduled Tasks apparently cannot run under an account w/o password (creating a scheduled task will prompt for the account PW). Is there anything that will not work with a password set? Why is it even possible to have accounts without a password? I have some Unix/Linux background, but the concepts appear a little different under Windows.

  Read the article

• Can't install Linux drivers for ASUS N-13 wireless adapter

  - by jcc

  I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

  Read the article

• High quality/performance shared hosting (in northern Europe)

  - by Bente

  I work as a web developer on almost all levels. However, my typical customer is a 1-5 guys running some sort of consulting business. They have (or want) a web page with some kind of CMS so the can perform most (or all) editing themselves. I normally opt for Concrete5 as my default CMS because it's the most user friendly (and free) CMS I have found. My good recurring customers I host on my own server as a service, but I need a good host for the customers where I want to deliver a product and not be responsible for whatever may happen in the future. However, I still struggle with hosting! Experience shows that the typical ~1$ shared hosting is waaay to slow to run concrete5 smoothly, and a VPS is out of the question because I don't want to maintain it. So, where can I find as fast (from northern Europe), reliable, shared host where I can put a site and don't have to worry about the server going down or being unmaintained. I expect this should cost around $10-$20 but I'm open to all kinds of suggestions because different customers have different budgets.

  Read the article

• How to deny access to disabled AD accounts via kerberos in pam_krb5?

  - by Phil

  I have a working AD/Linux/LDAP/KRB5 directory and authentication setup, with one small problem. When an account is disabled, SSH publickey authentication still allows user login. It's clear that kerberos clients can identify a disabled account, as kinit and kpasswd return "Clients credentials have been revoked" with no further password / interaction. Can PAM be configured (with "UsePAM yes" in sshd_config) to disallow logins for disabled accounts, where authentication is done by publickey? This doesn't seem to work: account [default=bad success=ok user_unknown=ignore] pam_krb5.so Please don't introduce winbind in your answer - we don't use it.

  Read the article

• Windows VPN - NO internet access

  - by sharru

  I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

  Read the article

• 504 Gateway Time-out after php fatal error

  - by tiagojsag

  I'm using nginx and php-fpm to develop a symfony2 based website, under ubuntu 12.10 (yes, I know I'm using a beta OS). Everything was working out fine until, due to an error on my code, I called an unexisting function, and got the following: Fatal error: Call to a member function (....) This isn't a problem (it's a bug in my code, easily fixable), but after this, no other page loads. My browser just keeps trying to load the page from the webserver, until nginx timeouts (after +- 30s, which should be some default timeout) and returns: 504 Gateway Time-out Restarting php-fpm solves the issue. Nginx logs show a timeout message, and nothing appears on php-fpm logs, even if I set them to debug level. I tried switching from fpm to fastcgi, and the same thing happens. I've looked around, but all similar error are related to big requests/file handling, which isn't the case. All the pages on my website load in a few seconds, even under development conditions (no caching, etc).

  Read the article

• IIS 7 throws 401 responses on application whose physical directory has been shared

  - by tonyellard

  I have an IIS 7, Windows Server 2008 R2 box with a relatively fresh install. I've deployed a .NET 2.0 application using windows autentication to the server, and from the default website, added it as an application. I updated the IIS authentication to enable Windows Authentication. When I went to share out the physical directory for the application so that a developer could deploy updates, the users began to receive 401 errors. I can reliably recreate the issue by sharing out the directory of any newly created application. The IIS user has the necessary read/write access to the directory. What do I need to do to keep web users from receiving 401's while at the same time allowing this developer to have access to the physical directory for deployments? Thanks in advance!

  Read the article

• ignore or override current document page formatting with predefined settings automatically libreoffice

  - by alex

  When opening a document made by someone else, I would like the margins to automatically be set to 0.4 cm, the page orientation to landscape and page size to A3. My dad gets emailed a spreadsheet weekly and he prints them off. To fit them onto one page he applies these settings, which is quite laborious. I thought that there must be a quicker way of doing this! I tried creating a new default template with these settings but this only works for a new blank document. I tried to create a style to quickly apply these settings but I realised these styles are document / template specific (?) and so don't appear when opening someone else's document. Anyone have any ideas how I can do this? Thanks =]

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• Using Ruby on share web hosts

  - by Parhum

  We are developing a Wordpress theme and we are going to publish it on themeforest.com. We are using Sass(scss Syntax) as our CSS Preprocessor and we need to compile it on server side. We have two solutions: Use phpsass which is a php script(but it has some bugs) Use Ruby Compiler which most of wordpress plugins use this I noticed that plugins which use Ruby need to have PHP proc_open function enabled on server. My question is what are Pros and Cons of using Ruby compiler on servers? and are most of shared web hosts support Ruby and have PHP proc_open function enabled by default?

  Read the article

• Reporting available RDP sessions

  - by Sergei

  Hi All Default Windows 2003 Server has two RDP sessions available.If all of them are taken by someone else you will only be notified about it after providing your credentials. This seems like a waste of time especially in our environment where we share a lot of development server. Could a message be given as soon as you open the connection window if the connections are taken up? We can use qwinsta based script to check sessions before logon but it's still takes time. Is there a feature to do what I am asking for?

  Read the article

• Windows: How to add batch-script action to Right Click menu

  - by ervingsb

  I have a few programs that creates temp files or backup files or similar files that are not important. For example, GVim for Windows by default creates a backup file in filename.txt~. I sometimes need to clean up a dir and remove all these files. I have made a simple .bat file for this. However, it is cumbersome to have to start up cmd, navigate to the folder, run the script. Especially since this is a script that I would like to run often on various folders. And I do not want to copy the script to multiple folders, as this would be a maintenance nightmare. So, I was thinking, that the best solution would be to add a Right Click menu item that allows me to run the script. So that I can right click on a folder in Explorer and click Cleanup and then have my script run on this folder. So my question is: How do I add a right click menu action that runs a custom batch script?

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• How do I revert back to official Linksys firmware from dd-wrt on WRT56G2 v1?

  - by Chris Moore

  I've been having trouble with dd-wrt on my Linksys WRT56G2 v1 router and want to go back to the stock Linksys firmware for it. The router has only 2MB of flash memory, and so I'm running the 'micro' version of dd-wrt. My question is what is the best way to do that? I could use the http://router/Upgrade.asp dd-wrt "firmware upgrade" web interface to do it, in which case there's a dropdown menu choice for "After flashing, reset to": "don't reset" or "reset to default settings". Which should I pick? Some people say that I should use a program called tftp.exe instead. I can probably gain access to a Windows machine if this is necessary. Which of these is the way to proceed? I don't want to brick the router if at all possible! Note: I used the 'wrt54g' tag because I wasn't allowed to create a 'wrt54g2' tag due my low rep here.

  Read the article

• Configure GNU screen so that it stores command histories in files

  - by user65950

  I would like to configure GNU screen such that it stores the command histories of all the different windows in different files. I know by default GNU screen does not store the command histories (of its different windows) in a file at all (it stores them in memory instead), but it might be possible to tell it to store them in files instead? The different command history files should have the names <session>.<window>.history, or similar. Does anyone have an idea how to do that? (Just to be clear, I want each GNU screen window to write a different file. I like that each window has a different history, and I typically run different types of commands in the different windows.)

  Read the article

• What do YOU want to see in a SharePoint jQuery Session?

  - by Mark Rackley

  Hey party people. So, as you have probably realized by now, I’ve been using quite a bit of jQuery with SharePoint. It’s pretty amazing what you can actually accomplish with a little stubbornness and some guidance from the gurus. Well, it looks like I’ll be putting together a SharePoint jQuery session that I will be presenting at a few conferences. This is such a big and broad topic I could speak on it for hours! So, I need YOUR assistance to help me narrow down what I’ll be focusing on. Some ideas I have are: How to even get started; how to set up SharePoint to work with jQuery What third party libraries exist out there that integrate well with SharePoint How to interact with default SharePoint forms and jQuery (cascading dropdowns, disabling fields, etc..) What is SPServices and how can you use it When should you NOT use jQuery What do YOU want to see though? This session is for YOU guys, not for me. Please take a moment to leave a comment below and let me know what you would like to see and learn. Thanks, and I look forward to seeing you in my sessions!! Mark

  Read the article

• How to remove the dlinksearch browser search hijack

  - by Bish

  Hi Gang, For the last few weeks all the machines on my home network are having the same problem whilst browsing the internet. When the user enters an invalid URL in the browser address bar, instead of the default browser behaviour, the request is sent to http://www1.dlinksearch.com/. As far as I can tell this is all machines and all browsers. It is so consistent I am wondering whether it has anything to do with our router. We use a DLink DIR-655 router so maybe the clue is in the name :) Anyhow, I cannot figure out how to disable/remove the offending behaviour. I've checked hosts files, spyware, AV etc. etc. Anybody have any ideas? Paul P.S. Apologies if this is not the right place to ask this type of question. I'm a bit stuck

  Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >