Search Results

Search found 25727 results on 1030 pages for 'solution'.

Page 503/1030 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

• Personal Software Process (PSP1)

  - by gentoo_drummer

  I'm trying to figure out an exercise but it doesn't really makes to much sense.. I'm not asking someone to provide the solution. just to try and analyse what needs to be done in order to solve this. I'm trying to understand which PSP 1.0 1.1 process I should use. PROBE? Or something else? I would greatly appreciate some help on this one from someone that has experience with the Personal Software Process Methodology.. Here is the question. For the reference case (“code1.c”), the following s/w metrics are provided: man-hours spent in implementation phase (per-module): 2,7 mh/file man-hours spent in testing phase (per-module): 4,3 mh/file estimated number of bugs remaining (per-module): 0,3 errors/function, 4 errors/module (remaining) Based on the corresponding values provided for the reference case, each of the following tasks focus on some s/w metrics to be estimated for the test case (“code2.c”): [25 marks] (estimated) man-hours required in implementation phase (per-module) [8 marks] (estimated) man-hours required in testing phase (per-module) [8 marks] (estimated) number of bugs remaining at the end of testing phase (per-module) [9 marks] Tasks 4 through 6 should use the data provided for the reference case within the context of Personal Software Process level-1 (PSP-1), using them as a single-point historic data log. Specifically, the same s/w metrics are to be estimated for the test case (“code2.c”), using PSP as the basic estimation model. In order to perform the above listed tasks, students are advised to consider all phases of the PSP software development process, especially at levels PSP0 and PSP1. Both cases are to be treated as separate case-studies in the context of classic s/w development.

  Read the article

• small light laptop with docking station that has a PCI(e) slot

  - by laramichaels

  Hi everyone, I am looking for a new laptop/netbook and I have two simple requirements: must be small (10-12in screen) and light (<=3-3.5pounds); must work with a dock into which I can put a PCI or PCI Express card. Basically, I have no performance requirements. Discontinued or low-end are fine. All I want is something easy to carry that when at work I can use a PCI/PCI Express card with to do multi-head. Eg, if an Acer Aspire 1410 fitted the second requirement I would by one in a blink. The only solution with which I am acquainted are Thinkpads that can go into the Thinkpad Advanced Dock. Do other laptop (or netbook brands) also offer the possibility of using Although this is not a "requirement" per se, I would rather hear about options that would not involve buying the latest-greatest-+$2k model... : ) Thank you for any advice! ~lara

  Read the article

• Integrated Graphics and Audio as Media Center?

  - by Will

  I'm considering setting up a PC as a Media Center. Mainly to watch movies (ideally HD quality) and listening to music, but also to perform tasks like e-mail, web browsing, ... I quite like the looks and the price of this barebone: http://www.asus.de/Barebone_PC/S_Series_7L/S2P8H61E However it comes with integrated graphics and audio and only has one free PCI-Express slot. Which would mean in the worst case, where both integrated graphics and audio turn out to be insufficient, I could only upgrade one. So is integrated graphics and audio sufficient for a media center solution? Cheers, Will

  Read the article

• Team Foundation Service Preview now open for all!

  - by Tarun Arora

  The concept of TFS in the cloud was first presented back in early 2010, the product team worked hard to preview a constantly evolving solution at the BUILD conference last year and after having completed 31 Sprints today the preview service has been opened for all. No more invitation codes required, TfsPreview has been made public! “Since we announced the Team Foundation Service Preview at the BUILD conference last year, we’ve limited the on boarding of new customers by requiring invitation codes to create accounts.  The main reason for this has been to control the growth of the service to make sure it didn’t run away from us and end up with a bad user experience.  In this time period, we’ve continued to work on our infrastructure, performance, scale, monitoring, management and, of course, some cool new features like cloud build. ”   - Brian Harry Since the service is still in preview, it is free for all… If you haven’t, now is the best time to try out the offering. There is no fixed time line on how long before service becomes chargeable but the terms of service support production use, the service is reliable and the product team committed to carry all of your data forward into production. “The service will remain in “preview” for a while longer while we work through additional features like data portability, commercial terms, etc but the terms of service support production use, the service is reliable and we expect to carry all of your data forward into production. ”  - Brian Harry As of today it’s possible to use TFS Preview with VS 2012 RC, VS 2010 SP1, VS 2008 SP1, the service currently does not work with VS 2005, this is something the product team is actively working on. You can refer to Brian’s announcement blog post here, http://blogs.msdn.com/b/bharry/archive/2012/06/11/team-foundation-service-preview-is-public.aspx

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• Power cut during Ubuntu upgrade to 10.04 - boots to command line, apt-get and dpkg do not work.

  - by Macha

  I was upgrading Ubuntu to 10.04, when a tripswitch tripped, cutting power to the computer. When it was restarted, it booted into a command line prompt. Google tells me to try: sudo dpkg --configure -a This gets me a lot of output that ends with a list of packages. I can't tell you what the output is, as piping the output to more/less does not work (still just all scrolls by and moves to next prompt), and redirecting it to a file just results in an empty file. Google also suggested: sudo apt-get install -f This also didn't work. Is a fresh install the only solution at this point?

  Read the article

• Entity Framework and distributed Systems

  - by Dirk Beckmann

  I need some help or maybe only a hint for the right direction. I've got a system that is sperated into two applications. An existing VB.NET desktop client using Entity Framework 5 with code first approach and a asp.net Web Api client in C# that will be refactored right yet. It should be possible to deliver OData. The system and the datamodel is still involving and so migrations will happen in undefined intervalls. So I'm now struggling how to manage my database access on the web api system. So my favourd approch would be us Entity Framework on both systems but I'm running into trouble while creating new migrations. Two solutions I've thought about: Shared Data Access dll The first idea was to separate the data access layer to a seperate project an reference from each of the systems. The context would be the same as long as the dll is up to date in each system. This way both soulutions would be able to make a migration. The main problem ist that it is much more complicate to update a web api system than it is with the client Click Once Update Solution and not every migration is important for the web api. This would couse more update trouble and out of sync libraries Database First on Web Api The second idea was just to use the database first approch an on web api side. But it seems that all annotations will be lost by each model update. Other solutions with stored procedures have been discarded because of missing OData support and maintainability. Does anyone run into same conflicts or has any advices how such a problem can be solved!

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• How to write your unit tests to switch between NUnit and MSTest

  - by Justin Jones

  On my current project I found it useful to use both NUnit and MsTest for unit testing. When using ReSharper for running unit tests, it just simply works better with NUnit, and on large scale projects NUnit tends to run faster. We would have just simply used NUnit for everything, but MSTest gave us a few bonuses out of the box that were hard to pass up. Namely code coverage (without having to shell out thousands of extra dollars for the privilege) and integrated tests into the build process. I’m one of those guys who wants the build to fail if the unit tests don’t pass. If they don’t pass, there’s no point in sending that build on to QA. So making the build work with MsTest is easiest if you just create a unit test project in your solution. This adds the right references and project type Guids in the project file so that everything just automagically just works. Then (using NuGet of course) you add in NUnit. At the top of your test file, remove the using statements that refer to MsTest and replace it with the following: #if NUNIT using NUnit.Framework; #else using TestFixture = Microsoft.VisualStudio.TestTools.UnitTesting.TestClassAttribute; using Test = Microsoft.VisualStudio.TestTools.UnitTesting.TestMethodAttribute; using TestFixtureSetUp = Microsoft.VisualStudio.TestTools.UnitTesting.TestInitializeAttribute; using SetUp = Microsoft.VisualStudio.TestTools.UnitTesting.TestInitializeAttribute; using Microsoft.VisualStudio.TestTools.UnitTesting; #endif Basically I’m taking the NUnit naming conventions, and redirecting them to MsTest. You can go the other way, of course. I only chose this direction because I had already written the tests as NUnit tests. NUnit and MsTest provide largely the same functionality with slightly differing class names. There’s few actual differences between then, and I have not run into them on this project so far. To run the tests as NUnit tests, simply open up the project properties tab and add the compiler directive NUNIT. Remove it, and you’re back in MsTest land.

  Read the article

• Simplest way to render image over top of another with another image used as mask in OpenGL?

  - by Adam Naylor

  The effect I'm looking for is to have a single large background image that is always visible (at full alpha) and then show a second image (what I call a light map or specular map) that is partially shown over the top based on a third image (which is effectively a mask). The effect is similar to this effect except instead of simply darkening or lightening the background image using the third image it needs to mask the second without effecting the first at all. The third image is the only one that moves therefore hard baking the third images alpha into the second image isn't an option. If my explanation isn't clear I'll provide visual examples when I have more time. I'd prefer not to go down a shader route as I haven't taught myself this area yet so unless I have too I'd rather try to achieve this with simple alpha blending. Happy to use a shader approach. Cheers. Additional These third images are obviously light sources being cast onto the first image showing the specular information from the second image to simulate the light 'shining' off the objects in the first image. The solution I implement will need to allow two light sources to potentially overlap so my current thoughts are that the alpha values of the two images will need to be combined (Added?) to produce a final image which masks the second image? Don't worry about things like coloured lights. For this technique the lights are all considered white.

  Read the article

• O'Reilly deals to April 5, 2012 14:00 PT on books on "where"

  - by TATWORTH

  At http://shop.oreilly.com/category/deals/where-conference.do, O'Reilly are offering a series of books on geo-location at 50% off until April 5, 2012 14:00 PT. HTML5 Geolocation Truly revolutionary: now you can write geolocation applications directly in the browser, rather than develop native apps for particular devices. This concise book demonstrates the W3C Geolocation API in action, with code and examples to help you build HTML5 apps using the "write once, deploy everywhere" model. Along the way, you get a crash course in geolocation, browser support, and ways to integrate the API with common geo tools like Google Maps. HTML5 Cookbook With scores of practical recipes you can use in your projects right away, this cookbook helps you gain hands-on experience with HTML5’s versatile collection of elements. You get clear solutions for handling issues with everything from markup semantics, web forms, and audio and video elements to related technologies such as geolocation and rich JavaScript APIs. Each informative recipe includes sample code and a detailed discussion on why and how the solution works. Perfect for intermediate to advanced web and mobile web developers, this handy book lets you choose the HTML5 features that work for you—and helps you experiment with the rest. HTML5 Applications HTML5 is not just a replacement for plugins. It also makes the Web a first-class development environment by giving JavaScript programmers a solid foundation for building industrial-strength applications. This practical guide takes you beyond simple site creation and shows you how to build self-contained HTML5 applications that can run on mobile devices and compete with desktop apps. You’ll learn powerful JavaScript tools for exploiting HTML5 elements, and discover new methods for working with data, such as offline storage and multi-threaded processing. Complete with code samples, this book is ideal for experienced JavaScript and mobile developers alike. There are also other books being offered at a discount at http://shop.oreilly.com/category/deals/where-conference.do

  Read the article

• Distributed Development Tools -- (Version control and Project Management)

  - by Macy Abbey

  I've recently become responsible for choosing which source control and project management software to use for a company that employs me. Currently it uses Jira (project management) and Subversion (version control). I know there are many other options out there -- the ones I know about are all in this article http://mashable.com/2010/07/14/distributed-developer-teams/ . I'm leaning towards recommending they just stay with what they have as it seems workable and any change would have to be worth the cost of switching to say github/basecamp or some other solution. Some details on the team: It's a distributed development shop. Meetings of the whole team in one room are rare. It's currently a very small development team (three developers). The project management software is used by developers and a product manager or two. What are you experiences with version control and project management web applications? Are there any you would recommend and you think are worth the switching cost of time to learn new services / implementing the change? Edit: After educating myself further on the options it appears DVCS offer powerful benefits that may be worth investing in now as opposed to later in the company's lifetime when the switching cost is higher: I'm a Subversion geek, why I should consider or not consider Mercurial or Git or any other DVCS?

  Read the article

• how to find the clientname of an remote desktop session?

  - by Hemal Pandya

  We have servers on which we run tests and all users connect using the same credentials. The server allows 2 connections. What happens often is that one user is already active and the other two users keep hijacking the remaining session. Using query session, I can find out what are the active connections. But it does not list the client machine from where the session originates, which taskmanager displays. How do I get this information from a remote machine? I prefer a command line solution. Thanks in advance.

  Read the article

• Virtualization of desktop

  - by Agares

  Hi! I'm thinking about virtualization of my laptop(for educational purposes). My idea is to install very light host OS and have all the rest as virtual machines. Microsoft's Hyper-V Standalone would be very good solution, but it's impossible to access virtual machine from computer, where the Hyper-V is the host(isn't it?). So, which virtualization software would be good for me? I wanna have virtualized Windows 7(and maybe some other windowses). My processor support Intel Virtualization Technology.

  Read the article

• Transferring Conditional Formatting (without the cell value) in Excel

  - by london

  If I have 3 layers of conditional formatting in a cell (B2) is there a way of transferring the format of cell (B2) to another cell (A2) without copying across the value in the original cell (B2). I.e. in b2 I have conditional formatting dependent on what is selected from a drop down list of 4 options). I want the format to be copied across the the cell before this (A2) without the values being copied across. Essentially A2 has the title and B2 has the value but I would like the same formatting across both. I have manged to do it by setting A2 as ="Title "&B2 and applying conditional formatting to this. The spacing means the text from B2 doesn't show. This works but is really ugly. Is there a better way givern there ae too many conditions for a standard IF function. (if possible the solution should be windows 2003 compatible)

  Read the article

• HP Cue-Scanning Flow component freezes

  - by Nathan Fellman

  I am trying to scan with an HP network scanner (actually E6500 all-in-one). Whenever I try to scan, it starts up a flash screen with HP Scanning written all over it, which proceeds to do nothing. Digging in, I found that the process that gets stuck is hpqkygrp.exe, aka "HP CUE-Scanning Flow Component". This happened when I tried scanning from onenote or from the HP Solution Center. However, it seems that scanning from Windows' Fax and Scan utility works fine. As a (probably related) side-note, scanning directly from the scanner (using the buttons on its panel) doesn't work either. How can I keep this process from getting stuck?

  Read the article

• need recommendation for running PHP/Zend based optimizer

  - by senorsmile

  Firstly, I must admit that I don't know much about setting up PHP beyond the basics. I have an Ubuntu 10.04 server system (hosted) running primarily as an FTP store for a commercial store software. The server that the commercial store is installed on is unfortunately not very reliable, and would like to move that to this Ubuntu 10.04 server. (We've already received permission from the store vendor to do this.) My problem is that they use Zend optimizer which is only compatible with PHP 5.2. I have tried a couple of "hacks" to downgrade PHP to 5.2, but it breaks so many other things that it doesn't seem worth it. My idea is to install some sort of container of Ubuntu 8.04 (like OpenVZ) on the server to house a native install of PHP 5.2 to meet the dependency of the store software. However, it appears that OpenVZ is no longer supported on Ubuntu. Is there another solution similar that I could run on a hosted server to installed a separate "container-like" 8.04 system?

  Read the article

• BizTalk 2009 - Scoped Record Counting in Maps

  - by StuartBrierley

  Within BizTalk there is a functoid called Record Count that will return the number of instances of a repeated record or repeated element that occur in a message instance. The input to this functoid is the record or element to be counted. As an example take the following Source schema, where the Source message has a repeated record called Box and each Box has a repeated element called Item: An instance of this Source schema may look as follows; 2 box records - one with 2 items and one with only 1 item. Our destination schema has a number of elements and a repeated box record.  The top level elements contain totals for the number of boxes and the overall number of items.  Each box record contains a single element representing the number of items in that box. Using the Record Count functoid it is easy to map the top level elements, producing the expected totals of 2 boxes and 3 items: We now need to map the total number of items per box, but how will we do this?  We have already seen that the record count functoid returns the total number of instances for the entire message, and unfortunately it does not allow you to specify a scoping parameter.  In order to acheive Scoped Record Counting we will need to make use of a combination of functoids. As you can see above, by linking to a Logical Existence functoid from the record/element to be counted we can then feed the output into a Value Mapping functoid.  Set the other Value Mapping parameter to "1" and link the output to a Cumulative Sum functoid. Set the other Cumulative Sum functoid parameter to "1" to limit the scope of the Cumulative Sum. This gives us the expected results of Items per Box of 2 and 1 respectively. I ran into this issue with a larger schema on a more complex map, but the eventual solution is still the same.  Hopefully this simplified example will act as a good reminder to me and save someone out there a few minutes of brain scratching.

  Read the article

• Unable to load memcache.so extension ??

  - by billyduc

  I built php from source with configure command : './configure' '--prefix=/usr/local/php-5.2.8' '--with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d' '--with-apxs2=/usr/local/httpd/bin/apxs' '--with-mysql=/usr/local/mysql/' '--with-zlib' I installed php memcache extension : wget http://pecl.php.net/get/memcache tar -zxvf memcache-2.2.5.tgz cd memcache-2.2.5 phpize ./configure --enable-memcache make make install I add to my /usr/local/lib/php.in extension=memcache.so Rebooted my apache and run php-m but php seem doesn't load memcache extension I followed this solution from this site http://www.howtoforge.com/forums/showthread.php?t=26554 I added full path extension=/usr/local/lib/php/extensions/no-debug-non-zts-20060613/memcache.so rebooted apache But it didn't load memcache extension ! I google around but the same issue ! How can I load this extension _ _"

  Read the article

• Setup secure shared hosting (Apache, PHP, MySQL)

  - by Apaz

  So I'm setting up a shared hosting with Apache, PHP, MySQL and the biggest question mark is how to do with PHP, since there is a million options out there how to configure it securely. The plan is: Chroot for MySQL (built in support for chroot) Chroot for Apache (mod_security) Each user executing their PHP-scripts as their own user (see below) Set open_basedir Disable all "evil" php-functions (allow_url_fopen, system, exec, and so on) Ive looked at suexec and suphp but they seems very slow; http://blog.stuartherbert.com/php/2007/12/18/using-suexec-to-secure-a-shared-server/ http://blog.stuartherbert.com/php/2008/01/18/using-suphp-to-secure-a-shared-server/ So I've looked some more and found some other solutions: apache2-mpm-itk + mod_php(?) mod_fcgid + php-fpm mod_fastcgi + php-fpm Ive tried a simple setup with mod_fastcgi + php-fpm and it seems to work, runs as correct user and so on, but the protection against directory traveling is still open_basedir(?) One solution for that could be to use php-fpm's chroot option, but that causes a lot of other issues like domain name resolver does not work sending mail does not work Tips?

  Read the article

• Printer Brother DCP-110C Linux 64-bit drivers

  - by Ondra Žižka

  Hi, I need 64-bit Linux driver for DCP-110C (for Ubuntu 10.04 64-bit) I found only 32-bit here. http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html I've tried to follow those instructions. During the installation, I got this: ondra@ondra-doma:~/Downloads$ sudo dpkg -i --force-all dcp110clpr-1.0.2-1.i386.deb dpkg: warning: overriding problem because --force enabled: package architecture (i386) does not match system (amd64) (Reading database ... 257283 files and directories currently installed.) Preparing to replace dcp110clpr 1.0.2-1 (using dcp110clpr-1.0.2-1.i386.deb) ... Unpacking replacement dcp110clpr ... Setting up dcp110clpr (1.0.2-1) ... ln: creating symbolic link `/usr/lib/libbrcompij2.so.1.0': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so.1': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so': File exists After installation, the printer is listed at the cups server, but does not work (no command has any effect on printer (which is, of course, on and connected)). Anyone has found some working solution? Thanks, Ondra

  Read the article

• X11 for apache user

  - by fuenfundachtzig

  We are using inkscape to convert SVG images uploaded to our server via a web form. For this inkscape offers a batch mode via the -z option, but this batch mode has a flaw: When inkscape is run by the apache user, it breaks saying $ inkscape -z -W drawing.svg X11 connection rejected because of wrong authentication. The application 'inkscape' lost its connection to the display localhost:11.0; most likely the X server was shut down or you killed/destroyed the application. If you do the same as a normal user you also get errors: Xlib: connection to "localhost:11.0" refused by server Xlib: PuTTY X11 proxy: MIT-MAGIC-COOKIE-1 data did not match (inkscape:24050): Gdk-CRITICAL **: gdk_display_list_devices: assertion `GDK_IS_DISPLAY (display)' failed 301.27942 But at least inkscape gives the correct answer (here the number stating the width of the image). Does somebody know how to make this also work for the apache user? Does it make sense to authorize apache to use X (if so how)? In any case it doesn't feel like the right solution...

  Read the article

• Recommended way to restrict Apache users

  - by Dor

  Following on why should we restrict Apache users, another two questions arises: What is the recommended method of restricting the places Apache users can traverse & read in the file system? What to do against fork bombs and other shell scripting problems? (bash scripting is allowed) My possible solutions (I prefer to know which solution you choose and why): chroot OR mod_chroot disable bash OR use Restricted BASH Please offer another solutions if you find appropriate. (perhaps selinux is?) Current status: Users are allowed to executed bash scripts (via PHP for example) suexec is active Apache requested are served with FastCGI for PHP

  Read the article

• CodePlex Daily Summary for Thursday, July 25, 2013

  CodePlex Daily Summary for Thursday, July 25, 2013Popular ReleasesEnglish Practice Helper: English Practice Helper Demo v1.0: The first demoTweetinvi a friendly C# Twitter API: Alpha 0.8.0.1: This is the first release of Tweetinvi. Please report any issue in the discussion or issues. Sincerely, LinviKartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.VG-Ripper & PG-Ripper: VG-Ripper 2.9.45: changes NEW: Added Support for "ImgBabes.com" links NEW: Added Support for "ImagesIon.com" linksMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SMSGateWay: SMSGateWayLaunch: CMPP,SGIP,SMGP ????SP?? ??,????,????,????,VPS??,?????,???. ??????,????,?????,????......????? ????SPID ,MsgSrc,???,???IP,?????? ?????,?????,??,???? ??QQ:3483305Centrify DirectControl PowerShell Module: 1.5.709: -fix- Computer password is correctly set when preparing Computer account for Self-Service join and hostname is longer than 14 charsDLog: DLog v1.0: Log v1.0SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.PantheR's GraphX for .NET: GraphX for .NET v0.9.5 BETA: BETA 0.9.5 + Added GraphArea.SaveAsImage() method that supports different image formats + Added GraphArea.UseNativeObjectArrange property. True by default. If set to False it will use different coordinates handling that helps to soften vertex drag issues to the top and left area sides. + Added GraphArea.Translation property. It is needed to get correct translation coordinates when determining object position from the mouse coordinates. + Added new VertexControl.PositionChanged event along wit....NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...New ProjectsActive Directory Web App Availability Monitor for SCOM 2012: Extend the web application availability monitoring in System Center Operations Manager 2012 with the ability to monitor Active Directory Authenticated Web SitesArgoWinform: ArgoWinform ASP.NET Routing Optional Parameters in body of Urls: This library allows ASP.NET MVC developers to have custom parameters in the body of Urls. Routes that are defined by this library accepts a LookupService that wAutomate Variations in SharePoint 2013 using C#: Automating variations settings and configuration so whenever a deployment is needed, you will be ready with your PowerShell scripts.Automate Variations in SharePoint 2013 using PowerShell: Automating variations settings and configuration so whenever a deployment is needed, you will be ready with your PowerShell scripts.BingosoftSwimming: ?????????ContentCreator for Orchard: Orchard Module that is suposed to replace the Orchard.ContentPicker module by letting you create contentItems directlyGET - General Emitter Templates: GET: General Emitter Templates. Language: C# Given a data file (in xml format), it models the data according with the directives specified in the template file.GTS Project: This project is a private personal educational project to study and learn DNN and ASP.NET MVCJustCompare: Just Compare is human made tool to help humans to compare two digital files. We are now concentrating on source code files only. Media Tool: A collection of tool to manage media files (Pictures and videos)MVVMlight Navigation Service for Windows Phone 8: A simple project to make navigation in MVVMlight on windows phone faster.Qibla Compass for Windows Phone: Qibla compass is one of the mostly used community applications/utility among Muslims. It allows users to determine the correct location / direction of Ka’aba.QuickWebLauncherWP: Una aplicación para windows phone para leer fuentes de sindicación y coleccionar enlaces a los artículos que se desean leerSimpleBingWallpaper: It's a simple project for get bingwallpaper. if you like it. please +1.. ThanksStyrApp: Template Application for technology testingTataFm: Tata FM for Windows 8 app.TimeZoneInfoForm: Exercises timezone related classes and methods in .NET. It can be used as sample code or to troubleshoot suspected timezone issues in .NET.Wix Test: *WIX Test Solution* - is a simple WIX solution for learning some new features. This project is currently in setup mode and free.

  Read the article

• CodePlex Daily Summary for Saturday, May 17, 2014

  CodePlex Daily Summary for Saturday, May 17, 2014Popular ReleasesSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...Better Robocopy GUI: Command Line GUI for Robocopy: Better Robocopy GUI had become the primary plugin in Command Line GUI built on .NET 4CTI Text Encryption: CTI Text Encryption 5.3: Change Log: - Remove read only behavior of text area of encrypted text. - Minor UI functionality update.Mini SQL Query: Mini SQL Query (1.0.71.456): Minor fixes and template corrections.QuickMon: Version 3.10: Adding the ability to see 'history' of Collector states (including details of errors or warnings at that time). The history size is configurable (default is switched off) and the Windows Service completely ignores keeping history (no UI or user to access it anyway). The Collector stats window now displays this history plus multiple collector stats windows can be opened at the same time. Additionally fixed a bug in the event log collector that reported an 'Error' state when an 'out of bounds' ...TFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...WinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.Aspose for Sitefinity: Sitefinity Export to Microsoft Word and PDF: Aspose Sitefinity Content Export Add-on allow users to export online content into Microsoft Word or Adobe Acrobat PDF document using Aspose.Words. This Add-on makes it very simple and easy to have an offline copy of your favorite online content for editing, sharing and printing etc. in popular Microsoft Word Doc/Docx or PDF format. It adds simple Export to Word and Export to Pdf buttons at any desired location on the page and clicking the button dynamically exports the content of the page int...MVCwCMS - ASP.NET MVC CMS: MVCwCMS 2.2.2: Updated CKFinder config. For the installation instructions visit the documentation page: https://mvcwcms.codeplex.com/documentationTerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...ParserIO: ParserIO v1.0.0.3: Fixed some bug about AIM Symbology IDSSIS SFTP Task Control Flow Component: SSIS SFTP v2 for SQL Server 2012: Please report you to the Documentation page for installation instructions.Grade Calculator For BTEC First Diploma in IT level 2: Grade Calculator For BTEC First Diploma in IT: Grade Calculator For BTEC First Diploma in IT level 2Spaghetti CMS: Version 1.50: New: Backend with new design, bootstrap integration New: Patch function for assigning themes, master page files to pages New: Wysiwyg editor (possible to link css file against editor) and filemanager New: Support time triggered content New: Edit css, js, skin, master file within the CMS New: Dynamically add controls to the CMS New: Change password for an user (usermanagement) New: Localize CMS In the near future we will open our new website for documentation and demo. http://...ExtJS based ASP.NET Controls: FineUI v4.0.6: FineUI（???） ?? ExtJS ??? ASP.NET ??? FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ??????? ?????? IE 8.0+、Chrome、Firefox、Opera、Safari ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license) ???? ??：http://fineui.com/ ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI ???? ExtJS ????????，???? ExtJS ?，?????： 1. ????? FineUI ? ExtJS ? http://fineui.com/bbs/forum.ph...Office App Model Samples: Office App Model Samples v2.0: Office App Model Samples v2.0Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelNew ProjectsAllowing Multiple Attachments for SharePoint 2013 Custom Lists: This code supports basic upload multiple attachments to Custom List item and should be able to attach the existing file name override.Azure File Depot: The Azure File Depot is an effort to provide sample implementations of various tasks related to using blob storage to move files around.CRM Customization Comparer - 2011 and 2013: Compare your Dynamics CRM Solution files via XML Diff. Graphical interface to quickly assess changes. Features: - Graphical UI - Supports CRM 2011 and 2013ElectrosLtd DSA Assignment: This program was created in order to make use of models views and controllersGPS Tracking: A GPS Tracker App.OOP-2112110195: mon:OOP ten:mai duy tanPowerShell Task Control Flow Component for SSIS: Launch PowerShell Script/Commands from SSIS - An another Custom Control Flow Component with the new "PowerShell Task" (currently targets PowerShell 3.0)Quan ly giai bong da: Qu?n lý gi?i bóng dá ngo?i hang AnhSharePoint PDF OpenDocument: SharePoint PDF Content type (Sandbox solution) One OpenDocuments Com+ server for PDF content Adobe software not included but required.Useful Classes: Useful Classes is a DLL that I have written to include a ton of features from one file within your project. ??????-??????【??】??????????: ??????????????,??????????????????,????????,??????????????、????。 ??????-??????【??】??????????: ????????????????????,?????????。????????????,??????,????,????,?????????！ ????-????【??】????????: ????????????300??,????????、???????、????、????????、?????,??????:????,????,???????！ ?????-?????【??】?????????: ?????????????????????,?? ???????,??????? ???,????? , ???? ?????,?????????????。 ?????-?????【??】?????????: ???????????? , ???? ?????,??????????????,????,????,??????。 ??????-??????【??】??????????: ????????????????,????(??)????????，??????，????，???，????，???????! ??????-??????【??】??????????: ?????????????????????,????????,????????,????,????,??????，???????! ?????-?????【??】?????????: ?????????????????,?????,???，???、???、?????,???,?????,???????????????. ?????-?????【??】?????????: ???????????:???????,????,????,????,??????????,????,????,????。??????... ?????-?????【??】?????????: ??????????????????????，?????、???、????，????，???、???、???、???、???，????，?????！ ??????-??????【??】??????????: ????????????、??、???????????,??????,????????,??????????????????...????。 ????-????【??】????????: ??????????????????????,?????????,??????????,????????,?????! ????-????【??】????????: ?????????????、???????,?????????,???????????????,?????????????。 ?????-?????【??】?????????: ?????????????、?????????,?????????,????,????????,????????????????! ?????-?????【??】?????????: ?????????????????,????????,??????????????,?????????,????,????,??????。

  Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >