Search Results

Search found 22961 results on 919 pages for 'memory management'.

Page 504/919 | < Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >

  • Server Hardware on the Desktop

    - by jcnnghm
    When I rebuild my desktop, I'm thinking of using server hardware instead of desktop hardware. I want to do this so I can easily add a lot of ECC memory (~20GB), and possibly more than one processor. I know that video hardware could be a problem, especially because I use 4 monitors. I should be fine with this, as long as I have two pci-e channels. Are there any downsides to doing this? Anything I'm not seeing?

    Read the article

  • Does the size of monitor Matters ?

    - by Arsheep
    I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

    Read the article

  • Does the size of monitor Matters ?

    - by Arsheep
    I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

    Read the article

  • how to set up a git repository which can be accessed by network in ubuntu 12.10

    - by hguser
    Now we want to set up a private git repository in the ubuntu 12.10,then other developments can access it through the local network. Now I just can create a repository use git init,for example: cd myproject git init Which will create .git directory,but I do not know how to access it thougth network like: git://192.168.1.1/myproject/.git Any idea? BTW,I have tried: git init --bare which will give me a error: git add error : "fatal : malloc, out of memory"

    Read the article

  • Recovery Harddisk for windows 7 (Details inside)

    - by iSumitG
    I want to create recovery media (DVD or HDD) for my Windows 7 running on my VAIO laptop. I noticed that my HDD is already having 13.51 GB partition which is labelled as "Recovery Partition" (not visible in My Computer but visible in Computer management tool in control panel). Can you please suggest me how to use this Recovery partition as a recovery media for my windows? I don't want to create DVDs as recovery media.

    Read the article

  • How to figure out disks performance in Xen?

    - by cpt.Buggy
    So, I have a Dell R710 with PERC 6/i Integrated and 6 450Gb Seagate 15k SAS disks in RAID10, I have 30 Xen vps working on it. Now I need to deploy second server with same hardware for same tasks and I want to figure out maybe it's a good idea to use RAID5 instead of RAID10 because we have a lot of "free" memory on first server and not so much "free space". How do I find out disks performance on first server and find out could I move it to RAID5 without slowing down of whole system?

    Read the article

  • Forcibly Uninstalling Eclipse 3.5 Plugins

    - by Chris S
    How do you forcibly uninstall Eclipse 3.5 plugins without using Eclipse? I made the mistake of installing Google's Android SDK, and now when I try to check for updates via the "Check For Updates" or "Install New Software", some Android process runs, consumes all my CPU, takes up 3 gigs of memory, and crashes Eclipse. I can't even get to the uninstall dialog before Google's plugin kills everything.

    Read the article

  • Prefork or Worker MPM for amazon xlarge server?

    - by Netismine
    I'm trying to measure would it be better to have prefork or worker mpm apache module for the server I'm working on, which is Amazon X-Large 15 GB memory 8 EC2 Compute Units (4 virtual cores with 2 EC2 Compute Units each) and that will run a Magento website with about 50 active users at once. Site serves a lot of images and about 45 requests per page. Images sometimes hang, so it seems worker would be a better option? Thanks

    Read the article

  • SQL Server Full Text Search resource consumption

    - by Sam Saffron
    When SQL Server builds a fulltext index computer resources are consumed (IO/Memory/CPU) Similarly when you perform full text searches, resources are consumed. How can I get a gauge over a 24 hour period of the exact amount of CPU and IO(reads/writes) that fulltext is responsible for, in relation to global SQL Server resource usage. Are there any perfmon counters, DMVs or profiler traces I can use to help answer this question?

    Read the article

  • Configure APC for maximum hit rate

    - by Steven De Groote
    I'm currently running php5 with APC, the latter with default configuration. However after setting up munin to monitor APC, I'm surprised by the results: apc.shm_size: 30 apc.gc_ttl: 3600 apc.ttl: 0 Used: 14MB Request rate: 100 requests/second Fragmentation: 0 Hit ratio: 80% (dropping to 0 a few times per hour) So the obvious question: how can I adapt the configuration to achieve a higher hitrate. I find it very strange that the available memory is not fully used which the hitratio is still below what I would expect. Thank for any hints!

    Read the article

  • Is there a way to mirror two severs on Ubuntu?

    - by Kyle
    I was wondering if it's possible to mirror two servers, like you could upload files to one server and they'd push to the other server, etc. I'm more curious to file mirroring, it doesn't have to mirror package management and setup (But that'd be cool too!)

    Read the article

  • Does SDHC have any write error recovery ?

    - by marc
    What happen if SDHC card get write error (damaged cell / bad sector) ? Whole card is unusable (to trash, all data written to that sector now and in future will be lost) ? or rewrite sector (flash memory get corrupted when writing so maybe have any function to check if sector was written successfully) to another and mark as fault as unusable what will be seen as reduction of capacity but no data lost. I have to do some research about SD card-s on disk less machines. regards

    Read the article

  • CRC error when extracting to SSD from 2nd HDD

    - by gbn
    Hello I have a large RAR file (split up) containing an ISO on my 2nd HDD When I extract it: to the same HDD, it's OK to the system/OS SSD, I get CRC errors I've checked memory, run memtests, checked wires etc I have no other issues; only with this one RAR file Any ideas please?

    Read the article

  • Intel 82865G Graphics Controller - making it work in Windows 7

    - by abrams
    RE: Putting this out there in case someone else runs into this issue. The intel chipset is on-board. I discovered the reason for the crappy resolution in windows 7 was that the memory to share with the video card was set to 1MB in the BIOS. I changed this to 8MB (the maximum) and then the PC rebooted I was able to select a higher resolution. link|flag answered Aug 18 '09 at 5:53 Nick Kavadias Nick, Does this give Aero functionalty ?

    Read the article

  • TrueCrypt System Favorite Volume doesn't mount automatically on boot

    - by Anders Hovgaard
    I've encrypted my system partition using TrueCrypt and I've read that I can mount my encrypted data partition (TrueCrypt volume) on boot by making it a "System Favorite" and giving it the same password as the system partition. However it doesn't work and I have to mount it manually every time. See this example. I've tried enabling "Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)" in System - Settings, but that didn't change anything either. Any ideas?

    Read the article

  • Assist me access my firewall using ASDM

    - by ghp
    Have configured my asa 5520 with all the interfaces inside -- 10.11.12.1 outside - 70.71.72.4 Have not connected the management interface ..left it as is. Im remotely accessing this firewall from a different location by SSH, but would like to use the asdm to access it remotely. I have configured the HTTP SERVER enable and assigned http 10.11.12.254 255.255.255.255 inside Please can someone let me know the config which can help me access this firewall using ASDM.

    Read the article

  • system center operations manager (SCOM) role combinations

    - by KAPes
    We are evaluating system center operations manager 2007 R2 product, and would like to know what all roles can be combined onto single server. Like root management server and reporting servers can be on one box or not? my environment is like 450 servers mostly Exchange and Domain Controllers plus few OCS servers.

    Read the article

  • How can I recover my Transcend pendrive when both the used space and free space are 0 bytes?

    - by Debabratta
    I have an Transcend pendrive, and when I connect it and double click it to explore, it is showing the error: Please insert a disk into drive Also In the properties field it is showing File system- Unknown Used space- 0 bytes free space- 0 bytes capacity- 0 bytes I tried to format it using using the command prompt but it is not showing in the list disk command. It is also not showing in the Disk Management.

    Read the article

  • SQL Server Logs: missing date ranges

    - by Jeff
    I need to be able to export SQL Server logs into CSV files, which I can easily do with the export function. However in doing so I've noticed there's a range of dates missing from the SQL Server logs in Management Studio, two months actually. I'm wondering where these logs might be found, and if it's possible to reload them so I can view and then export them. They're strictly for informational purposes, but I do need them. Thanks in advance!

    Read the article

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • What software is used by buy-side investment companies?

    - by user44995
    What software is used by buy-side investment companies? For educational purposes, could anyone describe IT infrastructure of a typical buy-side investment company: a hedge fund, a mutual fund or a wealth management company. No particular details are needed, just what type of software is used how different software modules interact with each other. Am I asking too much?

    Read the article

  • Suggestion for software to control internet

    - by redknight
    I need to implement a gateway that will allow me to control the access to the internet of a network made up of a about half a dozen of workstations. My main obejectives are the following: 1- Monitoring of traffic 2- Logging of traffic 3- Access control - block websites (mainly adult) and certian traffic(example torrents) 4- Possibly cache content 5- Easy management interface 6- Preferable free and opensource Serverfault users can you please suggest from your vast experience which software you think is the best to suit my needs? Any suggestion is greatly appreciated. Thank you

    Read the article

< Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >