Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 505/1834 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

• OpenVZ multiple networks on CTs

  - by user6733

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• Connection to VPN using command line

  - by plurby

  I've wrote a simple batch file to connect to a specific VPN connection using RASDIAL rasdial MyVPNConnection but it always returned the error 691 Access denied because username and/or password is invalid on the domain. Remote Access Service (RAS) Error Code List then i tried pointing to my Remote Access Phonebook (Rasphone.pbk) and see what happens rasdial MyVPNConnection /phonebook:%userprofile%\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk and still there was an error 691. I've then unchecked the following but still the same problem was reported when executing my batch file.

  Read the article

• Oracle Error ORA-12560 TNS:Protocol Adapter error?

  - by David Basarab

  I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

  Read the article

• Slow http traffic between VMWare guest and host.

  - by toluju

  I have a web application running as an http server inside the VMWare guest OS, and I'm trying to access the content from the host OS. The guest is running Ubuntu, and the host is running Windows XP. The problem is, when I try to access the application from a browser in the host OS, the content takes a very long time to load (up to a minute for a single page). A browser in the guest OS can access the application with no problems. I've tried using both NAT and bridged networking, but the results are the same. The Windows firewall is turned off. The connection itself appears fine, as ping requests from guest to host as well as host to guest complete without errors or delays. Both guest and host can access the external Internet connection without a problem. I'm using VMWare Player. Any ideas?

  Read the article

• How Do I Reset My Root Password on MySQL on a Mac?

  - by classicrock985

  I'm using SequelPro (http://www.sequelpro.com/) and I would like to know how to reset my root password. I'm trying to log in as host: localhost username: root password: (BLANK) but I keep getting this error: Unable to connect to host because access was denied. Double-check your username and password and ensure that access from your current location is permitted. MySQL said: Access denied for user 'root'@'localhost' (using password: NO) Any suggestions?!

  Read the article

• How can I remove LibUSB on Windows 7?

  - by Cokegod

  I've installed LibUSB, a software that modifies your USB driver so that programs can access it easily. I didn't know that in Windows 7 you have to run it in compatibility mode for Windows XP, so now my Windows 7 can't access any USB port (including keyboard and mouse). Now I can't access my computer at all, and I don't have any PS2 connection in my computer. I tried to run it in Safe Mode but it didn't change anything. I tried to run a system restore from before the installation of LibUSB, but all the restore points give me an error: "The instruction at 0x73888f18 referenced memory at 0x00000004. The memory could not be read." I also tried to run Hiren's Boot CD and remove all the files associated with LibUSB, but that didn't change anything. So how can I remove LibUSB and access my computer again without formatting my hard drive? (I have important things on it)

  Read the article

• Help, my CentOS servers keep going down , No route to host after a random uptime

  - by user249071

  Hello , I have a couple of Centos linux servers, that have a very simple task, they run nginx + fastcgi for php , and some NFS mounts between them, readonly They have some RPC commands to start some downloading processes with wget, nothing fancy , from a main server, but their behavior is very unstable, they simply go down, we tried to monitor ram , processor usage, even network connections, they don't load up so much, max network connections up to... 250 max, 15% processor usage and memory , well, doesn't even fill up, 2.5GB from 8GB max , I have no ideea why can a linux server go down like that, they aren't even public servers, no domain names installed no public serving, for sites. The only thing that I've discovered was that if i didn't restart the network service every couple of hours or so... the servers were becoming very slow, starting apps very slow, but not repoting a high usage of resources...Maybe Centos doesn't free the timeout connections, or something like that...It's based on Red Hat right? I'm not a linux expert , but I'm sure that there are a few guys out there that can easily have an answer to this , or even have some leads to what i can do ... I haven't installed snort, or other things to view if we have some DOS attacks, still the scheduled script that restarts the network each hour should put the system back online, and it doesn't.... Thank you in advance

  Read the article

• Nginx deny doesn't work for folder files

  - by user195191

  I'm trying to restrict access to my site to allow only specific IPs and I've got the following problem: when I access www.example.com deny works perfectly, but when I try to access www.example.com/index.php it returns "Access denied" page AND php file is downloaded directly in browser without processing. I do want to deny access to all the files on the website for all IPs but mine. How should I do that? Here's the config I have: server { listen 80; server_name example.com; root /var/www/example; location / { index index.html index.php; ## Allow a static html file to be shown first try_files $uri $uri/ @handler; ## If missing pass the URI to front handler expires 30d; ## Assume all files are cachable allow my.public.ip; deny all; } location @handler { ## Common front handler rewrite / /index.php; } location ~ .php/ { ## Forward paths like /js/index.php/x.js to relevant handler rewrite ^(.*.php)/ $1 last; } location ~ .php$ { ## Execute PHP scripts if (!-e $request_filename) { rewrite / /index.php last; } ## Catch 404s that try_files miss expires off; ## Do not cache dynamic content fastcgi_pass 127.0.0.1:9001; fastcgi_param HTTPS $fastcgi_https; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; ## See /etc/nginx/fastcgi_params } }

  Read the article

• Apache2 Virtual Host broken; displayed default index.html on subdomain, but correct content on www.subdomain

  - by Robert K

  I've got a Linode configured as a Ubuntu 10.04.2 web server with Apache 2.2.14. I have a total of 4 sites, all defined under /etc/apache2/sites-available as virtual hosts. All sites are almost identical clones for configuration. And all sites but my last work successfully. default: (www.)exampleadnetwork.com (www.)example.com reseller.example.com trouble: client1.example.com I keep getting this page when I visit the client1.example.com site: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. In my ports.conf file I have the NameVirtualHost correctly set to my IP address on port 80. If I access the "www.sub.example.com" alias the site works! If I access it without the www I see the "It Works" excerpt posted above. Even apache2ctl -S shows that my vhost file parses correctly and is added to the mix. My vhost configuration file is as follows: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName client1.example.com ServerAlias client1.example.com www.client1.example.com DocumentRoot /srv/www/client1.example.com/public_html/ ErrorLog /srv/www/client1.example.com/logs/error.log CustomLog /srv/www/client1.example.com/logs/access.log combined <directory /srv/www/client1.example.com/public_html/> Options -Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </directory> </VirtualHost> The other sites are variations of: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName example.com ServerAlias example.com www.example.com DocumentRoot /srv/www/example.com/public_html/ ErrorLog /srv/www/example.com/logs/error.log CustomLog /srv/www/example.com/logs/access.log combined </VirtualHost> The only site the differs is the other subdomain: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName reseller.example.com ServerAlias reseller.example.com DocumentRoot /srv/www/reseller.example.com/public_html/ ErrorLog /srv/www/reseller.example.com/logs/error.log CustomLog /srv/www/reseller.example.com/logs/access.log combined </VirtualHost> Filenames are the FQDN without the www. prefix. I've followed this advice, but still cannot access subdomain properly.

  Read the article

• Can ping between Host and Guest, but can't acces webserver with Virtualbox

  - by Gastoni

  How come I can ping back and forth between host and guest using VirtualBox, but I can't access from the host the web server installed in the guest. I'm using a host-only network. Host Ubuntu 10.10 vboxnet0 - 192.168.56.1 ping to self, works ping to guest, works access to web server in guest, FAILS Guest Fedora 13 eth1 - 192.168.56.101 ping to self, works ping to host, works access to web server in host, works

  Read the article

• Set up Linux box as WAP for MyBookLive?

  - by AcidFlask

  I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

  Read the article

• VPN - local and remote networks IP collision

  - by Guido García

  I have created a VPN connection in Windows using the New Network Connection wizard that comes with Windows. It works without problems in most places, but there is one concrete place where, despite the connection to the remote public IP works fine, it is not able to validate the login/password and establish the VPN connection. In this place, the network is 10.0.0.x (the same I use in other places where I am able to connect). The remote network is 192.168.x.x, so I suspect there is some kind of IP collision, because before connecting, a traceroute to i.e. 192.168.0.40 does not fail. 1 4 ms 1 ms 1 ms LINKSYS [10.0.0.1] 2 5 ms 1 ms 1 ms 172.26.27.1 3 4 ms 5 ms 3 ms 192.168.1.100 ... (more) I can't modify the local network further than the first router (10.0.0.1). That is the only different I've found so far. Any idea about how to solve it? Thank you.

  Read the article

• Exchange 2007 with Android activesync

  - by lbanz

  A few of our users noticed that it will stop working intermittently for them. I didn't believe it at first until I changed my android phone and it started occuring for me. It will just stop syncing completely, it looks like the server is blocking the device completely. This mainly occurs when they are using the wifi. I've done some testing. If I switch off the wifi and use the phone data plan it will work fine. When it's on the wifi network, I try and browse to the webmail/owa page and it says page not found! I did a dns lookup and they resolve correctly. If I use another device on the same wifi network, it can access the exchange servers fine. Sometimes the wifi network will just work without any issues. But when it fails, it looks like the phone constantly checks the server every second to see if it is online even though I've got it on manual sync. I was wondering whether it tries to sync too many times and exchange thinks its a denial service attack. My old android phone that works is Froyo and the new one is Icecream. People who have reported issues seems to be newer phones. They also tested their own wifi network at home and experience the same problem. We haven't patch our exchange recently before seeing this problem. Anyone has seen this issue?

  Read the article

• Clustered MSDTC

  - by niel

  Hi I'm setting up a SQL cluster (SQL 2008), Windows 2008 R2. I enable the network access on local dtc and then create a DTC resource in my cluster . the problem is that when i start up the resource it does nto pull through my settings to enable network access. the log shows this: MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 0, Trasaction Manager Communication: Allow Inbound Transactions = 0, Allow Outbound Transactions = 0, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 0, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 where when i restart the local dtc service it says this: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 1, Trasaction Manager Communication: Allow Inbound Transactions = 1, Allow Outbound Transactions = 1, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 1, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = No Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 settings on both nodes in teh cluster is the same. I have reinstalled and restarted to many times to mention. Any ideas ?

  Read the article

• TCP dies on a Linux laptop

  - by Roman Cheplyaka

  Once in several days I have the following problem. My laptop (Debian GNU/Linux testing) suddenly becomes unable to work with TCP connections to the internet. The following things continue to work fine: UDP (DNS), ICMP (ping) — I get instant response TCP connections to other machines in the local network (e.g. I can ssh to a neighbour laptop) everything is ok for other machines in my LAN But when I try TCP connections from my laptop, they time out (no response to SYN packets). Here's a typical curl output: % curl -v google.com * About to connect() to google.com port 80 (#0) * Trying 173.194.39.105... * Connection timed out * Trying 173.194.39.110... * Connection timed out * Trying 173.194.39.97... * Connection timed out * Trying 173.194.39.102... * Timeout * Trying 173.194.39.98... * Timeout * Trying 173.194.39.96... * Timeout * Trying 173.194.39.103... * Timeout * Trying 173.194.39.99... * Timeout * Trying 173.194.39.101... * Timeout * Trying 173.194.39.104... * Timeout * Trying 173.194.39.100... * Timeout * Trying 2a00:1450:400d:803::1009... * Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable * Success * couldn't connect to host * Closing connection #0 curl: (7) Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable Restarting the connection and/or reloading the network card kernel module doesn't help. The only thing that helps is reboot. Clearly something is wrong with my system (everything else works fine), but I have no idea what exactly. I don't know how to reproduce this, but as I said, it happens every several days. My setup is a wireless router that is connected to the ISP via PPPoE. Any advice?

  Read the article

• Multi- authentication scenario for a public internet service using Kerberos

  - by StrangeLoop

  I have a public web server which has users coming from internet (via HTTPS) and from a corporate intranet. I wish to use Kerberos authentication for the intranet users so that they would be automatically logged in the web application without the need to provide any login/password (assuming they are already logged to the Windows domain). For the users coming from internet I want to provide traditional basic/form- based authentication. User/password data for these users would be stored internally in a database used by the application. Web application will be configured to use Kerberos authentication for users coming from specific intranet ip networks and basic/form- based authentication will be used for the rest of the users. From a security perspective, are there some risks involved in this kind of setup or is this a generally accepted solution? My understanding is that server doesn't need access to KDC (see Kerberos authentication, service host and access to KDC) and it can be completely isolated from AD and corporate intranet. The server has a keytab file stored locally that is used to decrypt tickets sent by the users coming from intranet. The tickets only contain username and domain of the incoming user. Server never sees the passwords of authenticated users. If the server would be hacked and the keytab file compromised, it would mean that attacker could forge tickets for any domain user and get access to the web application as any user. But typically this is the case anyway if hacker gains access to the keytab file on the local filesystem. The encryption key contained in the keytab file is based on the service account password in AD and is in hashed form, I guess it is very difficult to brute force this password if strong Kerberos encryption like AES-256-SHA1 is used. As the server has no network access to intranet, even the compromised service account couldn't be directly used for anything.

  Read the article

• Slow RDP after server joins domain

  - by Chris Grove

  We're having RDP issues with Amazon cloud servers that we recently joined to an Active Directory domain. The setup is: A local office network A virtual private cloud in Amazon An IPSec tunnel between the two networks A number of Windows 2008 R2 servers on both networks An AD domain (call it abc.net), with one domain controller in each network. The domain controllers are both new, fresh installs. Before we had the domain set up we had local accounts for the cloud computers which were used for RDP access. Our idea was to get all of the servers on to the domain so we could use domain logins instead of per-server local logins. Before the cloud servers were in the domain, RDP (from the office network or through a VPN to the cloud) worked great. After we joined the cloud servers to the domain, RDP from the office became very slow - a few minutes to log in, long frequent pauses when the interface is unresponsive, generally just a slow and frustrating experience. This is a problem regardless of whether a domain or local login is used for RDP. Oddly, when outside of the office network and connecting to the cloud directly with the VPN, RDP is still very responsive. Any idea why RDP from office to cloud is suddenly very slow after the cloud servers join the domain? What can I look at in our configuration to address this? Any help is greatly appreciated.

  Read the article

• Routing for remote gateway over VPN in Vista/7 broken?

  - by Raymond

  Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

  Read the article

• Mac: Cannot open the parent directory Library

  - by rolandbishop

  I really am about to go crazy because nothing worked out. I'm trying to access the Library folder on my OS Lion however all the tutorials related to this subject involves opening the user library however I would like to access the Library where the 'WebServer' folder is located when you enable web-sharing. Whenever I try to access it it gives me the error that I am not allowed to see what's inside and I checked my status, saying that I am an admin but it still occurs. Any help?

  Read the article

• How do I add permissions via command line for "everyone" on external HDD

  - by acidzombie24

  I have an external HDD and I kind of messed up the file permissions but when fixing it I thought it is ok bc with my username I can access the files perfectly fine. Now that I use this with two PC (actually ATM I don't have access to my other PC) I can't access these files. The problem is this directory has hundreds of folders with no permission for "everyone". I would like to give it the default permissions including have all access for the user "everyone". How do I do that via command line for these hundreds of folders?

  Read the article

• Trouble creating FTP in Server 2008

  - by Saariko

  I have been trying to create an FTP server on my new Server 2008. I have been following both (very detailed and highly published here guides) For setting up using IIS Manager http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/ and For anonymous FTP http://www.trainsignaltraining.com/windows-server-2008-ftp-iis7 I am able to log as an anonymous user. My need is to use a named user, so I need to use the IIS Manager. I get error 530 when trying to log as a user. Connected to 127.0.0.1. 220 Microsoft FTP Service User (127.0.0.1:(none)): ftpmanager 331 Password required for ftpmanager. Password: 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: Filename: Error: 530 End Login failed. ftp> I can not learn from this message anything. My password is set to: 1234 (so I don't think I make a mistake here - testing purposes only ofc) Thank you. Note - I went over other posts on SE that I read, and couldn't get the result: IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in. FTP Error 530, User cannot log in, home directory inaccessible. Having trouble setting up FTP server on Windows Server 2008 EDIT I think I found some errors with the physical path. Going to Basic settings, and Test Connection on the physical path, gave me the following error: The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again. I am not sure which/whom should get access to the Root folder !? I want to point out, I managed to login with a domain user (change authorization and authentication methods) but this is NOT the requested solution. I checked to make sure that the FTP, folders, access is working properly. I am bit lost here. ==== More tries: I have enabled another Allow rule for ALL Users. I still get the same error. It seems that it doesn't matter if i use a correct or wrong password, I still get Error 530.

  Read the article

• How to autorun wpa_supplicant on Debian startup

  - by The Electric Muffin

  I'd like to run wpa_supplicant -D wext -i wlan0 -c /etc/wpa_supplicant.conf on Debian startup (runlevels 2-5). I found some vague instructions from a related question that said to put a script in /etc/init.d/ and then symlink to it from the apropriate /etc/rcRUNLEVEL.d/ directories. However, I noticed that there are already some files named "wpasupplicant" that probably run at startup: /etc/network/if-down.d/wpasupplicant /etc/network/if-post-down.d/wpasupplicant /etc/network/if-pre-up.d/wpasupplicant /etc/network/if-up.d/wpasupplicant They all are symlinks to the same script, /etc/wpa_supplicant/ifupdown.sh. It has a comment at the beginning saying it "[...] allows ifup(8), and ifdown(8) to manage wpa_supplicant(8) and wpa_cli(8) processes running in daemon mode." However, the closest it gets to calling wpa_supplicant itself is (in functions.sh): WPA_SUP_BIN="/sbin/wpa_supplicant" [snip] start-stop-daemon --start --oknodo $DAEMON_VERBOSITY \ --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \ -- $WPA_SUP_OPTIONS $WPA_SUP_CONF [snip] start-stop-daemon --stop --oknodo $DAEMON_VERBOSITY \ --exec $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE Does that mean it's safe to make an init.d script for wpa_supplicant, and if so what would it look like? General info: Debian Squeeze (5.0) official wpasupplicant package (v0.6.10-2.1) The full contents of my system's functions.sh and ifupdown.sh are here (dependent, of course, on my system's uptime—it's a five-year-old laptop that greatly enjoys overheating): functions.sh ifupdown.sh

  Read the article

• Is there a filesystem firewall?

  - by Jenko

  Ever since firewalls appeared on the scene, it became hard for rogue programs to access the internet. But you and I know that running applications get unrestricted access to the filesystem. They can read your files and send them to poppa. (programs such as web browsers and IM clients, which are allowed thru the internet firewall) Any way to know which programs are accessing your files? or limit their access to a specific partition?

  Read the article

• Port(s) not forwarding?

  - by user11189

  I have cable internet service through Charter Communications and feed two desktop computers through a Linksys RP614v3 router. One system is my wife's running WinXP Home Edition and the other is mine, running Vista Home Premium (sp1). I have port forwarding configured in the Linksys so I can access the Vista system remotely using TightVNC. Initially, it worked great and I was able to remotely tend email and access local files while out of town for work. Lately, the cable internet service appears to flicker intermittently and upon return, my Mailwasher program loses ability to access the net and I've been unable to make the remote connection. When I reset the port forwarded for email in the router control panel, Mailwasher functionality returns but as I'm home when that happens, I have no easy way to check remote access until the next time I'm on the road or at work. I'm at my wit's end -- the TightVNC client accesses fine from my wife's system from behind the modem/router setup but I don't know how to maintain whatever gets reset when I fiddle with the control panel and the need to do so at all is new. I accessed it fine for a week off and on while out of town a month ago and now I can't leave home and access it from work an hour later.

  Read the article

• software question

  - by aravinthanb

  msxml3.0.dll access is denied while creating a xml file using html

  Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >