Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 505/714 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

• New power supply, now computer doesn't recognise hard drive?

  - by Mike

  Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

  Read the article

• Disable writing RAID degraded mode

  - by jolivier

  I have a RAID5 with 5 disks on my machine and suspect the motherboard chipset to fail at some points and make my raid going in degraded mode. Last time it happened I noticed it on the failure of the 2nd drive connected to the same chipset and lost a lot of data. So I would like to prevent this, and especially I would like to have mdadm disable writes on the raid if one of the disk fails. So that in between I get notified, I recover and can use my system again. Sadly I could not find it in man mdadm so I was wondering if this is possible via a tool or hidden option since for me it looks like a standard feature of a RAID system. If this is not possible I would also be happy with a solution to stop the raid if degraded.

  Read the article

• Linux live cd with Broadcom Wi-fi support

  - by paul simmons

  I am looking for a live distro that has out of the box Broadcom wireless support. I am pretty happy with my Ubuntu installation and as long as I have an ethernet connection first time installed, I can install Broadcom drivers over internet. But being a little paranoid, I make my secure operations (banking etc.) with a live cd and zero hard disk access, so nothing is recorded. So far I plug ethernet to do such things with the live cd, but it would be nice if I can do same thing with wireless.

  Read the article

• Moved VM doesnt work correctly on my Ubuntu machine

  - by tinny

  Hi I have a Windows 7 VM that I have moved onto my Ubuntu 64bit host machine that is running VMware player 3.1.0. I think the VM was created on a Windows host. The problem I have is that when I login to this VM the screen goes blank and stays that way. The login screen is fine, but the desktop never correctly appears and sort of shows some strange pixelation that is all distorted. Seems like a virtual video card issue? If I boot into safe mode the desktop appears fine. Any ideas? Thanks

  Read the article

• Software RAID underneath ESXi datastore

  - by carlpett

  I'm building an virtual environment for a small business. It is based around a single ESXi 5.1 host, which will host half a dozen or so VMs. I'm having some doubts regarding how to implement the storage though. I naturally want the datastore to be fault tolerant, but I can't get the funds for a separate storage machine, nor expensive hardware RAID solutions, so I would like to use some software RAID (lvm/mdadm, most likely). How can this be implemented? My only idea so far would be to create a VM which has the storage adapter as passthrough, puts some software RAID on top of the disks and then presents the resulting volumes "back" to the ESXi host which then creates a datastore from which other VMs get their storage presented. This does seem kind of round-about, do I have any better options? From my research, passthrough seems to come with quite a few drawbacks, such as no suspend/resume etc.

  Read the article

• Type 1 Hypervisor on the desktop

  - by Blazemore

  I have a powerful home PC, and I've used VirtualBox to run Linux distros in Windows (and vice versa). I'm interested in trying out a lightweight type 1 hypervisor to run all my operating systems (Windows 7, Debian, Arch) and was looking for suggestions of which to pick and how to implement this. From what I gather, a type 1 hypervisor is a lightweight OS which simply provides VM management functionality. Will I get reasonable performance under each guest OS? Can all the guest OSs have access to a shared data drive, or is is best to have a storage server in another guest OS and mount it over the virtual network? What about gaming, is this feasible, or will I realistically need to run Win7 on bare metal? I'd appreciate any input.

  Read the article

• Copy an Amazon EC2 Instance to use locally

  - by Excolo

  Ok, so we have a spare server I have installed Debian Wheezy on, and setup Xen on for virtual machines. It has better performance than all our ec2 instances combined, and will cost less to run (for a few various reasons) I would like to get the EC2 instances downloaded to my server, and converted to run for Xen, but im having difficulty finding anything specific. I did not setup the EC2 instances myself, and am not very familiar with them. Everything I have found (which isnt much) just says "Do XYZ" and I have no idea how to do those. So being as specific as possible would be helpful. Also, confusingly I see people writing in forums saying you can only export linux images (which mine are, Ubuntu images) but then I see on amazons export tool saying you can only export Windows server? Am I missing something here? Is that not the right place to be looking? Thanks

  Read the article

• How to make all of my IPs works in HyperVM XEN?

  - by user758667

  I've installed HyperVM on CentOS 5.8 final to make XEN VPS. I have 5 IPs, and added them to an IPPool. They are from *.123 to *.126. But when I add Virtual machines, just the first one (which indicate to *.123 ip) works well. I mean I can ssh to it by "works well" and when I want ssh to the other ones ( *.124 *.125 ...) it says : ssh: connect to host *.124 port 22: Connection timed out after a while. I alos set gateway and netmask as it shows in my server IPAdresses for device eth0 (it doesn't make any difference if I set these or not, I get same error). What should I do now? Thanks.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• cant recognize the path of hard drive which is not a part of an array

  - by Abhishek

  hi there, I have a problem on my server as below.. On my server i configured a raid array of 3 hard disks, in my c drive their is a web applications running on Apache Tomcat server. Now because of shortage of storage i entered a new hard disk to the server which is not a part of that raid array. Now through my web application i upload some images to new hard drive and file uploaded successfully but when through that same application, i try to retrieve those images and show on a web site i does not recognize that and dose not give any error. i try to access that drive with absolute path but it not works. Can any one help me to find the solution of this problem? Thank You in advance.

  Read the article

• Any recommendations on a NAS for a home-super-user?

  - by marc_s

  Can anyone recommend a good NAS for use in a home-server environment? I would request at least 2, preferably 4 disks, and I am most interested in good to excellent throughput for file-server and backup purposes - don't need any of the fancy media-streaming or -sharing features, that's not of interest to me. For a 4 or more disk solution, support for the various RAID levels (0, 1, 1+0, 5) would be a plus - especially if supported in hardware (rather than just a software emulation). I just need a place to put my collection of data, ISO images, and so forth - and since several external disks (self-built and off-the-shelf) have failed so far, I'm looking into a more reliable solution. Marc

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

  - by strangeman

  I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

  Read the article

• debian installation without internet connection

  - by Gobliins

  Hi i want to install some Debian distributions (Grip, Crush, Lenny...) for arm / armel architectures. www.emdebian.org/ i refer to this guide www.aurel32.net/info/debian_arm_qemu.php The Problem i have is that i dont have internet connection with My Linux VM or Qemu i am behind a Proxy. I want to know is there a way where i can dl all the needed files and save them to disk that i don´t need an i.c. during the installation? I am working under Windows now. my regards

  Read the article

• Suhosin per-URL exceptions?

  - by STATUS_ACCESS_DENIED

  I am using SimpleID as my OpenID provider and it turns out that if I log on via pages like those on StackExchange, one of the parameters of the GET request gets dropped by Suhosin. The name of the variable is s and I presume it's responsible for the "return to URL" part after login. All of this is not a problem as long as I am already logged into SimpleID from before. However, as soon as the site on which I want to log in via OpenID ends up at the login screen of SimpleID, the redirect back to the site I came from does not work anymore due to the dropped variable. Is there a method to configure either on a per-virtual-host or per-URL basis to ignore the maximum length for GET requests with a parameter s exceeding the (globally) set limit? I'm using Apache 2.2, so I was wondering whether a mechanism similar to setting the PHP ini variables from within the server configuration exists for Suhosin.

  Read the article

• Sharing files between centOS on virtualbox and windows 7 as the host

  - by Wasswa Samuel

  I have centOS 5.5 installed on virtual box it has no GUI so every thing is command based. I want to make a folder in centOS which i can share with my windows 7 host OS such that i can send files to and fro seamlessly. I am new to linux and i managed to install samba. I looked up some tips on net but i ended up getting confused and none of them worked. Can someone explain to me how i can do this in a straight forward way from how i can configure samba to how i can mount the folder such that it can be seen on the host operating system. I am completely lost.please help.

  Read the article

• Cant get sub-domain created by Plesk working

  - by RN.

  Apache 2.2 CentOS Plesk 9.x I am using Plesk to manage my domain names on my virtual host.and GoDaddy for DNS I have created a new sub-domain blog using Plesk. I can see the httpd.include for example.com has a new virtualhost entry - blog.example.com I can also see folders have been created for the subdomain blog vhost\example.com folder But when I try to go to blog.example.com in the browser- I get an error - basically the host is not getting resolved. My site - example.com is working fine otherwise Any idea what could I be missing ? I did try restarting the apache web server as well

  Read the article

• I have a 21TB array but only 16TB is visible from Windows

  - by Relentim

  CONTROLLER Raid Controller: 3Ware 9650SE-24M8 Disks: 21 x 1TB RAID5 Stripe 64KB WINDOWS OS: Windows Server 2003 SP2 32x Disk: Dynamic 19557.44GB Volume: Capacity 15832.19GB I guess my array must have a 4KB block size which is limiting it to 16TB. I think I would have to switch to a 64KB block size to be able to see a maximum of 256TB. Or create another unit on my controller to go above 16TB of storage. Unfortunately I have already added over 16TB, ideally I would like to shrink the array and reclaim the 5 disks that aren't doing anything. I don't think this is possible. More likely, can I change the block size so 20TB becomes visible in windows?

  Read the article

• Can GnomeKeyring store passwords unencrypted?

  - by antimeme

  I have a Fedora 15 laptop with the root and home partitions encrypted using LUKS. When it boots I have to enter a pass phrase to unlock the master key, so I have it configured to automatically log me in to my account. However, GnomeKeyring remains locked, so I have to enter another pass phrase for that. This is unpleasant and completely pointless since the entire disk is encrypted. I've not been able to find a way to configure GnomeKeyring to store its pass phrases without encryption. For example, I was not able to find an answer here: http://library.gnome.org/users/seahorse-plugins/stable/index.html.en Is there a solution? If not, is there a mailing list where it would be appropriate to plead my case?

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• How do I disable Windows Search Indexing Service while on battery on Windows 7?

  - by Slaggg

  Since upgrading from Windows XP to Windows 7, I've found laptop battery life is reduced. One issue is that the Windows Search Indexing Service is constantly running, even when on battery power. Using Resource Monitor shows it is often the top consumer of CPU time and top producer of disk activity. I imagine this is one of the primary reasons the battery is getting drained faster. I cannot find any options to tell Windows Search Indexing Service to not index while on battery power. The only solution seems to be to stop the service, and also disable the service (if you just stop it, it will restart itself after a while). Doing this gives me considerably more battery life, but it's a pain because I have to re-enable the service when plugged in again. Is there a better solution?

  Read the article

• How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

  - by deryus

  A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

  Read the article

• What are the major distinctions between PureDarwin and FreeBSD?

  - by ??????? ???????????

  I'm looking to install a different unix on my workstation to acquire some perspective on GNU/Linux and out of curiosity. I have narrowed my options down to these two. The reason for considering PureDarwin is because I have very little experience with Apple's products. So my question is will installing and using PureDarwin give me a closer understanding of OSX than would running FreeBSD? What I have in mind are day to day routines like adding users, installing software and configuring various aspects of the underlying OS. I know that the GUI of OSX would not be available, but that is not a concern. As a secondary, less important question, can I buy OS X in the apple store and run it in a virtual machine or does that violate their EULA?

  Read the article

• Is it necessary to change the default users and groups in VMware esxi 4.0 in order to have a secure

  - by Teevus

  By default esxi creates a number of users and groups including: daemon nfsnobody root nobody vimuser dcui How secure is this default security setup? Besides changing the root password, is it advisable to modify the default users and groups? E.g. does esxi use default passwords for the accounts or anything else that could be exploited by malicious users? My scenario is very basic and I don't require any custom users or groups as only sysadmins will ever need to administer the virtual infrastructure, and they can do so using the root account. Thanks

  Read the article

• Sound feels to come from far in my headphones [closed]

  - by Rakesh

  I bought new headphones just yesterday. The strange thing is when I hear sound from my headphone I feel like it is coming from far away. Main problem comes in games, when I hear the footsteps of enemies and think he is on the other side of the wall while he is near to me. :D I also heard virtual haircut on youtube . I tried this with my new headphones and HTC desire S earphones. In case of HTC earphones I felt that scissors and electric razor( @ 3:04 ) is too much near to my ear but in case of the headphones I didn't felt such thing. I felt electric razor is almost 6 inches away from my ear. Have you ever encountered such problem? What can I do in this case?

  Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >