Search Results

Search found 24117 results on 965 pages for 'write through'.

Page 505/965 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

• Private Git repo using Smart HTTP with LDAP authentification

  - by ALOToverflow

  I've been crawling the interwebz and getting my hands dirty for the last few days, but I can't seem to make it all work together. I managed to get a HTTP repo working with Ubuntu 10.04 over Smart HTTP (pull and push over HTTP) for a single repo. This means that I do the initial setup over SSH to the server (git init --bare) and after that the clients can pull and push to it (git clone http://servername/allgitrepos/repo.git). Unfortunately it's impossible to add a new repo without SSHing to the server and adding it manually) i.e. git push http://servername/allgitrepos/repo2.git (allgitrepos is available for everyone to read-write and execute) would fail talking about git update-server-info (which seems to be a general error message). So far the repository is anonymous, so I would like to authenticate using LDAP and also use the LDAP creds to make the git commit. So, how can I push new repos to the server and how can I use the LDAP creds to make the git commit. Thanks

  Read the article

• Locale variables have no effect in remote shell (perl: warning: Setting locale failed.)

  - by Janning

  I have a fresh ubuntu 12.04 installation. When i connect to my remote server i got errors like this: ~$ ssh example.com sudo aptitude upgrade ... Traceback (most recent call last): File "/usr/bin/apt-listchanges", line 33, in <module> from ALChacks import * File "/usr/share/apt-listchanges/ALChacks.py", line 32, in <module> sys.stderr.write(_("Can't set locale; make sure $LC_* and $LANG are correct!\n")) NameError: name '_' is not defined perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "de_DE.UTF-8", LC_MONETARY = "de_DE.UTF-8", LC_ADDRESS = "de_DE.UTF-8", LC_TELEPHONE = "de_DE.UTF-8", LC_NAME = "de_DE.UTF-8", LC_MEASUREMENT = "de_DE.UTF-8", LC_IDENTIFICATION = "de_DE.UTF-8", LC_NUMERIC = "de_DE.UTF-8", LC_PAPER = "de_DE.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_ALL to default locale: No such file or directory No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. ... I don't have this problem when i connect from an older ubuntu installation. This is output from my ubuntu 12.04 installation, LANG and LANGUAGE are set $ locale LANG=de_DE.UTF-8 LANGUAGE=de_DE:en_GB:en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC=de_DE.UTF-8 LC_TIME=de_DE.UTF-8 LC_COLLATE="de_DE.UTF-8" LC_MONETARY=de_DE.UTF-8 LC_MESSAGES="de_DE.UTF-8" LC_PAPER=de_DE.UTF-8 LC_NAME=de_DE.UTF-8 LC_ADDRESS=de_DE.UTF-8 LC_TELEPHONE=de_DE.UTF-8 LC_MEASUREMENT=de_DE.UTF-8 LC_IDENTIFICATION=de_DE.UTF-8 LC_ALL= Does anybody know what has changed in ubuntu to get this error message on remote servers?

  Read the article

• My windows keyboard is being "clever" with the quote keys - how can I stop it?

  - by Marcin

  I'm using windows 7 on a laptop. On the laptop keyboard, for some reason, the quote key (which has both double and single quote on it) is doing some "clever" annoying things: When I press single-quote (or double-quote), windows doesn't send any characters until I press it twice (resulting in '' or "") When I press it before a vowel, I get some kind of accented character. As I usually only write English, this is annoying. The backtick/tilde key is subject to similar behaviour. I have not attempted to set up my computer to process anything other than English. My keyboard appears to be (in so far as these things are standard on laptops) a standard US qwerty keyboard. How can I stop this happening?

  Read the article

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• How are objects modelled in a functional programming language?

  - by Giorgio

  In an answer to this question (written by Pete) there are some considerations about OOP versus FP. In particular, it is suggested that FP languages are not very suitable for modelling (persistent) objects that have an identity and a mutable state. I was wondering if this is true or, in other words, how one would model objects in a functional programming language. From my basic knowledge of Haskell I thought that one could use monads in some way, but I really do not know enough on this topic to come up with a clear answer. So, how are entities with an identity and a mutable persistent state normally modelled in a functional language? EDIT Here are some further details to clarify what I have in mind. Take a typical Java application in which I can (1) read a record from a database table into a Java object, (2) modify the object in different ways, (3) save the modified object to the database. How would this be implemented e.g. in Haskell? I would initially read the record into a record value (defined by a data definition), perform different transformations by applying functions to this initial value (each intermediate value is a new, modified copy of the original record) and then write the final record value to the database. Is this all there is to it? How can I ensure that at each moment in time only one copy of the record is valid / accessible? One does not want to have different immutable values representing different snapshots of the same object to be accessible at the same time.

  Read the article

• Capturing BizTalk 2004 SQLAdapter failures

  - by DanBedassa

  I was recently working on a BizTalk 2004 project where I encountered an issue with capturing exceptions (inside my orchestration) occurring from an external source. Like database server down, non-existing stored procedure, …   I thought I might write-up this in case it might help someone …   To reproduce an issue, I just rename the database to something different.   The orchestration was failing at the point where I make a SQL request via a Response-Request Port. The exception handlers were bypassed but I can see a warning in the event log saying: "The adapter failed to transmit message going to send port "   After scratching my head for a while (as a newbie to BTS 2004) to find a way to catch the exceptions from the SQLAdapter in an orchestration, here is the solution I had.   ·         Put the Send and Receive shapes inside a Scope shape ·         Set the Scope’s transaction type to “Long Running” ·         Add a Catch block expecting type “System.Exception” ·         Set the “Delivery Notification” of the associated Port to “Transmitted” ·         Change the “Retry Count” of the associated port to 0 (This will make sure BizTalk will raise the exception, instead of a warning, and you can capture that) ·         Now capture and do whatever with the exception inside the Catch block

  Read the article

• sharing life experience

  - by gcc

  I am a student of computer engineering. I have never done any programming before, and as you can understand, I don't know how to study it or how to make my own programs. My English is weak [edited for clarity - ed], and so if you don't like the choices I list, please feel free to provide others. How should I study? How should I learn programming languages? Study completely from a book. Don't study from a book, just try writing code. A mix of the two; study from a book, then try writing code. Study half the book, then write the code by hand on paper. Listed to the teacher, then try to solve general problems (those not from any specific chapter). I have send that question to stackoverflow before when I am at first year. Now, I want to construct webpage to guide fresh students by giving advise of yours and mines.Maybe, you wonder Why I want to construct webpage , I just want help the other student. I am giving a link to that question < http://stackoverflow.com/questions/3389465/how-should-i-study-programming-languagess If you have other advice, feel free. EDIT: This web cite, I think , is constructed to share member's life experience and also I know these experiences is valuable . So I have no right to want your opinion, But I want your opinion / experience even if you think it is not so helpful to other

  Read the article

• Apache Custom Log Format

  - by Shishant

  Hello, I am trying to write a reward system wherein users will be given reward points if they download complete files, So what should be my log format. After searching alot this is what I understand its my first time and havent done custom logs before. First of all which file should I edit for custom logs because this thing I cant find. I am using ubuntu server with default apache, php5 and mysql installation # I use this commands and they work fine nano /etc/apache2/apache2.conf /etc/init.d/apache2 restart I think this is what I need to do for my purpose LogLevel notice LogFormat "%f %u %x %o" rewards CustomLog /var/www/logs/rewards_log rewards This is as it is command or there is something missing? and is there any particular location where I need to add this? and one more thing %o is for filesize that was sent and is it possible to log only files from a particular directory? or for files with size more than 10mb. Thank You.

  Read the article

• sudoers - simple explanation requested

  - by Redsandro

  Everytime I want to be able to run something that requires me to be a sudoer too many times, I need to google for the formatting of /etc/sudoers to remind me again what exactly is the proper way to write it. Now I see different writing styles in my sudoers file, which is the consequence of different google results over the months. I've also noticed that the second example (below) seems to work in XFCE, but not in Cinnamon (Gnome 3). This could be totally unrelated, but nontheless I'd like to know once and for all, what is the correct grammar of the sudoer line, and what is the difference between the given examples? redsandro ALL=NOPASSWD:/path/to/command redsandro ALL=(ALL) NOPASSWD:/path/to/command redsandro ALL=(ALL:ALL) NOPASSWD:/path/to/command Also, what are all the ALL's for? One user, one command, yet I need to use the ALL keyword up to three times? Am I doing this wrong? Of course, omitting NOPASSWD: makes you enter your password before you are permitted to run the command, but one point of confusion is the usage of = and :, for the final command that is the subject of the line can be prepended by either =, :, , or ), confusing grammar for similar semantics.

  Read the article

• Intuitive view of what's using the hard drive so much on Windows 7?

  - by Aren Cambre

  Sometimes my hard drive usage is near 100%, and I have no idea what is causing it. Are there any utilities that can help diagnose excessive hard drive usage and have as intuitive of an interface as Task Manager's Processes tab, which I can sort by CPU usage? I am aware of using procmon, of adding columns to Task Manager's Processes tab like I/O Read Bytes and I/O Write Bytes, and using Resource Monitor's Disk tab. Too often, these don't give me useful information or clearly identify a single process that is hogging the disk.

  Read the article

• Assigning a script to a keystroke to toggle touchpad

  - by sodiumnitrate

  Since my default sony vaio shortcuts don't completely work in Ubuntu 12.04, I'd like to assign a script to Fn + F1, which toggles the touchpad on and off, so that the cursor would stop moving while I'm typing. Since I use a mouse and rarely need to use the touchpad, I don't want to use "disable touchpad while writing", which doesn't really seem to work anyway. I figured that using a script with the following command (this works, but I have to open up a terminal each time): xinput set-prop 12 "Device Enabled" 0 I have two problems at this point. One is that I don't know how to write this script so that it will toggle it off if it is on, and on if it is off. I know I should use an if statement but I don't know what value I should be checking to see if it is on or off. The second one is that I am having problems creating a new shortcut. I use System Settings - Keyboard - Shortcuts. I tried to add, to custom shortcuts, a new one by clicking the '+' sign. I named it Toggle Touchpad, and added the path to the executable script with the line above, by typing /home/irem/.toggletouchpad I have made it an executable with chmod. The problem is that when I click apply, and then click back on it to define the keystroke, it re-opens the dialogue. I cannot define new keys. (It says disabled on the right column of the entry). I have also tried xbindkeys, which almost constantly crashes. I'd prefer the system settings, if I can set the shortcut. I'd appreciate if anyone can help. Thanks.

  Read the article

• file copy error from system to cifs mount

  - by dwpriest

  When coping a file greater than 64kB from an Ubuntu server to a CIFS mounted windows share, most of the data is copied, but it seems the last chunk doesn't get copied. The size doesn't match, and the md5 check sums don't match. I have plenty of file space, but then I use cp, I get the following... cp: closing `cloudBackup/asdf.txt': No space left on device Using rsync, I get the following... rsync: close failed on "/home/fluffy/cloudBackup/.asdf.txt.qrBWe6": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(752) [receiver=3.0.8] rsync: connection unexpectedly closed (29 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8] I have full read/write permissions on the mounted share. I can copy via SSH just fine. Any ideas? Thank you

  Read the article

• Mount a network drive when windows starts up without being logged in.

  - by GLB03

  Current Scenario: I have a NAS Box, and a Windows 2003 Server that our recording software is on (Security Cameras). The software stores the data on the NAS box. Currently someone has to be logged in with valid credentials in order to keep the drive mounted (e.g. domain admin). I know you can mount the drive with a batch file, but this stores credentials in clear text and is not a good solution. I am looking for another way to get the drive to mount on startup without someone having to be logged in. I do have a generic account setup that has access to read/write to the drive but can't log-in interactively, this is the account I would like to use to mount it if any. Any suggestions?

  Read the article

• Should CV contain cases where certain party fools me and not pay salary? Is it "holiday" time or not?

  - by otto

  Suppose I am fooled to work in a start-up or a company that has been a very small over a long time, let say 10 years. I work them 3 months and I really enjoy the work -- I learn a lot of new skills such as Haskell, MapReduce, CouchDB and many other little things. Now the firm did not pay any salary: A) I may be unskilled, B) I did not meet some deadline (I don't know because I am not allowed to speak to the boss but I know that I am not getting any payment) or C) I was fooled. Some detail about C I heard that the firm have had similar cases from my friend, "The guy X was there and he said he does not trust the firm at all so he went to other firm". I don't know what the term "trust" mean here, anyway the firm consists of ignorant drop-outs that hires academic people, a bit irony. They hire people from student-organizations and let them work and promise ok -compensation but -- when you start working the co-employer starts all kind of instructions "Do not work so hard, do not work so long, do not work so much" -- it is like he is making sure you do not feel sad when he does not pay any salary (co-employer is an owner in the firm). Anyway, I learnt a ton in the company but it was very inefficient working. I worked only alone, not really working in a "company". Now should by resume contain references to the firm and the guy who did not pay me anything? Or should my resume read that I worked in XYZ -technologies -- but 1 year's NDA -- what can write here? Now I fear that if I put the firm to my resume: they will lie about my input to my next employer. I feel they are very dishonest. On the other hand, I want to make it sure that I have worked over the time. So: Should my CV contain the not-so-good or even awful employers that may be fooling people to work there? I am pretty sure everyone knows the firm and its habbits, circles are small but people are afraid to speak.

  Read the article

• Create network shares via command line with specific permissions

  - by Derek

  This is sort of a two-pronged question. I am developing an application that will need to be able to create network shares in Windows Server 2003 via the command line. So, firstly, how do I create shares in Windows via the command line? I tried researching it, and all I was able to find is that I should be using net, but other than that, there isn't much documentation. Also, in this share there will be a few directories with the names of users on the domain, and I would like for the directories to not be readable or writable by anyone else. For example, say I have two directories: jsmith and jdoe. I would like the user jsmith to write and read from the directory jsmith, but not the directory called jdoe, and vice versa.

  Read the article

• International Pricing of Software [closed]

  - by arachnode.net

  I operate a small company that charges $99 for a piece of software. I'd like to know what would be a fair price for non-US customers. Today I sold a license to a party in South Africa. He told me he had been watching the project for two years while business justification could be made for the purchase as SA's currency is nine times weaker than the US dollar. I found this resource detailing how much a Big Mac costs in various countries: http://howmuchatyourplace.com/how_much_does/Big%20Mac_cost.php I realize that the cost of producing a Big Mac varies from locale to locale as does the demand for one. I am aware that many software companies charge prices in local currencies that equate to the price in US dollars. I am aware that my costs remain fixed, and I obviously I cannot discount the rate at which my time costs me. I'm OK with earning less per sale as I would rather get my software onto the desktops of those that need it rather than having them try to write it themselves. Support is light and I can usually point a user to an existing blog or forum post. Being a resident of Hawaii, I am aware that certain goods and services cost more here. Power is up to six times as much per KWH as it is in, say, Seattle, and wages are approximately 60% of what they are for my profession (programmer). I'd like to offer my software at a price that would be fair for everyone around the globe. If a currency is 2 foreign units to 1 US dollar, and goods and services cost 50% more and pay for an equivalent job is 50% of what it is here, should I charge, say, $50 instead of $99? Is there a resource which would allow me to input a price in US dollars and adjust for a list of international locations?

  Read the article

• Is there a software that can remap the keys for a speficic keyboard?

  - by Vilx-

  There are several keyboards attached to my computer. I'd like to remap the keys on ONE of them, but keep the rest as they were. Is there a software that does this? As for the "why" - I have this idea that I'd like to have a "multimedia keypad" which is separate from my main keyboard, but I could not find any online. So I think that I could take a typical USB numpad (they cost like 5$), and remap the keys on one of them. Add appropriate stickers, and I'm all seat, cheaply. I know that it's theoretically possible, but before I get my hands dirty and write my own software, I'd like to see if there's maybe an existing one out there. Oh, yes, I'm running Windows 7.

  Read the article

• Microsoft WPC 12&ndash;Predictions

  - by D'Arcy Lussier

  Let me start by saying I have absolutely no inside knowledge, neither through the MVP program or any other means, that is fuelling what I’m about to write. This is entirely conjecture fuelled by speculation and too much Soporro beer at a fantastic Japanese restaurant tonight. Still, I present to you… D’Arcy’s Worldwide Partner Conference 2012 Predictions!!! So what can we expect to be announced at this year’s WPC? Much more than last year I’m hoping! Last year was sort of encouraging the troops to carry on with the Windows 7 messaging even with Windows 8 looming in the distance. It also showed Microsoft’s slant towards Private Cloud in addition to Azure. This year, we’re going to see a shift to a battle cry – Windows 8 is Coming, Windows 8 is Coming! I expect we’re going to hear an RTM date for Windows 8 from Steve Ballmer tomorrow, in addition to dates surrounding Windows Server 2012. We’ll also hear some announcement around Windows Phone 8, but I’m not really sure what – that whole piece is still quite muddy; are we going to actually *see* Windows Phone 8 devices this week? That would be great, but I imagine those types of announcements might be left for Build. Speaking of Build, I’m expecting an announcement on a date for a Build conference this Fall, probably late October. If any announcements are going to be made around Office 15, the schedule isn’t hinting at it. In fact, other than Office 365 there’s not much mention of Office in the conference sessions – either a red herring, or telling that Microsoft has another announcement coming later. The tagline of the conference is “A New Era. Together.” It’s obvious Microsoft is wanting to leverage WPC to rally their partners to carry the Windows 8 banner into the field of battle this fall when it ships. D

  Read the article

• Crash due to removal of Elements like CCSprite from NSMutableArray

  - by mayuur

  So, here's how it goes. I am currently working on Cocos2d game, which consists of many Obstacles. One obstacle gets added on the screen at an interval of 10 seconds like this. ObstacleSprite* newObstacle = [ObstacleSprite spriteWithFile:@"Obstacle.png" rect:CGRectMake(0, 0, 20, 20)]; newObstacle.position = ccp(mainPlayer1.position.x,10); [self addChild:newObstacle]; [self.arrayForObstacles addObject:newObstacle]; Now, I insert these obstacles into the arrayForObstacles because I also want to keep checking whether the Obstacles and MainPlayer don't collide. I check it with the help of this function. - (void) checkCollisionWithObstacle { if(mainPlayer1.playerActive) { for(int i = 0; i < [self.arrayForObstacles count]; i++) { ObstacleSprite* newObstacle = [self.arrayForObstacles objectAtIndex:i]; if(newObstacle != nil) { if(CGRectIntersectsRect([mainPlayer1 boundingBox], [newObstacle boundingBox])) { mainPlayer1.livesLeft--; } } } } } THE ISSUE Problem is when I get to certain score, one of the Obstacles gets deleted. Removal of Obstacles works as in First In-First Out (FIFO) mode. So, to delete obstacles, I write the following method : - (void) keepUpdatingScore { //update new score mainPlayer1.score+=10; //remove obstacle when score increases by 5k if(mainPlayer1.score > 5000 && mainPlayer1.score > 0) { mainPlayer1.playerActive = NO; if([self.arrayForObstacles count] > 0) { CCLOG(@"count is %d",[self.arrayForObstacles count]); ObstacleSprite* newObstacle = [self.arrayForObstacles objectAtIndex:0]; [self.arrayForObstacles removeObjectAtIndex:0]; [self removeChild:newObstacle cleanup:YES]; CCLOG(@"count is %d",[self.arrayForObstacles count]); } } else { } } It crashes when score crosses 5000 mark! UPDATE Crash happens when it again goes to the method checkCollisionWithObstacle. This is the THREAD Look. THis is the line Which crashes.

  Read the article

• Automated Qt testing framework

  - by user1457565

  Can someone recommend a good robust "Free" testing framework for Qt? Our requirements: Should be able to test basic mouse click / mouse move events SHould be able to handle non-widget view components Should have "record" capability to generate test scripts. Should be automatable for running it daily. We looked at: Squish - this solves all our problems. But it is just too da** expensive. KD Executor - the download page now links to the squish page and says thats what they recommend for testing. Not sure what they mean by that. TDriver - from nokia.qt. Super difficult to install. Very little documentation. Having a hard time to just install. I wonder how much harder it would be to write tests. qtestlib - Could not handle non-widget components. Everything has to be a widget to be tested. No "record" feature. Can someone help with any other alternative ? thanks Mouli

  Read the article

• What is the difference between the "Entire Partition" and "Entire Disc"?

  - by Roman

  I want to install Ubuntu alongside my Windows 7 operation system. During installation I have three options: Install alongside the existing OS. Remove everything and install Ubuntu. Manual partitioning (advanced). The above list is not precise (I do not remember what exactly was written there and I just write options as I have understood them). I know that option 2 is not mine. So, I need to choose either 1 or 3. I do not know which one I need to choose. I want to have a possibility to manually specify space assigned to Windows and Ubuntu (for example 40% for Windows and 60% for Ubuntu). I chose the 1st option and I saw a window with the following information. Allocate drive space by dragging the drive bellow. File (48.1 GB) Ubuntu /dev/sda2 (ntfs) /dev/sda3 (ext4) 286.6 GB 241.7 GB 2 small partitions are hidden, use the advanced partitioning tool for more control. [use entire partition] [use entire disk] [Quit] [Back] [Install Now] My problem is that I do not understand what I see. In particular I can press [use entire partition] or [use entire disk] and I do not know what is the difference. Moreover, as far as I understand, I can even press [Install Now] without pressing one of the two above mentioned buttons. So, I have 3 options. What is the difference between them? The most important thing for me is not to delete the old operation system with all the data stored there.

  Read the article

• Find and raise a window in KDE4 with shortcut

  - by Andre_112

  Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

  Read the article

• Is writing recursive functions hard for you?

  - by null

  I'm taking a computer science course now. I feel it is so hard compared to my polytechnic IT course. I can't understand recursive methods well. How do you manage to get your brain to understand it? When the recursive method returns back, my brain can not trace it nicely. Is there a better way to understand recursion? How do you start learning it? Is it normal that feel that it is very hard at then beginning? Look at the example, I'm very surprised how can I write this if it appears in exam. public class Permute { public static void main(String[] args) { new Permute().printPerms(3); } boolean[] used; int max; public void printPerms(int size) { used = new boolean[size]; max = size; for (int i = 0; i < size; i++) { used[i] = false; } perms(size, ""); } public void perms(int remaining, String res) { if (remaining == 0) { System.out.println(res); } else { for (int i = 0; i < max; i++) { if (!(used[i])) { used[i] = true; perms(remaining - 1, res + " " + i); used[i] = false; } } } } }

  Read the article

• Account not getting completed deleted within linux

  - by lbanz

  I've got a nas box running some flavour of linux 2.6.31.8.nv+v2 with an arm processor. It has got a samba share called 'all' that has full read write access to everyone. However one Windows machine cannot access it without prompting for authentication and I found out from the logs that the windows account matches a local account on the nas box. What I then went to do is delete the local account on the nas. I can see that /home,/etc/password + /etc/shadow the account doesn't exist anymore. However the samba logs, shows that it thinks it is still there as it says account is disabled. I've tried rebooting both nas + windows box. Is there somewhere else that it stores account information? I logged on with a different account on that Windows machine and I can access the share fine. The smb logs shows that it can't find the user and then allows anonymous access.

  Read the article

• SteamCMD can't add files to my home directory

  - by Angle O'Saxon

  I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

  Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >