Search Results

Search found 26176 results on 1048 pages for 'stream socket client'.

Page 506/1048 | < Previous Page | 502 503 504 505 506 507 508 509 510 511 512 513  | Next Page >

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• Loopback connection via PHP's getimage size crashes server (Magento's CMS)

  - by Alex

  We were able to trace down a problem that is crashing our NGINX server running Magento until the following point: Background info: Magento Backend has a CMS function with a WYSIWYG editor. This editor loads some pictures via a controller in magento (cms/directive). When we set the NGINX error_log level to info, we get the following lines (line break inserted for better readability): 2012/10/22 18:05:40 [info] 14105#0: *1 client closed prematurely connection, so upstream connection is closed too while sending request to upstream, client: XXXXXXXXX, server: test.local, request: "GET index.php/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL,,/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9024", host: "test.local" When checking the code in the debugger, the following call does never return (in ´Varien_Image_Adapter_Abstract::getMimeType()` # $this->_fileName is http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif` # $_SERVER['REQUEST_URI'] = http://test.local/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL list($this->_imageSrcWidth, $this->_imageSrcHeight, $this->_fileType, ) = getimagesize($this->_fileName); The filename requests is an URL to the same server which is requesting the script a link to a static .gif that is not existing. Sample URL: http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif When the above line executed, any subsequent request to the NGNIX server does not respond any more. After waiting for around 10 minutes, the NGINX server starts answering requests again. I tried to reproduce the error with a simple test script that only calls getimagesize() with the given URL - but this not crash. It simple leads to an exception saying that the URL could not be loaded (which is fine as the URL is wrong)

  Read the article

• Numlock on when computer is off

  - by George Duckett

  I have a desktop PC which was recently moved. Since moving I've noticed that even while the PC is turned off (but wall socket turned on) the NumLock LED on the keyboard is on. It may have been doing this before the move, but I've only noticed it now. Maybe it matters that the keyboard is connected via a shared mouse/keyboard PS/2 port and I'm running Windows 7. I've not checked whether the LEDs are just keeping whatever state they were in when I turned the PC off but will do this if that information could be relevant. Why does the led stay on when the PC is turned off and how can I prevent this?

  Read the article

• How to email photo from Ubuntu F-Spot application via Gmail?

  - by Norman Ramsey

  My father runs Ubuntu and wants to be able to use the Gnome photo manager, F-Spot, to email photos. However, he must use Gmail as his client because (a) it's the only client he knows how to use and (b) his ISP refuses to reveal his SMTP password. I've got as far as setting up Firefox to use GMail to handle mailto: links and I've also configured firefox as the system default mailer using gnome-default-applications-properties. F-Spot presents a mailto: URL with an attach=file:///tmp/mumble.jpg header. So here's the problem: the attachment never shows up. I can't tell if Firefox is dropping the attachment header, if GMail doesn't support the header, or what. I've learned that: There's no official header in the mailto: URL RFC that explains how to add an attachment. I can't find documentation on how Firefox handles mailto: URLs that would explain to me how to communicate to Firefox that I want an attachment. I can't find any documentation for GMail's URL API that would enable me to tell GMail directly to start composing a message with a given file as an attachement. I'm perfectly capable of writing a shell script to interpolate around F-Spot to massage the URL that F-Spot presents into something that will coax Firefox into doing the right thing. But I can't figure out how to persuade Firefox to start composing a GMail message with a local file attached. Any help would be greatly appreciated.

  Read the article

• Domain Controller DNS Best Practice/Practical Considerations for Domain Controllers in Child Domains

  - by joeqwerty

  I'm setting up several child domains in an existing Active Directory forest and I'm looking for some conventional wisdom/best practice guidance for configuring both DNS client settings on the child domain controllers and for the DNS zone replication scope. Assuming a single domain controller in each domain and assuming that each DC is also the DNS server for the domain (for simplicity's sake) should the child domain controller point to itself for DNS only or should it point to some combination (primary VS. secondary) of itself and the DNS server in the parent or root domain? If a parentchildgrandchild domain hierarchy exists (with a contiguous DNS namespace) how should DNS be configured on the grandchild DC? Regarding the DNS zone replication scope, if storing each domain's DNS zone on all DNS servers in the domain then I'm assuming a DNS delegation from the parent to the child needs to exist and that a forwarder from the child to the parent needs to exist. With a parentchildgrandchild domain hierarchy then does each child forward to the direct parent for the direct parent's zone or to the root zone? Does the delegation occur at the direct parent zone or from the root zone? If storing all DNS zones on all DNS servers in the forest does it make the above questions regarding the replication scope moot? Does the replication scope have some bearing on the DNS client settings on each DC?

  Read the article

• Changing startup parameters for MySQL

  - by RN

  I need to remove skip-networking from MySQL startup parameters I am running MySQL on Linux on Centos on a VPS Can someone please tell a newbie how to do this ? I suppose to start and stop the mySQL server, I have to do something like this /etc/init.d/mysqld stop /etc/init.d/mysqld start ps -ef|grep 'mysql' root 11331 20220 0 10:53 pts/0 00:00:00 grep mysql root 32452 1 0 Apr02 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --skip-grant-tables --skip-networking mysql 32504 32452 0 Apr02 ? 00:00:18 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --socket=/var/lib/mysql/mysql.sock --skip-grant-tables --skip-networking

  Read the article

• Ubuntu upgrade process failed

  - by Spin0us

  I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

  Read the article

• hdfs configuration

  - by Ananymous

  I am a newbie. Trying to setup a hdfs system to serve my data (I don't plan to use mapreduce) at my lab. So far I have read, cluster setup in but I am still confused. Several questions: Do I need to have a secondary namenode? There are 2 files, masters and slaves. Do I really need these 2 files eventhough I just want hdfs? If I need them, what should go in there? I assume my namenode in masters and datanodes as slaves? Do I need slaves nodes What configuration files are needed for namenode, secondary namenode, datanode and client? (I assume core-site.xml is needed for all 4)? In addition, can someone suggest a good configuration model? sample configuration for namenode, secondary namenode, datanode, and the client would be very helpful. I am getting confused because it seems most of the documentation assumes I want to use map-reduce which isn't the case.

  Read the article

• Apache showing 500 error during Active Directory LDAP authentication

  - by Tyllyn

  I have Apache (on Windows Server) set up to authenticate one directory through Active Directory. Config settings are as follows: <LocationMatch "/trac/[^/]+/login"> Order deny,allow Allow from all AuthBasicProvider ldap AuthzLDAPAuthoritative Off AuthLDAPURL ldap://<ip-redacted>:3268/cn=Users,OU=MyBusiness,DC=<dc-redacted>,DC=local?sAMAccountName?sub?(objectClass=*) AuthLDAPBindDN trac@<dc-redacted>.local AuthLDAPBindPassword "<password-redacted>" AuthType Basic AuthName "Protected" require valid-user </LocationMatch> Watching, Wireshark, I see the following get sent through when I visit the page: To the AD server: bindRequest(1) "trac@<dc-redacted>.local" simple And from the AD server: bindResponse(1) success I'm assuming this means that the auth was successful... but Apache doesn't think so. It returns a 500 server to me. Apache logs show the following: [Thu Nov 18 16:21:12 2010] [debug] mod_authnz_ldap.c(379): [client 192.168.x.x] [7352] auth_ldap authenticate: using URL ldap://<ip-redacted>:3268/cn=Users,OU=MyBusiness,DC=<dc-redacted>,DC=local?sAMAccountName?sub?(objectClass=*), referer: http://192.168.x.x/trac/Trac/login [Thu Nov 18 16:21:12 2010] [info] [client 192.168.x.x] [7352] auth_ldap authenticate: user authentication failed; URI /trac/Trac/login [ldap_search_ext_s() for user failed][Filter Error], referer: http://192.168.x.x/trac/Trac/login Now, that log file shows a failed auth for a blank user. I am confused. Any idea what I am doing wrong... and how I can get the Apache authentication working? :) Thanks!

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

  Read the article

• What is blocking incoming packets to port 67?

  - by Peter Robertson

  I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

  Read the article

• Use Apache authentication to Segregate access to Subversion subdirectories

  - by Stefan Lasiewski

  I've inherited a Subversion repository, running on FreeBSD and using Apache2.2 . Currently, we have one project, which looks like this. We use both local files and LDAP for authentication. <Location /> DAV svn SVNParentPath /var/svn AuthName "Staff only" AuthType Basic # Authentication through Local file (mod_authn_file), then LDAP (mod_authnz_ldap) AuthBasicProvider file ldap # Allow some automated programs to check content into the repo # mod_authn_file AuthUserFile /usr/local/etc/apache22/htpasswd Require user robotA robotB # Allow any staff to access the repo # mod_authnz_ldap Require ldap-group cn=staff,ou=PosixGroup,ou=foo,ou=Host,o=ldapsvc,dc=example,dc=com </Location> We would like to allow customers to access to certain subdirectories, without giving them global access to the entire repository. We would prefer to do this without migrating these sub-directories to their own repositories. Staff also need access to these subdirectories. Here's what I tried: <Location /www.customerA.com> DAV svn SVNParentPath /var/svn # mod_authn_file AuthType Basic AuthBasicProvider file AuthUserFile /usr/local/etc/apache22/htpasswd-customerA Require user customerA </Location> <Location /www.customerB.com> DAV svn SVNParentPath /var/svn # mod_authn_file AuthType Basic AuthBasicProvider file AuthUserFile /usr/local/etc/apache22/htpasswd-customerB Require user customerB </Location> I've tried the above. Access to '/' works for staff. However, access to /www.customerA.com and /www.customerB.com does not work. It looks like Apache is trying to authenticate the 'customerB' against LDAP, and doesn't try local password file. The error is: [Mon May 03 15:27:45 2010] [warn] [client 192.168.8.13] [1595] auth_ldap authenticate: user stefantest authentication failed; URI /www.customerB.com [User not found][No such object] [Mon May 03 15:27:45 2010] [error] [client 192.168.8.13] user stefantest not found: /www.customerB.com What am I missing?

  Read the article

• Touchpad stops working when plugging in new laptop PSU

  - by drahcir

  I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

  Read the article

• iperf max udp multicast performance peaking at 10Mbit/s?

  - by Tom Frey

  I'm trying to test UDP multicast throughput via iperf but it seems like it's not sending more than 10Mbit/s from my dev machine: C:\> iperf -c 224.0.166.111 -u -T 1 -t 100 -i 1 -b 1000000000 ------------------------------------------------------------ Client connecting to 224.0.166.111, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 1 UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [156] local 192.168.1.99 port 49693 connected with 224.0.166.111 port 5001 [ ID] Interval Transfer Bandwidth [156] 0.0- 1.0 sec 1.22 MBytes 10.2 Mbits/sec [156] 1.0- 2.0 sec 1.14 MBytes 9.57 Mbits/sec [156] 2.0- 3.0 sec 1.14 MBytes 9.55 Mbits/sec [156] 3.0- 4.0 sec 1.14 MBytes 9.56 Mbits/sec [156] 4.0- 5.0 sec 1.14 MBytes 9.56 Mbits/sec [156] 5.0- 6.0 sec 1.15 MBytes 9.62 Mbits/sec [156] 6.0- 7.0 sec 1.14 MBytes 9.53 Mbits/sec When I run it on another server, I'm getting ~80Mbit/s which is quite a bit better but still not anywhere near the 1Gbps limits that I should be getting? C:\> iperf -c 224.0.166.111 -u -T 1 -t 100 -i 1 -b 1000000000 ------------------------------------------------------------ Client connecting to 224.0.166.111, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 1 UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [180] local 10.0.101.102 port 51559 connected with 224.0.166.111 port 5001 [ ID] Interval Transfer Bandwidth [180] 0.0- 1.0 sec 8.60 MBytes 72.1 Mbits/sec [180] 1.0- 2.0 sec 8.73 MBytes 73.2 Mbits/sec [180] 2.0- 3.0 sec 8.76 MBytes 73.5 Mbits/sec [180] 3.0- 4.0 sec 9.58 MBytes 80.3 Mbits/sec [180] 4.0- 5.0 sec 9.95 MBytes 83.4 Mbits/sec [180] 5.0- 6.0 sec 10.5 MBytes 87.9 Mbits/sec [180] 6.0- 7.0 sec 10.9 MBytes 91.1 Mbits/sec [180] 7.0- 8.0 sec 11.2 MBytes 94.0 Mbits/sec Anybody has any idea why this is not achieving close to link limits (1Gbps)? Thanks, Tom

  Read the article

• FTP not listing directory NcFTP PASV

  - by Jacob Talbot

  I am attempting to setup Multicraft on my server, all is running smoothly however the FTP won't allow anyone to connect from a remote FTP client, where net2ftp will work smoothly from a remote location. I have included the transcript from my FTP client, Transmit below to give you an idea of what's going on. I have disabled iptables as well, and still no luck either way. Transmit 4.1.7 (x86_64) Session Transcript [Version 10.8.2 (Build 12C54)] (21/10/12 11:23 PM) LibNcFTP 3.2.3 (July 23, 2009) compiled for UNIX 220: Multicraft 1.7.1 FTP server Connected to ateam.bn-mc.net. Cmd: USER jacob.9 331: Username ok, send password. Cmd: PASS xxxxxxxx 230: Login successful Cmd: TYPE A 200: Type set to: ASCII. Logged in to ateam.bn-mc.net as jacob.9. Cmd: SYST 215: UNIX Type: L8 Cmd: FEAT 211: Features supported: EPRT EPSV MDTM MLSD MLST type*;perm*;size*;modify*;unique*;unix.mode;unix.uid;unix.gid; REST STREAM SIZE TVFS UTF8 End FEAT. Cmd: OPTS UTF8 ON 200: OK Cmd: PWD 257: "/" is the current directory. Cmd: PASV Could not read reply from control connection -- timed out. (SReadline 1)

  Read the article

• SQL Server 2008 R2 100% availability

  - by Mark Henderson

  Is there any way to provide 100% uptime on SQL Server 2008 R2? From my experience, the downtimes for the different replication methods are: Log Shipping: Lots (for DR only) Mirroring w. NLB: ~ 45 seconds Clustering: ~ 5-15 seconds And all of these solutions involve all of the connections being dropped from the source, so if the downtime is too long or the app's gateway doesn't support reconnection in the middle of task, then you're out of luck. The only way I can think to get around this is to abstract the clustering a level (by virtualising and then enabling VMWare FT. Yuck. Good luck getting this to work on a quad-socket, 32-core system anyway.). Is there any other way of providing 100% uptime of SQL Server?

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• using Linux vncviewer

  - by Darkoni

  when i am connecting to VNC server using wine on linux $ wine vncviewer.exe i have to enter: VNC Server: 1.1.1.21 Proxy/Reapeter: 195.29.18.33:1234 and then, when i connect, on top there is txt: 1.1.1.21:5900 (195.29.18.33:1234) mine question is: how to connect using vncviewer ? what to put in VNC_VIA_CMD ? $ export xlocalPort=1234 $ export xremoteHost=1.1.1.21 $ export xremotePort=5900 $ export xgateway=195.29.18.33 $ export VNC_VIA_CMD="/usr/bin/ssh -f -L $xlocalPort:$xremoteHost:$xremotePort $xgateway sleep 20" $ vncviewer $xremoteHost -via $xgateway and i get error: unable connect to socket: Connection refused (111) i was trying to help myself with page http://www.tightvnc.com/vncviewer.1.php Please help, couse i need to use "native" linux vncviewer installed by $ yum install tigervnc tigervnc.i686 0:1.0.90-0.13.20100420svn4030.fc13

  Read the article

• SSH works in putty but not terminal

  - by Ryan Naddy

  When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

  Read the article

• Grant HTTP access based on unix user group

  - by Sander Marechal

  Is it possible to grant network access or HTTP access based on a user's group? At my company we want to set up an internal composer server using Satis to manage packages for the projects we write (e.g. on repository.mycompany.com), with the packages themselves in our SVN server (svn.mycompany.com). We have several webservers with many different users on them. Some users should be able to reach the composer and SVN server. Some should not. Users that should be able to reach these servers all belong to the same group. How can I set up Apache on the Composer and SVN server to only grant access to those users in that group? Alternatively, can I set up the webservers in such a way that only users from that group are able to make a connection to our Composer and SVN servers? The best thing we have come up with so far is using SSL client certificates. We simply place a client certificate on all servers which can be used to access Composer and SVN. Only the right usergroup will have read access to the certificate. A bit clunky but it may work. But I'm looking for something better.

  Read the article

• Central Authentication For Windows, Linux, Network Devices

  - by mojah

  I'm trying to find a way to centralize user management & authentication for a large collection of Windows & Linux Servers, including network devices (Cisco, HP, Juniper). Options include RADIUS/LDAP/TACACS/... Idea is to keep track with staff changes, and access towards these devices. Preferably a system that is compatible with both Linux, Windows & those network devices. Seems like Windows is the most stubborn of them all, for Linux & Network equipment it's easier to implement a solution (using PAM.D for instance). Should we look for an Active Directory/Domain Controller solution for Windows? Fun sidenote; we also manage client systems, that are often already in a domain. Trust-relationships between Domain Controllers isn't always an option for us (due to client security restrictions). I'd love to hear fresh ideas on how to implement such a centralized authentication "portal" for those systems.

  Read the article

• What options to use for Accurate bacula backup?

  - by Kiss Stefan

  It's actually 2 question in one. First is a bit more theoretically. So when specifying accurate options how does bacula figure out if a file needs to be backed up ? it's a simple AND ? As in if the options are Accurate = sm5 bacula will not backup the file if ((size = old size) AND (modtime = old modtime) AND (md5 = old md5)) Is that correct ? Do any of the options take precedence ? as in would be a file skipped if modif time is diffreent but it has the same md5sum ? Are there any implied options that you cannot ignore ? Practical case, ( bacula 5.0.1 ) I have to back-up a svn repo, in order to be able to make incremental backups as simple as posible i am hotcopying (client run before) it to another location, that bacula will backup ( then delete it with client run after). Now in the fileset i have Accurate = spnd5 This should tell bacula to take into consideration size , permission bits number of links , decreases in size and md5sum. However , an incremental is also including a full copy of the svn. What am i doing wrong ? it seems that it takes into account creation time even tho i have not specified it.

  Read the article

• Nginx + PHP-FPM Timeouts, almost zero load consumption?

  - by javipas

  I've got a server running on a Linode with Ubuntu 10.04 LTS, Nginx 0.7.65, MySQL 5.1.41 and PHP 5.3.2 with PHP-FPM. There is a WordPress blog on it, updated to WordPress 3.2.1 recently. I have made no changes to the server (except updating WordPress) and while it was running fine, a couple of days ago I started having downtimes. I tried to solve the problem, and checking the error_log I saw many timeouts and messages that seemed to be related to timeouts. The server is currently logging this kind of errors: 2011/07/14 10:37:35 [warn] 2539#0: *104 an upstream response is buffered to a temporary file /var/lib/nginx/fastcgi/2/00/0000000002 while reading upstream, client: 217.12.16.51, server: www.mydomain.com, request: "GET /page/2/ HTTP/1.0", upstream: "fastcgi://127.0.0.1:9000", host: "www.mydomain.com", referrer: "http://www.mydomain.com/" 2011/07/14 10:40:24 [error] 2539#0: *231 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 46.24.245.181, server: www.mydomain.com, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.mydomain.com", referrer: "http://www.google.es/search?sourceid=chrome&ie=UTF-8&q=mydomain" and even saw this previous serverfault discussion with a possible solution: to edit /etc/php/etc/php-fpm.conf and change request_terminate_timeout=30s instead of ;request_terminate_timeout= 0 The server worked for some hours, and then broke again. I edited the file again to leave it as it was, and restarted again php-fpm (service php-fpm restart) but no luck: the server worked for a few minutes and back to the problem over and over. The strange thing is, although the services are running, htop shows there is no CPU load (see image) and I really don't know how to solve the problem. The config files are on pastebin The php-fpm.conf file is here The /etc/nginx/nginx.conf is here The /etc/nginx/sites-available/www.mydomain.com is here Please help :(

  Read the article

• Cannot Access Shared Folder From IIS

  - by Tim Scott

  From IIS I need to access a folder on another computer. Both servers are Window 2008 SP2, and they live in a Virtual Private Cloud on Amazon EC2. They reach one another by private IP -- they are in WORKGROUP, not a domain. I can access the shared folder manually when logged in to the client as Administrator. But IIS gets "access denied." Here's what I have done: Set File Sharing = ON Set Password Protected Sharing = OFF Set Public Folder Sharing = ON Shared the folder Added permission to the share: Everyone, Full Control Added permission to the share: NETWORK SERVICE, Full Control Verified that File & Printer Sharing is checked in Windows Firewall Opened port 445 to inbound traffic from local sources I tried adding <remote-machine-name>\NETWORK SERVICE to the share but it says it does not recognize the machine, which makes sense, I guess. As I said, from the other computer I have no trouble accessing the shared folder from my user account, but IIS is shut out. How does the file server even know the difference? I would assume that with Everyone given full control and password protected sharing turned off, it would not matter what the client user account is. In any case, how to solve? UPDATE: To clarify, I am not trying to serve up files on the share directly through IIS. Rather I am writing files to the share from my code (System.IO).

  Read the article

< Previous Page | 502 503 504 505 506 507 508 509 510 511 512 513  | Next Page >