Search Results

Search found 18380 results on 736 pages for 'index usage'.

Page 507/736 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• Slow filesystem access

  - by danneh3826

  I'm trying to diagnose a slow filesystem issue on a server I look after. It's been ongoing for quite some time, and I've run out of ideas as to what I can try. Here's the thick of it. The server itself is a Dell Poweredge T310. It has 4 SAS hard drives in it, configured at RAID5, and is running Citrix XenServer 5.6. The VM is a (relatively) old Debian 5.0.6 installation. It's given 4 cores, and 4Gb's of RAM. It has 3 volumes. A 10Gb volume (ext3) for the system, 980Gb volume (xfs) for data (~94% full), and another 200Gb volume (xfs) for data (~13% full). Now here's the weird thing. Read/write access to the 980Gb volume is really slow. I might get 5Mb/s out of it if I'm lucky. At first I figured it was actually disk access in the system, or at a hypervisor level, but ruled that out entirely as other VMs on the same host are running perfectly fine (a good couple hundred Mb/s disk r/w access). So then I started to target this particular VM. I started thinking it was XFS, but to prove it I wasn't going to attempt to change the filesystem on the 980Gb drive, with years and years of billions of files on there. So I provisioned the 200Gb drive, and did the same read/write test (basically dd), and got a good couple hundred Mb/s r/w access to it. So that ruled out the VM, the hardware, and the filesystem type. There's also a lot of these in /var/log/kern.log; (sorry, this is quite long) Sep 4 10:16:59 uriel kernel: [32571790.564689] httpd: page allocation failure. order:5, mode:0x4020 Sep 4 10:16:59 uriel kernel: [32571790.564693] Pid: 7318, comm: httpd Not tainted 2.6.32-4-686-bigmem #1 Sep 4 10:16:59 uriel kernel: [32571790.564696] Call Trace: Sep 4 10:16:59 uriel kernel: [32571790.564705] [<c1092a4d>] ? __alloc_pages_nodemask+0x476/0x4e0 Sep 4 10:16:59 uriel kernel: [32571790.564711] [<c1092ac3>] ? __get_free_pages+0xc/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564716] [<c10b632e>] ? __kmalloc+0x30/0x128 Sep 4 10:16:59 uriel kernel: [32571790.564722] [<c11dd774>] ? pskb_expand_head+0x4f/0x157 Sep 4 10:16:59 uriel kernel: [32571790.564727] [<c11ddbbf>] ? __pskb_pull_tail+0x41/0x1fb Sep 4 10:16:59 uriel kernel: [32571790.564732] [<c11e4882>] ? dev_queue_xmit+0xe4/0x38e Sep 4 10:16:59 uriel kernel: [32571790.564738] [<c1205902>] ? ip_finish_output+0x0/0x5c Sep 4 10:16:59 uriel kernel: [32571790.564742] [<c12058c7>] ? ip_finish_output2+0x187/0x1c2 Sep 4 10:16:59 uriel kernel: [32571790.564747] [<c1204dc8>] ? ip_local_out+0x15/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564751] [<c12055a9>] ? ip_queue_xmit+0x31e/0x379 Sep 4 10:16:59 uriel kernel: [32571790.564758] [<c1279a90>] ? _spin_lock_bh+0x8/0x1e Sep 4 10:16:59 uriel kernel: [32571790.564767] [<eda15a8d>] ? __nf_ct_refresh_acct+0x66/0xa4 [nf_conntrack] Sep 4 10:16:59 uriel kernel: [32571790.564773] [<c103bf42>] ? _local_bh_enable_ip+0x16/0x6e Sep 4 10:16:59 uriel kernel: [32571790.564779] [<c1214593>] ? tcp_transmit_skb+0x595/0x5cc Sep 4 10:16:59 uriel kernel: [32571790.564785] [<c1005c4f>] ? xen_restore_fl_direct_end+0x0/0x1 Sep 4 10:16:59 uriel kernel: [32571790.564791] [<c12165ea>] ? tcp_write_xmit+0x7a3/0x874 Sep 4 10:16:59 uriel kernel: [32571790.564796] [<c121203a>] ? tcp_ack+0x1611/0x1802 Sep 4 10:16:59 uriel kernel: [32571790.564801] [<c10055ec>] ? xen_force_evtchn_callback+0xc/0x10 Sep 4 10:16:59 uriel kernel: [32571790.564806] [<c121392f>] ? tcp_established_options+0x1d/0x8b Sep 4 10:16:59 uriel kernel: [32571790.564811] [<c1213be4>] ? tcp_current_mss+0x38/0x53 Sep 4 10:16:59 uriel kernel: [32571790.564816] [<c1216701>] ? __tcp_push_pending_frames+0x1e/0x50 Sep 4 10:16:59 uriel kernel: [32571790.564821] [<c1212246>] ? tcp_data_snd_check+0x1b/0xd2 Sep 4 10:16:59 uriel kernel: [32571790.564825] [<c1212de3>] ? tcp_rcv_established+0x5d0/0x626 Sep 4 10:16:59 uriel kernel: [32571790.564831] [<c121902c>] ? tcp_v4_do_rcv+0x15f/0x2cf Sep 4 10:16:59 uriel kernel: [32571790.564835] [<c1219561>] ? tcp_v4_rcv+0x3c5/0x5c0 Sep 4 10:16:59 uriel kernel: [32571790.564841] [<c120197e>] ? ip_local_deliver_finish+0x10c/0x18c Sep 4 10:16:59 uriel kernel: [32571790.564846] [<c12015a4>] ? ip_rcv_finish+0x2c4/0x2d8 Sep 4 10:16:59 uriel kernel: [32571790.564852] [<c11e3b71>] ? netif_receive_skb+0x3bb/0x3d6 Sep 4 10:16:59 uriel kernel: [32571790.564864] [<ed823efc>] ? xennet_poll+0x9b8/0xafc [xen_netfront] Sep 4 10:16:59 uriel kernel: [32571790.564869] [<c11e40ee>] ? net_rx_action+0x96/0x194 Sep 4 10:16:59 uriel kernel: [32571790.564874] [<c103bd4c>] ? __do_softirq+0xaa/0x151 Sep 4 10:16:59 uriel kernel: [32571790.564878] [<c103be24>] ? do_softirq+0x31/0x3c Sep 4 10:16:59 uriel kernel: [32571790.564883] [<c103befa>] ? irq_exit+0x26/0x58 Sep 4 10:16:59 uriel kernel: [32571790.564890] [<c118ff9f>] ? xen_evtchn_do_upcall+0x12c/0x13e Sep 4 10:16:59 uriel kernel: [32571790.564896] [<c1008c3f>] ? xen_do_upcall+0x7/0xc Sep 4 10:16:59 uriel kernel: [32571790.564899] Mem-Info: Sep 4 10:16:59 uriel kernel: [32571790.564902] DMA per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564905] CPU 0: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564908] CPU 1: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564911] CPU 2: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564914] CPU 3: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564916] Normal per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564919] CPU 0: hi: 186, btch: 31 usd: 175 Sep 4 10:16:59 uriel kernel: [32571790.564922] CPU 1: hi: 186, btch: 31 usd: 165 Sep 4 10:16:59 uriel kernel: [32571790.564925] CPU 2: hi: 186, btch: 31 usd: 30 Sep 4 10:16:59 uriel kernel: [32571790.564928] CPU 3: hi: 186, btch: 31 usd: 140 Sep 4 10:16:59 uriel kernel: [32571790.564931] HighMem per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564933] CPU 0: hi: 186, btch: 31 usd: 159 Sep 4 10:16:59 uriel kernel: [32571790.564936] CPU 1: hi: 186, btch: 31 usd: 22 Sep 4 10:16:59 uriel kernel: [32571790.564939] CPU 2: hi: 186, btch: 31 usd: 24 Sep 4 10:16:59 uriel kernel: [32571790.564942] CPU 3: hi: 186, btch: 31 usd: 13 Sep 4 10:16:59 uriel kernel: [32571790.564947] active_anon:485974 inactive_anon:121138 isolated_anon:0 Sep 4 10:16:59 uriel kernel: [32571790.564948] active_file:75215 inactive_file:79510 isolated_file:0 Sep 4 10:16:59 uriel kernel: [32571790.564949] unevictable:0 dirty:516 writeback:15 unstable:0 Sep 4 10:16:59 uriel kernel: [32571790.564950] free:230770 slab_reclaimable:36661 slab_unreclaimable:21249 Sep 4 10:16:59 uriel kernel: [32571790.564952] mapped:20016 shmem:29450 pagetables:5600 bounce:0 Sep 4 10:16:59 uriel kernel: [32571790.564958] DMA free:2884kB min:72kB low:88kB high:108kB active_anon:0kB inactive_anon:0kB active_file:5692kB inactive_file:724kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15872kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:5112kB slab_unreclaimable:156kB kernel_stack:56kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564964] lowmem_reserve[]: 0 698 4143 4143 Sep 4 10:16:59 uriel kernel: [32571790.564977] Normal free:143468kB min:3344kB low:4180kB high:5016kB active_anon:56kB inactive_anon:2068kB active_file:131812kB inactive_file:131728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:715256kB mlocked:0kB dirty:156kB writeback:0kB mapped:308kB shmem:4kB slab_reclaimable:141532kB slab_unreclaimable:84840kB kernel_stack:1928kB pagetables:22400kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564983] lowmem_reserve[]: 0 0 27559 27559 Sep 4 10:16:59 uriel kernel: [32571790.564995] HighMem free:776728kB min:512kB low:4636kB high:8760kB active_anon:1943840kB inactive_anon:482484kB active_file:163356kB inactive_file:185588kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3527556kB mlocked:0kB dirty:1900kB writeback:60kB mapped:79756kB shmem:117796kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.565001] lowmem_reserve[]: 0 0 0 0 Sep 4 10:16:59 uriel kernel: [32571790.565011] DMA: 385*4kB 16*8kB 3*16kB 9*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2900kB Sep 4 10:16:59 uriel kernel: [32571790.565032] Normal: 21505*4kB 6508*8kB 273*16kB 24*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 143412kB Sep 4 10:16:59 uriel kernel: [32571790.565054] HighMem: 949*4kB 8859*8kB 7063*16kB 6186*32kB 4631*64kB 727*128kB 6*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 776604kB Sep 4 10:16:59 uriel kernel: [32571790.565076] 198980 total pagecache pages Sep 4 10:16:59 uriel kernel: [32571790.565079] 14850 pages in swap cache Sep 4 10:16:59 uriel kernel: [32571790.565082] Swap cache stats: add 2556273, delete 2541423, find 82961339/83153719 Sep 4 10:16:59 uriel kernel: [32571790.565085] Free swap = 250592kB Sep 4 10:16:59 uriel kernel: [32571790.565087] Total swap = 385520kB Sep 4 10:16:59 uriel kernel: [32571790.575454] 1073152 pages RAM Sep 4 10:16:59 uriel kernel: [32571790.575458] 888834 pages HighMem Sep 4 10:16:59 uriel kernel: [32571790.575461] 11344 pages reserved Sep 4 10:16:59 uriel kernel: [32571790.575463] 1090481 pages shared Sep 4 10:16:59 uriel kernel: [32571790.575465] 737188 pages non-shared Now, I've no idea what this means. There's plenty of free memory; total used free shared buffers cached Mem: 4247232 3455904 791328 0 5348 736412 -/+ buffers/cache: 2714144 1533088 Swap: 385520 131004 254516 Though now I see the swap is relatively low in size, but would that matter? I've been starting to think about fragmentation, or inode usage on that large partition, but a recent fsck on it showed is as only like 0.5% fragmented. Which leaves me with inode usage, but how much of an effect really would a large inode table or filesystem TOC have? I've love to hear people's opinions on this. It's driving me potty! df -h output; Filesystem Size Used Avail Use% Mounted on /dev/xvda1 9.5G 6.6G 2.4G 74% / tmpfs 2.1G 0 2.1G 0% /lib/init/rw udev 10M 520K 9.5M 6% /dev tmpfs 2.1G 0 2.1G 0% /dev/shm /dev/xvdb 980G 921G 59G 94% /data

  Read the article

• Nginx + PHP-FPM Too Many Resources

  - by user3393046

  My Server has the following Specs CPU: 6 Cores Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz RAM: 32 GB I have a problem with nginx+php-fpm. They are taking too many resources for an unknown reason. Even if i restart the nginx + php-fpm the start up processes will use many resources. My nginx Config is the following: user nginx; worker_processes auto; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; worker_rlimit_nofile 300000; events { worker_connections 6000; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; include /etc/nginx/conf.d/*.conf; } My php-fpm pool config is the following [www] user = nginx group = nginx listen = /var/run/php5-fpm.sock listen.owner = nginx listen.group = nginx listen.allowed_clients = 127.0.0.1 pm = ondemand pm.max_children = 1500; pm.process_idle_timeout = 5; chdir = / security.limit_extensions = .php I'm using on pm.ondemand since my website has to support many concurrent connections at the same time and i was unable to to it with dynamic/static. I guess this isnt the problem because as i said earlier when i restart nginx+php-fpm at the same time, they are taking too much resources without any request. Here is the screenshot with the CPU Usage http://s28.postimg.org/v54q25zod/Untitled.png

  Read the article

• MySQL consuming all system memory on INSERT ... SELECT

  - by siete

  The mysql daemon is getting killed because Linux is reaching out of memory: Oct 24 07:41:23 <hostname> kernel: [82297.673701] Out of memory: kill process 13816 (mysqld) score 1839626 or a child There is a link with some workaround on this. That only happen when executing a query INSERT ... SELECT with a very huge resulset. MySQLTuner script displays that maximum theorical memory is less than 8GB, but top and munim shows that is getting over all RAM and swap available: [--] Total buffers: 560.0M global + 72.2M per thread (100 max threads) [OK] Maximum possible memory usage: 7.6G (43% of installed RAM) I'm tried to tune some options with not results, there are the relevant ones: skip-locking max_connections = 100 key_buffer_size = 512M max_allowed_packet = 32M table_open_cache = 2000 open_files_limit = 3000 sort_buffer_size = 16M read_buffer_size = 16M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 4 query_cache_size = 16M query_cache_limit = 2M thread_concurrency = 4 join_buffer_size = 32M tmp_table_size = 32M max_heap_table_size = 32M query_cache_limit = 8M bulk_insert_buffer_size = 64M myisam_max_sort_file_size = 50GB myisam_mmap_size = 10GB And there is a system resume: OS: Linux Debian "Squeeze" 6.0.8 (upgraded yesterday) RAM: 18GB Swap: 18GB MySQL: 5.1.72-2 (official Debain release) At this moment, update or change OS or MySQL version is not possible, there is any option that can help and i missed? Sorry by my english, and thank you in advance! Edit: I'm only using MyISAM tables, and cannot change to InnoDB.

  Read the article

• SQL Server becomes slow after restart

  - by Tobi DM

  I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

  Read the article

• ClassNotFoundException returned for all plugins

  - by razumny

  I am trying to use a Java applet (any Java Applet), but I always get a messages saying "Error. Click for details". When I do so, the pop-up says: Application Error ClassNotFoundException jreVerification.class When I click the "Details" button, all I see is the following: Java Plug-in 10.7.2.10 Using JRE version 1.7.0_07-b10 Java HotSpot(TM) Client VM User home directory = C:\Users\razumny ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ---------------------------------------------------- I am running Windows 7 Professional, and am up to date on patches. The problem occurs in Google Chrome, Mozilla Firefox and Internet Explorer, regardless of what Java Applet I am running. The error I quoted above came from here: http://java.com/en/download/installed.jsp?detect=jre I have attempted the following to rectify the issue: Uninstall and reinstall Java Uninstall Java, reboot, install Java Uninstall Java, delete all registry entries, reboot, install Java In addition, I have run Malware and Virus scans, none of which have shown anything of relevance. At this point, I am at my wit's end, and so, I turn to you.

  Read the article

• Bandwidth Suggestion

  - by Campo

  I have been asked to analyze the bandwidth usage of a company and make a recommendation for upgrading their Internet connection(s). Here is the layout 3 DLS lines so it is 3x(6 Down, 1 Up Each) into a load balancer out to the office's network. 30 VOIP phones run on a T1 (1.5 Down, 1.5 Up) The users at the company are heavily uploading. It is my suspicion that the issue in slowdown is being cause by multiple people uploading and others not being able to get requests out for even simple http requests. My initial idea is to get them a fiber line with a 10 down and 10 up. What do others think on this plan? Will that be enough to host their network traffic? What do I do about the VOIP line afterward? The fiber is expensive and I know the T1 does a great job for their VOIP so I do not want to suggest a DSL line because I know it may not be sufficient. I would also like to save them some money if I can. Maybe even get a faster fiber line and forgo the T1. Though I know their load balance/switch can only handle 20MB/S throughput. Looking for some confirmation/suggestions on my plan. I am planning on going in to get some real diagnostic numbers. Any suggestions on software to use for that? Preferably Windows software.

  Read the article

• heavy load on mysql

  - by payal

  i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql however only one database is running and 5-10 pages are only running. However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• heavy load on mysql

  - by payal

  i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql i am running a music wesbite however only one database is running and 5-10 pages are only running.when i click on whm show processlist it shows only 2-3 processes However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. my.conf file is [mysqld] key_buffer = 1536M max_allowed_packet = 1M max_connections = 250 max_user_connections = 15 wait_timeout=40 connect_timeout=10 table_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M server-id = 14 old-passwords = 1 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [myisamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

  Read the article

• Loading a big database dump into PostgreSQL using cat

  - by RussH

  I have a pair of very large (~17 GB) database dumps that I want to load into postgresql 9.3. After installing the database packages, learning more or less how to use them, and fiddling around a little on various StackExchange pages (particularly this question), it looks like a proper command for me to use is something like: cat mydb.pgdump | psql mydb because of the format the dump is in. My machine has 16 GB of RAM, and I'm not familiar with the cat command but I do know that my RAM is 99% exhausted and the database is taking a while to load. My machine isn't non-responsive to the point of hanging; I can run other commands in other terminal windows and have them execute at a reasonable clip, but I am wondering if cat is the best way to pipe in the file or if something else is more efficient? My concern is that maybe cat could be using up all the RAM so the database doesn't have much to work with, throttling its performance. But I'm new to thinking about RAM issues like this and don't know if I'm worrying about nothing. Now that I think about it, this seems to be more of a question about cat and its memory usage than anything else. If there is a more appropriate forum for this question please let me know. Thanks!

  Read the article

• What Is The Proper Laptop Battery Care While Running Laptop Solely On Battery?

  - by Boris_yo

  Because of convenience, I had to move my laptop to another room away from room where I always ran laptop on UPS without using battery. Since so far I always run laptop on battery, I question the proper usage to prolong battery life. Currently I run laptop on battery with power supply so battery is constantly being charged until it is full 100% and when it is, I disconnect power supply and continue working until battery meter shows 10% remaining. That's when I plug in power supply and let it charge until 100% once again while I work. But it takes a lot of time to fully charge laptop while working since my power supply is 60W which should be the reason of such slow charge and I think the kind of charger that I use is express charger. The thought of charging laptop until full, all while doing my work makes me think that if it takes way more time to charge, it might keep battery running warm for the period of charging time which brings me to question about whether I should keep running laptop as I've described above or it would be better to leave power supply constantly connected to laptop to keep battery between 99%-100%? On one hand it won't keep battery warm but it will try to frequently supply charge to battery once it gets 99% to replenish charge to 100% (which might reduce battery life?). On the other hand if I'll keep working solely on battery and recharge it when below 10%, the battery will get warm but only when charged. Can anybody suggest the correct way of running laptop on battery to ensure better battery life? Dell Latitude E6420 Windows 7 64-bit

  Read the article

• Is there a way to exclude a specific drive vdi from "snapshots" in VirtualBox?

  - by Graza

  ...or is there another space-efficient way of dealing with the page/swap file of the Guest O/S? I've realised that its quite possible/likely that one of the things which "bloats" the snapshot/diff vdi's when a snapshot is taken is the guest operating system's pagefile. For example, say I have a 2Gb swap-file in a Windows guest OS, and over the course of a few weeks the usage of the swap file has gone over 1Gb a couple of times. When I next create a snapshot, it seems likely that I'd be almost guaranteed around 1Gb of space taken up in the new differencing disk just because of changes in the swap file. Obviously (provided I never did "live" snapshots on running or paused machines, and only ever did them when the machine was shut down), I would not need any of the information in the swap file to be saved. So this would simply be a waste of 1Gb. I'm wondering if there's a way to attach a vdi to a VM and flag it as "exclude from snapshots" - which would mean I could put the swap file on a different vdi which would never be included in a snapshot. Or if anyone has any other suggestions. Or an explanation about why it might not be an issue. I could obviously delete and recreate a swap drive vdi every time I did a snapshot to achieve the same effect, but this is a little more effort than simply clicking "create snapshot"....

  Read the article

• Backup solution to backup terabytes and lots of static files on linux server?

  - by user28679

  Which backup tool or solution would you use to backup terabytes and lots of files on a production linux server ? Note that the files are all different and almost never modified, and usage is mostly adding files, so data volume is today 3TB growing all the time at around +15GB/day. Please do not reply rsync. Basic unix tools are not enough, rsync does not keep history, rdiff-backup miserably fails from time to time and screw the history. Moreover these are all file based backup, which put a lot of IOwait just to browse directories and query stat(). But i guess, except R1Soft CDP, there is no way around that. We tried R1Soft CDP backup, which is block level backup, and it proved good and efficient for all our other servers, but systematically fails on the server with 3 terabytes and gazillions of files. That is already more than 2 months that the engineers of R1Soft and datacenter are playing a hot ball game... and still no backup except regular rsync We never tried big commercial solutions, except R1Soft CDP since it was provided as an optional service by the datacented hosting our servers.

  Read the article

• How do you notice that the batteries of you wireless mouse are dying out?

  - by hkBattousai

  I have a Logitech M705 wireless mouse. I'm first time using a wireless mouse, so I don't have much experience with the hardware features and behavior. It is rated that it runs for 3 years with the same batteries. I think this "3 year" rating is calculated for a very low usage and activity; like 2 hours a day. I'm using it for about 12 hours a day, so I expect it to run out of batteries in a much shorter time in my case. I have been using it for about half a year. Recently (for the last two weeks), it started to make some peculiar behavior when clicking and drafging objects. - When I click something, it sometimes double click it. - When I drag something from one place to another (or selecting some text), it sometimes drops the object in the halfway (when selecting text, the text which had selected up to that time becomes unselected and it starts to select the rest of the text from that moment), but it goes on being in the "left-button-pressed" state. It is like, the pressed button switches to "unpressed" state for a moment, then returns back to the "pressed" state. When one of these faults occur, it occurs several times sequentially. There is no problem in pointer movement, scrolling or right-clicking. Since the batteries last for a very long time for this device, I don't expect it to stop working in an instance. I expect it to give these kind of syndromes of a time period. My question is; Is this how batteries run out for a wireless mouse? Or, is this another kind of hardware/software problem?

  Read the article

• Solr startup script problem

  - by Camran

  I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

  Read the article

• ESXi 5 Guests will not boot

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

  Read the article

• Knowledge and user generated content management system to track files, research, proposals, etc.?

  - by Eshwar

  I'll try keep it short. Here's the scenario: We have employees all over the world performing similar work i.e. research, generating powerpoint slides, word documents, graphics, etc. Many times a lot of this previous work can be reused for another future project. The current arrangement is email and phone calls which as you would agree is quick if you know where to look but otherwise archaic and very very inefficient. So I am looking for software that will allow me to do the following: Tag files e.g. an investor presentation on cellphone usage in kenya would be tagged investor, cellphone, kenya Manage references e.g. if we read something on the internet, should be able to paste that link in some fashion and tag it as above. Preferably cloud based so that it can be accessed by anybody and additionally would be nice (though NOT must) to have access levels (director, manager, everyone) A nice interface that non technically savvy folks can warm up to ;) A desktop app would be handy so that people don't always have to click upload or something A tree based system is inefficient in this case because content is usually linked across branches and also people might not quite agree on one format of a tree. Tagging works around this very nicely. What I have considered so far: Evernote (for its more professional look) Springpad (for its versatility with content) Mendeley (this is a research manager and in some ways ideal, but i fear its limited to PDFs) The goal is that when somebody wants to look for a document, they don't have to ask a colleague, they can just search with keywords and all relevant information shows up. Thanks!

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• erlyvideo server doesn't start automatically after reboot

  - by electroid

  I have installed erlyvideo server on ubuntu 9.10 karmic koala. Everything works fine, but after server reboot I have to start erlyvideo server manually with /etc/init.d/erlyvideo start. I try allready update-rc.d and I think erlyvideo by default should start automaticaly. Any help will be appreciated. Here erlyvideo startup script located in /etc/init.d/erlyvideo: #!/bin/sh ### BEGIN INIT INFO # Provides: erlyvideo # Required-Start: $local_fs $network # Required-Stop: $local_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts the erlyvideo streaming server # Description: starts the erlyvideo using erlang system ### END INIT INFO case "$1" in start) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; stop) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; soft-restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; upgrade) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reconfigure) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reboot) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; ping) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; console) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach-erl) cd /opt/erlyvideo && ./erts-5.8.4/bin/erl -name [email protected] -remsh [email protected] ;; *) echo $"Usage: $0 {start|stop|restart|soft-restart|upgrade|reboot|ping|console|attach}" exit 1 esac exit 0 And I have found S91erlyvideo in /etc/rc2.d next to S91apache2 which starts just fine on every reboot.

  Read the article

• Procurve Primary VLAN

  - by fukawi2

  I'm trying to depreciate usage of VLAN 1 on my ProCurve switches; 1 is unused. I understand that VLAN 1 must exist, but I want to remove it from all ports, especially trunks between switches. The problem I have is that stacking does not seem to work without VLAN 1. I have changed the primary VLAN and management VLAN on all the switches: (config)# primary-vlan 42 (config)# management-vlan 42 (config)# no vlan 1 untagged 25 Port 25 is the link between the 2 switches I'm testing with; the stack master and a member switch; I only want tagged traffic between the switches, no untagged frames. show stacking on the master shows all members as "UP" but I can not telnet any of them: Telnet failed: Connection timed out. All switches have manually assigned (static) IP addresses on VLAN 42, and all exist in the same /25 subnet, as does my desktop. I can telnet the switches directly from my desktop to the individual switch IP addresses, just not from the master switch. Do I need to reboot the switches to have the primary-vlan change take effect? Or is there something else I'm missing?

  Read the article

• RD Gateway reporting features/capabilities

  - by Don

  We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

  Read the article

• Which AMI to to use for Java/Tomcat/MySQL in Amazon EC2?

  - by Justin

  I originally posted this on stackoverflow.com and it was suggested serverfault.com might be a better place to ask this question. So here goes: I'm trying to determine which Amazon Machine Image (AMI) to use as my Virtual Server in Amazon's EC2. For now, I'll need to choose an AMI that complies with the AWS Free Usage Tier. I want to deploy a Java app that I've been developing using Eclipse on Windows XP, Tomcat 7 and MySQL 5.5. I'm aware that I can choose the Basic 32-bit Amazon Linux AMI. Then I'd manually install Tomcat and MySQL (does MySQL get installed on the image or separately on an Elastic Block Store (EBS)?). Here's the rub, I'm a bit of a Linux noob. I can start Tomcat and tail the logs and such on Linux but I'm not familiar with the install process for Tomcat and MySQL on Linux and commands like sudo and chmod. I'm happy to get more hands on with Linux but I'm short on time right now. Are there AMI's that already have Tomcat and MySQL bundled? The Request Instance Wizard shows 805 Community AMI's that are Free Tier Eligible. 51 of the Free Tier Eligible AMI's have "Tomcat" in their name. I'm willing to consider using Elastic Beanstalk but my research thus far hasn't found any discussion of using MySQL with Beanstalk. The discussions all seem to use Amazon's SimpleDB. Any advice is greatly appreciated.

  Read the article

• Windows 7 Busy Icon won't stop spinning

  - by Lynda

  In windows 7 you have the busy icon that is a little blue wheel spinning beside the cursor when it is doing something. It has started to spin for about a second every 3-5 seconds. There is noting running that I can tell on the computer to cause the busy icon. It gets very annoying and I am not sure what to do to get it to stop. Ideas? Running a CPU Usage Gadget says I have less than 5% of the CPU being use and I have over 6GB of RAM free. (I have 8GB total) I am running a 3.6 GHZ AMD FX 4100 processor. EDIT- What I am actually seeing is the working in background pointer (the pointer is still visible beside the busy icon). EDIT 2 - After realizing this happened with the printer installation I turned on the the printer and the busy icon stopped. The printer is setup wirelessly. How do I stop Windows from (I guess) checking for the printer? That is what I assume it is doing. I am using a HP Officejet 8600

  Read the article

• Membership in two domains

  - by imagodei

  Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

  Read the article

• Nginx proxy to IIS Connection Timeout

  - by MitMaro

  I am having an issue with random timeouts with a Nginx proxy connecting to an IIS machine. I have been watching a packet capture between the two servers and it seems that the IIS machine is receiving a SYN packet but is not responding with what I think should be an ACK response. Before the timeout occurs there seems to be a slower response from the IIS server. There is no unusual memory or processor usage on the IIS or Nginx machine. Some information on the servers and setup: Nginx Machine: Ubuntu 10.04 64bit Nginx 0.7.65 Amazon EC2 Windows Machine: Windows Server 2008 IIS 7 ASP.net Application in Integrated Mode Nginx Error: 2011/01/10 17:57:40 [error] 8297#0: *30 connect() failed (110: Connection timed out) while connecting to upstream, client: 209.***.***.***, server: secure.example.com, request: "GET /a/path/deliver.aspx HTTP/1.1", upstream: "http://***.***.***.****:****//another/path/deliver.aspx", host: "secure.example.com" WireShark Packets 6521.449528 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422103 TSER=0 WS=7 6524.443239 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422403 TSER=0 WS=7 6530.443241 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477423003 TSER=0 WS=7

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >