Search Results

Search found 14439 results on 578 pages for 'folder customization'.

Page 508/578 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• Spotlight has stopped indexing/returning anything in /Applications

  - by pra

  After a recent kernel panic & restart, Spotlight no longer seems to know anything about the files under my /Applications folder. I used to launch Safari.app, Opera.app, Textedit.app, etc via Spotlight as a matter of routine. Now, I get "No results found" for all of them (except Textedit.app, which launches a demo text editor from a Qt installation). The programs are still there & still launch directly from Finder. I've already run disk utility & verified the disk, no issues. I repaired disk permissions, which made several changes, but to no effect. Is there anything else I can do, short of re-installing MacOS? Update: I already verified that "Applications" was still checked in my Spotlight preferences. It was still returning applications located elsewhere (the Qt textedit sample app), so that shouldn't have been the issue. A few hours later it resolved itself; I guess there's a background process running on some interval.

  Read the article

• Coldfusion:-Firefox can't establish a connection to the server at localhost

  - by Fransis

  I installed Coldfusion 8 trial version on my system (XP Professional sp3). I created an Folder in the “C:/Coldfusion8/wwwroot” called “buildProject” containing an Index.cfm and some other .cfm files. But I am unable to access the Neither my project files or CFIDE/Administrator I tried the following URLS http://localhost:8500/wwwroot/buildProject/ http://localhost:8500/CFIDE/administrator/index.cfm http:// 127.0.0.1:8500/wwwroot/buildProject/ http:// 127.0.0.1:8500/CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/index.cfm http://localhost /CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/ http://localhost /CFIDE/administrator/index.cfm Firefox can't establish a connection to the server at 127.0.0.1:8500. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. • I cleared the browsing “History” from both IE and FF. • I have restarted the CF server in the Control Panel Administrative Tools Services • Even restarted the IIS Getting the same error. Further I was trying to access IE/FF via CFbuilder But still I am getting the error “The connection was refused when attempting to contact [URL].” My inetpub is in the D rive where as CF8 is in C drive Also when i check IIS-5 Control Panel Admin tools Services I do not find the Localhost under web sites or FTP sites. Kindly help me with a fix.

  Read the article

• How to start MSSQL Server with corrupt model db

  - by Jordan McGuigan

  After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

  Read the article

• Encrypted Windows 7 & Linux Advice Wanted

  - by Miles

  I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

  Read the article

• saving and searching encrypted mail

  - by user53616

  I often send and receive gpg-encrypted mail. At the moment I use thunderbird + enigmail (in linux) to do that. As far as I know there is no way in thunderbird to find all encrypted messages which bodies contain particular keywords. There also seems to be no option to save encrypted mails decrypted (so they would be searchable). However for me it is important to be able to search old encrypted mails. So my question is: Is there a way in linux to save incoming mails automatically decrypted in my inbox and save outgoing encrypted mail decrypted in the send folder? Both times adding a line to the body which remarks that the mail was encrypted. It could be another email client for linux that could to that or perhaps a solution using procmail or maildrop. For a procmail solution I guess there could be some problems with encoding (perhaps one have to use emil?). Note that the solution should work for multipart encrypted messages (including encrypted attachments) too. Further note that I don't want a discussion about security holes. For me it's ok if messages are stored decrypted on my harddrive (which is encrypted as a whole anyway). In doubt for a first solution it would be ok to store my private key passphrase in cleartext on my harddrive, too. The point is that the mails are encrypted on the mailserver or more generally on their "way through the net".

  Read the article

• Can't detect hard drive on Macbook Pro

  - by MartinMoizard

  I changed a few month ago the config of my Macbook Pro with the following: I bought a SSD hard drive I removed the hard drive of my Mac book Pro and installed there my brand new SSD Then I removed my DVD drive and installed my hold hard drive instead with a caddy Everything was working great until today when I couldn't access anymore to my old hard drive because it is not detected anymore. Sometimes Mac OSX is mounting it but it takes like 15 min to browse a simple folder. I opened my laptop to have a look at the problem. It seemed like the optical drive connector was not plugged correctly to the motherboard (that connector: http://cl.ly/2T0X2e1j0J1g47061d1t). So I plugged it correctly and reboot. It didn't fix my problem. Then I tried to put my SSD in the caddy and to boot: no hard drive was detected. So I guess there is something wrong either with the caddy, either with the optical drive connector, or either with the plug that is on the motherboard. So my question is, how can I know where the problem comes from?

  Read the article

• Hybrid Exchange Online setup with on premise public folders, certificate issues?

  - by exxoid

  We have a Hybrid Exchange setup with Exchange Online (v15 tenant) and Exchange 2010 on premise. The hybrid configuration for the most part is working, what I am having an issue with is getting public folders to work for cloud users. I followed the official documentation here (http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx) and it kind of works. When I am accessing Outlook on a public wifi I am able to bring up the cloud mailboxes and on premise public folders show up in Outlook. When I am accessing email via Outlook as a cloud user on the same LAN as the on premise exchange, the cloud user makes the outlook.com connection for live/ad/archive mailbox but fails to create a proxy connection for the on premise public folders. The error I get is a certificate mismatch, it seems that when a user on the LAN accesses Outlook/Exchange it is using a different certificate vs. when Outlook is launched on a WiFi network. When I look at the Outlook connection information, I see the connection to outlook.com for ad/live/archive mailbox but no entry for public folder connection. Our on premise Exchange is 2010 SP3 with latest CUs. The client is a domain joined laptop with Windows 7 and Office 2010 SP2, latest windows updates applied. Our infrastructure has a working ADFS 3 and DirSync setup for Office 365. My question then is, what do I need to do to make sure that the Cloud user launching Outlook on the LAN uses the proper certificate (the wildcard 3rd party cert.. vs. the self signed certificate which it looks like it may be using during the connection attempt).

  Read the article

• Setup ejabberd with SQL Server 2008

  - by wonster

  Here's what I have got so far. Windows 2008 Server 64 bit. Installed the latest version of ejabberd, ejabberd-2.1.8-windows-installer.exe. The windows service starts up fine but seems ineffective. However, using the start & stop scripts work. I am able to login to the admin page which so far doesn't seem that versatile. Opened up ports 5222, 5226 and 5280 for my workstation to talk to the server. I've got Spark and Jabbear Windows clients to register, login and instant message with multiple accounts using the server. After confirming that I've got the very basics working, I've decided to make use of SQL Server 2008 as the database. Reason? Mainly, I am very comfortable with SQL Server. I can deal with redundancy, failover, data analysis easily. Not sure if ejabberd's built in DB provides all that. Following the instructions from ejabberd's documentation, I setup a system DSN that points to another physical database. The DSN checks out fine. (Tried both Named Pipes and TCP/IP) Modified ejabberd.cfg. Commented line %%{auth_method, internal} and uncommented line {auth_method, odbc} Uncommented and modified {odbc_server, "DSN=ejabberd;UID=somelogin;PWD=somepassword"}. After making these changes, I restarted. No errors are found in the log files. The jabber clients are no longer able to register new accounts. I'm not sure where to look for errors besides the /logs/ folder as I'm new to all this. I am basically stuck here on step 5. Has anyone got this setup to work recently? Some of the posts I've found around are years old and of no help. I can't be the only one setting up ejabberd with MS SQL. Any help would be appreciated!

  Read the article

• Windows 7 mouse multi selection on windows explorer with CTRL and point to select / single click to open

  - by bortao

  This is something that have annoyed me since i changed to Windows 7. I don't do double click for a long time now since windows introduced 1 click selection (Folder Options Click items as follows Single click to open an item). The problem is, when i click Control and hover over the items, they select/deselect automatically every small amount of mouse movement i make. What i want is to select/deselect the items only when i enter/exit them. So to deselect an item im hovering, i have to move the mouse out of it, and then back in. I'm using Intellimouse Explorer official drivers. (edit) Here's another related annoyance: When you are hovering something and move the mouse inside other item (Holding Ctrl) The new item may or may not be selected. If you continue moving the mouse it gets selected/deselected as you move. (more edit) I have found that the parameter HKCU\Control Panel\Mouse\MouseHoverHeight / MouseHoverWidth have some influence here. If it's set to 2, the item select/deselect really quickly as you move the mouse. When set to larger numbers, its slower. But setting to 20 or 200 don't seem to be much different.

  Read the article

• Trying to Set up SMTP Server on WIndows Server 2012

  - by datc

  I'm working on a website, and I need to test the functionality of sending email messages from ASP.NET, something like this: Dim msg As New MailMessage("email1", "email2") msg.Subject = "Subject"<br> msg.IsBodyHtml = True<br> msg.Body = "Click <a href='site'>here</a>." Dim client As SmtpClient = New SmtpClient() client.Host = "My-Server"<br> client.Port = 25<br> client.DeliveryMethod = SmtpDeliveryMethod.Network<br> client.Send(msg) This is running from a Windows 8 workstation. I've installed SMTP server on my Windows Server 2012 machine. The mail shows up in the mailroot/Queue folder and sits there, eventually getting deposited into Badmail. Now I have AT&T U-verse at home, and a few devices connected to the gateway, including let's call it "My-Server." When I run SmtpDiag from say, datc@... to [email protected] I get SOA serial number match passed, Local DNS (99-135-60-233.lightspeed.bcvloh.sbcglobal.net) & Remote DNS (hotmail.com) tests *not* passed, and ultimately, Connecting to the server failed. Error: 10060. Failed to submit mail to mx2.hotmail.com error. When I set My-Server's IP to static and equal to the external IP, 99.135.60.233, and again run SmtpDiag, I get SOA, Local DNS, and Remote DNS tests passed, but the same 10060 error. Same for yahoo.com, gmail.com, and so forth. Is it my ISP's job to fix this? Some PTR record missing somewhere? Is it at all possible to have a home-based SMTP server? All I want is to test my email code. Perhaps, my IP address is just not "trusted" somehow. Thanks.

  Read the article

• What do Windows 8 Refresh and Reset my PC really do?

  - by Jerry Nixon

  In Windows 8 I can reset everything and reinstall Windows. I assume this will clear my drive and start from scratch? Is that right? Does this create a Windows.old folder? I see this dialog, but aren't my settings and preferences saved in the cloud? If I screw up my settings and reset like this, are my settings also refreshed back to defaults? Since I use SkyDrive to sync my files, my personal files are safe, right? Also, in Windows 8 I can refresh my PC without affecting files. Are my desktop and/or Windows store apps uninstalled when I refresh my PC? I see this dialog, but I still am not sure. For example, when it says apps are "kept" does that mean I don't have to buy them again or are they installed after the refresh is over for me? I assume "from disk" means desktop apps? Or maybe corp apps? What would motivate a user to choose between these two?

  Read the article

• Can't run utilities/.exe's that use the network from a [DFS] windows share on Windows 2008 servers. Can this be overcome?

  - by Jim Lawhon

  Under Windows Server 2008 I'm unable to run many utilities that use network resources. This works just fine under Windows Server 2003. For example: \\domain\dfs\tools$\bin\sendmail.exe ... \\domain\dfs\tools$\bin\psexec.exe ... echo %_metric% %_value% %_unixtime% | \\domain\dfs\bin\foo$\nc graphite.domain 2003 -w1 Reproducing and maintaining this folder on a large number of servers/vm's is not desirable. Is there a way to allow Windows Server 2008 to run these tools? If so, can this be enabled via GPO or in a fashion that can be scripted during automated builds? Edit: The commands/tools do work just fine, when run from local drives. Edit2: Wget example: d:\scripts\helpers>z:\bin\wget http://www.google.com SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = z:/etc/wgetrc --2011-04-11 00:32:15-- http://www.google.com/ Resolving www.google.com... failed: Host not found. z:\bin\wget: unable to resolve host address `www.google.com' wget can neither use DNS to resolve the IP nor can it use HTTP if provided an IP directly. Edit3: The problem seems to be tied to DFS/DFS shares. Tools run correctly from other normal windows-server file-shares. They also run correctly when run directly from the file-servers behind the DFS. They only fail when we attempt to run them from the DFS UNC path or mapped drives.

  Read the article

• Whats the best cloud backup solution for a small scale server environment?

  - by nbv4

  I have a server that runs a postgres database that contains about 200MB of data. Currently I have a cron job setup on my home computer which: ssh's into my server runs a remote script which makes a backup of the database scp's that dump over to my local hard drive for storage. Each dump is 20MiB. does this every six hours (one months of backups is roughly 2GiB) The problem with this setup is that if my local machine goes down for whatever reason, no backups will be made. Also, I can't have the cron run from the server, because I can't have it scp'd to my local machine from my server (firewalls and all that crap). My local machine is running Ubuntu 10.04, and my server is Ubuntu 9.10 server edition. I looked into Ubuntu One, but currently it's gui-only. I also looked into dropbox, but it's a pain in the ass to get setup in linux without gui support. Amazon S3 looks good but it's not free (yet dirt cheap). Is there any other alternative that I should look into? I'd prefer something where I can just have my script dump the database into a directory, and have the backup service 'watch' that folder and sync accordingly. I can maybe also have my local machine sync to the cloud backup so I have even more redundancy, plus easy access to my backups for use in testing. Edit: My server is a VPS, so what solution I end up using has to be 100% software based.

  Read the article

• Is there any method of backing up Google Drive files in some sort of versioning system?

  - by VictorKilo

  Backstory My company is utilizing Google Drive for our shared files. Each user has their own Drive account. In addition, we have a corporate Drive account which holds documents which are shared to each user. Each folder is shared to different users depending on their permissions and positions in the company. Many users are able to add files, and updated folders within this shared Drive account. This is fine. What is not fine, is when someone deletes something that they shouldn't. I have little to no way of knowing when I file is deleted wrongfully. Furthermore, anything that gets deleted goes into the trash bin of the file's creator, so I can't just restore it from the trash. Question Is there any method of backing up Google Drive files in some sort of versioning system that would allow me to revert files back to defined points in time? What i have Tried I currently have this corporate drive account synced up to my personal computer through the Google Drive application. Each night, I run a backup on the file using Windows "Backup and Restore." This allows me to at least get back files that are lost, but I a cleaner method than this. It's very possible that I may not have the very latest version of a document on my computer when the utility runs.

  Read the article

• Fixed ruby/mysql connection with new libmysql.dll, and broke Apache in the process

  - by jmtoporek

  Ok so bit of background - all my development has been on a local Windows 7 machine. I had Apache with PHP/MySQL running with no issues. Been using ruby (1.9.3 and latest rails release 3.2.9) with built in webrick server, but had a devil of a time connecting to mysql. Did some research, updated my libmysql.dll file in c:/ruby/bin and it worked! Very happy... except now Apache stopped working. In my attempt to resolve the issue I found an older copy of libmysql.dll, renamed the new file, copied the old file back to c:ruby/bin and apache works, ruby does not. So I can take this ass backwards approach but obviously this seems pretty stupid. I was surprised that Apache was using the dll file in ruby/bin folder. I presume this is related to path variables perhaps? I guess I was hoping someone could direct me as to how I can use one dll file for apache and another for ruby. Or if you have some other smarter approach - I've smart enough to follow directions to install apache from scratch and enable php on windows as well as ubuntu, but I'm not much of a sys admin, just a semi competent web developer.

  Read the article

• Windows mounted network drives slow after upgrading switch

  - by Kver

  On our small business network our old 10/100 consumer grade switch gave up the ghost, and we replaced it with a proper business-grade gigabyte switch. After wiring it in our Linux and Mac users immediately got back to working off of network drives; But 2 of our 3 Windows 7 PCs have suddenly experienced a tremendous slowdown with mapped network drives; Windows will become stuck "discovering" a folder causing applications to freeze when trying to open files. It will instantly display and browse files, but the moment you try to open one the bug hits. To remedy this we have our users copying files to the desktop, but it can take a few minutes while windows is stuck "calculating" the time it will take to copy. These aren't big files, mostly excel sheets less than 500KB - these operations are instant on Linux and Mac. (The third Windows machine is having no issues) I've tried remapping the drives, mapping to different drive letters, rebooting, etc. I'm at a loss, because switches are mostly transparent, and it's only after the switch was replaced that the Windows PCs started acting up. What black-magic voodoo am I missing to make Windows work? Thank you.

  Read the article

• Certificates in SQL Server 2008

  - by Brandi

  I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

  Read the article

• Outlook Calendar Attachments to have limited access to just Required attendees

  - by Jason Pearce

  The management team at my company often attaches documents (Word, Excel, PDFs) to their Outlook Calendar meeting requests. The meeting requests are sent to the managers, but also to their assistants. The desire is to have everyone be able to view the full meeting request and its content, but limit the ability to open the attachments to just the managers. Is there a way in Outlook 2003 and/or 2007 to limit access to attachments that accompany meeting requests? Ideally, can access to the attachments be controlled by the "Select Attendees and Resources" window when selecting individuals from the Global Address List. Can those in the Required field have access to the attachments while those in the Optional or Resources fields not have access? My suggestion was to simply place all meeting attachments in a shared network folder that has read/write access limited to managers. They would then just place fully qualified links to those files in the body of the Meeting Request. While everyone would receive and see the links, only a few would have access. This, however, wasn't easy enough for them, so I'm looking for some other ideas.

  Read the article

• Why does my simple Raid 1 backup storage perform really slow sometimes?

  - by randomguy

  I bought 2x Samsung F3 EcoGreen 2TB hard disks to make a backup storage. I put them in Raid 1 (mirror) mode. Made a single partition and formatted it to NTFS, running Windows 7. For some reason, accessing the drive's contents (simply by navigating folders) is sometimes really slow. Like opening D:/photos/ can sometimes take several seconds before it starts showing any of the folder's contents. Same applies for other folders. What could be causing this and what could I do to improve the performance? I remember that there was an option somewhere inside Windows to choose fast access but less reliable persistence operations (read/write). It was a tick inside some dialog. At the time, it felt like a good idea to take the tick away from the option and get more reliable persistence but slower access, but now I'm regretting. I'm unable to find this dialog.. I've looked hard. I don't know, if it would make any difference. Oh, and I've ran scan disk and defrag on the drive. No errors and speed isn't improved.

  Read the article

• windows xp cannot access admin share

  - by barlop

  I have 3 systems. A,B,Compx all on xp. but comps A and B have an issue with Compx. Compx has network shares I can access. I can do \\compx and get some. But I cannot access the admin share c$ \\compx\c$ gives a login prompt, and I can't get any user/pass to work. I looked at permissions but don't see an issue. Nevertheless, I will describe what I see in the permissions. In the security tab of C, I have Administrators,creator owner,everyone,bob,system,users (6 things there) "creator owner" has nothing ticked, I can't seem to change that. If I tick so they all get ticked, and click apply, 2.5min and it's completed its opration and they all untick. Though this isn't the root of the problem. Since I get the same in the share I can access. In advanced, I see those 6 things, Administrators,creator owner,everyone,bob,system,users (6 things there) all "full control" all are "this folder, subfolders and files".. except creator owner, which is just subfolders and files only I look at the properties for the share I can see. looks the same, except in security..advanced, double clicking any of them the boxes are all ticked but greyed. That's not the problem though since I can access that share. So, I don't know what the problem is.

  Read the article

• How to perform this Windows 7 permissions change on many files via GUI or command line

  - by hippietrail

  After using my external hard drive on another Windows 7 computer to tweak photos with Windows Live Photo Gallery then upload them to Facebook I found the modified images were now not visible on the original Windows 7 computer. I'm not sure if the things I tried to get it working subsequently changed anything, but I do know this is the sequence of actions that makes the permissions of the modified files match those of the unmodified files: Right click on broken image file, select "Properties" On the "Security" tab press the "Advanced" button In the "Permissions" tab press the "Continue" button with the shield icon on it Tick the box marked "Include inheritable permissions from this object's parent Click the "Remove" button to remove the only current entry "Type: Allow, Name: Administrators (XYZ\Administrators), Permission: Full control, Inherited From: OK on the "Permissions" tab. OK on the "Security" tab. Now this same procedure does not work at the folder level. It results in "access denied" dialogs. I'm looking for some way to perform this exact modification on all the images I edited on the other computer. I'm happy to use the Windows GUI in Explorer or any other included tools. I'm happy to use the Windows command line. I'd prefer not to use a third-party tool since I'd have to be satisfied it's not doing anything else. I'm not looking for a different way to change permissions to other settings to make an external drive full of photos editable on multiple computers. At least not in this question.

  Read the article

• mod_rewrite changes case even if not matching RewriteCond?

  - by kirdie

  I have a really strange problem with my MediaWiki which I want to have articles of the form mywiki.org/MyArticle. Now I got most of it to work using the following code but it mysteriously cannot display the logo anymore. RewriteEngine On # don't rewrite valid requests to files and directories RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-f RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-d # mywiki.org/MyArticle gets rewritten to mywiki.org/index.php/MyArticle RewriteRule ^/(.*)$ /index.php/$1 [L,QSA] Now when I type in mywiki.org/img/logo.jpg in my browser the adress changes to http://wiki.geoknow.eu/Img/logo.jpg (capital I) and I get to the empty article page but the image is definitely there (in my document root under the img folder): /var/www/mywiki.org$ ls img logo.jpg So far so bad. But now it gets really crazy: When I add RewriteCond %{REQUEST_URI} !^/.*\.jpg my adress still gets rewritten and my access log says - - [05/Dec/2012:16:30:21 +0100] "GET /Img/geoknow_logo.jpg HTTP/1.1" 404 509 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/17.0 Firefox/17.0" Where does that capital I in Img come from? The rule is not even executed because at least one condition is definitely not met now and I also don't have any to lowercase-transformation defined anywhere. What is happening there and how can I repair this? P.S.: Now all of the sudden the problem went away (the image is displayed as it should and there is no capital replacement anymore. What can cause this and why does it spontanously appear and disappear?

  Read the article

• Can't do anything with Ext. HDD, ".Trashes" is probably the boogyman. (On a MAC!)

  - by Sander Schaeffer

  I bought a external Harddrive today, A Samsung. But I'm not able to do anything with it A few notes on that. I can't put anything on the harddrive. It keeps on 'preparing copying files' I can delete anything on the harddrive system files, except the folder ".Trashes". It gives error 'Unexpected error: -50' I've tried to empty my own trashcan, no changes. I've set the file permission on the .Trashes to read/write everyone, doesn;t change a thing Trying to format the whole drive with DiskUtility, but quits at start, because the drive cannot be deactivated I've tried a few terminal commands sudo -s -r rf /Volumes/Untitled\ 1/.Trashes - Directory not empty -r rf /Volumes/Untitled\ 1/.Trashes - no permissions Also cd /Volumes ls -al cd name_of_partition ls -al -rm -rf .Trashes Again: Permission error. Also: I can't change drive permissions via Disk Utility, via the button 'recover drive permissions', because it is 'blank' I really can't figure out how to delete .Trashes, format the drive or get the damn thing working. Any suggestions? p.s. If this is the wrong Stack Exchange site: Please redirect me!

  Read the article

• retain last used path to location for saving files in Windows 7

  - by Mark Miller

  I am using Microsoft Office 2010 and Windows 7 on a Dell PC. I am opening a bunch of MSWord files one at a time, copying data tables therein, pasting the data into Excel and saving the Excel files as comma delimited text files. I am creating a separate Excel file for each MSWord file. The path to the folder containing the saved comma-delimited files is quite long, something like this: c:\users\me\aa\bb\cc\dd\ee\ Every time I open Excel and save a new comma-delimited file I have to re-navigate the entire path (c:\users\me\aa\bb\cc\dd\ee). In the past Windows seemed to remember the last used path, saving a lot of tedious key-strokes. In fact, I think Windows did this for me as recently as last week, albeit on a different computer. Can I apply a setting in Windows somewhere asking it to offer the last used path as a default when saving files so I do not have to re-navigate the entire directory structure to save each new comma-delimited file? If I can, how so? Where is the option for specifying that setting? Thank you for any help.

  Read the article

• REMOTE_USER not getting set?

  - by landed

  I am trying to setup LDAP Authentication in Joomla using a plugin called JMapMyLDAP (in fact 4 plugins each doing a different job). I need to pull a part of a string out of the server variable REMOTE_USER and this should be visible (we see here http://timplummer.com.au/4-how-to-integrate-joomla-3-with-active-directory-using-ldap.html) in phpinfo(); The issue is that REMOTE_USER is not set or at least not appearing. A few things to note (if you don't mind) here- conceptually I am not really understanding authentication as a whole subject it appears to be vast despite my years working in websites. Yes I used asp and built php pages to check a user is who they say they are with a token(/session?) that was given to just them and then they are identified when a stateless request is made to the server. Thats my level of understanding. This sounds different to the basic authentication in apache where a password sits in a file and a username and the user needs to login to a basic form to get access to the folder/docs this is via an .htaccess file. Ok so with the LDAP to work I need to get REMOTE_USER this sounds very reasonable as how else do we know is making the request. Thank you.

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >