Search Results

Search found 14739 results on 590 pages for 'mssql 2008'.

Page 508/590 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• Connect to Nonencrypted Wireless Network Using Ubuntu Commands

  - by Tim

  I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

  Read the article

• IIS replication - Is it possible

  - by Ian

  Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

  Read the article

• Splunk is fantastically expensive: What are the alternatives?

  - by samsmith

  This has been discussed, but it has been several months, so it may be time to revisit it: Earlier discussion RE Splunk alternatives For the record, Splunk rocks. But the pricing is simply beyond what we can consider (When I spoke with Splunk today, the cost for a system to index 5gb/day of data is over $30,000.) That is more than we spend on SQL Server (by a large multiple), more than we spend on a rack of servers (by a multiple), etc. etc. The splunk sales team is correct (that for $30K we get more value and functionality than if we spend the same building our own system), but it doesn't matter. The splunk cost is simply too high (by a multiple). Soooooo, we are looking around! Is anyone out there building a splunk like system? Our basic need: Able to listen for syslog messages on multiple udp ports Able to index the incoming data in an async way Some kind of search engine Some kind of UI An API to the search engine (to embed in our console) We currently need to index 3-5gb/day, but need to be able to scale to 10gb/day or more. We do not need a lot of history (30 days is fine). We use Windows 2008 and 2003 servers. Thanks for your thoughts!

  Read the article

• Kindly guide me to buy a new laptop [on hold]

  - by Its me 007

  I am from India. I want to buy a new laptop. Shortlisted few but confused between which processor,Chip set and Graphics will be the best suited for my requirements. NOTE: NOT ABLE TO POST THE LINKS YOU WILL HAVE TO COPY PASTE IT. SORRY. 1) HP Pavilion 15-N004TX - 4th Gen CI5 - 4200U/4GB RAM/500 GB HDD/ 1GB Radeon Graphic - Rs 39990 www.homeshop18.com/hp-pavilion-15-n004tx-laptop-4th-gen-intel-core-i5-4200u-4gb-500gb-15-6-linux-silver-black/computers-tablets/laptops/product:30989197/cid:16317/ 2) Lenovo Essential G510 (59-398452) - 4th Gen Ci5 4200M/ 4GB/ 500 GB/Win8/2GB Graph ATI Sunpro 8570 - Rs 44969 www.flipkart.com/lenovo-essential-g510-59-398452-laptop-4th-gen-ci5-4gb-500gb-win8-2gb-graph/p/itmdp26eprwf5k5v?gclid=CMnh99GA2LoCFaRU4godNiUAGQ&semcmpid=sem_7847244212_laptopsnew_goog&tgi=sem%2C1%2CG%2C7847244212%2Cg%2Csearch%2C%2C24387103114%2C1t1%2Cb%2C%2Blenovo+%2Bg510%2F59+%2B398452%2Cc%2C%2C%2C%2C%2C%2C%2C2 3) HP Pavilion G6-2303TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 500GB/ DOS/ 1GB Graph) - Rs 40500 www.flipkart.com/hp-pavilion-g6-2303tx-laptop-3rd-gen-ci5-4gb-500gb-dos-1gb-graph/p/itmdm6yzh4gr4cxd?pid=COMDM6YHWMGDRDEZ&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 4) HP Pavilion 15-E039TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 1TB/ Win8/ 2GB Graph) - Rs 46690 www.flipkart.com/hp-pavilion-15-e039tx-laptop-3rd-gen-ci5-4gb-1tb-win8-2gb-graph/p/itmdn4d9wykhdcpz?pid=COMDN4CZGFMGJNTN&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 Now I am confused between: Which Processor and chipset is best? How much graphic card is enough? (Not a gamer) Is any of this laptop future proof i.e. it should at least support upcoming latest programming softwares which eats more processor and memory. Laptop will be mainly used for multiprocessing.It should be at least capable for following: Visual Studio 2012 and the upcoming versions for at least 4 years SQL server 2008 R2 and above Sharepoint Blend Photoshop Kindly suggest. If anyone know any good laptop with good configuration in the 50k budget kindly suggest. Thanks in advance.

  Read the article

• Microsoft Licensing Scenario/Questions [closed]

  - by user17455

  Possible Duplicate: Can you help me with my software licensing question? I am a member of a team developing a third party application (APP) that listens for and services connections from remote devices via TCP. Also, some of these remote devices allow 1 or more users to interact with the remote device. On some of the remote devices, it is impossible for a user to interact with the device. The user/remote device makes no use of any Windows Server service - not DHCP, not IIS, not File Server, not Print Serer, not AD. The remote device's only connection to the Windows Server machine is through the APP's TCP ports. Our company has no interaction with Microsoft. We do not have a Microsoft sales team. Past inquiries have determined that it is cheaper for us to buy Microsoft software (and CALs) retail than to enter into any kind of "arrangement" with Microsoft. I have many questions about SQL Server CALs and Windows Server 2008 CALs. How can I obtain authoritative/legally binding answers? I am not looking for FREE legal advice. I AM looking for FREE advice about who/what/where I can responsibly spend my money to get meaningful information. I fear that passing this on to the local company law firm will just mean that I will be paying them to educate themselves on Microsoft licensing. And if that's like writing code to a new Microsoft API - they are not going to get it right the first time. Going to Microsoft for answers sounds like swimming up to a hungry shark and asking "One leg or two?" I am hoping someone has been down this road before and knows a law firm/lawyer that is experienced in these matters. Any help/suggestion welcome. Thanks.

  Read the article

• Allowing non-admin users to unstick the print spooler

  - by Reafidy

  I currently have an issue where the print que is getting stuck on a central print server (windows server 2008). Using the "Clear all documents" function does not clear it and gets stuck too. I need non-admin users to be able to clear the print cue from there work stations. I have tried using the following winforms program which I created and allows a user to stop the print spooler, delete printer files in the "C:\Windows\System32\spool\PRINTERS folder" and then start the print spooler but this functionality requires the program to be runs as an administrator, how can I allow my normal users to execute this program without giving them admin privileges? Or is there another way I can allow normal user to clear the print que on the server? Imports System.ServiceProcess Public Class Form1 Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click ClearJammedPrinter() End Sub Public Sub ClearJammedPrinter() Dim tspTimeOut As TimeSpan = New TimeSpan(0, 0, 5) Dim controllerStatus As ServiceControllerStatus = ServiceController1.Status Try If ServiceController1.Status <> ServiceProcess.ServiceControllerStatus.Stopped Then ServiceController1.Stop() End If Try ServiceController1.WaitForStatus(ServiceProcess.ServiceControllerStatus.Stopped, tspTimeOut) Catch Throw New Exception("The controller could not be stopped") End Try Dim strSpoolerFolder As String = "C:\Windows\System32\spool\PRINTERS" Dim s As String For Each s In System.IO.Directory.GetFiles(strSpoolerFolder) System.IO.File.Delete(s) Next s Catch ex As Exception MsgBox(ex.Message) Finally Try Select Case controllerStatus Case ServiceControllerStatus.Running If ServiceController1.Status <> ServiceControllerStatus.Running Then ServiceController1.Start() Case ServiceControllerStatus.Stopped If ServiceController1.Status <> ServiceControllerStatus.Stopped Then ServiceController1.Stop() End Select ServiceController1.WaitForStatus(controllerStatus, tspTimeOut) Catch MsgBox(String.Format("{0}{1}", "The print spooler service could not be returned to its original setting and is currently: ", ServiceController1.Status)) End Try End Try End Sub End Class

  Read the article

• DPMS does not work: the monitor is not switched off

  - by bortzmeyer

  I have a monitor which was properly switched off by my Debian PC when unused. I attached it to another machine and, this times, it is never switched off. In /etc/X11/xorg.conf, I have: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" It is recognized when X11 starts: (II) Loading extension DPMS ... (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (**) Option "dpms" (**) VESA(0): DPMS enabled The operating system is Debian stable "lenny". The graphics card is: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrate d Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fe900000 (32-bit, non-prefetchable) [size=512K] I/O ports at b080 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-Capabilities: [d0] Power Management version 2 X11 is: X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux ludwigVII 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:3 8 UTC 2009 i686 Build Date: 08 June 2009 09:12:57AM

  Read the article

• Hyper-V vss-writer not making current copies

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• MS Excel 2010 - Using DSN + 32 bit drivers

  - by Kristiaan

  I need some advice as im running into a problem and so far i have been unable to find a solution. We have a set of reports developed in MS Excel that use DSN file to connect to data sources to retrieve data, these work fine on 32 / 64bit systems, however we are moving to a terminal server environment using windows 2008 R2 64Bit. The reports fail to run using the DSN's within this environment if we only have the 32bit drivers installed and configured in the ODBC settings, the minute we install the 64Bit drivers the software works. Is there a way / Method of getting Excel or the DSN file to NOT use the 64Bit driver, but force it to use the 32bit driver. ANSWERED - But due to low user score i cannot "answer" my own question... Sadly there is no way to-do what i want to-do, without a lot of very nasty and not 100% perfect reg hacks. If you need to access 32bit ODBC data sources the application in question has to be 32Bit. here is a link to just one forum post i found relating to this type of problem, it appears the only way i would be able to accomplish this is to remove the 64bit version of office and install the 32bit version instead of it. http://social.msdn.microsoft.com/Forums/en-US/accessdev/thread/5108f337-f06a-4518-afe3-d3c1abd040ef/

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

• Connect to WEP Wireless Network by command line on Ubuntu

  - by Tim

  Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• IIS 7.5 truncating POST body containing JSON data with ASP.NET MVC 3

  - by Guneet Sahai

  I'm facing a problem which I hope is a configuration thing with IIS but is right now giving a lot of trouble. Basically I have a controller that accepts a JSON and does some processing. While it generally works fine, but every now and then when the system has some load I get an error. After some painful debugging, we figured the incoming JSON gets truncated which causes the deserialzer to fail. To narrow down the problem - we wrote a simple controller that accepts a JSON and tries to deserialize it. In case it fails it just logs it. This works fine but when I hit it using a load testing tool (JMeter) it throws the same error (truncation) for a few requests. The # of failures increased when I increase parallel connections. It starts showing with 150 concurrent requests. We are running IIS 7 on windows 2008 server with ASP.Net MVC 3 with more or less default configuration of IIS. More information available in my question below http://stackoverflow.com/questions/12662282/content-length-of-http-request-body-size

  Read the article

• Remote Desktop Zooming

  - by codeulike

  Using Remote Desktop from a device with a hi-res screen (say, a Surface Pro) is decidedly tricky - as everything displays 1:1 scale and so looks tiny. If the machine you are remoting into runs Server 2008 R2 or later, you can change the dpi zooming setting (see here). But for older hosts, that doesn't work. Using normal Remote Desktop, you can connect with a lower resolution, say 1280x768, and turn on smart-sizing. However smart-sizing can scale down (to display a huge desktop in a small area) but does not seem to scale up (to display a small desktop in a big area). Using the Windows 8 Remote Desktop App, you can zoom - but you cannot set the default resolution of the host. What I want is a lower resolution in the host, scaled up to fit my screen. So both of those are close to what I want, but dont quite work. So question is: Does the Remote Desktop App allow screen resolution to be set somehow? Is there some other Remote Desktop client that can handle zooming better?

  Read the article

• I deployed Flash Player via a Software Installation policy. How to upgrade?

  - by eleven81

  I have a Windows Server 2008 machine as my DC. Earlier this year I created a Software Installation GPO to deploy Adobe Flash Player plugin MSI. I assigned the policy to the computers, about half run Windows XP x86 and the other half Windows 7 x64. That all works like clockwork. When I created the Software Installation Policy, I disabled the Flash Player plugin's automatic update feature by editing the MSI in Orca. I did this because I wanted all of my machines to run the exact same version of the plugin. Now, some time has passed and a newer version of the Flash Player plugin has been released. It is time for me to push out the updated version of the plugin. I already have the new MSI, but I am lost on what to do next. I see the upgrades tab in the Software Installation GPO, but everything there reads like that would be used for add-ons to a larger master program and not for updates that are released over time. I have read that it is best to create a new Software Installation policy with the new MSI, revoke the old GPO, and assign the new GPO. I feel as though, over time, I will wind up with more revoked policies than active ones. I have also read that some people have had success by replacing the old MSI with the new MSI and simply telling the GPO to redeploy. This seems like a backdoor method that will only get me in to trouble. In short, what is the correct, best-practice, or preferred way to roll out the new version via Group Policy?

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• Postgres pgpass windows - not working

  - by Scott

  DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

• Method to integrate Powershell scripts with non-Windows workflow?

  - by Matt Simmons

  I love the smell of new machines in the morning. I'm automating a machine creation workflow that involves several separate systems across my infrastructure, some of which involve 15 year old perl scripts on Solaris hosts, PXE Booting Linux systems, and Powershell on Windows Server 2008. I can script each of the individual parts, and integrating the Linux and Unix automation is fairly straightforward, but I'm at a loss as to how to reliably tie together the Powershell scripts to the rest of the processes. I would prefer if the process began on a Linux host, since I imagine that it will end up as a web application living on an Apache server, but if it needs to begin on Windows, I am hesitantly okay with that. I would ideally like something along the lines of psexec for Linux to run against Windows, but the answer in that direction appears to by Cygwin, and as much as I appreciate all of the hard work that they put in, it has never felt right, if you know what I mean. It's great for a desktop and gives a lot of functionality, but I feel like Windows servers should be treated like Windows servers and not bastardized Unix machines (which, incidentally, is my argument against OSX servers, too, and they're actually Unix). Anyway, I don't want to go with Cygwin unless that's the last and only option. So I guess what I'm asking is if there is a way to execute jobs on Windows machines from Linux. Without Cygwin. I'm open to ideas and suggestions, including "Look idiot, everyone uses Cygwin, so suck it up and deal with it". Thanks in advance!

  Read the article

• Nginx proxy to IIS Connection Timeout

  - by MitMaro

  I am having an issue with random timeouts with a Nginx proxy connecting to an IIS machine. I have been watching a packet capture between the two servers and it seems that the IIS machine is receiving a SYN packet but is not responding with what I think should be an ACK response. Before the timeout occurs there seems to be a slower response from the IIS server. There is no unusual memory or processor usage on the IIS or Nginx machine. Some information on the servers and setup: Nginx Machine: Ubuntu 10.04 64bit Nginx 0.7.65 Amazon EC2 Windows Machine: Windows Server 2008 IIS 7 ASP.net Application in Integrated Mode Nginx Error: 2011/01/10 17:57:40 [error] 8297#0: *30 connect() failed (110: Connection timed out) while connecting to upstream, client: 209.***.***.***, server: secure.example.com, request: "GET /a/path/deliver.aspx HTTP/1.1", upstream: "http://***.***.***.****:****//another/path/deliver.aspx", host: "secure.example.com" WireShark Packets 6521.449528 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422103 TSER=0 WS=7 6524.443239 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422403 TSER=0 WS=7 6530.443241 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477423003 TSER=0 WS=7

  Read the article

• Problems installing Windows service via Group Policy in a domain

  - by CraneStyle

  I'm reasonably new to Group Policy administration and I'm trying to deploy an MSI installer via Active Directory to install a service. In reality, I'm a software developer trying to test how my service will be installed in a domain environment. My test environment: Server 2003 Domain Controller About 10 machines (between XP SP3, and server 2008) all joined to my domain. No real other setup, or active directory configuration has been done apart from things like getting DNS right. I suspect that I may be missing a step in Group Policy that says I need to grant an explicit permission somewhere, but I have no idea where that might be or what it will say. What I've done: I followed the documentation from Microsoft in How to Deploy Software via Group Policy, so I believe all those steps are correct (I used the UNC path, verified NTFS permissions, I have verified the computers and users are members of groups that are assigned to receive the policy etc). If I deploy the software via the Computer Configuration, when I reboot the target machine I get the following: When the computer starts up it logs Event ID 108, and says "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was: An operations error occurred." There are no previous log entries to check, which is weird because if it ever actually tried to invoke the windows installer it should log any sort of failure of my application's installer. If I open a command prompt and manually run: msiexec /qb /i \\[host]\[share]\installer.msi It installs the service just fine. If I deploy the software via the User Configuration, when I log that user in the Event Log says that software changes were applied successfully, but my service isn't installed. However, when deployed via the User configuration even though it's not installed when I go to Control Panel - Add/Remove Programs and click on Add New Programs my service installer is being advertised and I can install/remove it from there. (this does not happen when it's assigned to computers) Hopefully that wall of text was enough information to get me going, thanks all for the help.

  Read the article

• Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a ne

  - by TrevJen

  Sharepoint 2007 MOSS with AD imported users. All servers are 2008. I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. I am at a loss on how to troubleshoot this.

  Read the article

• Best NIC config when virtual servers need iSCSI storage?

  - by icky2000

  I have a Windows 2008 server running Hyper-V. There are 6 NICs on the server configured like this: NIC01 & NIC02: teamed administrative interface (RDP, mgmt, etc) NIC03: connected to iSCSI VLAN #1 NIC04: connected to iSCSI VLAN #2 NIC05: dedicated to one virtual switch for VMs NIC06: dedicated to another virtual switch for VMs The iSCSI NICs are used obviously for storage to host the VMs. I put half the VMs on the host on the switch assigned to NIC05 and the other half on the switch assigned to NIC06. We have multiple production networks that the VMs could appear on so the switch ports that NIC05 & NIC06 are connected to are trunked and we then tag the NIC on the VM for the appropriate VLAN. No clustering on this host. Now I wish to assign some iSCSI storage direct to a VM. As I see it I have 2 options: Add the iSCSI VLANs to the trunked ports (NIC05 and NIC06), add two NICs to the VM that needs iSCSI storage, and tag them for the iSCSI VLANs Create two additional virtual switches on the host. Assign one to NIC03 and one to NIC04. Add two NICs to the VM that needs iSCSI storage and let them share that path to the SAN with the host. I'm wondering about how much overhead the VLAN tagging in Hyper-V has and haven't seen any discussion about that. I'm also a bit concerned that something funky on the iSCSI-connected VM could saturate the iSCSI NICs or cause some other problem that could threaten storage access for the entire host which would be bad. Any thoughts or suggestions? How do you configure your hosts when VMs connect direct to iSCSI?

  Read the article

• Group Policy for DNS Server Addresses

  - by John

  This question deals strictly with the methodology of using Active Directory to publish DNS settings and controlling the DNS server address order to domain attached clients. This is not asking about if this is the right function, role, or best use of group policy; but rather, how to make it work. I would like to be able to publish in group policy DNS addresses and possibly control the order in which the client consumes the addresses. I have tried following the information from this site without success. I set the following setting within group policy, but the client never shows the settings within the TCP/IP properties. Computer Configuration/Administrative Templates/Network/DNS Client/DNS Servers I did list them as a single space separated list. For example, the following: 192.168.0.1 192.168.10.3 192.168.34.2 192.168.2.67 192.168.56.99 192.168.99.23 This would be for Windows 7, Windows Server 2003, and Windows Server 2008 clients. I am not sure what I am doing wrong or how to get this to work. Am I missing a setting? Do I need to set something differently?

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >