Search Results

Search found 68828 results on 2754 pages for 'knapsack problem'.

Page 509/2754 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• PHP include taking too long

  - by wxiiir

  I have a php file with around 100mb which is full of arrays (only arrays). I've made a script that includes this file (for processing), first it exhausted the default Xampp 128mb memory limit, i've raised it to 1024mb but it just takes forever and doesn't do anything. I'm sure the problem is being created by the sheer size of the file because i've tried removing all lines of code and just leaving the include and an echo for me to know when it finishes executing, and it does the same thing (which is taking forever), i've also tried to run the 100mb file in separate and same thing again. A 10mb file is taking forever as well but a similar 1mb file is almost instantly read and executed so the problem must be more than just the file size. I was avoiding using c++ for a simple project as this and would rather not to as php is easier for me and the task that will be executed doesn't need to benefit from the added speed that it would have if it had been done in c++ but if i have no luck in solving this problem i guess i'll have to. EDIT Reasons for not using a database: 1-Whoever made it didn't used a database and it will be pretty hard to store this in an organized database if i'm not able to do something with it first, like just reading it, copying parts from it or putting in memory or something. 2-I don't have experience working with databases as pretty much all stuff i've ever done in php didn't needed large amounts of stored data, 50kb at best, if i was thinking about a big project or huge chunks of data as this one, i definitely would, but i didn't made this mess to start with and now i have to undo it. 3-The logic for having to store a small portion of data like 10mb in hard drive when now every computer has pretty much enough ram to fit the whole OS in it is pretty much incomprehensible unless someone gives a good explanation about it, if i had to access a lot of said files simultaneously i would understand but like i said, this is a simple project, this is the only file that will be accessed at a given time this isn't even to make some kind of website, it's to run a few times and be done with it.

  Read the article

• Allowing Xform controls for optional XML elements

  - by Cam

  Hi, In designing an XForm interface to an XML database (using eXist and XSLTForms), I'd like to include an input control for an optional element. The XML data records already exist and while some contain the optional element, others don't. To update a record, I'm using the existing XML record as the model instance. The problem is that the form control is not displayed when the optional element is not present, which is logical, but presents a problem when a user wants to add data to the optional element. To be more explicit, here's an example data record, data.xml: <a> <b>content</b> </a> with RNC schema: start = element a { element b { text }, element notes { text }? } XForms model: <xf:model> <xf:instance xmlns="" src="data.xml"/> <xf:submission id="save" method="post" action="update.xq" /> </xf:model> And control: <xf:input ref="/a/notes"> <xf:label>Notes (optional): </xf:label> </xf:input> The problem is that the 'Notes' input control is simply not displayed. An obvious solution is to add a trigger button to allow the user to insert the element if needed, but it is preferable to just have the input control appear, and be empty. My question is: is there some subtle combination of lesser-know attributes/binds/multiple instances/xpath expressions that will cause the control to always be displayed? Thanks

  Read the article

• Ant Junit tests are running much slower via ant than via IDE - what to look at?

  - by Alex B

  I am running my junit tests via ant and they are running substantially slower than via the IDE. My ant call is: <junit fork="yes" forkmode="once" printsummary="off"> <classpath refid="test.classpath"/> <formatter type="brief" usefile="false"/> <batchtest todir="${test.results.dir}/xml"> <formatter type="xml"/> <fileset dir="src" includes="**/*Test.java" /> </batchtest> </junit> The same test that runs in near instantaneously in my IDE (0.067s) takes 4.632s when run through Ant. In the past, I've been able to speed up test problems like this by using the junit fork parameter but this doesn't seem to be helping in this case. What properties or parameters can I look at to speed up these tests? More info: I am using the reported time from the IDE vs. the time that the junit task outputs. This is not the sum total time reported at the end of the ant run. So, bizarrely, this problem has resolved itself. What could have caused this problem? The system runs on a local disk so that is not the problem.

  Read the article

• Magic Method __set() on a Instanciated Object

  - by streetparade

  Ok i have a problem, sorry if i cant explaint it clear but the code speaks for its self. i have a class which generates objects from a given class name; Say we say the class is Modules: public function name($name) { $this->includeModule($name); try { $module = new ReflectionClass($name); $instance = $module->isInstantiable() ? $module->newInstance() : "Err"; $this->addDelegate($instance); } catch(Exception $e) { Modules::Name("Logger")->log($e->getMessage()); } return $this; } The AddDelegate Method: protected function addDelegate($delegate) { $this->aDelegates[] = $delegate; } The __call Method public function __call($methodName, $parameters) { $delegated = false; foreach ($this->aDelegates as $delegate) { if(class_exists(get_class($delegate))) { if(method_exists($delegate,$methodName)) { $method = new ReflectionMethod(get_class($delegate), $methodName); $function = array($delegate, $methodName); return call_user_func_array($function, $parameters); } } } The __get Method public function __get($property) { foreach($this->aDelegates as $delegate) { if ($delegate->$property !== false) { return $delegate->$property; } } } All this works fine expect the function __set public function __set($property,$value) { //print_r($this->aDelegates); foreach($this->aDelegates as $k=>$delegate) { //print_r($k); //print_r($delegate); if (property_exists($delegate, $property)) { $delegate->$property = $value; } } //$this->addDelegate($delegate); print_r($this->aDelegates); } class tester { public function __set($name,$value) { self::$module->name(self::$name)->__set($name,$value); } } Module::test("logger")->log("test"); // this logs, it works echo Module::test("logger")->path; //prints /home/bla/test/ this is also correct But i cant set any value to class log like this Module::tester("logger")->path ="/home/bla/test/log/"; The path property of class logger is public so its not a problem of protected or private property access. How can i solve this issue? I hope i could explain my problem clear.

  Read the article

• IE7 (sometimes) not showing website properly

  - by Ra y Mon

  We are a bit desperate... We have launched our website http://www.buscounviaje.com We tested all browsers (IE6-8, Firefox, Safari, Chrome, ...) to make sure everything was OK. However, there are some users (IE7 and IE6) that are complaining that they see everything 'white' with black letters (i.e. CSS styles not being applied). One user said he was getting an "Error 0: Object expected" However, we do not see that error in Firebug, nor on our local installations of IE6&7. Other users with IE6&7 are also visualizing the web correctly. We have no idea where the problem could be, and we cannot test it because our IE6&7 work fine. Anyone sees the web page without styles and give us a hint on where the problem might be? Reasons we can think of... we are compressing js and css and some versions of IE6&7 are not able to decompress them we are trying to use a non-existing object in javascript and some versions of IE6&7 do not like it the cache does not seem to be the problem... we guided a user through emptying his cache and he could still not see the web site correctly.

  Read the article

• Invoking jQuery function without an element

  - by Sandman

  So, I use jQuery quite extensively and I am well aware of the "right" way to do the below, but there are times where I want to solve it in a more generic way. I'll explain. So, I may have a link, like this: <a href='menu' class='popup'>Show menu</a>. Now, I have a jQuery function that fires on click for all a.popup that takes the href-attribute and shows the <div id='menu'></div> item (in this case). It also handles URL's if it can't find a DOM item with that ID. No problem here. But, there are times when I don't have the same control over the coe where I can create a selectable target that way. Either because the code isn't created by me or because it is created through a chain of function that would all need a huge ovrhaul which I won't do. So, from time to time, I would like to have this code: <a href="javascript:popup('menu')">Show menu</a> This would be in a case where I can only submit the label and the HREF for a link. No class, no nothing. Problem here is that the function popup() has no idea about what element invoked it, and in most cases that's not a problem for me, since I only need to know where the mouse cursor was upon invokation. But in some cases, I use someone elses jQuery functions, like qTip or something else. so I still want to fire off qTip(); when clicking a link that runs this JS function, but what do I attach it to to make it show? I can't just runt $().qTip(); because that implies $(this) and "this" is undefined inside the function. So how do I do it? Any ideas?

  Read the article

• Cancel text selection on textinput in Flex

  - by Michael

  So the real problem is the lack of an onReleaseOutside function. I found some examples of how to bypass this during a drag function but it was not applicable for a text input. The problem is that when a user selects some text in textinput and mouses off the application area and then mouses up, I'm getting a problem that the textinput keeps thinking that the mouse down is actively selecting text in the textinput and continually overwrites the characters being entered in the textinput. You can test this at http://palermo.infusedindustries.com [ in the search bar of the live store on the page, type some text, then highlight it all and don't let up on the mouse until you are outside the store. I finally hacked some junk together so I can tell if the mouse goes off the stage using some code like var x = stage.mouseX; var y = stage.mouseY; if(x < 0 || y <0 || x >stage.stageWidth || y > stage.stageHeight) I'd like to just make the textinput stop thinking it should be highlighting text so that even if the user scrolls out of the applet and mouses up that the text input still overwrites what is in the search bar and functions as normal. I can't seem to find any events or ways to tell the Flex text field to stop thinking that the mouse is down and that the user is done selecting text.

  Read the article

• JPA 2.0 Provider Hibernate Spring MVC 3.0

  - by user558019

  Dear All i have very strange problem we are using jpa 2.0 with hibernate and spring 3.0 mvc annotations based Database generated through JPA DDL is true and MySQL as Database; i will provide some refference classes and then my porblem. public abstract class Common implements serializable{ @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "id", updatable = false) private Long id; @ManyToOne @JoinColumn private Address address; //with all getter and setters //as well equal and hashCode } public class Parent extends Common{ private String name; @OneToMany(cascade = {CascadeType.MERGE,CascadeType.PERSIST}, mappedBy = "parent") private List<Child> child; //setters and rest of class } public class child extends Common{ //some properties with getter/setters } public class Address implements Serializable{ @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "id", updatable = false) private Long id; private String street; //rest of class with get/setter } as in code you can see that parents and child classes extends Common class so both have address property and id , the problem occurs when change the address refference in parent class it reflect same change in all child objects in list and if change address refference in child class then on merge it will change address refference of parent as well i am not able to figure out is it is problem of jpa or hibernate or spring thanks in advance

  Read the article

• Accepting a socket on Windows 7 takes more than a second

  - by eburger

  Here's what I've done: I wrote a minimal web server (using Qt, but I don't think it's relevant here). I'm running it on a legal Windows 7 32-bit. The problem: If I make a request with Firefox, IE, Chrome or Safari it takes takes about one second before my server sees that there is a new connection to be accepted. Clues: Using other clients (wget, own test client that just opens a socket) than Firefox, IE, Chrome, Safari seeing the new connection is matter of milliseconds. I installed Apache and tried the clients mentioned above. Serving the request takes ~50ms as expected. The problem isn't reproducible when running Windows XP (or compiling and running the same code under Linux) The problem seems to present itself only when connecting to localhost. A friend connected over the Internet and serving the connection was a matter of milliseconds. Running the server in different ports has no effect on the 1 second latency Here's what I've tried without luck: Stopped the Windows Defender service Stopped the Windows Firewall service Any ideas? Is this some clever 'security feature' in Windows 7? Why isn't Apache affected? Why are only the browsers affected?

  Read the article

• How to combine two rows and calculate the time difference between two timestamp values in MySQL?

  - by Nadar

  I have a situation that I'm sure is quite common and it's really bothering me that I can't figure out how to do it or what to search for to find a relevant example/solution. I'm relatively new to MySQL (have been using MSSQL and PostgreSQL earlier) and every approach I can think of is blocked by some feature lacking in MySQL. I have a "log" table that simply lists many different events with their timestamp (stored as datetime type). There's lots of data and columns in the table not relevant to this problem, so lets say we have a simple table like this: CREATE TABLE log ( id INT NOT NULL AUTO_INCREMENT, name VARCHAR(16), ts DATETIME NOT NULL, eventtype VARCHAR(25), PRIMARY KEY (id) ) Let's say that some rows have an eventtype = 'start' and others have an eventtype = 'stop'. What I want to do is to somehow couple each "startrow" with each "stoprow" and find the time difference between the two (and then sum the durations per each name, but that's not where the problem lies). Each "start" event should have a corresponding "stop" event occuring at some stage later then the "start" event, but because of problems/bugs/crashed with the data collector it could be that some are missing. In that case I would like to disregard the event without a "partner". That means that given the data: foo, 2010-06-10 19:45, start foo, 2010-06-10 19:47, start foo, 2010-06-10 20:13, stop ..I would like to just disregard the 19:45 start event and not just get two result rows both using the 20:13 stop event as the stop time. I've tried to join the table with itself in different ways, but the key problems for me seems to be to find a way to correctly identify the corresponding "stop" event to the "start" event for the given "name". The problem is exactly the same as you would have if you had table with employees stamping in and out of work and wanted to find out how much they actually were at work. I'm sure there must be well known solutions to this, but I can't seem to find them...

  Read the article

• Looking for out-of-place directories in an SVN working copy?

  - by jthg

  An annoyance that I sometimes come across with SVN is the working copy getting corrupted by one of the .svn folders getting moved from its original location. It doesn't happen often if you're careful and use the proper tools for all moves and renames, but it still somehow happens from time to time. First, does anyone know if there's a good way to catch the problem before a commit is even done? Cruise control usually catches the problem, but there are plenty of cases it wouldn't catch. Second, is there a quick and easy way to check for out-of-place .svn folder if I suspect that there is one? I can definitely do it manually by deducing what directory is out of place based on the compiler errors or by diffing the working copy with another clean checkout. But, this seems like a problem that SVN can diagnose in a second by giving me a list of all directories whose parent directory in the working copy doesn't match its parent directory in the repository. There there some way to have SVN give me a list like that? Thanks.

  Read the article

• Apache's AuthDigestDomain and Rails Distributed Asset Hosts

  - by Jared

  I've got a server I'm in the process of setting up and I'm running into an Apache configuration problem that I can not get around. I've got Apache 2.2 and Passenger serving a Rails app with distributed asset hosting. This is the feature of Rails that lets you serve your static assets from assets0.example.com, assets1, assets2, and so on. The site needs to be passworded until launch. I've set up HTTP authentication on the site using Apache's mod_auth_digest. In my configuration I'm attempting to use the AuthDigestDomain directive to allow access to each of the asset URLs. The problem is, it doesn't seem to be working. I get the initial prompt for the password when I load the page, but then the first time it loads an asset from one of the asset URLs, I get prompted a 2nd, 3rd, or 4th time. In some browsers, I get prompted for every single resource on the page. I'm hoping that this is only a problem of how I'm specifying my directives and not a limitation of authorization in Apache itself. See the edited auth section below: <Location /> AuthType Digest AuthName "Restricted Site" AuthUserFile /etc/httpd/passwd/passwords AuthGroupFile /dev/null AuthDigestDomain / http://assets0.example.com/ http://assets1.example.com/ http://assets2.example.com/ http://assets3.example.com/ require valid-user order deny,allow allow from all </Location>

  Read the article

• Serializing an extended form object

  - by andyperfect

  I've been reading up on this whole subject, but I never came across this specific problem. I already understand that the whole idea of serializing an entire form is a horrible idea and just doesn't work. But, I am encountering a bit of a different problem. I have a class that inherits the "button" form object, that I call DataButton. Now for my problem. I want to be able to serialize this class, but I don't need any of the information from the actual button class. Is there any way to bypass the fact that I can't set the button form object to Serializable() and notify VB that when serialization is to occur, it should simply skip over that information? Theoretically, if such a procedure were possible, I'd be able to do the entire serialization without a hitch. I came up with the idea earlier of removing the "inherits" feature from the class, and having simply a button within the class, but that makes my program really difficult to work with as I am constantly changing the location, size, backgroundImage, text, and whatnot. Thus, immediate updates would be much tougher to work with. Any help would be greatly appreciated.

  Read the article

• .NET Best Way to move many files to and from various directories??

  - by Dan

  I've created a program that moves files to and from various directories. An issue I've come across is when you're trying to move a file and some other program is still using it. And you get an error. Leaving it there isn't an option, so I can only think of having to keep trying to move it over and over again. This though slows the entire program down, so I create a new thread and let it deal with the problem file and move on to the next. The bigger problem is when you have too many of these problem files and the program now has so many threads trying to move these files, that it just crashes with some kernel.dll error. Here's a sample of the code I use to move the files: Public Sub MoveIt() Try File.Move(_FileName, _CopyToFileName) Catch ex As Exception Threading.Thread.Sleep(5000) MoveIt() End Try End Sub As you can see.. I try to move the file, and if it errors, I wait and move it again.. over and over again.. I've tried using FileInfo as well, but that crashes WAY sooner than just using the File object. So has anyone found a fool proof way of moving files without it ever erroring? Note: it takes a lot of files to make it crash. It'll be fine on the weekend, but by the end of the day on monday, it's done.

  Read the article

• Why does Perl lose foreign characters on Windows; can this be fixed (if so, how)?

  - by Alex R

  Note below how ã changes to a. NOTE2: Before you blame this on CMD.EXE and Windows pipe weirdness, see Experiment 2 below which gets a similar problem using File::Find. The particular problem I'm trying to fix involves working with image files stored on a local drive, and manipulating the file names which may contain foreign characters. The two experiments shown below are intermediate debugging steps. The ã character is common in latin languages. e.g. http://pt.wikipedia.org/wiki/Cão Experiment 1 Experiment 2 To get around my particular problem, I tried using File::Find instead of piped input. The issue actually gets worse: Debugging update: I tried some of the tricks listed at http://perldoc.perl.org/perlunicode.html, e.g. use utf8, use feature 'unicode_strings', etc, to no avail. Environment and Version Info The OS is Windows 7, 64-bit. The Perl is: This is perl 5, version 12, subversion 2 (v5.12.2) built for MSWin32-x64-multi-thread (with 8 registered patches, see perl -V for more detail) Copyright 1987-2010, Larry Wall Binary build 1202 [293621] provided by ActiveState http://www.ActiveState.com Built Sep 6 2010 22:53:42

  Read the article

• javascript unable to locate a form using the ID tag

  - by ihake

  Here's my problem: I'm trying to set up a simple mobile contact form with a captcha built in. The page I'm working on can be found here: http://m.lancasterpainting.com/contact.php I'm using the following php contact form: http://www.html-form-guide.com/contact-form/php-email-contact-form.html I want to first say that I'm not the only one to run into this problem. After googling the issue, I've found multiple people struggling with this, but no-one seems to have an answer. Now for the problem... As you can see if you visit the page, each time the page is accessed, an error appears that says "Error: couldnot get Form object contact_form". I cannot--for the life of me--figure out why the javascript can't find the form I pass it. I call the function that generates this error at the top of the page: var frmvalidator = new Validator("contact_form"); The form I'm referencing is as follows in the HTML code: <div data-role="page" data-theme="e" id="contact_form" name="contact_form" data-position="inline"> ... And the function that is called that generates the error can be found in an external .js file here: http://m.lancasterpainting.com/scripts/gen_validatorv31.js Is there something that I am simply not seeing? Why can't the javascript locate the form? Thanks so much to anyone that helps with this.

  Read the article

• CodeIgniter - the right way to create "block" elements on web page

  - by kikkoman90

  Hello. I've been searching for a solutions for this problem a while but haven't seen any "valid mvc" solution for this. I hope I can explain my problem clearly enough for you guys. I need to create a dynamic block of HTML on my website. (eg. a block containing user's latest blog comments). I have a template view file (a file containing header, content container and a footer) where I need to add some content AND this block element. The problem is that I don't want to duplicate this block code on every controller. It just feels stupid and I'm sure there's a better way to do this than just duplicating same stuff all over again on all the controller files? I can add view inside another view just fine, but what bugs me is how to actually generate that dynamic content to this block's view-file. I can't call controller from view file, controller from controller filem or model from view file because what I understand that just isn't the "mvc" way? Anyone got any tricks or tips for this?

  Read the article

• java script is not working in mozila

  - by Piyush

  I have added some javascript in html page for input validation.same page is working correct in IE and chrome but in mozila its not working.The problem is when user inputs invalid data its supposed to show alert msg box and when user clicks OK it should return false to form...BUT mozila is not waiting for alert box it just shows alert box for 5-6 sec and then goes to next page defined in form action="nextpage.php" function validate_form(thisform) { with (thisform) { if (validate_required(oldpassword, "<b>Error: </b>Please enter the Old Password!") == false) { changeColor("oldpassword"); return false; } else if (valid_length(newpassword, "<b>Error: </b>Please enter the New Password!!") == false) {newpassword.value=""; changeColor("newpassword"); return false; } else if (valid_length(cnfpassword, "<b>Error: </b>Please enter the Confirm Password!!") == false) {cnfpassword.value=""; changeColor("cnfpassword"); return false; } else if (document.getElementById('newpassword').value != document.getElementById('cnfpassword').value) {changeColor("newpassword");cool.error("<b>Error: </b>Passwords entered are not same!"); newpassword.value="";cnfpassword.value="";return false;} } }function validate_required(field, alerttxt) { with (field) { if (value == null || value == "") { cool.error(alerttxt);return false; } else { return true; } } } cool.error is nothing but CSS nd Js for alert box.I thing there is not any problem in my code weather problem is in some browser settings.Is it so??? because it is working fine in IE and Chrome.

  Read the article

• Customer wants some data to appear after you later delete rows. System giant / not my creation. Fast

  - by John Sullivan

  This is a fairly common problem, it probably has a name, I just don't know what it is. A.) User sees obscure piece of information in Row B of L_OBSCURE_INFO displayed on some screen at a certain point. It is in table L_Obscure_info. B.) Under certain circumstances we want to correctly delete data in L_OBSCURE_INFO. Unfortunately, nobody accounted for the fact that the user might want to backtrack and see some random piece of information that was most recently in L_OBSCURE_INFO. C.) The system is enormous and L_OBSCURE_INFO is used all the time. You have no idea what the ramifications are of implementing some kind of hack and whatever you do, you don't want to introduce more bugs. I think the best approach would be to create an L_OBSCURE_INFO_HISTORY table and record a record in there every time you change data. But god help your ensuring it's accurate in this system where L_OBSCURE_INFO is being touched everywhere and you don't have time to implement L_OBSCURE_INFO_HISTORY. Is there a particularly easy, clever design solution for this kind of problem -- basically an elegant database hack? If not, is this kind of design problem under a particular class of problems or have a name?

  Read the article

• ASP.NET MVC Query Help

  - by Cameron

  I have the following Index method on my app that shows a bunch of articles: public ActionResult Index(String query) { var ArticleQuery = from m in _db.ArticleSet select m; if (!string.IsNullOrEmpty(query)) { ArticleQuery = ArticleQuery.Where(m => m.headline.Contains(query)); } //ArticleQuery = ArticleQuery.OrderBy(m.posted descending); return View(ArticleQuery.ToList()); } It also doubles as a search mechanism by grabbing a query string if it exists. Problem 1.) The OrderBy does not work, what do I need to change it to get it to show the results by posted date in descending order. Problem 2.) I am going to adding a VERY SIMPLE pagination, and therefore only want to show 4 results per page. How would I be best going about this? Thanks EDIT: In addition to problem 2, I'm looking for a simple Helper class solution to implement said pagination into my current code. This ones looks very good (http://weblogs.asp.net/andrewrea/archive/2008/07/01/asp-net-mvc-quot-pager-quot-html-helper.aspx), but how would I implement it into my application. Thanks.

  Read the article

• git + partly shared files between branches/repositories. Is it possible?

  - by Maxym

  One team in company I work for has the following problem. They develop an application, which will have different builds (e.g. different design depending on customer). so they have some code shared between builds, and some specific to build. E.g. first build has (example is meaningless about files, it is just to understand the problem; I don't know exactly which code differs) /src/class1.java /src/class2.java /res/image1.png /res/image2.png second project contains /src/class1.java /src/class3.java /res/image1.png /res/image3.png as you see, both have class1.java and image1.png. Evething else is different. The project is much more complex of course, so to contain everything in one project is not comfortable... But also to make different branches and commit the same code to all of them is not comfortable... probably I picked wrong direction thinking about this problem, but I just took a look at git (we use svn), and it allows separated repositories. The question is: is it possible to make different branches in git, but tell it that "these files should be shared between them" and other files should be only in those branches. Then when developer commits class1.java git synchronizes it in all branches/repositorias etc. Maybe there is another solution which can be easy taken?

  Read the article

• Extending the CI_DB_active_record class in codeigniter 2.0

  - by ctrane

  I am writing my first program with Codeigniter, and have run into a problem. I will start with a focused description of the problem and can broaden it if I need to: I need to write a multi-dimensional array to the DB and want to use the insert_batch function from the CI_DB_active_record class to do so. The problem is that I need to write empty values as NULL for some fields while other fields need to be empty strings. The current function wraps all values with single quotes, and I cannot find a way to write null values to the database for specified fields. I would also like to increase the number of records per batch. I see how to extend models, libraries, etc., but is there a way to extend the CI_DB_active_record class without modifying core classes? The minimal amount of core class modification to make this work that I have found is modifying the following lines in the DB.php file (changing the require_once file to the new file that extends the CI_DB_active_record class and changing the CI_DB_active_record class name to the new class name): require_once(BASEPATH.'database/DB_active_rec'.EXT); if ( ! class_exists('CI_DB')) { eval('class CI_DB extends CI_DB_active_record { }'); } Can I do better?

  Read the article

• Required attribute HTML5

  - by Joop

  First of all I will explain how I stumbled into this behavior. Within my web application I am using some custom validation for my form fields. Within the same form I have two buttons. One to actually submit the form and the other to cancel/reset the form. Mostly I use Safari as my default browser. Now Safari 5 is out and suddenly my cancel/reset button didn't work anymore. Every time I did hit the reset button the first field in my form did get the focus. However this is the same behavior as my custom form validation. When trying it with another browser everything just worked fine. I had to be a Safari 5 problem. I changed a bit in my Javascript code and I found out that the following line was causing the problem: document.getElementById("somefield").required = true; To be sure that would be really the problem I created a test scenario: <!DOCTYPE html> <html> <head> <title>Test</title> </head> <body> <form id="someform"> <label>Name:</label>&nbsp;<input type="text" id="name" required="true" /><br/> <label>Car:</label>&nbsp;<input type="text" id="car" required="true" /><br/> <br/> <input type="submit" id="btnsubmit" value="Submit!" /> </form> </body> </html> What I expected would happen did happen. The first field "name" did get the focus automatically. Anyone else stumbled into this?

  Read the article

• Global State and Singletons Dependency injection

  - by Manu

  this is a problem i face lot of times when i am designing a new app i'll use a sample problem to explain this think i am writing simple game.so i want to hold a list of players. i have few options.. 1.use a static field in some class private static ArrayList<Player> players = new ArrayList<Integer>(); public Player getPlayer(int i){ return players.get(i); } but this a global state 2.or i can use a singleton class PlayerList{ private PlayerList instance; private PlayerList(){...} public PlayerList getInstance() { if(instance==null){ ... } return instance; } } but this is bad because it's a singleton 3.Dependency injection class Game { private PlayerList playerList; public Game(PlayerList list) { this.list = list; } public PlayerList getPlayerList() { return playerList; } } this seems good but it's not, if any object outside Game need to look at PlayerList (which is the usual case) i have to use one of the above methods to make the Game class available globally. so I just add another layer to the problem. didn't actually solve anything. what is the optimum solution ? (currently i use Singleton approach)

  Read the article

• Why is Attributes.IsDefined() missing overloads?

  - by Hans Passant

  Inspired by an SO question. The Attribute class has several overloads for the IsDefined() method. Covered are attributes applied to Assembly, Module, MemberInfo, ParameterInfo. The MemberInfo overload covers PropertyInfo, FieldInfo, EventInfo, MethodInfo, ConstructorInfo. That takes care of most of the AttributeTargets. Except for one biggy: there is no overload for Attribute.IsDefined(Type, Type) so that you could check if an attribute is defined on a class. Or a struct, delegate or enum for that matter. Not that this is a real problem, Type.GetCustomAttributes() can fix that. But all of the BlahInfo types have this too. I wonder at the lack of symmetry. I can't put a finger on why this would be problem for Type. Guessing at an inheritance problem doesn't explain it to me. Having ValueType in the mix might be a lead, still doesn't make sense. I don't buy "they forgot", they never do. Why is this overload missing?

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >