Search Results

Search found 48985 results on 1960 pages for 'system reserved partition'.

Page 509/1960 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

  • Recommended Win2k8 Server software to fix my RAID-0 issue

    - by Jason Kealey
    I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

    Read the article

  • Imac g5 with no OS nor CD drive

    - by sinekonata
    What I want: Ubuntu on a g5 Imac. What I have: An empty PC (Intel g5 17" Imac) with broken CD drive. Its model is A1173. This PC with Ubuntu 12.04 and an old Vista partition. a usb flash drive. Problems: No CD means the only boot Drive I could use is USB. There are no BIOS on Macs so I can't set boot settings or even see if it detects my USB drive. When I start the machine and press ALT the first and only thing I see is an old corrupted winXP partition and not a single option or additional information. So assuming blindly that the Mac hardware/firmware works normally, I don't have any Mac OS to use any of the tools that I found on different tutorials for building a bootable .img drive for macs. I can't find much software on Linux/Windows to substitute to those tools, for example among others converting an .iso file (win/linux) to .img (mac I guess). Which makes me think that the scenario where someone like me has Mac hardware but no Mac OS is extremely rare. So other than finding someone that has a Mac I have no solution. So I ask what would you do? the only thing is it should not involve any money (I know mac soft is rarely free) which also excludes getting any MacOS unless I can use a free macos.img for VM or restore the original Mac for free. Thank you

    Read the article

  • Why database partitioning didn't work? Extract from thedailywtf.com

    - by questzen
    Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

    Read the article

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • Microsoft Deployment Toolkit 2012 Error

    - by Jacob Schaer
    I just started with MDT2012 recently in hopes of eventually getting away with using Ghost to deploy all of our department computers. When I test deploy in VirtualBox, it deploys the OS properly, but stops because of a network driver failure (it gets the "could not allocate resources" issue). On physical hardware (Latitude E6500, Optiplex 980, and an older Latitude) it gets through the multicast and stops immediately after with: "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information" I've looked at the logs and never see anything really of note. Originally I was using DriverPacks from DriverPacks.net, but thinking it was a driver issue, I switched over to using Dell's cab driver packs. Still the same issue. I check and it did the HDD is all fine - it was properly partitioned, set to bootable, and was loaded with all the proper OS installer files. I'm using a flash drive to do the install - when I make changes to the deployment share I rebuild and copy the ISO to the drive, then use YUMI multiboot to start the ISO (probably irrelevant).

    Read the article

  • Using Truecrypt to secure mySQL database, any pitfalls?

    - by Saul
    The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

    Read the article

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • Cloning a failing disk (Win 7)

    - by daveh551
    I have a Windows 7 machine with several partitions on a 1.5T drive. Windows has been complaining about disk errors and imminent failure, so I have purchased a new 2TB drive. The failing disk has not completely failed, and, in fact, I was able to boot Windows from it (after a couple tries) and examine the SMART logs - the only RED item was 1 sector being reallocated. But when I try to Clone it to the new Drive using Acronis True Image Home (2010), True Image can see the drive, the partitions, and the contents, but when it goes to actually do the clone, it says "Failed to move. Make sure the destination disk is not smaller than the source disk, and that there are not errors on the disk" (or something like that). What are some other options for simply cloning the failing drive. I'd like to clone the entire disk, but am willing to do it partition by partition if necessary. Was this a known failing of the 2010 edition of ATI, or is it really something hosed in my system. Would upgrading to the 2012 edition be likely to work any better? (I'd download the trial and try it out, but if I remember right, the cloning operation is disabled in the trial version), and I don't have enough free disk space to make an entire image.) What are some other cloning software packages if ATI won't work? Note that I'm only looking to clone the disk, not make an image as a back up - I use Ghost for that, and can fall back to that if I have to. It looks to me like CloneZilla would do the job. Any recommendations? Thanks, and if this duplicates other questions, I apologize.

    Read the article

  • Lost Windows 7 boot after EasyBCD with EFI

    - by drent
    I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

    Read the article

  • I (stupidly) converted a TrueCrypt encrypted disk to GPT in Disk Management: now TrueCrypt won't mount it

    - by asilentfire
    Backstory: After moving a Macrium Reflect disk image from my TrueCrypt external drive (with whole disk encryption) onto a unencrypted drive and using Windows PE with Macrium Reflect to restore my internal disk to the recovery image on the external unencrypted drive, my Windows 8 failed to boot. I then went back and also recovered the System Partition (looking now, it is currently EFI), but I still couldn't boot into my backup.. I was in a hurry to get online for something so I just did a clean install of Windows 8, without the backup.. After I installed Windows 8, I went into Disk Management out of curiosity to see if there were other partitions with Windows 8 that Macruim might have missed, and there is (by default) a Recovery Partition of 100MB. My memory of this is hazy, as I was trying to get up and running for an exam at 4 AM: Something in Disk Management prompted me to convert my encrypted external drive to GPT.. I have no idea why I did this, but I went ahead and allowed it to convert my TrueCrypt drive to GPT. Now, I can't mount the drive in TrueCrypt.. Disk Management sees it as Disk 1, Basic, and Unallocated. I tried converting it back to MBR with Disk Management, but no dice with TrueCrypt :( If I try to mount the disk in TrueCrypt I get the message: Incorrect password or not a TrueCrypt volume I should never have messed with a Truecrypt drive in Disk Management, but I did. I have important college work in that drive, and fear I have lost it forever. PLEASE HELP

    Read the article

  • Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

    - by emotionull
    I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

    Read the article

  • Dual boot Windows 8 and Ubuntu 12.10 across a reboot

    - by AK4749
    My Setup: I have two separate SSDs, and each contains an independently bootable OS - W8 and U12.10. From my extremely limited knowledge, this means each has a functioning EFI partition(?). My default boot order (GA-Z68XP-UD3P mobo with UEFI firmware update) boots the UEFI partition containing windows first, but if I enter the BIOS I can select the "ubuntu" entry to successfully boot ubuntu. Both drives are GPT, and are EFI boots. What I want to do: Reboot Windows 8, re-enter W8 (this is happening now due to the default boot order). What I want to change, however, is to boot into Ubuntu if i reboot from ubuntu. Essentially, I would like to work within one OS unless I consciously choose otherwise. Normally, I would not even ask to something I thought was impossible, but... Why I think this is possible: When trying EasyBCD to add ubuntu to the W8 UEFI bootloader, I noticed an "iReboot" addon or something that allows you to select which OS to boot into from within the OS. Note that I ended up not using the NeoGrub entry to chain Ubuntu off the W8 bootloader because I couldn't get much help with it. Is this possible? Have I had too much coffee and gone insane? Thank you all for your time, AK

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • Corsair SSD appears completely blank and does not retain written data

    - by ebanders
    I have a 180GB Corsair SSD (model# CSSD-F180GB2-BRKT) as the primary drive in a Windows laptop. Recently the machine became unbootable after installing Windows updates. Windows installed updates before the machine shut down and the next time the machine boot up it complained about not being able to find a bootable device. After finding fixmbr unsuccessful at making the machine unbootable, I investigated a little within knoppix. Fdisk revealed an empty partition table. A scan by Testdisk came up empty. And finally 'head -c 1024 | hd' reveals all zeros. Creating a primary partition spanning the whole disk completes successfully, but after a reboot the disk appears empty again. dmesg reveals no read or write errors. smartctl indicates that the drive is healthy- although the SMART attribute values do not appear to be read properly. "Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO" and "Threshold Page | INCONSISTENT IDENTITIES IN THE DATA" messages appear within the table of values. I don't have much experience with SSDs. Is this drive dead or something? Can anyone recommend any diagnostic tools that may be suited for diagnosing SSDs?

    Read the article

  • Windows Server 2003 (w/Exchange) move to new machine

    - by James Booker
    I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

    Read the article

  • Best format for hard drive for Windows and Mac?

    - by Neil
    I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

    Read the article

  • Install Windows 8 on SSD and Program & Users on HDD

    - by Foe
    I have been dealing with a few problems while installing Windows 8 on my computer. On my old configuration, I had Windows 7 installed on my 60Go SSD, and my programs and user data on my 1To HDD, thanks to relative links. Yet, while installing Windows 8 on my SSD, he made a small partition on my HDD "System related". Plus, I'm afraid using only links is a bit cheap, and I saw lots of people messing with their registry when trying to put user data on another drive. I read a lot about optimizing Windows 8 for SSD, putting Users on another drive, and very similar situation that didn't quite correspond to what I was trying to achieve. Here's what I tried : http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html Booting on Audit mode and using an XML to relocate Users didn't work as the specified version in the file is a test one, and I don't what to enter if I'm using the last release. Booting with the install DVD in repair mode to do a copy of the User and create a relative link, resulting in an error on the logon screen while entering my password saying that "The profile can't be load" (average translation of my error from french to english) Do anyone know how to do a clean separated install of Windows 8, with OS on a drive, and the other data on a second one ? Thanks.

    Read the article

  • Concatenating gziped Apache logs

    - by markdrayton
    We rotate and compress our Apache logs each day but it's become apparent that this isn't frequently enough. An uncompressed log is about 6G, which is getting close to filling our log partition (yep, we'll make it bigger in the future!) as well as taking a lot of time and CPU to compress each day. We have to produce a gziped log for each day for our stats processing. Obviously we could move our logs to a partition with more space but I also want to spread the compression overhead throughout the day. Using Apache's rotatelogs we can rotate and compress the log more often -- hourly, say -- but how can I concatenate all the hourly compressed logs into a running compressed log for the day, without decompressing the previous logs? I don't want to uncompress 24 hours' worth of data and recompress it because that has all the disadvantages of our current solution. Gzip doesn't seem to offer any append or concatenate option but perhaps I've missed something obvious. This question suggests straight shell concatenation "works" in that the archive can be decompressed but that gzip -l doesn't work seems a bit dodgy. Alternatively, perhaps this is still a bad way to do things. Other suggestions are welcome -- our only constraints are our relatively small log partitions and the need to provide a daily compressed log.

    Read the article

  • Hungry hungry BIOS: why do I have less than 4 GiB of memory?

    - by Rhymoid
    I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

    Read the article

  • SSD won't boot anymore

    - by LordrAider
    Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

    Read the article

  • phpMyadmin issue on cpanel

    - by user1149244
    I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

    Read the article

  • How many bootable partitions are possible to have on one hard drive?

    - by draiden
    This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

    Read the article

  • Installing Debian 7.6.0 on Lenovo Y50

    - by Girauder
    I was trying to install Debian on my new laptop: a Lenovo Y50 64bit running Windows 8. I got together with a friend and installed Debian in his computer first and had no problems. However I've tried to install Debian several times using the AMD64 KDE and netinst versions and accomplished nothing. First try: installed the KDE version. Grub would let me choose which operating system I wanted, but when I selected Debian it would only load the command line. Second try: Reinstalled but this time with the netinst version. I only got a black screen where I could type but nothing else. Third Try. Tried the netinst again. This time after making the partitions I got a message that said that no EFI partition was found. I ignored the message and this time it wouldn't even load Grub. only a command like interface with grub rescue or something. Not once did I get an error during the installation. What am I doing wrong? I assume the problem is I need to make an EFI partition or something like that. So why is it that during the first installations I didn't ask me for that. And if that is indeed the problem, How can I solve it? Update So the installation failed again... as predicted. Here you can find the Disk Management picture. http://postimg.org/image/433cpfkjz/ Please somebody help me. I keep getting the grub rescue thing. secure boot is disabled and legacy support is set first.

    Read the article

  • Introducing Oracle VM Server for SPARC

    - by Honglin Su
    As you are watching Oracle's Virtualization Strategy Webcast and exploring the great virtualization offerings of Oracle VM product line, I'd like to introduce Oracle VM Server for SPARC --  highly efficient, enterprise-class virtualization solution for Sun SPARC Enterprise Systems with Chip Multithreading (CMT) technology. Oracle VM Server for SPARC, previously called Sun Logical Domains, leverages the built-in SPARC hypervisor to subdivide supported platforms' resources (CPUs, memory, network, and storage) by creating partitions called logical (or virtual) domains. Each logical domain can run an independent operating system. Oracle VM Server for SPARC provides the flexibility to deploy multiple Oracle Solaris operating systems simultaneously on a single platform. Oracle VM Server also allows you to create up to 128 virtual servers on one system to take advantage of the massive thread scale offered by the CMT architecture. Oracle VM Server for SPARC integrates both the industry-leading CMT capability of the UltraSPARC T1, T2 and T2 Plus processors and the Oracle Solaris operating system. This combination helps to increase flexibility, isolate workload processing, and improve the potential for maximum server utilization. Oracle VM Server for SPARC delivers the following: Leading Price/Performance - The low-overhead architecture provides scalable performance under increasing workloads without additional license cost. This enables you to meet the most aggressive price/performance requirement Advanced RAS - Each logical domain is an entirely independent virtual machine with its own OS. It supports virtual disk mutipathing and failover as well as faster network failover with link-based IP multipathing (IPMP) support. Moreover, it's fully integrated with Solaris FMA (Fault Management Architecture), which enables predictive self healing. CPU Dynamic Resource Management (DRM) - Enable your resource management policy and domain workload to trigger the automatic addition and removal of CPUs. This ability helps you to better align with your IT and business priorities. Enhanced Domain Migrations - Perform domain migrations interactively and non-interactively to bring more flexibility to the management of your virtualized environment. Improve active domain migration performance by compressing memory transfers and taking advantage of cryptographic acceleration hardware. These methods provide faster migration for load balancing, power saving, and planned maintenance. Dynamic Crypto Control - Dynamically add and remove cryptographic units (aka MAU) to and from active domains. Also, migrate active domains that have cryptographic units. Physical-to-virtual (P2V) Conversion - Quickly convert an existing SPARC server running the Oracle Solaris 8, 9 or 10 OS into a virtualized Oracle Solaris 10 image. Use this image to facilitate OS migration into the virtualized environment. Virtual I/O Dynamic Reconfiguration (DR) - Add and remove virtual I/O services and devices without needing to reboot the system. CPU Power Management - Implement power saving by disabling each core on a Sun UltraSPARC T2 or T2 Plus processor that has all of its CPU threads idle. Advanced Network Configuration - Configure the following network features to obtain more flexible network configurations, higher performance, and scalability: Jumbo frames, VLANs, virtual switches for link aggregations, and network interface unit (NIU) hybrid I/O. Official Certification Based On Real-World Testing - Use Oracle VM Server for SPARC with the most sophisticated enterprise workloads under real-world conditions, including Oracle Real Application Clusters (RAC). Affordable, Full-Stack Enterprise Class Support - Obtain worldwide support from Oracle for the entire virtualization environment and workloads together. The support covers hardware, firmware, OS, virtualization, and the software stack. SPARC Server Virtualization Oracle offers a full portfolio of virtualization solutions to address your needs. SPARC is the leading platform to have the hard partitioning capability that provides the physical isolation needed to run independent operating systems. Many customers have already used Oracle Solaris Containers for application isolation. Oracle VM Server for SPARC provides another important feature with OS isolation. This gives you the flexibility to deploy multiple operating systems simultaneously on a single Sun SPARC T-Series server with finer granularity for computing resources.  For SPARC CMT processors, the natural level of granularity is an execution thread, not a time-sliced microsecond of execution resources. Each CPU thread can be treated as an independent virtual processor. The scheduler is naturally built into the CPU for lower overhead and higher performance. Your organizations can couple Oracle Solaris Containers and Oracle VM Server for SPARC with the breakthrough space and energy savings afforded by Sun SPARC Enterprise systems with CMT technology to deliver a more agile, responsive, and low-cost environment. Management with Oracle Enterprise Manager Ops Center The Oracle Enterprise Manager Ops Center Virtualization Management Pack provides full lifecycle management of virtual guests, including Oracle VM Server for SPARC and Oracle Solaris Containers. It helps you streamline operations and reduce downtime. Together, the Virtualization Management Pack and the Ops Center Provisioning and Patch Automation Pack provide an end-to-end management solution for physical and virtual systems through a single web-based console. This solution automates the lifecycle management of physical and virtual systems and is the most effective systems management solution for Oracle's Sun infrastructure. Ease of Deployment with Configuration Assistant The Oracle VM Server for SPARC Configuration Assistant can help you easily create logical domains. After gathering the configuration data, the Configuration Assistant determines the best way to create a deployment to suit your requirements. The Configuration Assistant is available as both a graphical user interface (GUI) and terminal-based tool. Oracle Solaris Cluster HA Support The Oracle Solaris Cluster HA for Oracle VM Server for SPARC data service provides a mechanism for orderly startup and shutdown, fault monitoring and automatic failover of the Oracle VM Server guest domain service. In addition, applications that run on a logical domain, as well as its resources and dependencies can be controlled and managed independently. These are managed as if they were running in a classical Solaris Cluster hardware node. Supported Systems Oracle VM Server for SPARC is supported on all Sun SPARC Enterprise Systems with CMT technology. UltraSPARC T2 Plus Systems ·   Sun SPARC Enterprise T5140 Server ·   Sun SPARC Enterprise T5240 Server ·   Sun SPARC Enterprise T5440 Server ·   Sun Netra T5440 Server ·   Sun Blade T6340 Server Module ·   Sun Netra T6340 Server Module UltraSPARC T2 Systems ·   Sun SPARC Enterprise T5120 Server ·   Sun SPARC Enterprise T5220 Server ·   Sun Netra T5220 Server ·   Sun Blade T6320 Server Module ·   Sun Netra CP3260 ATCA Blade Server Note that UltraSPARC T1 systems are supported on earlier versions of the software.Sun SPARC Enterprise Systems with CMT technology come with the right to use (RTU) of Oracle VM Server, and the software is pre-installed. If you have the systems under warranty or with support, you can download the software and system firmware as well as their updates. Oracle Premier Support for Systems provides fully-integrated support for your server hardware, firmware, OS, and virtualization software. Visit oracle.com/support for information about Oracle's support offerings for Sun systems. For more information about Oracle's virtualization offerings, visit oracle.com/virtualization.

    Read the article

  • Install Ubuntu Netbook Edition with Wubi Installer

    - by Matthew Guay
    Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners.  Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive.  Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download.  Operating systems, however, are usually installed from a disk.  You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated.  However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below).  In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password.  Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition.  Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed.  Once the download is completed, it will automatically install to your computer.  If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install.  Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO.  This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer.  Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen.  Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time.  This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time.  Remember again to select Ubuntu at the boot screen.  You’ll then see a second boot screen; press your Enter key to select the default.   Ubuntu only took less than a minute to boot in our test.  When you see the login screen, select your name and enter your password you setup in Wubi.  Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens.  Pre-installed applications are displayed in the application launcher, and are organized by category.  Click once to open an application. The first screen on the application launcher shows your favorite programs.  If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix.  From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows.  Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150.  To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher.  Nice! Most applications are opened full-screen.  You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left.  Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu.  To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems.  You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list.   Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application.  Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box.  Select it, and click Uninstall. Click Uninstall at the prompt.  Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it.   Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks.  We enjoyed trying it out, and found it much more user-friendly than most Linux distros.  And with the Wubi installer, you can install it risk-free and try it out on your netbook.  Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

    Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >