Search Results

Search found 21004 results on 841 pages for 'assembly load'.

Page 510/841 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• "Oracle Coherence 3.5" Book - My Humble Review

  - by [email protected]

    After reviewing the book in more detail I say again that it is a great guide for sure. Lots of important concepts that sometimes can be somewhat confusing are deeply reviewed, including all types of caching schemes and backing maps, and the cache topologies with their corresponding performances and very useful "When to use it?" sections. Some functionalities that are very desirable or used a lot are reviewed with examples and best practices of implementation, including: Data affinity Querying Pagination Indexes Aggregations Event processing, listening and triggering Data persistence Security Regarding the networking and architecture topics, Coherence*Extend is exhaustively reviewed, including C++ and .NET clients, with very good tips and examples, even including source codes. Personally, I am also glad to see that the address providers (<address-provider> tag), new feature in Coherence 3.5 which is a way to programmatically provide well-known addresses in order to connect to the cluster, is mentioned on the book, because it provides new functionalities to satisfy some special configuration requirements for example: Provide a way to switch extend nodes in cases of failure Implement custom load balancing algorithms and/or dynamic discovery of TCP/IP connection acceptors Dynamically assign TCP address and port settings when binding to a server socket Another very interesting and useful section is the "Coherent Bank Sample Application", which is a great tutorial, useful to understand how Coherence interacts with third party products establishing a clear integration with them, including the use of non-Oracle products like MS Visual Studio.  

  Read the article

• How do you change the "scan this dir for additional ini files" path?

  - by amvx

  I managed to get the custom INI to load, but its still loading other .ini files from the default location. I created an fcgi wrapper that passed the ini value as a parameter. That worked. Now just these other ini's need to be loaded from the same dir as my custom ini. The problem is the other .ini files are overriding the settings in my custom php.ini =/ I realize the problem now is that the php.fcgi was compiled with a custom path parameter. So that's a problem. I might have to recompile it using a different location or none at all. I'd hate to have to compile an fcgi for each domain =/

  Read the article

• Parameterized StreamInsight Queries

  - by Roman Schindlauer

  The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

  Read the article

• timeout with apache & php w/ each virtual host has his own user process

  - by acemtp

  I have 10 unix users in /home/. Each user is for a specific subdomain for example user www in /home/www/public_html is for www.mywebsite. blog in /home/blog/public_html is for blog.mywebsite. 90% is php and 10% ror for the moment i use apache + fastcgi that use SuexecUserGroup to setup the process with the good user. it seems to works but i have a strange behavior where after a few hours/days, the server stop answering (timeout) but the cpu load is still very low (it's a big server), the apache status display lot of "W" Sending Reply states but there's still 50 idle workers so it should be able to answer. in the older server (lot of slower) we add only one user and using mod_php and we never had this issue. is there another way to do that without fastcgi and SuexecUserGroup or do you know what's going wrong?

  Read the article

• Can I use a 302 redirect to serve up static content from a url with escaped_fragment?

  - by Starfs

  We would like to serve up seo-friendly ajax-driven content. We are following this documentation. Has anyone ever tried to write a 302 redirect into the htaccess file, that takes the '?_escaped_fragment=' string and send that to a static page? For example /snapshot/yourfilename/ How will Google react to this? I've gone through the documentation and it's not very clear. The below quote is from Google's documentation this is what I find. I'm not sure if they are saying that you can redirect the _escaped_fragment_ url to a different static page, or if this is to redirect the hashtag URL to static content? Thoughts? From Google's site: Question: Can I use redirects to point the crawler at my static content? Redirects are okay to use, as long as they eventually get you to a page that's equivalent to what the user would see on the #! version of the page. This may be more convenient for some webmasters than serving up the content directly. If you choose this approach, please keep the following in mind: Compared to serving the content directly, using redirects will result in extra traffic because the crawler has to follow redirects to get the content. This will result in a somewhat higher number of fetches/second in crawl activity. Note that if you use a permanent (301) redirect, the url shown in our search results will typically be the target of the redirect, whereas if a temporary (302) redirect is used, we'll typically show the #! url in search results. Depending on how your site is set up, showing #! may produce a better user experience, because the user will be taken straight into the AJAX experience from the Google search results page. Clicking on a static page will take them to the static content, and they may experience avoidable extra page load time if the site later wants to switch them to the AJAX experience.

  Read the article

• Bugzilla random lag and CPU usage

  - by Serty Oan

  Here is the configuration : Bugzilla (3.4.2) application running on a Ubuntu server 8.04 with Perl 5.8.8. Here is the problem : Sometimes (randomly), pages take very long to load. It can be any of the login page or query.cgi page or buglist.cgi... etc... Using top on the server, I tried to see what was wrong, and saw that sometimes a bugzilla script would use 30% memory and last pretty long (1 to 5 seconds) and sometimes not even show in the list because it responded too quickly or just use 2%. The mysqld process does not seems to be the problem.

  Read the article

• Xorg becomes unkillable at 3AM

  - by chew socks

  Most nights, some time in the hour of 3AM my xorg process will increase to 100% cpu and gpu load will also increase to 100%. The process also becomes unkillable. I cannot sudo kill -9 it or get back control with sudo service lightdm restart. I also cannot switch to to a tty screen with ctrl + alt + f1. To reboot I have to log in with ssh, but this is not perfect because if I reboot while it is doing this my ZFS pool will fail to mount when it comes back up ( that is where my /home is ). Does anyone have any ideas as to why I can't stop and restart xorg, or even better, know why this is happening? Thanks NOTE: For anyone who comes looking for the same problem. I disabled catalyst AI and made it through the night. I've been up for 1 day 3 hours now. My record for this month is 2 days and 19 hours without a problem. My all time record is 6 days without a crash. I'll post here if it crashes again or I'm able to set a new record.

  Read the article

• Apache2 server does not start cannot pen shared object file

  - by sid__

  I am working with Apache and Passenger for a Rails project. And a during a restart I got the following error Cannot load /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so into server: /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so: cannot open shared object file: No such file or directory However there is no change in the apache configuration file. I have attached the snippet from the conf file 287 LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so 288 PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11 289 PassengerRuby /usr/bin/ruby1.8 I am also unable to locate the shared object file in the location pointed to by the server though I am not really sure how the .so file is works (created/destroyed) I would also appreciate it if someone could explain to me what exactly has happened. I understand the shared object file is mission, what could be the reason it got deleted.

  Read the article

• Weblogic Threads Usage

  - by Hila

  I have an application deployed on WebLogic 10.3, which exhibits a strange behavior. I am running a constant (not too high) load on my application (20 concurrent users, running a light activity). The response time is reasonable (well below 100ms after the application stabilizes) Memory consumption seems fine (My application creates a lot of short-living objects, but they are garbaged collected so the overall memory consumption stays under 500 mb). Threads stats seem healthy as well: And yet, after I leave my test running for a while, more and more execute threads ("[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'") are created, until eventually the application crashes: This test hasn't been running for a long time (All the new threads that you don't see in the first screenshot were created while I was writing this question), and I've seen much more threads being created. Any idea why these threads are being created?

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• What are the requirements to test a website using jquery.get() ? [migrated]

  - by Frankie

  I am working on a simple website. It has to search quite a few text files in different sub-folders. The rest of the page uses jquery, so I would like to use it for this also. The function I am looking at is .get() for downloading the files. So my main question is, can I test this on my local computer (Ubuntu Linux) or do I have to have it uploaded to a server? Also, if there's a better way to go about this, that would be nice to know. However, I'm more worried about getting it working. Thanks, Frankie PS: Heres the JS/jQuery code for downloading the files to an array. g_lists = new Array(); $(":checkbox").each(function(i){ if ($(this).attr("name") != "0") { var path = "../" + $(this).attr("name") + ".txt"; $("#bot").append("<br />" + path); // debug $.get(path, function(data){ g_lists[i] = data; $("#bot").html(data); }); } else { g_lists[i] = ""; } }); Edit: Just a note about the path variable. I think it's correct, but I'm not 100% sure. I'm new to web development. Here's some examples it produces and the directory tree of the site. Maybe it will help, can't hurt. . +-- include ¦   +-- jquery.js ¦   +-- load.js +-- index.xhtml +-- style.css +-- txt    +-- Scripting_Tools    +-- Editors.txt    +-- Other.txt Examples of path: ../txt/Scripting_Tools/Editors.txt ../txt/Scripting_Tools/Other.txt Well I'm a new user, so I can't "answer" my own question, so I'll just post it here: After asking for help on a IRC chat channel specific to jQuery, I was told I could use this on a local host. To do this I installed Apache web server, and copied my site into it's directory. More information on setting it up can be found here: http://www.howtoforge.com/ubuntu_debian_lamp_server Then to run the site I navigated my browser to "localhost" and everything works.

  Read the article

• Companies and Ships

  - by TechnicalWriting

  I have worked for small, medium, large, and extra large companies and they have something in common with ships. These metaphors have been used before, I know, but I will have a go at them.The small company is like a speed boat, exciting and fast, and can turn on a dime, literally. Captain and crew share a lot of the work. A speed boat has a short range and needs to refuel a lot. It has difficulty getting through bad weather. (Small companies often live quarter to quarter. By the way, if a larger company is living quarter to quarter, it is taking on water.)The medium company is is like a battleship. It can maneuver, has a longer range, and the crew is focused on its mission. Its main concern are the other battleships trying to blow it out of the water, but it can respond quickly. Bad weather can jostle it, but it can get through most storms.The large company is like an aircraft carrier; a floating city. It is well-provisioned and can carry a specialized load for a very long range. Because of its size and complexity, it has to be well-organized to be effective and most of its functions are specialized (with little to no functional cross-over). There are many divisions and layers between Captain and crew. It is not very maneuverable; it has to set its course well in advance and have a plan of action.The extra large company is like a cruise liner. It also has to be well-organized and changes in direction are often slow. Some of the people are hard at work behind the scenes to run the ship; others can be along for the ride. They sail the same routes over and over again (often happily) with the occasional cosmetic face-lift to the ship and entertainment. It should stay in warm, friendly waters and avoid risky speed through fields of ice bergs.I have enjoyed my career on the various Ships of Technical Writing, but I get the most of my juice from the battleship where I am closer to the campaign and my contributions have the greater impact on success.Mark Metcalfewww.linkedin.com/in/MarkMetcalfe

  Read the article

• In Outlook 2013, the reading pane does not display images correctly for most emails (but does for some)

  - by smoldyr

  I am running Microsoft Office Outlook 2013 on Windows 7 Enterprise. When I click on an email in the list of messages, the preview of the message in the reading pane usually will not show the images contained in the email, but instead will show a red 'X'. Sometimes this red 'X' is followed by the text "The linked image cannot be displayed. The file may have been moved, renmaed, or deleted. Verify that the link points to the correct file and location." I am using an IMAP email account. The really strange thing is that for some emails, the images will display, although they take a long time to load. How can I make the images show up in the reading pane?

  Read the article

• Why does gvim open session with extra/duplicate tabs?

  - by drapkin11

  I'm running gvim, have 2 files open in 2 tabs. I save the current session via the sessionman plugin by Yuri Klubakov. I close gvim (or keep gvim open but close the session, doesn't matter). When I reopen gvim and load the session, I have 3 tabs opened - two of the tabs have the same file! This is not just limited to this single session. When I open some of my other sessions, gvim opens about twice the number of tabs that I expect it to. I disabled this plugin and tried another (session by Peter Odding), but I still get the same problem. Any idea what might be going on behind the scenes?

  Read the article

• There is a porn domain pointing to my site

  - by Nicolas Martel

  Let's say example.com is my real site, and fooexample.com is the porn site. fooexample.com are pointing to my ip. Now you could think, just don't mind it right. Well the thing is that they are driving load of traffic. Not only that, but my main domain example.com become unavailable after a couple of minutes and the only domain that work is either fooexample.com or none of those 2. What i have done so far was using mod_rewrite to redirect the porn site to google but my domain still become unavailable. Blocking the ips served no result either. I hope someone will be able to help me because this is a huge problem right now. Thanks.

  Read the article

• Routing application traffic through specific interface

  - by UnicornsAndRainbows

  Hello All! First question here, so please go easy: I have a debian linux 5.0 server with two public interfaces. I would like to route outbound traffic from one instance of an application via one interface and the second instance through the second interface. There are some challenges: both instances of the application use the same protocol both instances of the application can access the entire internet (can't route based on dest network) I can't change the code of the application I don't think a typical approach to load balancing all traffic is going to work well, because there are relatively few destination servers being accessed in the outbound traffic, and all traffic would really need to be distributed pretty evenly across these relatively few servers. I could probably run two virtualized servers on the box and bind each of them to a different external ip, but I'm looking for a simpler solution, maybe using iproute or iptables? Any ideas for me? Thanks in advance - and I'm happy to answer any questions.

  Read the article

• How can I avoid heroku stopping my dyno?

  - by iwein

  I build MVP's for clients regularly. Often I deploy on Heroku so they can see if the product works and demo it to prospects and investors. Then I have an application deployed on heroku, and it works like a charm, if not for one little thing. The app takes about 30 seconds to start up and heroku has the annoying habit of killing dyno's if they don't get traffic. My client is using the application for demo purposes now, so the load is extremely low and intermittent. I'm looking for a solution that is preferably: cost effective can be applied to multiple apps simultaneously What is the best way to avoid having the first request taking 30 seconds?

  Read the article

• Xdebug 2.0.5 with Zend Server CE PHP5.2.12 possible?

  - by notbrain

  I'm using Zend Server CE with PHP 5.2.12 on OSX Snow Leopard and want to use Xdebug. I've turned off Zend Data Cache, Zend Optimizer+, and Zend Debugger in the console. When I run $ cd ~/Downloads/xdebug-2.0.5 $ /usr/local/zend/bin/phpize I get Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 The PHP API Version, 20041225, seems to be off from the documentation (aka wrong). When I continue installation with $ ./configure ---with-php-config=/usr/local/zend/bin/php-config $ make $ sudo make install The installed xdebug.so seems to be the wrong one. Which version of xdebug do I need for this PHP API version? The Zend API numbers are ok. I'm just confused at why the PHP API Version doesn't match. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/zend/lib/php_extensions/xdebug.so' - (null) in Unknown on line 0 PHP 5.2.12 (cli) (built: Feb 17 2010 13:39:36)

  Read the article

• how to figure out why sites on my server aren't loading

  - by Derek

  I seem to randomly receive "page cannot load, cannot connect to server" errors for sites on one of my servers. when this happens, it seems to only happen on certain IPs or IP ranges at a time. I say this because while I'll get the error from my home laptop I'll be able to access the site fine from my work computer or from an offsite VPS. DNS records should already be fully propagated as these records were updated months ago. I have no idea how to diagnose what's going on. Is there a tool in cpanel or outside on the web that can help me figure out what's going on?

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• ASP.NET MVC hosting recommendations

  - by chris

  I'm looking for recommendations for hosting an asp.net MVC application. Obviously, we need to be able to have access to configure IIS directly - I'd prefer not to have to go thru a control panel. The web server needs to have a dedicated IP, since some clients will be accessing it via IP. We need at least a SQLServer 2005 database, ideally on the same box. Load and usage will be pretty low, so a virtual machine will probably be fine. Does any one have any recommendations that meet the above constraints?

  Read the article

• How can I boot directly to a VirtualBox (.vdi) image (possibly via hypervisor)?

  - by Josh

  I have a system image in VirtualBox as a .vdi file. I am aware of how to convert this to other formats of VM using VBoxManage. I'd like to boot this image locally on a number of clients which currently have no OS installed. What's the simplest way to boot into this VM from bare metal? I'm willing to install some minimal OS if necessary. Is this even possible? Maybe there's something out there along the lines of VDI Blaster that will load a locally stored VM?

  Read the article

• What's more cost effective, Hosting your web startup on Foss or Windows?

  - by user37899

  Hi, Not coming from the windows world, I'm confused about licensing. I think my knowledge may be out of date. Before we gave up with windows web servers (IIS 2), we used to have to pay Client Access licence's. This worked out quite expensive. Is it cheaper to host 1000's of users on Windows than use Free open source software tools? http://serverfault.com/questions/124329/network-load-balancing-efficience-and-limits. This post suggests I can pay $15 a month, for unlimited users. I certainly hope that this is unbiased view, I am a professional and use the right technology for the right job. I hope i am not feeling the wrath of a windows (or linux for that matter) fanboy. Perhaps a Microsoft certified Licensing person can clear this up. Should i be recommending to startups windows servers and products over lamp? Cheers!

  Read the article

• How do you debug why Windows is slow?

  - by aaron

  I've got Vista Biz and when my machine chugs I think it is because of paging, but I never know how to verify this. Procexp doesn't seem to provide useful information because it appears that nothing is going on when the chugs happen. perfmon seems like it has the counters I need, but I'm never sure what counters I should add to cover the information I want. For perfmon, I prefer numbers that are percents, so I can gauge load. Here are the counters I have up, but they don't always seem to correlate to chugs: - % disk time (logical) - page faults/sec (an indicator of lots of paging activity) - processor/%priviliged time

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >