Search Results

Search found 17955 results on 719 pages for 'sub domain'.

Page 510/719 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• Need to make a scheduled task run as another user but keep the current user’s environment

  - by Chad Marmon

  I need to backup users .pst files. The current method I am trying is making a shadow copy using Diskshadow. My script works great all but Diskshadow needs to be ran as administrator but also needs to retain the logged-on user's environment variables; specifically, the %USERNAME% and %HOMESHARE% variables so the right user’s files get copied up to the right network location. I have for the most part got this to work), but there’s no straightforward (or secure, at least) way to pass the password. If I set up a scheduled task to run the script as a domain user with local admin privs, the environment variables get lost. I need to run this script automagically so that there should be no user interaction. If I could figure out how to make a scheduled task run as another user but keep the current user’s environment, I think this would work, but I’ve been beating my head against that for a while now, without any luck.

  Read the article

• IPv6 local address in hosts file

  - by Dan

  I have set up a local domain on my Apache server. Then I added the following line in my /etc/hosts file ::1 exampledomain.local After I trying to navigate to it, (I tried Firefox and Chromium) I got a server not found error. Then I tried ping6 and it worked: dan@danny:~$ ping6 exampledomain.local PING exampledomain.local(exampledomain.local) 56 data bytes 64 bytes from exampledomain.local: icmp_seq=1 ttl=64 time=0.032 ms If I replace ::1 with 127.0.0.1 in my hosts file, it works fine. I'm not sure if this is relevant but this is my Virtual Host configuration in Apache2: <VirtualHost *:80> ServerAlias exampledomain.local DocumentRoot /home/dan/sites/exampledomain <Directory /home/dan/sites/exampledomain> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/exampledomain-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog ${APACHE_LOG_DIR}/exampledomain-access.log combined </VirtualHost> My question is: How can I make it work with the IPv6 address?

  Read the article

• Dynamic group membership to work around no nested security group support for Active Directory

  - by Bernie White

  My problem is that I have a number of network administration applications like SAN switches that do not support nested groups from Active Directory Domain Services (AD DS). These legacy administration applications use either LDAP or LDAPS. I am fairly sure I can use Active Directory Lightweight Directory Services (AD LDS) and possibly Windows Authorization Manager to work around this issue; however I am not really sure where to start. I want to end up with: A single group that can be queried over LDAP/LDAPS for all it’s direct members LDAP proxy for user name and password credentials to AD DS Easy way to admin the group, ideally the group would aggregate the nested membership in AD DS. a native solution using freely available components from the Windows stack. If you have any suggestions or solutions that you have previously used to solve this issue please let me know.

  Read the article

• GPO Startup script did not execute on some computers

  - by Aaron Ooi

  The GPO Startup scripts works fine on other machine but not for another half of the machine. gpresult show that GPO was there. I ran RSOP and it show that the Startup script was there but it was never executed. There nothing on application error or anything related to the failed execution in the event viewer. I have set to Allow slow network connection too but it did not help for the startup script to execute. Permission read/execute granted to Domain Computers & Authenticated Users Other GPO settings works except Startup Script did not execute. The scripts works fine as other machine which success without any issue except some machine. I need help to sort this out as it troubles me where another half of the machine did not execute the script at all. It was all WIndows 7.

  Read the article

• my Website loss packet in 70% countries, how can i dertermine why its loss packets?

  - by user2511667

  I checked my website on google page speed tester, it show result 90/100. I checked my website on pingdom it shows good result there. When i check my website in cloudmonitor.ca.com, it shows good result in 30% countries and all other countries it show packet loss (100%) How we can determine why my website has packet loss? And what is its solution? Is this problem from my server or from my website? I created new html blank page and set it too my index page, after I tested, it still shows packet loss, guess this means the problem is not in my website. Here is live result When I visit my website in browser, website is working fine. But when i test my domain or IP 198.178.123.219 in command Prompt it shows "Request time out" Why time out in command prompt?

  Read the article

• Windows Home Server style redundancy/multi-disk-support on Windows Server 2008 R2?

  - by user19597

  I'm setting up a fileserver for our department. It'll be connected to the domain. I want it to have a very large amount of storage (several TB). Ideally, it should also preserve disk space by identifying identical files and only storing them once. It should be fault tollerant so that if one of the drives fails, that drive can be replaced without losing any data. All of these features are available in Microsoft's consumer offering - Windows Home Server. However, I can't find these kind of features within the enterprise Windows Server 2008 R2. Am I missing something? I know that I could buy a Drobo, or similar, and use this instead. However, I would prefer to use a built-in feature of Windows Server should it exist. It seems surprising to me that these features should be available in Home Server but not in an enterprise fileserver.

  Read the article

• Cannot Access IIS Website Locally Using www

  - by Reafidy

  I have small website hosted on our WS 2008 R2 server using IIS 7. I can access our website from anywhere in the world using: www.ourwebsite.co.nz But from any local computer on our internal network I can only access the website using: http://ourwebsite.co.nz Our employees are constantly asking why they cant just use www.ourwebsite.co.nz I'm not sure what info to provide. I presume that because the wesbite correctly functions from outside the local network that I have correctly setup our Web DNS A records at our domain host. And the problem may lie with our local DNS configuration.

  Read the article

• How is the "change password at next logon" requirement supposed to work with RDP using Network Level Authentication?

  - by NReilingh

  We have a Windows server (2008 R2) with the "Remote Desktop Services" feature installed and no Active Directory domain. Remote desktop is set up to "Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure)". This means that before the remote screen is displayed, the connection is authenticated in a "Windows Security: Enter your credentials" window. The only two role services installed on this server is the RD Session Host and Licensing. When the "User must change password at next logon" checkbox is selected in the properties for a local user on this server, the following displays on a client computer after attempting to connect using the credentials that were last valid: On some other servers using RDP for admin access (but without the Remote Desktop Services role installed), the behavior is different -- the session begins and the user is given a change password prompt on the remote screen. What do I need to do to replicate this behavior on the Remote Desktop Services server?

  Read the article

• Returning "200 OK" in Apache on HTTP OPTIONS requests

  - by i.

  I'm attempting to implement cross-domain HTTP access control without touching any code. I've got my Apache(2) server returning the correct Access Control headers with this block: Header set Access-Control-Allow-Origin "*" Header set Access-Control-Allow-Methods "POST, GET, OPTIONS" I now need to prevent Apache from executing my code when the browser sends a HTTP OPTIONS request (it's stored in the REQUEST_METHOD environment variable), returning 200 OK. How can I configure Apache to respond "200 OK" when the request method is OPTIONS? I've tried this mod_rewrite block, but the Access Control headers are lost. RewriteEngine On RewriteCond %{REQUEST_METHOD} OPTIONS RewriteRule ^(.*)$ $1 [R=200,L]

  Read the article

• Resolve a many-SSL-to-one IP for clients browsers that doesn't support SNI

  - by Emile

  Whoa, acronyms :) So according to this question you can have multiple SSL subdomains on one IP address as long as your server supports TLS (which Apache 2.2x does). Another answer to that question points out that the client browser must have SNI support to work, which IE doesn't have on Windows XP. So, what happens to people with that browser is a warning message saying that the SSL cert doesn't match the domain. Can one resolve this issue for those client browsers without SNI support? Does a wildcard (for subdomains) do the trick? Are there other (cheaper) options?

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• How to allow users to monitor performance of a set of servers without touching every server?

  - by Jon Seigel

  I'm not a sysadmin, so this may be trivial. We have about 20 Windows Server 2008 R2 VMs we want to monitor centrally using Perfmon. The only issue is that the user account that's going to be doing the monitoring is not (and I assume will never be) in the Administrators group. The servers, and the user account (currently one, but could be more) are all on the same domain. Right now we're running a pilot with 5 of the servers, touching each VM manually to set the permissions, which is already getting cumbersome to manage. If we decide to roll this out to all the servers, we need a scalable solution to control access. What is the most flexible way to accomplish this? I'd like a solution that would work with 200 servers just as easily as the 20 servers we have now.

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

• Transferring FSMO roles over vpn

  - by Tom Bowman

  I have a server located at one of our offices which is quite old and is due to be upgraded soon, this server holds the FSMO roles, I have another server in another office, both are DC's in the same domain and both are replicated, both run Server 2003 standard. I need to transfer the FSMO roles from the old server to the the one I have in the other office before I upgrade. Also I am looking at bringing in Exchange 2010 server however I cant install/configure that until I transfer the roles as it needs to be at the same site as the schema master. My question really is as both servers replicate over a vpn, how quickly will the roles transfer and will there be downtime as I need to make sure that while the transfer is running, both servers will service logon's and share files. or would it be better to do it out of hours? many thanks and apologies if I've missed out anything Regards Tom

  Read the article

• can't resolve host (A) but FQDN is fine

  - by user1431356

  I am getting inconsistent name resolution locally with DNS I have 3 2012 Standard servers and some weirdness on 1. It is a standard install with IIS role added. TEST01 is a dev server. 192.119.1.220 with a host header of TEST01. DATA01 runs internal DNS on .240 and all servers and clients point here for DNS. There is a forward in DNS to 192.119.1.1 (router) with ISP external DNS #s mapped. if I ping TEST01 from a non AD machine, it I get "Could not find Host TEST01" If I ping TEST01 from a domain machine(another server), it resolves the IP but does not respond. if I ping TEST01.AD.local, DNS resolves the IP, but times out. I can access IIS by entering http://test.WWWDOMAIN.com and I can RDP to it, just not ping. Any idea where I should start?

  Read the article

• how do you set the admin password on openldap 2.4

  - by dingfelder

  I am getting started with openLdap 2.4 and am having a bit of trouble, all the examples I see seem to refer to previous versions which used the text config file slapd.conf but from what I see on discussions about v2.4, this has been deprecated. I thought prehaps I needed to add a user, and log in as them but when I try and run an ldapadd command, I get a prompt to enter a password: Enter LDAP Password: ldap_bind: Invalid credentials (49) Notes: I installed openldap server via yum (in fedora 15), and have installed phpldapadminbut also can try things on the command line if anyone has suggestions. After installing and starting I get the following response from a search: # ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts # extended LDIF # LDAPv3 # base <> with scope baseObject # filter: (objectclass=*) # requesting: namingContexts dn: namingContexts: dc=my-domain,dc=com # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 I am glad to remove and reinstall the server if that helps, can anyone provide a link to tips that works for version 2.4 for a new setup?

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Migrating Shared Hosting and Email

  - by Chrisc

  Hey Guys, I know there has already been a question that has been posted here about migrating shared hosting accounts, but wanted to get a second opinion on my plan to move hosting providers. My business is moving our shared hosting account (hosting and email) to a new provider, and would like to have minimal downtime. Here is our current plan: Create a backup of our old site Upload our site to the new host Set up duplicate email accounts with our new host Change the name server records on our domain to point to our new host Leave our old site up long enough for DNS records to propagate completely. I'm hoping this should result in little downtime for both website and email. Because of the volume of high-importance emails our company receives on a daily basis downtime is very expensive and not tolerated. Thanks, Chris

  Read the article

• Logging on as root without winbind timeouts

  - by Josh Kelley

  How can I set up my Linux box so that, if the Active Directory domain controller is down, I can still log in as root, without any timeouts or delays? Following the example of most of the documentation out there, I've listed pam_winbind.so before pam_unix.so in my /etc/pam.d configurations. I believe that this is the cause of the problem. I remember seeing alternate /etc/pam.d setups that change the order and maybe add either pam_localuser or pam_succeed_if (to see if the uid is less than 500), but I can't find any specifics now (and I'm not enough of an expert in PAM to quickly and easily come up with a robust configuration on my own). What is the recommended setup for PAM with Winbind to avoid timeouts and delays if Active Directory is unavailable?

  Read the article

• Sharepoint Document Library not receiving emails

  - by ria

  I have created a sharepoint document library which is email enabled. However when i send email to the designated email address from anywhere, i dont receive the email & attachment in the list. I have done some R&D and i hv found that in order to receive email from anywhere i have to expose my DNS of the sharepoint site to the outside world. Now i dont know whether it applies to the email address designated to me in the Active directory profile as well (my company domain email address). How to test that this email reception is working in the document library? I have tried sending an email from the sharepoint site and it works fine so the SMTP settings are correctly done.

  Read the article

• Scheduled task to map a network drive runs, but doesn't map the drive

  - by bikefixxer

  I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

  Read the article

• Can I issue wireless clients with IP address on different subnet?

  - by Beanz

  We have a very standard setup with a Windows Server 2003 domain controller issuing IP addresses using DHCP. This works fine. Internet access is managed via Microsoft ISA Server 2006 Standard. Clients are required to authenticate and this works fine. We now need to provide wireless internet access to visitors for laptops, iPhones etc. We've bought a couple of Netgear access points so I was thinking we might be able to issue wireless clients connected to it with an IP address on a different subnet and then allow non-authenticated Internet access via the ISA Server for that IP range. Does that sound plausible? I'm not even sure if I can issue a different subnet to wireless clients.

  Read the article

• Windows CA to issue certificate to authenticate SSH to a Linux server

  - by BArnold

  I have a Windows Server Root Certificate Authority, Linux SSH server, and users with Windows SSH clients. The Linux box is not part of the AD domain (and probably never will be [sigh]) OpenSSH 5.4 and above supports X.509 certiicate based authentication. I am trying to find a way to use my Windows Certificate Authority to issue certificates for authentication of the users when the SSH to the Linux box. I do not want to have to generate a keypair on each user's desktop. And we want the certificates controlled and revokable at the Windows CA. My question is not exactly the same as SSH from Windows to Linux with AD certificates (and the referenced moelinux.net seems to be down) I have searched Google a lot, and haven't found much results about how to accomplish this. An answer doesn't necessarily have to include a full tutorial, even some hints about what to search on or pointers to some references may be helpful.

  Read the article

• nginx: server_name and server_addr wrong with reverse proxy in front of it

  - by user41356

  I have stunnel in front of nginx in order to handle ssl. (I'm aware that nginx can handle ssl, but I'm migrating off nginx and this is a necessary step.) Stunnel and nginx are running on the same box. Without stunnel in front of nginx, nginx got the server_addr and server_name as the public ip of the box and the domain of the url I was fetching, respectively. Now with stunnel, nginx thinks the server_addr and server_name are 127.0.0.1 and localhost respectively. This is screwing up a bunch of things. How can I make nginx get (or stunnel send) the correct server_addr and server_name?

  Read the article

• Setting up kerberos for SQL Server 2008 R2 not taking effect

  - by dotnetdev

  I am trying to configure Kerberos for my SQL Server (the database engine domain account). I have executed the following command: SETSPN -A MSSQLSvc/MyDBServer:1433 MyDomain\SQLServerService Replacing MyDBServer with the FQDN of the server and replacing MyDomain\SQLServerService with the name of my account. I then ran the query: SELECT s.session_id , c.connect_time , s.login_time , s.login_name , c.protocol_type , c.auth_scheme , s.HOST_NAME , s.program_name FROM sys.dm_exec_sessions s JOIN sys.dm_exec_connections c ON s.session_id = c.session_id This returns NTLM. So it's not Kerberos. What am I mising? The delegation tab is available for the account, so the spn bit worked perfectly fine. Is it not required to set some settings in the delegation tab? I've seen this in the case of setting kerberos for Sharepoint 2010 (which I intend to setup). Thanks

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >