Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 511/971 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

  • Cat 6 Only 100mbit speed

    - by Stu2000
    I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

    Read the article

  • IOUG SIG Webcast on October 30th : Performance Tuning your DB Cloud

    - by Anand Akela
    The Oracle Enterprise Manager Special Interest Group (SIG) is a growing body of IOUG members who manage or are interested in all aspects of Oracle Enterprise Manager. This IOUG SIG is managed by volunteers and supported by Oracle Enterprise Manager product managers and developers. The purpose of the SIG is to bring relevant information and education through webcasts, discussions and networking to users interested in learning more about the product, and to share user experiences. On October 30th at 10 AM pacific time, Oracle Enterprise Manager SIG is hosting a webcast on "Performance Tuning your DB Cloud in OEM 12c Cloud Control - 360 Degrees". In this webcast, Tariq Farooq , CEO, BrainSurface and Mike Ault, Oracle  will provide a tutorial on how to monitor and perform performance tuning of the Oracle database cloud environment. You will learn how to leverage Oracle Enterprise Manager for tuning, trouble-shooting & monitoring your Oracle Database Cloud Ecosystem. The session covers lessons learned, tips/tricks, recommendations, best practices, gotchas and a whole lot more on how to effectively use Oracle Enterprise Manager Cloud Control 12c for quick, easy & intuitive performance tuning of your Oracle Database Cloud. Session Objectives:• Leveraging OEM12c Cloud Control for Oracle DB Tuning/Monitoring • Limited Deep-Dive on AWR • Oracle DB Cloud Performance Tuning • Best Practices for DB Cloud Maintenance/Monitoring Register Now ! Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Google+ |  Newsletter

    Read the article

  • Gwibber only launches sometimes

    - by Stephen Judge
    I face this problem where Gwibber only launches sporadically. Sometimes when I click it to launch, it launches and then other times it doesn't. I can't seem to figure out what is preventing it from launching and what sort of information I need to collect, also where to collect it from to make a bug report. I have killed the gwibber-service processes in the System Monitor "it loads three processes called gwibber-service, is this normal" several times and tried to launch Gwibber again, but this doesn't seem to work. The process just called gwibber starts, then the three gwibber-service processes start, then the gwibbber process ends and the three gwibber-service processes remain but the application is still not launching. Generally, I want to know are other people facing the same problem. If someone can give me some guidance on how to triage this problem and get the information need to make a bug report I would be grateful. The upside to this though is at least when it is not launching it is preventing me from wasting endless hours reading my streams on Identi.ca and Twitter, so it is a bit Workrave for microblogging. In which case maybe I shouldn't fix this problem :-)

    Read the article

  • Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

    - by Sky
    When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

    Read the article

  • 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

    - by DarkIron112
    Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

    Read the article

  • Three Fusion Applications Communities are Now Live

    - by cwarticki
    The Fusion Application Support Team (FAST) launched three communities on the My Oracle Support Community.  These communities provide another channel for customers to get the information about Fusion Applications that they need. The three Fusion Applications communities are: ·     Technical - FA community -- covers all the Fusion Applications technology stack and technical questions from users. ·      Applications and Business Processes community -- covers all the functional questions and issues raised by users for all Fusion Applications except HCM. ·      Fusion Applications HCM community -- covers the functional questions and issues raised by users for Fusion HCM product family. Good for Our Customers Customers participating in these communities can ask questions and get timely responses from Oracle Fusion Applications experts who monitor the communities. The customers can search the Fusion Applications Community contents for information and answers. They also can collaborate with other customers and benefit from the collective experience of the community -- especially from people like you. All customers and partners are invited to join My Oracle Support Community for Fusion Applications. We believe that participating in the Fusion Applications communities can be a win-win option for everyone. We invite you to become an active part of the thriving Fusion Applications communities and experience how this interesting and insightful dialog can benefit you. How to Join the Community Navigate to http://communities.oracle.com. Click the Profile Tab to register yourself and edit your profile. ·         You can subscribe to the Fusion Applications communities by editing your Community Subscriptions. ·         You can get RSS feeds for each of your subscribed communities from the same section.

    Read the article

  • Open a File Browser From Your Current Command Prompt/Terminal Directory

    - by The Geek
    Ever been doing some work at the command line when you realized… it would be a lot easier if I could just use the mouse for this task? One command later, you’ll have a window open to the same place that you’re at. This same tip works in more than one operating system, so we’ll detail how to do it in every way we know how. Open a File Browser in Windows We’ve actually covered this before when we told you how to open an Explorer window from the command prompt’s current directory, but we’ll briefly review: Just type the follow command into your command prompt: explorer . Note: You could actually just type “start .” instead. And you’ll then see a file browsing window set to the same directory you were previous at. And yes, this screenshot is from Vista, but it works the same in every version of Windows. If that wasn’t good enough, you should really read how you can navigate in the File Open/Save dialogs with just the keyboard—now that’s a Stupid Geek Trick! Open a File Browser in Linux For this exercise, we’re going to assume that you’re using Gnome under a Linux flavor like Ubuntu, because that’s the most common. From your terminal window, just type in the following command: nautilus . And the next thing you know, you’ll have a file browser window open at the current location. You’ll see some type of error message at the prompt, but you can pretty much ignore that. You can also use “gnome-open .” if you want. Open Finder in Mac OS X All the Mac computers in this office are running Linux, so we haven’t had a chance to verify, but you should be able to use the following command on OS X to open Finder in the current terminal location: open . Open Dolphin on Linux KDE4 dolphin . Got any extra tips to help out your fellow readers? How do you do the same thing in KDE3? What about OS X? Leave your savvy advice in the comments, and maybe we’ll update the article. Or not. Either way, it’ll help somebody! Similar Articles Productive Geek Tips Keyboard Ninja: Concatenate Multiple Text Files in WindowsStupid Geek Tricks: Open an Explorer Window from the Command Prompt’s Current DirectoryHow to automate FTP uploads from the Windows Command LineShell Geek: Rename Multiple Files At OnceAdd "Open with gedit" to the right click menu in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • What is Stackify?

    - by Matt Watson
    You have developers, applications, and servers. Stackify makes sure that they are all working efficiently. Our mission is to give developers the integrated tools they need to better troubleshoot and monitor the applications they create and the servers that they run on. Traditional IT operations tools are designed for network and system administrators. Developers commonly spend 30% of their time working with IT Operations remediating application service problems. Developers currently lack tools to efficiently support the applications they create. Stackify delivers the application support functionality that developers need:View application deployment locations, versions, and historyBrowse files on servers to ensure proper deploymentsAccess configuration and log files on serversRemotely restart windows services, scheduled tasks, and web applicationsBasic server monitoring and alertsCollects all application exceptions to a centralized pointLog and report on custom applications eventsStackify is building an integrated DevOps solution delivered from the cloud designed to meet the needs of developers but also help unify the working relationship with IT operations teams and existing security roles. Our goal is to help unify the interaction between developers and IT operations. Stackify allows both teams to have visibility that they never had before  to solve complex application service issues easier and faster. Stackify’s CEO and CTO both have experience managing very large and high growth software development teams. That experience is driving our design in Stackify to deliver the integrated tools we always wished we had, the next generation of development operations tools.

    Read the article

  • Visual Studio 2010 editor painfully slow [closed]

    - by Daniel Gehriger
    I'm running out of patience with MS VisualStudio 2010: I'm working on a solution containing ~50 C++ projects. When using the editor, I experience a lag of 1 - 2 seconds whenever I move the cursor to a different line, or when I move to a different window, or generally when the editor losses and gains focus. I went through a whole series of optimizations, to no avail: installed all hotfixes for VS2010 disabled all add-ins and extensions disabled Intellisense deleted all temporary files created by VS2010 disabled hardware acceleration unloaded all but 15 projects disabled tracking changes closed all but one window and so on. This is on a Dual Core machine with SSD harddrive (verified throughput 100MB/s), enough free space on HD, Windows 7 Pro 32-bit with 3GB of RAM and most of it still free. Whenever I type a letter, CPU usage of devenv.exe goes to 50 - 90% in process monitor for 1 - 2 seconds before returning to 5%. I used Process Explorer to analyze registry and file system access, and I only notice frequent accesses to the .sln file (which is quiet small), and a few registry reads, but nothing that would raise a red flag. I don't have this problem with solutions containing less projects, so I'm inclined to think that it's related to the number of projects. For your information, the entire solution has been migrated over the years from VS2005 to VS2008 to now VS2010. Does anyone have any ideas what else I could do to resume work on this project, other than returning to VS2008?

    Read the article

  • Desktop Fun: Star Trek Wallpapers

    - by Asian Angel
    If you are a Star Trek fan then doubtless you have a favorite series and starship(s) that you love. Get ready to enjoy viewing the fleet of ships that we have gathered together for you in our Star Trek Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Note: This particular wallpaper can be trimmed up height-wise to fit your monitor’s size very nicely. For more fun wallpapers be certain to visit our new Desktop Fun section. Looking for some great icons to go with your new Star Trek wallpaper? Then be certain to check out our Sci-Fi Icon Packs collection here. Similar Articles Productive Geek Tips Desktop Customization: Sci-Fi Icon PacksWindows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Starscape Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

    Read the article

  • WebLogic Server Performance and Tuning: Part II - Thread Management

    - by Gokhan Gungor
    WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

    Read the article

  • HTG Explains: What Are Computer Algorithms and How Do They Work?

    - by YatriTrivedi
      Unless you’re into math or programming, the word “algorithm” might be Greek to you, but it’s one of the building blocks of everything you’re using to read this article. Here’s a quick explanation of what they are, and how they work. Disclaimer: I’m not a math or computer science teacher, so not all of the terms I use are technical. That’s because I’m trying to explain everything in plain English for people aren’t quite comfortable with math. That being said, there is some math involved, and that’s unavoidable. Math geeks, feel free to correct or better explain in the comments, but please, keep it simple for the mathematically disinclined among us. Image by Ian Ruotsala Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Lucky Kid Gets Playable Angry Birds Cake [Video] See the Lord of the Rings Epic from the Perspective of Mordor [eBook] Smart Taskbar Is a Thumb Friendly Android Task Launcher Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic]

    Read the article

  • Zero bytes on home partition

    - by Michael Z
    I decided to replace the hard drive on my machine running Ubuntu 12.04 LTS . After using the new hard drive for a few days, I noticed that the new hard drive has bad sectors. So I decided to plug my old hard drive back in. First, I plugged both hard drives in and copied some data files from the new hard drive to the old one. After unplugging the new hard drive, I booted the computer with the old hard drive, and here I got a surprise: I can see 0 bytes available on my /home partition! The df utility shows that the /home partition has 0 available bytes. I have tried to move some files. But I still has 0 bytes on /home! However, GParted correctly shows that the available size is near 2Gb. UPDATE 1: To my surprise, System Monitor shows me that approximately 2 Gb are free and 0 bytes are available on the /home partition. It's slightly shocked me! Are "free" and "available" not the same? Any help is really appreciated!

    Read the article

  • CodePlex Daily Summary for Friday, October 18, 2013

    CodePlex Daily Summary for Friday, October 18, 2013Popular ReleasesVoya Media: Voya Media v. 1.2.255: Voya Media is free, open-source and provides one central place to play and organize all your music, pictures and videos. Voya Media | Twitter | Facebook | Google+ Features: Scans disk drives and network shares for valid media files. Generates playlist tags based on directory names. Supports MP3 tags and cover images. Supports built-in and external SRT/SUB subtitles. Gets TV Show episode details from the tvrage.com API. Gets Movie details from the themoviedb.org API. Supports Med...Aphid: Aphid 0.1.0.17 Alpha: Added several samples Fixed + operator bugpatterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Media Companion: Media Companion MC3.582b: New* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully visible. * Movie - Manual renaming checks if 'Use Fold...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel1: v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)Social Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyTerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationSandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Wsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixes for new version look up.New ProjectsA Program to Calculate the Sum of Two Numbers: Dennis Gaya - University of HertfordshireAllow users to change their Active Directory password from SharePoint 2013: Allow users to change their Active Directory password from SharePoint 2013 user menu contextAutoCAD Code Pack: AutoCADCodePack is a powerful library that help you to develop AutoCAD plugins using the AutoCAD .NET API.Core Engine: A game engine, written by engineers, for engineers.EmeraldForum: A simple forumFcdbas: FcdbasFreedom: ...High School Behaviour Log: A web based tool for recording student detentions, behaviour issues as well as referrals and positive behaviour. Integrated with school's SIMS.net MIS system.htmlcxx unicode version: thanks for Davi de Castro Reis and Robson Braga Ara?o's work. also thanks for Kasper Peeters 's tree.hhLets Learn DirectX 11.1 Series: Lets Learn DirectX 11.1 is a project run by Ernest Loveland to make knowledge about DirectX 11.1 development more public and freely available.Migrate CPPUnit to VS2013: migrate CPPUnit to VS2013Poll System: Poll system for educational purposePort Layer: ????????,???????R.M.B: JUST XIXIRecetas_LosBorbotones: Recetas Los BorbotonesScrolltastic-Skin: Imagine A Free DotNetNuke responsive Skin, Which Will Make Your Wishes Come True. Sharepoint and web service: This is Sharepoint 2010 project, after deploy it, you can use javascript (ajax) to access sharepoint list, call a custom web service. Everything are very easy!SourceSareProject: 00TestWebApi: WebApi serviceTFSBuildMonitor: Application that in its current shape let you monitor build queues and finished builds in an easier way than what is possible throug the built in Build ExplorerTigerProjects: This project is to create a online RSS reader similar as Google ReaderVottReader: It is project simple reader and viewer for http://vott.ru site.WinFormStudy: C#??

    Read the article

  • Fun with Python

    - by dotneteer
    I am taking a class on Coursera recently. My formal education is in physics. Although I have been working as a developer for over 18 years and have learnt a lot of programming on the job, I still would like to gain some systematic knowledge in computer science. Coursera courses taught by Standard professors provided me a wonderful chance. The three languages recommended for assignments are Java, C and Python. I am fluent in Java and have done some projects using C++/MFC/ATL in the past, but I would like to try something different this time. I first started with pure C. Soon I discover that I have to write a lot of code outside the question that I try to solve because the very limited C standard library. For example, to read a list of values from a file, I have to read characters by characters until I hit a delimiter. If I need a list that can grow, I have to create a data structure myself, something that I have taking for granted in .Net or Java. Out of frustration, I switched to Python. I was pleasantly surprised to find that Python is very easy to learn. The tutorial on the official Python site has the exactly the right pace for me, someone with experience in another programming. After a couple of hours on the tutorial and a few more minutes of toying with IDEL, I was in business. I like the “battery supplied” philosophy that gives everything that I need out of box. For someone from C# or Java background, curly braces are replaced by colon(:) and tab spaces. Although I tend to miss colon from time to time, I found that the idea of tab space is actually very nice once I get use to them. I also like to feature of multiple assignment and multiple return parameters. When I need to return a by-product, I just add it to the list of returns. When would use Python? I would use Python if I need to computer anything quick. The language is very easy to use. Python has a good collection of libraries (packages). The REPL of the interpreter allows me test ideas quickly before committing them into script. Lots of computer science work have been ported from Lisp to Python. Some universities are even teaching SICP in Python. When wouldn’t I use Python? I mostly would not use it in a managed environment, such as Ironpython or Jython. Both .Net and Java already have a rich library so one has to make a choice which library to use. If we use the managed runtime library, the code will tie to the particular runtime and thus not portable. If we use the Python library, then we will face the relatively long start-up time. For this reason, I would not recommend to use Ironpython for WP7 development. The only situation that I see merit with managed Python is in a server application where I can preload Python so that the start-up time is not a concern. Using Python as a managed glue language is an over-kill most of the time. A managed Scheme could be a better glue language as it is small enough to start-up very fast.

    Read the article

  • Efficiently separating Read/Compute/Write steps for concurrent processing of entities in Entity/Component systems

    - by TravisG
    Setup I have an entity-component architecture where Entities can have a set of attributes (which are pure data with no behavior) and there exist systems that run the entity logic which act on that data. Essentially, in somewhat pseudo-code: Entity { id; map<id_type, Attribute> attributes; } System { update(); vector<Entity> entities; } A system that just moves along all entities at a constant rate might be MovementSystem extends System { update() { for each entity in entities position = entity.attributes["position"]; position += vec3(1,1,1); } } Essentially, I'm trying to parallelise update() as efficiently as possible. This can be done by running entire systems in parallel, or by giving each update() of one system a couple of components so different threads can execute the update of the same system, but for a different subset of entities registered with that system. Problem In reality, these systems sometimes require that entities interact(/read/write data from/to) each other, sometimes within the same system (e.g. an AI system that reads state from other entities surrounding the current processed entity), but sometimes between different systems that depend on each other (i.e. a movement system that requires data from a system that processes user input). Now, when trying to parallelize the update phases of entity/component systems, the phases in which data (components/attributes) from Entities are read and used to compute something, and the phase where the modified data is written back to entities need to be separated in order to avoid data races. Otherwise the only way (not taking into account just "critical section"ing everything) to avoid them is to serialize parts of the update process that depend on other parts. This seems ugly. To me it would seem more elegant to be able to (ideally) have all processing running in parallel, where a system may read data from all entities as it wishes, but doesn't write modifications to that data back until some later point. The fact that this is even possible is based on the assumption that modification write-backs are usually very small in complexity, and don't require much performance, whereas computations are very expensive (relatively). So the overhead added by a delayed-write phase might be evened out by more efficient updating of entities (by having threads work more % of the time instead of waiting). A concrete example of this might be a system that updates physics. The system needs to both read and write a lot of data to and from entities. Optimally, there would be a system in place where all available threads update a subset of all entities registered with the physics system. In the case of the physics system this isn't trivially possible because of race conditions. So without a workaround, we would have to find other systems to run in parallel (which don't modify the same data as the physics system), other wise the remaining threads are waiting and wasting time. However, that has disadvantages Practically, the L3 cache is pretty much always better utilized when updating a large system with multiple threads, as opposed to multiple systems at once, which all act on different sets of data. Finding and assembling other systems to run in parallel can be extremely time consuming to design well enough to optimize performance. Sometimes, it might even not be possible at all because a system just depends on data that is touched by all other systems. Solution? In my thinking, a possible solution would be a system where reading/updating and writing of data is separated, so that in one expensive phase, systems only read data and compute what they need to compute, and then in a separate, performance-wise cheap, write phase, attributes of entities that needed to be modified are finally written back to the entities. The Question How might such a system be implemented to achieve optimal performance, as well as making programmer life easier? What are the implementation details of such a system and what might have to be changed in the existing EC-architecture to accommodate this solution?

    Read the article

  • Heterogeneous Datacenter Management with Enterprise Manager 12c

    - by Joe Diemer
    The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category.   To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together".  In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above.   You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs.    In other words, your IT needs dictate a heterogeneous IT environment.  Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads.  Enterprise Manager provides a single pane of glass view into their entire datacenter.  By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions.  As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility.  Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions.  Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware.  Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey.  Here is a common situation solved by true visibility into your entire stack:Symptoms•    My database is bogging down, however the database appears okay internally.  Maybe it’s starved for resources?•    My OS tooling is showing everything is “OK”.  Something doesn’t add up. Root cause•    Through the VMware plugin we can see the problem is actually on the virtualization layer Solution•    From within Enterprise Manager  -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment.  No worries, Enterprise Manager still has you covered.  With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond.  Bryce can be contacted at [email protected]

    Read the article

  • Ubuntu 12.04 does not suspend with proprietary driver for Radeon 6800

    - by Mike
    I'm running Ubuntu 12.04 x86_64 (though these issues have existed in previous releases too) and have a Radeon 6800 graphics card. I've run into issues with the open-source driver (the system would randomly hang when shutting down) so I switched to the proprietary driver (I compiled it myself using these instructions), but I am having new problems now. The main issue is that when I go into sleep mode, about 50-75% of the time, the screen goes black but the monitor does not actually shut off, and I can hear that the fans/hard drive are not suspending either. I can't get the computer to wake up (Ctrl+Alt+F1,2,3,etc. does not work), and I always end up force shutting down with the power button. I'd really appreciate help! Here is some information that might be helpful: $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 4.2.11631 Compatibility Profile Context $ dmesg | grep fglrx [...] [ 6.718606] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors [...]

    Read the article

  • The Complete List of iPad Tips, Tricks, and Tutorials

    - by The Geek
    The Apple iPad is an amazing tablet, and to help you get the most out of it, we’ve put together a comprehensive list of every tip, trick, and tutorial for you. Read on for more. Note: This article was originally published earlier this year, but we’ve updated it with a real lot more content since then, so we’re republishing it for you. We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

    Read the article

  • CodePlex Daily Summary for Tuesday, June 03, 2014

    CodePlex Daily Summary for Tuesday, June 03, 2014Popular ReleasesQuickMon: Version 3.14 (Pie release): This is unofficially the 'Pie' release. There are two big changes.1. 'Presets' - basically templates. Future releases might build on this to allow users to add more presets. 2. MSI Installer now allows you to choose components (in case you don't want all collectors etc.). This means you don't have to download separate components anymore (AllAgents.zip still included in case you want to use them separately) Some other changes:1. Add/changed default file extension for monitor packs to *.qmp (...VeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Keepass2Android: 0.9.4-pre1: added plug-in support: See settings for how to get plug-ins! published QR plug-in (scan passwords, display passwords as QR code, transfer entries to other KP2A devices) published InputStick plugin (transfer credentials to your PC via bluetooth - requires InputStick USB stick) Third party apps can now simply implement querying KP2A for credentials. Are you a developer? Please add this to your app if suitable! added TOTP support (compatible with KeeOTP and TrayTotp) app should no l...Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from http://www.microsoft.com/en-us/download/details.aspx?id=43126 This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy htt...Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Portable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Composite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsAirline Management Solutions: Three layers architecture PHP Maria DB Metro-StyleBAOnline: tttboomteam: Fitness videoscsv2xlsx: this project was created to simplify process of converting csv text files to Excel tables. It uses Apache POI to work with Excel Hazza.ShapeField: Adds a field that lets you input the name of a shape to be displayed.HP AGM Monitor Service: Just for internal usage.HP AGM RestAPI Wrapper: HP AGM Rest API .Net WrapperIO Performance Verifier: IO Performance verifier is for verifying IO from fx SAN/NAS in a virtualized environment on Windows servers. Useful to verify SLA or configuration change effectIRIS Tutorials: This a repository of tutorials for the IRIS Toolbox project.Node Service Host: Host application to run node app as a service. Runs service as root with app as specified user, restarts, logging. Linux, OSX and windows.SEND SMS ALERT FROM YOUR SOFTWARE / WEBSITE: SMS API allows you to send SMS to all mobile operators across Pakistan or any other country at very very cheap rates. It allows you to send SMS through http://CSharePoint Audit Facilities Demo: Sample demo code for SharePoint Audit Log extraction and methods used. SharePoint Permission Analyzer: Permission Analyzer will scan through a SharePoint site collection and create a permission structure of the site. Works on SharePoint 2010 and SP 2013Spotify WinRT Component: WinRT Component wrapper for libspotify https://developer.spotify.com/technologies/libspotify/Windows API Interop Library: A collection of interop code in C# for the Windows API. Key exported methods, constants and structures defined. Some extension methods for WinForms controls.WPF Pricing unit: await async wpf Entity framework 6zzswire: ????

    Read the article

  • CodePlex Daily Summary for Thursday, June 05, 2014

    CodePlex Daily Summary for Thursday, June 05, 2014Popular Releases51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Load Runner - HTTP Pressure Test Tool: Load Runner 1.1: 1. added support for measuring total in time / hits / traffic / requests 2. abstracted log, default log to console / text file 3. refactored codeKartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountMagicaVoxel: MagicaVoxel Renderer ver 0.01: MagicaVoxel Renderer (Win 0.01)ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.MCE Controller: MCE Controller V1.8.6: BETA. Adds option to disable all internal commands. If the "Disable Internal Commands" checkbox in settings is checked, MCE Controller will disable all internally defined commands (e.g. VK key codes, single characters, mouse commands, etc...) and only respond to commands defined in the MCEControl.commmands file. Attempts to fix inability for clients to reconnect after they forcibly close the connection. Build 1.8.6.37445Visual F# Tools: Daily Builds Preview 06-04-2014: This preview is released for use under a proprietary license.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.Service monitor: Version 3.1: Added the ability of the tool to restart itself in 'Admin' mode without UAC prompt. Note that this only works after the tool has run in 'Admin' mode at least once before. This is only supported on Vista, Windows 7 or later. See my blog post on how it is done.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegQuickMon: Version 3.14 (Pie release): This is unofficially the 'Pie' release. There are two big changes.1. 'Presets' - basically templates. Future releases might build on this to allow users to add more presets. 2. MSI Installer now allows you to choose components (in case you don't want all collectors etc.). This means you don't have to download separate components anymore (AllAgents.zip still included in case you want to use them separately) Some other changes:1. Add/changed default file extension for monitor packs to *.qmp (...VeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Keepass2Android: 0.9.4-pre1: added plug-in support: See settings for how to get plug-ins! published QR plug-in (scan passwords, display passwords as QR code, transfer entries to other KP2A devices) published InputStick plugin (transfer credentials to your PC via bluetooth - requires InputStick USB stick) Third party apps can now simply implement querying KP2A for credentials. Are you a developer? Please add this to your app if suitable! added TOTP support (compatible with KeeOTP and TrayTotp) app should no l...Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.New Projects12306helper: 12306 ????2112110044: dasda2112110202: asdfsdfsdfsd2112110298: TieuDan2112110315: vftgcdxfrBaidu PCS: BaiduPCSExcel2Sobek: Here the project Excel2Sobek is hosted. Excel2Sobek is a preprocessor in Excel's VBA for the SOBEK 2 hydrological and hydraulic simulation model by Deltares.Help Desk Pro: Manage a business of customer serviceMARGYE: MARGYE CMS CMR E-CommerceMemberBS: MemberBS20140605MiKroTik API: Api untuk menghubungkan aplikasi anda dengan router Mikrotik.MiniProfiler + Log4Net: Use MiniProfiler and Log4Net in ASP.NET projectStore Apps Unity App Base for Prism: This simple library provides an Application Base for a Windows Store application that automatically connects Unity to provide injection as the container.SuperCaptcha for MVC: Custom captcha control for MVCTC760240: myappwithfailuresWindows Phone 8 Dilbert Comic Reader: Basic WP8.1 app that displays comics from http://www.dilbert.com.x86 Proved: Prove what you run!

    Read the article

  • Intel graphic chipset and NVIDIA Geforce GTX560

    - by antoine
    I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

    Read the article

  • What You Said: How You Find New Books

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your tips and tricks for finding fresh books to enjoy. Now we’re back with tips ranging from the old school to the digital. SJ highlights several of the most popular web-based tools for finding new books: Goodreads.com is quick and easy. Yournextread.com is fun and helps a lot. But I gotta be honest, Amazon’s suggestions are probably the most useful to me. TheFu suggests checking out award-winning lists and one rather quirky way to pick a good Sci-Fi book: For scifi, see Hugo winning books. Life is too short to read bad books. Sometimes that leads to an author with an entire series of books to enjoy. I really enjoy some of the scifi from the 40s and 50s. Wells stuff is always timeless too (and free). I’m less happy with Nebula winners–-different type of writers and not my personal taste. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • what is the best program to capture my workings as an AVI or MPEG

    - by raihanchy
    I have already used recordmydesktop, xvidcap and kazam. My sound working fine with other audio or videos. xvidcap doesn't record sound at all. I have tried many ways. If I try as: 'padsp xvidcap', it also gives error, like: /dev/dsp cannot found or missing. I have changed it to /dev/snd. Still no effect. Even I can record sound through gnome-sound-recorder - after pressing record button, I open pavucontrol. Then from Recording tab, I choose 'Monitor of Analog Stereo'. But if I run xvidcap, I don't get that option in pavucontrol. kazam works a bit slow. It records at the beginning of the captured video. But for unknown reason, it eventually the sounds just go off. Also the video is not smooth as xvidcap. Though Kazam output as H64/MP4. Record my Desktop also doesn't give sound. Can you guys please help me, either - how to get sound with xvidcap or how kazam could be record nicely. I am looking something Camtasia, as used for Windows. Thanks in advance. Raihan

    Read the article

  • IoT Wearables

    - by Tom Caldecott-Oracle
    A Reprint from The Java Source Blog By Tori Wieldt on Aug 20, 2014 Wearables are a subset of the Internet of Things that has gained a lot of attention. Wearables can monitor your infant's heartrate, open your front door, or warn you when someone's trying to hack your enterprise network. From Devoxx UK to Oracle OpenWorld to Devoxx4kids, everyone seems to be doing something with wearables.  In this video, John McLear introduces the NFC Ring. It can be used to unlock doors, mobile phones, transfer information and link people. The software for developers is open source, so get coding! If you are coming to JavaOne or Oracle OpenWorld, join us for Dress Code 2.0, a wearables meetup. Put on your best wearables gear and come hang out with the Oracle Applications User Experience team and friends at the OTN Lounge. We'll discuss the finer points of use cases, APIs, integrations, UX design, and fashion and style considerations for wearable tech development. There will be gifts for attendees sporting wearable tech, while supplies last. What: Dress Code 2.0: A Wearables Meetup When: Tuesday, 30-September-2014, 4-6 PM Where: OTN Lounge at Oracle OpenWorld IoT - Wearable Resources The IoT Community on Java.net Wearables in the World of Enterprise Applications? Yep. The Paradox of Wearable Technologies Conference: Wearable Sensors and Electronics (Santa Clara, USA) Devoxx4Kids Workshop for Youth: Wearable tech! (Mountain View, USA)

    Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >