Search Results

Search found 36981 results on 1480 pages for 'string formatting'.

Page 511/1480 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

  • Help with a loop to return UIImage from possible matches

    - by Canada Dev
    I am parsing a list of locations and would like to return a UIImage with a flag based on these locations. I have a string with the location. This can be many different locations and I would like to search this string for possible matches in an NSArray, and when there's a match, it should find the appropriate filename in an NSDictionary. Here's an example of the NSDictionary and NSArray: NSDictionary *dict = [NSDictionary dictionaryWithObjectsAndKeys: @"franceFlag", @"france", @"greeceFlag", @"greece", @"spainFlag", @"spain", @"norwayFlag", @"norway", nil]; NSArray *array = [NSArray arrayWithObjects: @"france" @"greece" @"spain" @"portugal" @"ireland" @"norway", nil]; Obviously I'll have a lot more countries and flags in both. Here's what I have got to so far: -(UIImage *)flagFromOrigin:(NSString *)locationString { NSRange range; for (NSString *arrayString in countryArray) { range = [locationString rangeOfString:arrayString]; if (range.location != NSNotFound) { return [UIImage imageWithContentsOfFile:[[NSBundle mainBundle] pathForResource:[dictionary objectForKey: arrayString] ofType:@"png"]]; } } return nil; } Now, the above doesn't actually work. I am missing something (and perhaps not even doing it right in the first place) The issue is, the locationString could have several locations in the same country, described something like this "Barcelona, Spain", "Madrid, Spain", "North Spain", etc., but I just want to retrieve "Spain" in this case. (Also, notice caps for each country). Basically, I want to search the locationString I pass into the method for a possible match with one of the countries listed in the NSArray. If/When one is found, it should continue into the NSDictionary and grab the appropriate flag based on the correct matched string from the array. I believe the best way would then to take the string from the array, as this would be a stripped-out version of the location. Any help to point me in the right direction for the last bit is greatly appreciated.

    Read the article

  • how run Access 2007 module in Vb6?

    - by Mahmoud
    I have created a module in access 2007 that will update linked tables, but I wanted to run this module from vb6. I have tried this code from Microsoft, but it didnt work. Sub AccessTest1() Dim A As Object Set A = CreateObject("Access.Application") A.Visible = False A.OpenCurrentDatabase (App.Path & "/DataBase/acc.accdb") A.DoCmd.RunMacro "RefreshLinks" End Sub What I am aiming to do, is to allow my program to update all linked tables to new links, in case the program has been used on other computer In case you want to take a look at the module program, here it is: Sub CreateLinkedJetTable() Dim cat As ADOX.Catalog Dim tbl As ADOX.Table Set cat = New ADOX.Catalog ' Open the catalog. cat.ActiveConnection = CurrentProject.Connection Set tbl = New ADOX.Table ' Create the new table. tbl.Name = "Companies" Set tbl.ParentCatalog = cat ' Set the properties to create the link. tbl.Properties("Jet OLEDB:Link Datasource") = CurrentProject.Path & "/db3.mdb" tbl.Properties("Jet OLEDB:Remote Table Name") = "Companies" tbl.Properties("Jet OLEDB:Create Link") = True ' To link a table with a database password set the Link Provider String ' tbl.Properties("Jet OLEDB:Link Provider String") = "MS Access;PWD=Admin;" ' Append the table to the tables collection. cat.Tables.Append tbl Set cat = Nothing End Sub Sub RefreshLinks() Dim cat As ADOX.Catalog Dim tbl As ADOX.Table Set cat = New ADOX.Catalog ' Open the catalog. cat.ActiveConnection = CurrentProject.Connection Set tbl = New ADOX.Table For Each tbl In cat.Tables ' Verify that the table is a linked table. If tbl.Type = "LINK" Then tbl.Properties("Jet OLEDB:Link Datasource") = CurrentProject.Path & "/db3.mdb" ' To refresh a linked table with a database password set the Link Provider String 'tbl.Properties("Jet OLEDB:Link Provider String") = "MS Access;PWD=Admin;" End If Next End Sub

    Read the article

  • JPA 2.0 How to persist in order

    - by parhs
    hello i am having two entities... Exam and Exam_Normal EXAM @Id @GeneratedValue(strategy=GenerationType.IDENTITY) private Long id; private String name; private String codeName; @Enumerated(EnumType.STRING) private ExamType examType; @ManyToOne private Category category; @OneToMany(mappedBy="id",cascade=CascadeType.PERSIST) @OrderBy("id") private List<Exam_Normal> exam_Normal; EXAM_NORMAL @Id private Long item; @Id @ManyToOne private Exam id; @Enumerated(EnumType.STRING) private Gender gender; private Integer age_month_from; private Integer age_month_to; The problem is that if i put a list of EXAM_NORMAL at an EXAM class if i try to persist(EXAM) i get an error because it tries to persist EXAM_NORMAL first but it cant because the primary keyof EXAM is missing because it isnt persisted... Is there any way to define the order?Or i should set null the list ,persist and then set the list again ? thanks:)

    Read the article

  • In Silverlight 3 how can I get the call to HtmlPage.Plugin.SetStyleAttribute() call to call other co

    - by John Rennemeyer
    I'm trying to take a snapshot of my Silverlight control using WriteableBitmap and it works fine, however, it only takes a snapshot of what is showing. I'm trying to resize the Silverlight control so it will show everything and then take a screenshot, however, the code doesn't resize the control until after the code after the call all runs which is the snapshot code... I can get this work using a timer to fire the snapshot after the other code has caused the resize but I'm wondering if there is a better way. The HtmlPage.Plugin.SetStyleAttribute call has to be called from the UI thread so I'm assuming that's where the problem is. The fact that it is being dispatched onto the UI thread while the rest of the code is not and so the other code is being run first. Is there anyway to create a new event or attach to the call to determine when it has been run to then fire off my snapshot code? I have the following code: private void btnTakeSnapshot_Click(object sender, System.Windows.RoutedEventArgs e) { if (CurrentContractAction != null) { string heightBefore = HtmlPage.Plugin.GetStyleAttribute("height"); HtmlPage.Plugin.SetStyleAttribute("height", string.Format("{0}px", "1800")); //this line doesn't change the height until after the "TakeSnapshot" code is run for some reason, I'm thinking it is because it is most likely dispatched to the UI thread :( and the following code is not run on the UI thread Snapshot snapshot = new Snapshot(string.Format("Action_Schedule_{0}", CurrentContractAction.Title), LayoutRoot, LayoutRoot, busyIndicatorDataGrid); snapshot.HideElements(btnViewGanttChart, btnSave, btnEditAction, btnFullScreen, btnTakeSnapshot, btnLockAndSubmit); snapshot.TakeSnapshot(); snapshot.ResetElementsVisibility(); HtmlPage.Plugin.SetStyleAttribute("height", string.Format("{0}px", heightBefore)); } } Thanks, John

    Read the article

  • Dilemma with two types and operator +

    - by user35443
    I have small problem with operators. I have this code: public class A { public string Name { get; set; } public A() { } public A(string Name) { this.Name = Name; } public static implicit operator B(A a) { return new B(a.Name); } public static A operator+(A a, A b) { return new A(a.Name + " " + b.Name); } } public class B { public string Name { get; set; } public B() { } public B(string Name) { this.Name = Name; } public static implicit operator A(B b) { return new A(b.Name); } public static B operator +(B b, B a) { return new B(b.Name + " " + a.Name); } } Now I want to know, which's conversion operator will be called and which's addition operator will be called in this operation: new A("a") + new B("b"); Will it be operator of A, or of B? (Or both?) Thanks....

    Read the article

  • Android :WindowManager$BadTockenException on Spinner Click

    - by Miya
    Hi, I have a spinner in my home.class. When I click on the spinner, the process is stopped showing exception that WindowManager$BadTockenException is caught. I am calling this home.class from main.class which extends ActivityGroup. If I am simply run only the home.class, the spinner is showing all items. But the problem is only with calling home.class from main.class. The following are my code. Please tell me why this is happened. main.class public class main extends ActivityGroup { public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); Intent intent=new Intent(this,home.class); View view=getLocalActivityManager().startActivity("1", intent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP)).getDecorView(); setContentView(view); } } home.class String[] country={"Please selects","US","INDIA","UK"}; Spinner s2 = (Spinner) findViewById(R.id.spinnerCountry); ArrayAdapter<CharSequence> adapterCountry=new ArrayAdapter(this,android.R.layout.simple_spinner_item,country); adapterCountry.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); s2.setAdapter(adapterCountry); s2.setOnItemSelectedListener(new OnItemSelectedListener() { public void onItemSelected( AdapterView<?> parent, View view, int position, long id) { countryName=country[position]; } public void onNothingSelected(AdapterView<?> parent) { countryName=country[0]; } }); Stack Thread [<1 main] (Suspended (exception WindowManager$BadTokenException)) AlertDialog(Dialog).show() line: 245 AlertDialog$Builder.show() line: 802 Spinner.performClick() line: 260 View$PerformClick.run() line: 9080 ViewRoot(Handler).handleCallback(Message) line: 587 ViewRoot(Handler).dispatchMessage(Message) line: 92 Looper.loop() line: 123 ActivityThread.main(String[]) line: 3647 Method.invokeNative(Object, Object[], Class, Class[], Class, int, boolean) line: not available [native method] Method.invoke(Object, Object...) line: 507 ZygoteInit$MethodAndArgsCaller.run() line: 839 ZygoteInit.main(String[]) line: 597 NativeStart.main(String[]) line: not available [native method] Thank You....

    Read the article

  • using threads in menu options

    - by vbNewbie
    I have an app that has a console menu with 2/3 selections. One process involves uploading a file and performing a lengthy search process on its contents, whilst another process involves SQL queries and is an interactive process with the user. I wish to use threads to allow one process to run and the menu to offer the option for the second process to run. However you cannot run the first process twice. I have created threads and corrected some compilation errors but the threading options are not working correctly. Any help appreciated. main... Dim tm As Thread = New Thread(AddressOf loadFile) Dim ts As Thread = New Thread(AddressOf reports) .... While Not response.Equals("3") Try Console.Write("Enter choice: ") response = Console.ReadLine() Console.WriteLine() If response.Equals("1") Then Console.WriteLine("Thread 1 doing work") tm.SetApartmentState(ApartmentState.STA) tm.IsBackground = True tm.Start() response = String.Empty ElseIf response.Equals("2") Then Console.WriteLine("Starting a second Thread") ts.Start() response = String.Empty End If ts.Join() tm.Join() Catch ex As Exception errormessage = ex.Message End Try End While I realize that a form based will be easier to implement with perhaps just calling different forms to handle the processes.But I really dont have that option now since the console app will be added to api later. But here are my two processes from the menu functions. Also not sure what to do with the boolean variabel again as suggested below. Private Sub LoadFile() Dim dialog As New OpenFileDialog Dim response1 As String = Nothing Dim filepath As String = Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments) dialog.InitialDirectory = filepath If dialog.ShowDialog() = DialogResult.OK Then fileName = dialog.FileName ElseIf DialogResult.Cancel Then Exit Sub End If Console.ResetColor() Console.Write("Begin Search -- Discovery Search, y or n? ") response1 = Console.ReadLine() If response1 = "y" Then Search() ElseIf response1 = "n" Then Console.Clear() main() End If isRunning = False End Sub and the second one Private Shared Sub report() Dim rptGen As New SearchBlogDiscovery.rptGeneration Console.WriteLine("Tread Process started") rptGen.main() Console.WriteLine("Thread Process ended") isRunning = False End Sub

    Read the article

  • Heroku only initializes some of my models.

    - by JayX
    So I ran heroku db:push And it returned Sending schema Schema: 100% |==========================================| Time: 00:00:08 Sending indexes schema_migrat: 100% |==========================================| Time: 00:00:00 projects: 100% |==========================================| Time: 00:00:00 tasks: 100% |==========================================| Time: 00:00:00 users: 100% |==========================================| Time: 00:00:00 Sending data 8 tables, 70,551 records groups: 100% |==========================================| Time: 00:00:00 schema_migrat: 100% |==========================================| Time: 00:00:00 projects: 100% |==========================================| Time: 00:00:00 tasks: 100% |==========================================| Time: 00:00:02 authenticatio: 100% |==========================================| Time: 00:00:00 articles: 100% |==========================================| Time: 00:08:27 users: 100% |==========================================| Time: 00:00:00 topics: 100% |==========================================| Time: 00:01:22 Resetting sequences And when I went to heroku console This worked >> Task => Task(id: integer, topic: string, content: string, This worked >> User => User(id: integer, name: string, email: string, But the rest only returned something like >> Project NameError: uninitialized constant Project /home/heroku_rack/lib/console.rb:150 /home/heroku_rack/lib/console.rb:150:in `call' /home/heroku_rack/lib/console.rb:28:in `call' >> Authentication NameError: uninitialized constant Authentication /home/heroku_rack/lib/console.rb:150 /home/heroku_rack/lib/console.rb:150:in `call' update 1: And when I typed >> ActiveRecord::Base.connection.tables it returned => ["projects", "groups", "tasks", "topics", "articles", "schema_migrations", "authentications", "users"] Using heroku's SQL console plugin I got SQL> show tables +-------------------+ | table_name | +-------------------+ | authentications | | topics | | groups | | projects | | schema_migrations | | tasks | | articles | | users | +-------------------+ So I think they are existing in heroku's database already. There is probably something wrong with rack db:migrate update 2: I ran rack db:migrate locally in both production and development modes and nothing wrong happened. But when I ran it on heroku it only returned: $ heroku rake db:migrate (in /disk1/home/slugs/389817_1c16250_4bf2-f9c9517b-bdbd-49d9-8e5a-a87111d3558e/mnt) $ Also, I am using sqlite3 update 3: so I opened up heroku console and typed in the following command class Authentication < ActiveRecord::Base;end Amazingly I was able to call Authentication class, but once I exited, nothing was changed.

    Read the article

  • help date format in vb.net

    - by bachchan
    Dim Con As OleDb.OleDbConnection Dim Sql As String = Nothing Dim Reader As OleDb.OleDbDataReader Dim ComboRow As Integer = -1 Dim Columns As Integer = 0 Dim Category As String = Nothing Dim oDatumMin As Date Dim column As String column = Replace(TxtDateMax.Text, "'", "''") 'oDatumMin = Convert.ToDateTime(TxtDateMin.Text) oDatumMin = DtpMin.Value Dim oPath As String oPath = Application.StartupPath ' Select records. Con = New OleDb.OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & oPath & "\trb.accdb;") Dim cmd As New OleDb.OleDbCommand 'Dim data_reader As OleDbDataReader = cmd.ExecuteReader() Sql = ("SELECT * FROM " & cmbvalue & " WHERE Datum>='" & oDatumMin & "'") cmd = New OleDb.OleDbCommand(Sql, Con) Con.Open() Reader = cmd.ExecuteReader() Do While Reader.Read() Dim new_item As New ListViewItem(Reader.Item("Datum").ToString) new_item.SubItems.Add(Reader.Item("Steleks i krpe za cišcenje-toal papir-ubrusi-domestos").ToString) new_item.SubItems.Add(Reader.Item("TEKUCINA ZA CIŠCENJE PLOCICA").ToString) new_item.SubItems.Add(Reader.Item("KESE ZA SMECE").ToString) new_item.SubItems.Add(Reader.Item("OSTALO-džoger-spužva za laminat").ToString) new_item.SubItems.Add(Reader.Item("PAPIR").ToString) LvIzvjestaj.Items.Add(new_item) Loop ' Close the connection.strong text Con.Close()`` when i select table,(cmbvalue) from combobox and when i select date from datetime picker (dtp) or in last case from texbox converted to date and time sql looks like this "SELECT * FROM Uprava WHERE Datum='2.6.2010 10:28:14'" and all query looks ok but am geting Data type mismatch in criteria expression. error for date (oDatumMin) when excute column in access is also set to date i have no idea what else to try

    Read the article

  • Which pattern to use for logging? Dependency Injection or Service Locator?

    - by andlju
    Consider this scenario. I have some business logic that now and then will be required to write to a log. interface ILogger { void Log(string stuff); } interface IDependency { string GetInfo(); } class MyBusinessObject { private IDependency _dependency; public MyBusinessObject(IDependency dependency) { _dependency = dependency; } public string DoSomething(string input) { // Process input var info = _dependency.GetInfo(); var intermediateResult = PerformInterestingStuff(input, info); if (intermediateResult== "SomethingWeNeedToLog") { // How do I get to the ILogger-interface? } var result = PerformSomethingElse(intermediateResult); return result; } } How would you get the ILogger interface? I see two main possibilities; Pass it using Dependency Injection on the constructor. Get it via a singleton Service Locator. Which method would you prefer, and why? Or is there an even better pattern? Update: Note that I don't need to log ALL method calls. I only want to log a few (rare) events that may or may not occur within my method.

    Read the article

  • What is the fastest (possibly unsafe) way to read a byte[]?

    - by Aidiakapi
    I'm working on a server project in C#, and after a TCP message is received, it is parsed, and stored in a byte[] of exact size. (Not a buffer of fixed length, but a byte[] of an absolute length in which all data is stored.) Now for reading this byte[] I'll be creating some wrapper functions (also for compatibility), these are the signatures of all functions I need: public byte ReadByte(); public sbyte ReadSByte(); public short ReadShort(); public ushort ReadUShort(); public int ReadInt(); public uint ReadUInt(); public float ReadFloat(); public double ReadDouble(); public string ReadChars(int length); public string ReadString(); The string is a \0 terminated string, and is probably encoded in ASCII or UTF-8, but I cannot tell that for sure, since I'm not writing the client. The data exists of: byte[] _data; int _offset; Now I can write all those functions manually, like this: public byte ReadByte() { return _data[_offset++]; } public sbyte ReadSByte() { byte r = _data[_offset++]; if (r >= 128) return (sbyte)(r - 256); else return (sbyte)r; } public short ReadShort() { byte b1 = _data[_offset++]; byte b2 = _data[_offset++]; if (b1 >= 128) return (short)(b1 * 256 + b2 - 65536); else return (short)(b1 * 256 + b2); } public short ReadUShort() { byte b1 = _data[_offset++]; return (short)(b1 * 256 + _data[_offset++]); } But I wonder if there's a faster way, not excluding the use of unsafe code, since this seems a little bit too much work for simple processing.

    Read the article

  • Mis-spelling in the .NET configuration system, a design flaw?

    - by smwikipedia
    I just wrote some .NET code to get connection string from the config file. The config file is as below: <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="key1" value="hello,world!"/> </appSettings> <connectionStrings> <add name="conn1" connectionString="abcd"/> </connectionStrings> </configuration> .NET Framework provide the following types to get the connection string: 1- ConnectionStringsSection : stands for the config section containing several connection strings 2- ConnectionStringSettingsCollection : stands for the connection string collection 3- ConnectionStringSettings : stands for a certain connection string. .NET Framework also provide the following types to get the App Settings: 4- AppSettingsSection 5- KeyValueConfigurationCollection 6- KeyValueConfigurationElement Compare 2 to 5, 3 to 6, why are there extra "s" in ConnectionStringSetting[s]Collection and ConnectionStringSetting[s]? This mis-spelling is really mis-leading. I think it's a design flaw. Has anyone noticed that?

    Read the article

  • File writing problem on Windows 7 Professional in c#

    - by Ummar
    I have an application in C# which I write some data to file. I am facing the problem on windows 7 professional that when I write data to C:\ProgramData, Access denied acception is thrown. If I login from an administrator account this issue vanishes, and if I login from some other account who have administrative previlages this issue comes up. This issue is only produces on windows 7 professional, it is working fine on all other flavors of windows 7 as well as windows vista. try { XmlTextWriter myXmlTextWriter = new XmlTextWriter("Configuration.xml", null); myXmlTextWriter.Formatting = Formatting.Indented; myXmlTextWriter.WriteStartDocument(true); myXmlTextWriter.WriteDocType("ApplicationConfigurations", null, null, null); ////myXmlTextWriter.WriteComment("This file represents another fragment of a book store inventory database"); myXmlTextWriter.WriteStartElement("Configuration"); myXmlTextWriter.WriteElementString("firstElement", pe.ToString()); myXmlTextWriter.WriteEndElement(); myXmlTextWriter.WriteEndDocument(); myXmlTextWriter.Flush(); myXmlTextWriter.Close(); }catch(Exception e) { //Exception is thrown in Win7 professional }

    Read the article

  • how to do validations when composing object of a class in other class ?

    - by haansi
    Hi, I have an IPAddress class which has one property named ip and in its setter I am validating data coming and if data is invalid it throws an error. (Its code is as the following): private string ip; public string IP { get { return ip; } set { string PartsOfIP = value.Split('.'); if (PartsOfIP.Length == 4) { foreach (string part in PartsOfIP) { int a = 0; bool result = int.TryParse(part, out a); if (result != true) { throw new Exception("Invalid IP"); } else { ip = value; } } } else { throw new Exception("Invalid IP"); } } In User Class I want to compose an object of IPAddress class. I am doing validations for properties of User in User class and validations of Ip in IPAddress class. My question is how I will compose IPAddress object in UserClass and what will be syntax for this ? If I again mention get and set here with IPAddress object in User class will my earlier mentioned (in IPAddress class) getter and setter work ? plz advice me in details thanks

    Read the article

  • Passing bundle to activity set as singletask

    - by Falmarri
    So I have a MapActivity that runs an asynchtask that occasionally updates what exactly it's displaying on the map (via a string). I originally pass this string in from the intent when the activity is first created. And then if you click on one of the drawables on the map, it opens a new activity, which can then create a new mapview (same class) with a different string setting. The problem I have is that I only want one instance of the mapview to be running at once. Thus I set android:launchmode="singletask" in the manifest. This works in that it brings the mapactivity to the front, but is there any way to send it a new intent bundle to get a new setting for the string it needs? I tried regetting the extras from the bundle, but it seems to retain the old bundle, not the new intent that was passed to it. I'm not sure I want to do startActivityForResult because the 2nd activity may or may not want to update the original activity. I hope that made sense. I can post code if necessary, but I think that should explain my situation.

    Read the article

  • C++ STL: How to write wrappers for cout, cerr, cin and endl?

    - by Ashwin
    I do not like using namespace std, but I am also tired of having to type std:: in front of every cout, cin, cerr and endl. So, I thought of giving them shorter new names like this: // STLWrapper.h #include <iostream> #include <string> extern std::ostream& Cout; extern std::ostream& Cerr; extern std::istream& Cin; extern std::string& Endl; // STLWrapper.cpp #include "STLWrapper.h" std::ostream& Cout = std::cout; std::ostream& Cerr = std::cerr; std::istream& Cerr = std::cin; std::string _EndlStr("\n"); std::string& Endl = _EndlStr; This works. But, are there any problems in the above which I am missing? Is there a better way to achieve the same?

    Read the article

  • help configuring a mail server for use with mail.jar and activation.jar

    - by bobbyblue
    im trying to work with the below code: import javax.servlet.*; import javax.servlet.http.*; import java.io.*; import javax.mail.*; import javax.mail.internet.*; // important import javax.mail.event.*; // important import java.net.*; import java.util.*; public class servletmail extends HttpServlet { public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException { PrintWriter out=response.getWriter(); response.setContentType("text/html"); try { Properties props=new Properties(); props.put("mail.smtp.host","localhost"); // 'localhost' for testing Session session1 = Session.getDefaultInstance(props,null); String s1 = request.getParameter("text1"); //sender (from) String s2 = request.getParameter("text2"); String s3 = request.getParameter("text3"); String s4 = request.getParameter("area1"); Message message =new MimeMessage(session1); message.setFrom(new InternetAddress(s1)); message.setRecipients (Message.RecipientType.TO,InternetAddress.parse(s2,false)); message.setSubject(s3); message.setText(s4); Transport.send(message); out.println("mail has been sent"); } catch(Exception ex) { System.out.println("ERROR....."+ex); } } } im using mail.jar and activation.jar but i cant understand how shouls i configure it with a mail server which mail server should i use will i be able to send an email using above what are the requirements a mail server? how should i configure it

    Read the article

  • Using an empty column as a divider in a JTable.

    - by Catalina Island
    I'm trying to use an empty column as a divider between pairs of columns in a JTable. Here's a picture and code for what I have so far. I know I can change the look using a custom TableCellRenderer. Before I go down that road, is there a better way to do this? Any ideas appreciated. import javax.swing.*; import javax.swing.table.*; public class TablePanel extends JPanel { public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { @Override public void run() { JFrame f = new JFrame("TablePanel"); f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); f.add(new TablePanel()); f.pack(); f.setVisible(true); } }); } public TablePanel() { TableModel dataModel = new MyModel(); JTable table = new JTable(dataModel); table.getColumnModel().getColumn(MyModel.DIVIDER).setMaxWidth(0); JScrollPane jsp = new JScrollPane(table); jsp.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS); this.add(jsp); } private static class MyModel extends AbstractTableModel { private static final int DIVIDER = 2; private final String[] names = { "A1", "A2", "", "B1", "B2" }; @Override public int getRowCount() { return 32; } @Override public int getColumnCount() { return names.length; } @Override public String getColumnName(int col) { if (col == DIVIDER) return ""; return names[col]; } @Override public Object getValueAt(int row, int col) { if (col == DIVIDER) return ""; return (row + 1) / 10.0; } @Override public Class<?> getColumnClass(int col) { if (col == DIVIDER) return String.class; return Number.class; } } }

    Read the article

  • How do I check if a scalar has a compiled regex in it with Perl?

    - by Robert P
    Let's say I have a subroutine/method that a user can call to test some data that (as an example) might look like this: sub test_output { my ($self, $test) = @_; my $output = $self->long_process_to_get_data(); if ($output =~ /\Q$test/) { $self->assert_something(); } else { $self->do_something_else(); } } Normally, $test is a string, which we're looking for anywhere in the output. This was an interface put together to make calling it very easy. However, we've found that sometimes, a straight string is problematic - for example, a large, possibly varying number of spaces...a pattern, if you will. Thus, I'd like to let them pass in a regex as an option. I could just do: $output =~ $test if I could assume that it's always a regex, but ah, but the backwards compatibility! If they pass in a string, it still needs to test it like a raw string. So in that case, I'll need to test to see if $test is a regex. Is there any good facility for detecting whether or not a scalar has a compiled regex in it?

    Read the article

  • Porting Perl to C++ `print "\x{2501}" x 12;`

    - by jippie
    I am porting a program from Perl to C++ as a learning objective. I arrived at a routine that draws a table with commands like the following: Perl: print "\x{2501}" x 12; And it draws 12 times a '?' ("box drawings heavy horizontal"). Now I figured out part of the problem already: Perl: \x{}, \x00 Hexadecimal escape sequence; C++: \unnnn To print a single Unicode character: C++: printf( "\u250f\n" ); But does C++ have a smart equivalent for the 'x' operator or would it come down to a for loop? UPDATE Let me include the full source code I am trying to compile with the proposed solution. The compiler does throw an errors: g++ -Wall -Werror project.cpp -o project project.cpp: In function ‘int main(int, char**)’: project.cpp:38:3: error: ‘string’ is not a member of ‘std’ project.cpp:38:15: error: expected ‘;’ before ‘s’ project.cpp:39:3: error: ‘cout’ is not a member of ‘std’ project.cpp:39:16: error: ‘s’ was not declared in this scope #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <string.h> int main ( int argc, char *argv[] ) { if ( argc != 2 ) { fprintf( stderr , "usage: %s matrix\n", argv[0] ); exit( 2 ); } else { //std::string s(12, "\u250f" ); std::string s(12, "u" ); std::cout << s; } }

    Read the article

  • Managing a log stream in C++ in a cout-like notation

    - by Andry
    Hello! I have a class in c++ in order to write log files for an application of mine. I have already built the class and it works, it is something like this: class Logger { std::string _filename; public: void print(std::string tobeprinted); } Well, it is intuitive that, in order to print a line in the log file, for an object of Logger, it is simply necessary to do the following: Logger mylogger("myfile.log"); mylogger.print(std::string("This is a log line")); Well. Using a method approach is not the same as using a much better pattern like << is. I would like to do the following: Logger mylogger("myfile.log"); mylogger << "This is a log line"; That's all. I suppose I must overload the << operator... But overloading using this signature (the classic one): ostream& operator<<(ostream& output, const MyObj& o); But I do not have a ostream... So, should I do as follows? Logger& operator<<(Logger& output, const std::string& o); Is this the right way? Thanks

    Read the article

  • Image rotate opecv error

    - by avd
    When I use this code to rotate the image, the destination image size remains same and hence the image gets clipped. Please provide me a way/code snippet to resize accordingly (like matlab does in imrotate) so that image does not get clipped and outlier pixels gets filled with all white instead of black. void imrotate(std::string imgPath,std::string angleStr,std::string outPath) { size_t found1,found2; found1=imgPath.find_last_of('/'); found2=imgPath.size()-4; IplImage* src=cvLoadImage(imgPath.c_str(), -1);; IplImage* dst; dst = cvCloneImage( src ); int angle = atoi(angleStr.c_str()); CvMat* rot_mat = cvCreateMat(2,3,CV_32FC1); CvPoint2D32f center = cvPoint2D32f( src->width/2, src->height/2 ); double scale = 1; cv2DRotationMatrix( center, angle, scale, rot_mat ); cvWarpAffine( src, dst, rot_mat); char angStr[4]; sprintf(angStr,"%d",angle); cvSaveImage(string(outPath+imgPath.substr(found1+1,found2-found1-1)+"_"+angStr+".jpg").c_str(),dst); cvReleaseImage(&src); cvReleaseImage(&dst); cvReleaseMat( &rot_mat ); } Original Image: Rotated Image:

    Read the article

  • Porting Python algorithm to C++ - different solution

    - by cb0
    Hello, I have written a little brute string generation script in python to generate all possible combinations of an alphabet within a given length. It works quite nice, but for the reason I wan't it to be faster I try to port it to C++. The problem is that my C++ Code is creating far too much combination for one word. Heres my example in python: ./test.py gives me aaa aab aac aad aa aba .... while ./test (the c++ programm gives me) aaa aaa aaa aaa aa Here I also get all possible combinations, but I get them twice ore more often. Here is the Code for both programms: #!/usr/bin/env python import sys #Brute String Generator #Start it with ./brutestringer.py 4 6 "abcdefghijklmnopqrstuvwxyz1234567890" "" #will produce all strings with length 4 to 6 and chars from a to z and numbers 0 to 9 def rec(w, p, baseString): for c in "abcd": if (p<w - 1): rec(w, p + 1, baseString + "%c" % c) print baseString for b in range(3,4): rec(b, 0, "") And here the C++ Code #include <iostream> using namespace std; string chars="abcd"; void rec(int w,int b,string p){ unsigned int i; for(i=0;i<chars.size();i++){ if(b < (w-1)){ rec(w, (b+1), p+chars[i]); } cout << p << "\n"; } } int main () { int a=3, b=0; rec (a+1,b, ""); return 0; } Does anybody see my fault ? I don't have much experience with C++. Thanks indeed

    Read the article

  • Validating a phone number in Android PreferenceScreen

    - by djechelon
    I have a PreferenceScreen in which the user is capable, if system can't autodetect it, to enter the device's phone number. I'm still learning this part of Android but I managed to understand a bit of PreferenceScreens by examples provided by Android SDK itself and a few tutorials. What I want is that the user can save the phone number only if null or valid, where by "valid" I mean running a generic validation logic (ie. an anonymous method that returns true or false, that can be reused in any possible situation*) or better, just to simplify things, ^(\+39)?3[0-9]{9}$ For now I have the following XML snip <EditTextPreference android:inputType="phone" android:key="@string/preference_phoneNo" android:selectAllOnFocus="true" android:singleLine="true" android:summary="@string/pref_phoneNumber_description" android:title="@string/pref_phoneNumber" /> and following code by courtesy of Eclipse New Activity wizard: private void setupSimplePreferencesScreen() { if (!isSimplePreferences(this)) { return; } addPreferencesFromResource(R.xml.pref_general); bindPreferenceSummaryToValue(findPreference(getString(R.string.preference_phoneNo))); } addPreferenceFromResource is supposed to load the XML node and add the preference to the screen, while binPreferenceSummaryToValue is supposed to make description text change when preference is updated. Just for sake of completeness for those who don't like code courtesy of the IDE, the second method is provided by Eclipse who also provides a private class in the code file that is /** * A preference value change listener that updates the preference's summary * to reflect its new value. */ In the general case, what should I do to perform validation logic before the preference gets saved when I click OK on the preference editor? Where is the validation logic to be put in a PreferenceScreen? *Aren't we all here to learn?

    Read the article

  • Loop through Array with conditional output based on key/value pair

    - by Daniel C
    I have an array with the following columns: Task Status I would like to print out a table that shows a list of the Tasks, but not the Status column. Instead, for Tasks where the Status = 0, I want to add a tag <del> to make the completed task be crossed out. Here's my current code: foreach ($row as $key => $val){ if ($key != 'Status') print "<td>$val</td>"; else if ($val == '0') print "<td><del>$val</del></td>"; } This seems to be correct, but when I print it out, it prints all the tasks with the <del> tag. So basically the "else" clause is being run every time. Here is the var_dump($row): array 'Task' => string 'Task A' (length=6) 'Status' => string '3' (length=1) array 'Task' => string 'Task B' (length=6) 'Status' => string '0' (length=1)

    Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >