Search Results

Search found 17651 results on 707 pages for 'unix domain sockets'.

Page 512/707 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

  • Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

    - by Akshay Deep Lamba
    Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

    Read the article

  • What does your Python development workbench look like?

    - by Fabian Fagerholm
    First, a scene-setter to this question: Several questions on this site have to do with selection and comparison of Python IDEs. (The top one currently is What IDE to use for Python). In the answers you can see that many Python programmers use simple text editors, many use sophisticated text editors, and many use a variety of what I would call "actual" integrated development environments – a single program in which all development is done: managing project files, interfacing with a version control system, writing code, refactoring code, making build configurations, writing and executing tests, "drawing" GUIs, and so on. Through its GUI, an IDE supports different kinds of workflows to accomplish different tasks during the journey of writing a program or making changes to an existing one. The exact features vary, but a good IDE has sensible workflows and automates things to let the programmer concentrate on the creative parts of writing software. The non-IDE way of writing large programs relies on a collection of tools that are typically single-purpose; they do "one thing well" as per the Unix philosophy. This "non-integrated development environment" can be thought of as a workbench, supported by the OS and generic interaction through a text or graphical shell. The programmer creates workflows in their mind (or in a wiki?), automates parts and builds a personal workbench, often gradually and as experience accumulates. The learning curve is often steeper than with an IDE, but those who have taken the time to do this can often claim deeper understanding of their tools. (Whether they are better programmers is not part of this question.) With advanced editor-platforms like Emacs, the pieces can be integrated into a whole, while with simpler editors like gedit or TextMate, the shell/terminal is typically the "command center" to drive the workbench. Sometimes people extend an existing IDE to suit their needs. What does your Python development workbench look like? What workflows have you developed and how do they work? For the first question, please give the main "driving" program – the one that you use to control the rest (Emacs, shell, etc.) the "small tools" -- the programs you reach for when doing different tasks For the second question, please describe what the goal of the workflow is (eg. "set up a new project" or "doing initial code design" or "adding a feature" or "executing tests") what steps are in the workflow and what commands you run for each step (eg. in the shell or in Emacs) Also, please describe the context of your work: do you write small one-off scripts, do you do web development (with what framework?), do you write data-munching applications (what kind of data and for what purpose), do you do scientific computing, desktop apps, or something else? Note: A good answer addresses the perspectives above – it doesn't just list a bunch of tools. It will typically be a long answer, not a short one, and will take some thinking to produce; maybe even observing yourself working.

    Read the article

  • VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

    - by George Marian
    Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

    Read the article

  • JavaScript in different browsers

    - by PointsToShare
    Adventures with JavaScript rendered in IE 8, Chrome 15, and Firefox 8.0 I have written a little monogram about the advantages of Math and wrote a few JavaScript applications to demonstrate them. I was a bit careless and used elements on the page in my JavaScript without using any of the GetElementsByXXXX methods to identify them.  Say I had a text box named tbSeqNum into which I entered a number to be used in a computation. In my code I simply referred to its value by using it directly. Like here: Function Blah() {                 return tbSeqNum.value; } This ran fine in IE8. In IE, the elements are available as global variables. This is not the case in either Firefox or Chrome. In there one has to create the variable and only then use it. Assuming I also used tbSeqNum as the element’s ID, this works: Function Blah() {                 return GetElementById(“tbSeqNum”).value; } Naturally this corrected function also works in IE, so be warned. Also, coming from windows programming (I am long in the tooth and programmed long before the internet), I have a habit of putting an “Exit” button on my pages and setting their onclick to: onclick=”window.close()”. Again, this works fine in IE. In Firefox and chrome, it does not! There you can only close a window that you opened in the code. A window that was opened by navigation to a URL will not close.  Before I deployed mu code to my website, I painfully removed all my Exit buttons. But my greatest surprise came when I tested my pages in the various browsers. In my code I do a comparison on the performance of two algorithms used to solve the same problem. One is brute force, the other uses a mathematical formula. The compare functions runs each many times and displays the time it took for each and also the ratio. Chrome runs JavaScript between 5 and 10 times faster than Firefox and between 50 and 100 times faster that IE. Wow!!! This difference is especially remarkable when the code uses iteration. I suspect that the JS engines in Chrome and Firefox simply cache the result of a function and if it is called again with the same parameters, it returns the cached result. To see it in action play run the “How Many Squares” page in www.mgsltns.com/games.htm The host is running on Unix, so the link is case sensitive. Last Note: IE9 runs JS a bit faster, but still lags behind almost as badly. That’s All Folks!

    Read the article

  • Cross-platform independent development

    - by Joe Wreschnig
    Some years ago, if you wrote in C and some subset of C++ and used a sufficient number of platform abstractions (via SDL or whatever), you could run on every platform an indie could get on - Linux, Windows, Mac OS of various versions, obscure stuff like BeOS, and the open consoles like the GP2X and post-death Dreamcast. If you got a contract for a closed platform at some point, you could port your game to that platform with "minimal" code changes as well. Today, indie developers must use XNA to get on the Xbox 360 (and upcoming Windows phone); must not use XNA to work anywhere else but Windows; until recently had to use Java on Android; Flash doesn't run on phones, HTML5 doesn't work on IE. Unlike e.g. DirectX vs. OpenGL or Windows vs. Unix, these are changes to the core language you write your code in and can't be papered over without, basically, writing a compiler. You can move some game logic into scripts and include an interpreter - except when you can't, because the iPhone SDK doesn't allow it, and performance suffers because no one allows JIT. So what can you do if you want a really cross-platform portable game, or even just a significant body of engine and logic code? Is this not a problem because the platforms have fundamentally diverged - it's just plain not worthwhile to try to target both an iPhone and the Xbox 360 with any shared code because such a game would be bad? (I find this very unlikely. I can easily see wanting to share a game between a Windows Mobile phone and an Android, or an Xbox 360 and an iPad.) Are interfaces so high-level now that porting time is negligible? (I might believe this for business applications, but not for games with strict performance requirements.) Is this going to become more pronounced in the future? Is the split going to be, somewhat scarily, still down vendor lines? Will we all rely on high-level middleware like Flash or Unity to get anything cross-platform done? tl;dr - Is porting a problem, is it going to be a bigger problem in the future, and if so how do we solve it?

    Read the article

  • java+netbeans+mysql+ubuntu 64 bits LTS VS C#+MS SQL for fast develop trading system

    - by crunchor
    I am going to build a trading system and use with the broker "Interactive Broker" API. The API supports C++ Socket, Java Socket, DDE, Active X APIs in Windows. The API supports Java Socket API, Posix C++ Socket API in Unix kind like Ubuntu. My trading system has some real time long calculations to do and a lot of maths for backtest. I am using a retail trading program Amibroker which is written in C++ and I run it in windows xp 32 bits, it will take me days to do one serious backtest with my G620 Sandy Bridge CPU and 3GB of ram. So for my trading system, I need to have 1. speed, 2. stability, 3. fast development I have done some research, C++ is fastest but I am not good at it and it takes much longer time to develop. Other than C++, Java in linux has the best speed. I also did some research for database and look like mysql has the best speed. Mysql and PostgreSQL both are very popular open source sql db, which one should I choose? I see MySQL has Workbench now which looks like similar to MS SQL management studio so look like a good start. Netbeans should be the most popular Java IDE now and seem like its GUI design can be as easy as Virtual Studio now. I am not sure if made by Netbeans would affect the speed and if its GUI design is really that good and easy to use. Ubuntu 64 bits LTS has good long term support, good community support, and stable. I will buy a new computer if I can create a good trading system for live trading and backtest. Very likely I will buy a I7 or I5 depends on if I7 can really have better speed for my case. Actually I mainly deal with C# in my jobs and I just knew java but not good at java. What would you guys recommend? Any better solution? This will be a big project and very likely life long project for me so I seriously do research including asking you guys before I start and focus on what I should, thanks!

    Read the article

  • Oracle ODP.NET und Windows PowerShell

    - by cjandaus
    In der Microsoft Welt wohlbekannt, in der Oracle Welt nur ein Schulterzucken hervorrufend - die sogenannten Scripting Guys. Wie der Name bereits vermuten lässt, geht es in deren Hey, Scripting Guy! Blog um Scripting. Und damit natürlich um die Windows PowerShell. Ja, die Zeiten des DOS-Kommandofensters und Batch-Dateien ist vorbei. Die PowerShell ist eine mächtige Scripting-Umgebung unter Windows, die selbst unter Unix/Linux-Administratoren Gefallen finden sollte. Dass man damit wunderbar auch auf Oracle Datenbanken zugreifen kann, haben wir bereits vor Jahren in einer Oracle Workshop Reihe bewiesen. Damals begleitete mich Klaus Rohe von Microsoft, der mit mir dann auch gemeinsam einen Vortrag auf DOAG Konferenz hielt. Unser gemeinsames Ziel war es damals wie heute, die Oracle Anwender von der hervorragenden Integration zwischen Oracle, Windows und .NET zu überzeugen. Was lag näher, als sich dies von beiden Herstellern gemeinsam bestätigen zu lassen? Vor allem die ewigen Zweifler begrüßten dies. Seither war die PowerShell bei mir nicht mehr auf dem Radar und auch Oracle Anwender haben das Thema nicht mehr aufgeworfen. Möglicherweise auch deshalb, weil es zu neu oder zu unbekannt ist? Eher unwahrscheinlich ... Vielleicht liegt es vielmehr daran, dass man einfach mal davon ausgeht, dass PowerShell nur für Microsoft Produkte richtig nutzbar ist? Oder man bekommt erzählt, dass nur die Integration mit der Microsoft-eigenen Datenbank SQL Server möglich ist? Und das ist natürlich nicht richtig - so wie immer (ich denke dabei unter anderem an das Microsoft Active Directory - aber dazu ein andermal mehr). Umso mehr freut es mich, einen brandneuen Blog-Beitrag zu genau diesem Thema zu lesen, auf den mich Alex Keh, (Produkt Manager für Windows und .NET im Oracle Headquarter in San Francisco) aufmerksam gemacht hat. Was die Sache noch besser macht, dieser Beitrag stammt aus der Microsoft Welt und belegt damit zwischen den Zeilen, dass die Oracle Datenbank und unsere .NET Integration via dem Oracle Data Provider for .NET (ODP.NET) auch hier eine bedeutende Rolle spielt. In diesem Sinne: Beide Daumen hoch für die Scripting Guys! Der Beitrag nennt sich Use Oracle ODP.NET and PowerShell to Simplify Data Access und trotz ein paar weniger Ausreißer, ist der Artikel sehr zu empfehlen, um in das Thema einzusteigen. Lassen Sie es mich wissen, wie Sie zu dieser Integration stehen, ob die PowerShell für Sie in der Praxis wichtig ist oder werden könnte, und falls Sie Features vermissen, die Oracle künftig umsetzen sollte. Danke!

    Read the article

  • Curing the Database-Application mismatch

    - by Phil Factor
    If an application requires access to a database, then you have to be able to deploy it so as to be version-compatible with the database, in phase. If you can deploy both together, then the application and database must normally be deployed at the same version in which they, together, passed integration and functional testing.  When a single database supports more than one application, then the problem gets more interesting. I’ll need to be more precise here. It is actually the application-interface definition of the database that needs to be in a compatible ‘version’.  Most databases that get into production have no separate application-interface; in other words they are ‘close-coupled’.  For this vast majority, the whole database is the application-interface, and applications are free to wander through the bowels of the database scot-free.  If you’ve spurned the perceived wisdom of application architects to have a defined application-interface within the database that is based on views and stored procedures, any version-mismatch will be as sensitive as a kitten.  A team that creates an application that makes direct access to base tables in a database will have to put a lot of energy into keeping Database and Application in sync, to say nothing of having to tackle issues such as security and audit. It is not the obvious route to development nirvana. I’ve been in countless tense meetings with application developers who initially bridle instinctively at the apparent restrictions of being ‘banned’ from the base tables or routines of a database.  There is no good technical reason for needing that sort of access that I’ve ever come across.  Everything that the application wants can be delivered via a set of views and procedures, and with far less pain for all concerned: This is the application-interface.  If more than zero developers are creating a database-driven application, then the project will benefit from the loose-coupling that an application interface brings. What is important here is that the database development role is separated from the application development role, even if it is the same developer performing both roles. The idea of an application-interface with a database is as old as I can remember. The big corporate or government databases generally supported several applications, and there was little option. When a new application wanted access to an existing corporate database, the developers, and myself as technical architect, would have to meet with hatchet-faced DBAs and production staff to work out an interface. Sure, they would talk up the effort involved for budgetary reasons, but it was routine work, because it decoupled the database from its supporting applications. We’d be given our own stored procedures. One of them, I still remember, had ninety-two parameters. All database access was encapsulated in one application-module. If you have a stable defined application-interface with the database (Yes, one for each application usually) you need to keep the external definitions of the components of this interface in version control, linked with the application source,  and carefully track and negotiate any changes between database developers and application developers.  Essentially, the application development team owns the interface definition, and the onus is on the Database developers to implement it and maintain it, in conformance.  Internally, the database can then make all sorts of changes and refactoring, as long as source control is maintained.  If the application interface passes all the comprehensive integration and functional tests for the particular version they were designed for, nothing is broken. Your performance-testing can ‘hang’ on the same interface, since databases are judged on the performance of the application, not an ‘internal’ database process. The database developers have responsibility for maintaining the application-interface, but not its definition,  as they refactor the database. This is easily tested on a daily basis since the tests are normally automated. In this setting, the deployment can proceed if the more stable application-interface, rather than the continuously-changing database, passes all tests for the version of the application. Normally, if all goes well, a database with a well-designed application interface can evolve gracefully without changing the external appearance of the interface, and this is confirmed by integration tests that check the interface, and which hopefully don’t need to be altered at all often.  If the application is rapidly changing its ‘domain model’  in the light of an increased understanding of the application domain, then it can change the interface definitions and the database developers need only implement the interface rather than refactor the underlying database.  The test team will also have to redo the functional and integration tests which are, of course ‘written to’ the definition.  The Database developers will find it easier if these tests are done before their re-wiring  job to implement the new interface. If, at the other extreme, an application receives no further development work but survives unchanged, the database can continue to change and develop to keep pace with the requirements of the other applications it supports, and needs only to take care that the application interface is never broken. Testing is easy since your automated scripts to test the interface do not need to change. The database developers will, of course, maintain their own source control for the database, and will be likely to maintain versions for all major releases. However, this will not need to be shared with the applications that the database servers. On the other hand, the definition of the application interfaces should be within the application source. Changes in it have to be subject to change-control procedures, as they will require a chain of tests. Once you allow, instead of an application-interface, an intimate relationship between application and database, we are in the realms of impedance mismatch, over and above the obvious security problems.  Part of this impedance problem is a difference in development practices. Whereas the application has to be regularly built and integrated, this isn’t necessarily the case with the database.  An RDBMS is inherently multi-user and self-integrating. If the developers work together on the database, then a subsequent integration of the database on a staging server doesn’t often bring nasty surprises. A separate database-integration process is only needed if the database is deliberately built in a way that mimics the application development process, but which hampers the normal database-development techniques.  This process is like demanding a official walking with a red flag in front of a motor car.  In order to closely coordinate databases with applications, entire databases have to be ‘versioned’, so that an application version can be matched with a database version to produce a working build without errors.  There is no natural process to ‘version’ databases.  Each development project will have to define a system for maintaining the version level. A curious paradox occurs in development when there is no formal application-interface. When the strains and cracks happen, the extra meetings, bureaucracy, and activity required to maintain accurate deployments looks to IT management like work. They see activity, and it looks good. Work means progress.  Management then smile on the design choices made. In IT, good design work doesn’t necessarily look good, and vice versa.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #034

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 UDF – User Defined Function to Strip HTML – Parse HTML – No Regular Expression The UDF used in the blog does fantastic task – it scans entire HTML text and removes all the HTML tags. It keeps only valid text data without HTML task. This is one of the quite commonly requested tasks many developers have to face everyday. De-fragmentation of Database at Operating System to Improve Performance Operating system skips MDF file while defragging the entire filesystem of the operating system. It is absolutely fine and there is no impact of the same on performance. Read the entire blog post for my conversation with our network engineers. Delay Function – WAITFOR clause – Delay Execution of Commands How do you delay execution of the commands in SQL Server – ofcourse by using WAITFOR keyword. In this blog post, I explain the same with the help of T-SQL script. Find Length of Text Field To measure the length of TEXT fields the function is DATALENGTH(textfield). Len will not work for text field. As of SQL Server 2005, developers should migrate all the text fields to VARCHAR(MAX) as that is the way forward. Retrieve Current Date Time in SQL Server CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} There are three ways to retrieve the current datetime in SQL SERVER. CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} Explanation and Comparison of NULLIF and ISNULL An interesting observation is NULLIF returns null if it comparison is successful, whereas ISNULL returns not null if its comparison is successful. In one way they are opposite to each other. Here is my question to you - How to create infinite loop using NULLIF and ISNULL? If this is even possible? 2008 Introduction to SERVERPROPERTY and example SERVERPROPERTY is a very interesting system function. It returns many of the system values. I use it very frequently to get different server values like Server Collation, Server Name etc. SQL Server Start Time We can use DMV to find out what is the start time of SQL Server in 2008 and later version. In this blog you can see how you can do the same. Find Current Identity of Table Many times we need to know what is the current identity of the column. I have found one of my developers using aggregated function MAX () to find the current identity. However, I prefer following DBCC command to figure out current identity. Create Check Constraint on Column Some time we just need to create a simple constraint over the table but I have noticed that developers do many different things to make table column follow rules than just creating constraint. I suggest constraint is a very useful concept and every SQL Developer should pay good attention to this subject. 2009 List Schema Name and Table Name for Database This is one of the blog post where I straight forward display script. One of the kind of blog posts, which I still love to read and write. Clustered Index on Separate Drive From Table Location A table devoid of primary key index is called heap, and here data is not arranged in a particular order, which gives rise to issues that adversely affect performance. Data must be stored in some kind of order. If we put clustered index on it then the order will be forced by that index and the data will be stored in that particular order. Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. 2010 Data Pages in Buffer Pool – Data Stored in Memory Cache One of my earlier year article, which I still read it many times and point developers to read it again. It is clear from the Resultset that when more than one index is used, datapages related to both or all of the indexes are stored in Memory Cache separately. TRANSACTION, DML and Schema Locks Can you create a situation where you can see Schema Lock? Well, this is a very simple question, however during the interview I notice over 50 candidates failed to come up with the scenario. In this blog post, I have demonstrated the situation where we can see the schema lock in database. 2011 Solution – Puzzle – Statistics are not updated but are Created Once In this example I have created following situation: Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Auto Update Statistics and Auto Create Statistics for database is TRUE Now I have requested two things in the example 1) Why this is happening? 2) How to fix this issue? Selecting Domain from Email Address This is a straight to script blog post where I explain how to select only domain name from entire email address. Solution – Generating Zero Without using Any Numbers in T-SQL How to get zero digit without using any digit? This is indeed a very interesting question and the answer is even interesting. Try to come up with answer in next 10 minutes and if you can’t come up with the answer the blog post read this post for solution. 2012 Simple Explanation and Puzzle with SOUNDEX Function and DIFFERENCE Function In simple words - SOUNDEX converts an alphanumeric string to a four-character code to find similar-sounding words or names. DIFFERENCE function returns an integer value. The  integer returned is the number of characters in the SOUNDEX values that are the same. Read Only Files and SQL Server Management Studio (SSMS) I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. Identifying Column Data Type of uniqueidentifier without Querying System Tables How do I know if any table has a uniqueidentifier column and what is its value without using any DMV or System Catalogues? Only information you know is the table name and you are allowed to return any kind of error if the table does not have uniqueidentifier column. Read the blog post to find the answer. Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue Interesting question – “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it?” Importing CSV File Into Database – SQL in Sixty Seconds #018 – Video Here is interesting small 60 second video on how to import CSV file into Database. ColumnStore Index – Batch Mode vs Row Mode Here is the logic behind when Columnstore Index uses Batch Mode and when it uses Row Mode. A batch typically represents about 1000 rows of data. Batch mode processing also uses algorithms that are optimized for the multicore CPUs and increased memory throughput. Follow up – Usage of $rowguid and $IDENTITY This is an excellent follow up blog post of my earlier blog post where I explain where to use $rowguid and $identity.  If you do not know the difference between them, this is a blog with a script example. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • PowerShell Script to Enumerate SharePoint 2010 or 2013 Permissions and Active Directory Group Membership

    - by Brian T. Jackett
    Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/07/01/powershell-script-to-enumerate-sharepoint-2010-or-2013-permissions-and.aspx   In this post I will present a script to enumerate SharePoint 2010 or 2013 permissions across the entire farm down to the site (SPWeb) level.  As a bonus this script also recursively expands the membership of any Active Directory (AD) group including nested groups which you wouldn’t be able to find through the SharePoint UI.   History     Back in 2009 (over 4 years ago now) I published one my most read blog posts about enumerating SharePoint 2007 permissions.  I finally got around to updating that script to remove deprecated APIs, supporting the SharePoint 2010 commandlets, and fixing a few bugs.  There are 2 things that script did that I had to remove due to major architectural or procedural changes in the script. Indenting the XML output Ability to search for a specific user    I plan to add back the ability to search for a specific user but wanted to get this version published first.  As for indenting the XML that could be added but would take some effort.  If there is user demand for it (let me know in the comments or email me using the contact button at top of blog) I’ll move it up in priorities.    As a side note you may also notice that I’m not using the Active Directory commandlets.  This was a conscious decision since not all environments have them available.  Instead I’m relying on the older [ADSI] type accelerator and APIs.  It does add a significant amount of code to the script but it is necessary for compatibility.  Hopefully in a few years if I need to update again I can remove that legacy code.   Solution    Below is the script to enumerate SharePoint 2010 and 2013 permissions down to site level.  You can also download it from my SkyDrive account or my posting on the TechNet Script Center Repository. SkyDrive TechNet Script Center Repository http://gallery.technet.microsoft.com/scriptcenter/Enumerate-SharePoint-2010-35976bdb   001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 ########################################################### #DisplaySPWebApp8.ps1 # #Author: Brian T. Jackett #Last Modified Date: 2013-07-01 # #Traverse the entire web app site by site to display # hierarchy and users with permissions to site. ########################################################### function Expand-ADGroupMembership {     Param     (         [Parameter(Mandatory=$true,                    Position=0)]         [string]         $ADGroupName,         [Parameter(Position=1)]         [string]         $RoleBinding     )     Process     {         $roleBindingText = ""         if(-not [string]::IsNullOrEmpty($RoleBinding))         {             $roleBindingText = " RoleBindings=`"$roleBindings`""         }         Write-Output "<ADGroup Name=`"$($ADGroupName)`"$roleBindingText>"         $domain = $ADGroupName.substring(0, $ADGroupName.IndexOf("\") + 1)         $groupName = $ADGroupName.Remove(0, $ADGroupName.IndexOf("\") + 1)                                     #BEGIN - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY         #http://www.microsoft.com/technet/scriptcenter/scripts/powershell/search/users/srch106.mspx         #GET AD GROUP FROM DIRECTORY SERVICES SEARCH         $strFilter = "(&(objectCategory=Group)(name="+($groupName)+"))"         $objDomain = New-Object System.DirectoryServices.DirectoryEntry         $objSearcher = New-Object System.DirectoryServices.DirectorySearcher         $objSearcher.SearchRoot = $objDomain         $objSearcher.Filter = $strFilter         # specify properties to be returned         $colProplist = ("name","member","objectclass")         foreach ($i in $colPropList)         {             $catcher = $objSearcher.PropertiesToLoad.Add($i)         }         $colResults = $objSearcher.FindAll()         #END - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY         foreach ($objResult in $colResults)         {             if($objResult.Properties["Member"] -ne $null)             {                 foreach ($member in $objResult.Properties["Member"])                 {                     $indMember = [adsi] "LDAP://$member"                     $fullMemberName = $domain + ($indMember.Name)                                         #if($indMember["objectclass"]                         # if child AD group continue down chain                         if(($indMember | Select-Object -ExpandProperty objectclass) -contains "group")                         {                             Expand-ADGroupMembership -ADGroupName $fullMemberName                         }                         elseif(($indMember | Select-Object -ExpandProperty objectclass) -contains "user")                         {                             Write-Output "<ADUser>$fullMemberName</ADUser>"                         }                 }             }         }                 Write-Output "</ADGroup>"     } } #end Expand-ADGroupMembership # main portion of script if((Get-PSSnapin -Name microsoft.sharepoint.powershell) -eq $null) {     Add-PSSnapin Microsoft.SharePoint.PowerShell } $farm = Get-SPFarm Write-Output "<Farm Guid=`"$($farm.Id)`">" $webApps = Get-SPWebApplication foreach($webApp in $webApps) {     Write-Output "<WebApplication URL=`"$($webApp.URL)`" Name=`"$($webApp.Name)`">"     foreach($site in $webApp.Sites)     {         Write-Output "<SiteCollection URL=`"$($site.URL)`">"                 foreach($web in $site.AllWebs)         {             Write-Output "<Site URL=`"$($web.URL)`">"             # if site inherits permissions from parent then stop processing             if($web.HasUniqueRoleAssignments -eq $false)             {                 Write-Output "<!-- Inherits role assignments from parent -->"             }             # else site has unique permissions             else             {                 foreach($assignment in $web.RoleAssignments)                 {                     if(-not [string]::IsNullOrEmpty($assignment.Member.Xml))                     {                         $roleBindings = ($assignment.RoleDefinitionBindings | Select-Object -ExpandProperty name) -join ","                         # check if assignment is SharePoint Group                         if($assignment.Member.XML.StartsWith('<Group') -eq "True")                         {                             Write-Output "<SPGroup Name=`"$($assignment.Member.Name)`" RoleBindings=`"$roleBindings`">"                             foreach($SPGroupMember in $assignment.Member.Users)                             {                                 # if SharePoint group member is an AD Group                                 if($SPGroupMember.IsDomainGroup)                                 {                                     Expand-ADGroupMembership -ADGroupName $SPGroupMember.Name                                 }                                 # else SharePoint group member is an AD User                                 else                                 {                                     # remove claim portion of user login                                     #Write-Output "<ADUser>$($SPGroupMember.UserLogin.Remove(0,$SPGroupMember.UserLogin.IndexOf("|") + 1))</ADUser>"                                     Write-Output "<ADUser>$($SPGroupMember.UserLogin)</ADUser>"                                 }                             }                             Write-Output "</SPGroup>"                         }                         # else an indivdually listed AD group or user                         else                         {                             if($assignment.Member.IsDomainGroup)                             {                                 Expand-ADGroupMembership -ADGroupName $assignment.Member.Name -RoleBinding $roleBindings                             }                             else                             {                                 # remove claim portion of user login                                 #Write-Output "<ADUser>$($assignment.Member.UserLogin.Remove(0,$assignment.Member.UserLogin.IndexOf("|") + 1))</ADUser>"                                                                 Write-Output "<ADUser RoleBindings=`"$roleBindings`">$($assignment.Member.UserLogin)</ADUser>"                             }                         }                     }                 }             }             Write-Output "</Site>"             $web.Dispose()         }         Write-Output "</SiteCollection>"         $site.Dispose()     }     Write-Output "</WebApplication>" } Write-Output "</Farm>"      The output from the script can be sent to an XML which you can then explore using the [XML] type accelerator.  This lets you explore the XML structure however you see fit.  See the screenshot below for an example.      If you do view the XML output through a text editor (Notepad++ for me) notice the format.  Below we see a SharePoint site that has a SharePoint group Demo Members with Edit permissions assigned.  Demo Members has an AD group corp\developers as a member.  corp\developers has a child AD group called corp\DevelopersSub with 1 AD user in that sub group.  As you can see the script recursively expands the AD hierarchy.   Conclusion    It took me 4 years to finally update this script but I‘m happy to get this published.  I was able to fix a number of errors and smooth out some rough edges.  I plan to develop this into a more full fledged tool over the next year with more features and flexibility (copy permissions, search for individual user or group, optional enumerate lists / items, etc.).  If you have any feedback, feature requests, or issues running it please let me know.  Enjoy the script!         -Frog Out

    Read the article

  • How (recipe) to build only one kernel module?

    - by Pro Backup
    I have a bug in a Linux kernel module that causes the stock Ubuntu 14.04 kernel to oops (crash). That is why I want to edit/patch the source of only that single kernel module to add some extra debug output. The kernel module in question is mvsas and not necessary to boot. For that reason I don't see any need to update any initrd images. I have read a lot of information (as shown below) and find the setup and build process confusion. I need two recipes: to setup/configure the build environment once steps to do after editing any source file of this kernel module (.c and .h) and converting that edit into a new kernel module (.ko) The sources that have been used are: build one kernel module - Google search http://www.linuxquestions.org/questions/linux-kernel-70/rebuilding-a-single-kernel-module-595116/ http://stackoverflow.com/questions/8744087/how-to-recompile-just-a-single-kernel-module http://www.pixelbeat.org/docs/rebuild_kernel_module.html How do I build a single in-tree kernel module? http://ubuntuforums.org/showthread.php?t=1153067 http://ubuntuforums.org/showthread.php?t=2112166 http://ubuntuforums.org/showthread.php?t=1115593 build one kernel module ubuntu - Google search 'make +single +kernel +module' - Ask Ubuntu 'make +kernel +module' - Ask Ubuntu My makefile results in: No rule to make target `arch/x86/tools/relocs.c', needed '"Invalid module format"' - Ask Ubuntu Driver installation: compiling source code for newer kernel Modprobe: 'Invalid nodule format', yet works after insmod "Symbol version dump" "is missing" - Google search http://stackoverflow.com/questions/9425523/should-i-care-that-the-symbol-version-dump-is-missing-how-do-i-get-one Where can I find the corresponding Module.symvers and .config files for 12.04.3 i386 server? "no symbol version for module_layout" when trying to load usbhid.ko Broken links inside Linux header file folder 'make modules_install' - Ask Ubuntu 'modules_install' - Ask Ubuntu Empty build directory in custom compiled kernel Not able to see pr_info output In which directory are the kernel source files and how can I recompile it? How can I compile and install that patched libata-eh.c file? 'modules_install +depmod' - Ask Ubuntu modules_install depmod - Google search "make modules_install" - Google search http://www.csee.umbc.edu/courses/undergraduate/CMSC421/fall02/burt/projects/howto_build_kernel.html http://unix.stackexchange.com/questions/20864/what-happens-in-each-step-of-the-linux-kernel-building-process https://wiki.ubuntu.com/KernelCustomBuild http://www.cyberciti.biz/tips/build-linux-kernel-module-against-installed-kernel-source-tree.html http://www.linuxforums.org/forum/kernel/170617-solved-make-modules_install-different-path.html "make prepare" - Google search "make prepare" "scripts/kconfig/conf --silentoldconfig Kconfig" - Google search http://ubuntuforums.org/showthread.php?t=1963515 ubuntu "make prepare" version - Google search http://stackoverflow.com/questions/8276245/how-to-compile-a-kernel-module-against-a-new-source https://help.ubuntu.com/community/Kernel/Compile How do I compile a kernel module? How to add a custom driver to my kernel? Compile and loading kernel module without compiling the kernel

    Read the article

  • Instructions on how to configure a WebLogic Cluster and use it with Oracle Http Server

    - by Laurent Goldsztejn
    On October 17th I delivered a webcast on WebLogic Clustering that included a demo with Apache as the proxy server.  I realized that many steps are needed to set up the configuration I used during the demo.  The purpose of this article is to go through these steps to show how quickly and easily one can define a new cluster and then proxy requests via an Oracle Http Server (OHS). The domain configuration wizard offers the option to create a cluster.  The administration console or WLST, the Weblogic scripting tool can also be used to define a new cluster.  It can be created at any time but the servers that will participate in it cannot be in a running state. Cluster Creation using the configuration wizard Network and architecture requirements need to be considered while choosing between unicast and multicast. Multicast Vs. Unicast with WebLogic Clustering is of great help to make the best decision between the two messaging modes.  In addition, Configure Cluster offers details on each single field displayed above. After this initial configuration page, individual servers could be assigned to this newly created cluster although servers can be added later to the cluster.  What is not recommended is for the Admin server to participate in a cluster as the main purpose of the Admin server is to perform the bulk of the processing for the domain.  Servers need to stop before being assigned to a cluster.  There is also no minimum number of servers that have to participate in the cluster. At this point the configuration should be done and the cluster created successfully.  This can easily be verified from the console. Each clustered managed server can be launched to join the cluster.   At startup the following messages should be logged for each clustered managed server: <Notice> <WeblogicServer> <BEA-000365> <Server state changed to STARTING> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using messaging_mode cluster messaging> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_name>  It's time to try sending requests to the cluster and we will do this with the help of Oracle Http Server to play the role of a proxy server to demonstrate load balancing.  Proxy Server configuration  The first step is to download Weblogic Server Web Server Plugin that will enhance the web server by handling requests aimed at being sent to the Weblogic cluster.  For our test Oracle Http Server (OHS) will be used.  However plug-ins are also available for Apache Http server, Microsoft Internet Information Server (IIS), Oracle iPlanet Webserver or even WebLogic Server with the HttpClusterServlet. Once OHS is installed on the system, the configuration file, mod_wl_ohs.conf, will need to be altered to include Weblogic proxy specifics. First of all, add the following directive to instruct Apache to load the Weblogic shared object module extracted from the plugins file just downloaded. LoadModule weblogic_module modules/mod_wl_ohs.so and then create an IfModule directive to encapsulate the following location block so that proxy will be enabled by path (each request including /wls will be directed directly to the WebLogic Cluster).  You could also proxy requests by MIME type using MatchExpression in the Location block. <IfModule weblogic_module> <Location /wls>    SetHandler weblogic-handler    PathTrim /wls    WebLogicCluster MS1_URL:port,MS2_URL:port    Debug ON    WLLogFile        c:/tmp/global_proxy.log     WLTempDir        "c:/myTemp"    DebugConfigInfo  On </Location> </IfModule> SetHandler specifies the handler for the plug-in module  PathTrim will instruct the plug-in to trim /w ls from the URL before forwarding the request to the cluster. The list of WebLogic Servers defined in WeblogicCluster could contain a mixed set of clustered and single servers.  However, the dynamic list returned for this parameter will only contain valid clustered servers and may contain more servers if not all clustered servers are listed in WeblogicCluster. Testing proxy and load balancing It's time to start OHS web server which should at this point be configured correctly to proxy requests to the clustered servers.  By default round-robin is the load balancing strategy set by WebLogic. Testing the load balancing can be easily done by disabling cookies on your browser given that a request containing a cookie attempts to connect to the primary server. If that attempt fails, the plug-in attempts to make a connection to the next available server in the list in a round-robin fashion.  With cookies enabled, you could use two different browsers to test the load balancing with a JSP page that contains the following: <%@ page contentType="text/html; charset=iso-8859-1" language="java"  %>  <%  String path = request.getContextPath();   String getProtocol=request.getScheme();   String getDomain=request.getServerName();   String getPort=Integer.toString(request.getLocalPort());   String getPath = getProtocol+"://"+getDomain+":"+getPort+path+"/"; %> <html> <body> Receiving Server <%=getPath%> </body> </html>  Assuming that you name the JSP page Test.jsp and the webapp that contains it TestApp, your browsers should open the following URL: http://localhost/wls/TestApp/Test.jsp  Each browser should connect to a different clustered server and this simple JSP should confirm that.  The webapp that contains the JSP needs to be deployed to the cluster. You can also verify that the load is correctly balanced by looking at the proxy log file.  Each request generates a set of log entries that starts with : timestamp ================New Request: Each request is associated with a primary server and a secondary server if one is available.  For our test request, the following entries should appear in the log as well:Using Uri /wls/TestApp/Test.jsp After trimming path: '/TestApp/Test.jsp' The final request string is '/TestApp/Test.jsp' If an exception occurs, it should also be logged in the proxy log file with the prefix:timestamp *******Exception type   WeblogicBridgeConfig DebugConfigInfo enables runtime statistics and the production of configuration information.  For security purposes, this parameter should be turned off in production. http://webserver_host:port/path/xyz.jsp?__WebLogicBridgeConfig will display a proxy bridge page detailing the plugin configuration followed by runtime statistics which could help in diagnosing issues along with the analyzing of the proxy log file.  In our example the url would be: http://localhost/wls/TestApp/Test.jsp?__WebLogicBridgeConfig  Here is how the top section of the screen can look like: The bottom part of the page contains runtime statistics, here is a snippet of it (unrelated with the previous JSP example).   This entire plugin configuration should be very similar with other web servers, what varies is the name of the proxy server configuration file. So, as you can see, it only takes a few minutes to configure a Weblogic cluster and get servers to join it. 

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • Refresh banshee album art

    - by kmassada
    I usually just copy ~/.config/banshee-1, and ~/.gconf/apps/banshee-1 when i'm moving from one computer to the other, if I keep the path of the folders. I get to keep my music library intact with the playlists I have. The problem with this method is that, the album arts doesn't carry over nicely. You'd have to play every album to get the album art to appear. Anyone knows a workaround, to maybe force banshee to reload all album art? I saw this, but not quite what my issue is? I tried banshee --fetch-artwork, but didn't work too well kenneth@dv7:~$ banshee --fetch-artwork [Warn 11:23:38.200] DBus support could not be started. Disabling for this sessi on. - System.Exception: Error 111: Connection refused (in `dbus-sharp') at DBus.Unix.UnixSocket.Connect (System.Byte[] remote_end) [0x00000] in <filen ame unknown>:0 at DBus.Transports.UnixNativeTransport.OpenAbstractUnix (System.String path) [ 0x00000] in <filename unknown>:0 at DBus.Transports.UnixNativeTransport.Open (System.String path, Boolean abstr act) [0x00000] in <filename unknown>:0 at DBus.Transports.UnixTransport.Open (DBus.AddressEntry entry) [0x00000] in < filename unknown>:0 at DBus.Transports.Transport.Create (DBus.AddressEntry entry) [0x00000] in <fi lename unknown>:0 at DBus.Connection.OpenPrivate (System.String address) [0x00000] in <filename unknown>:0 at DBus.Connection..ctor (System.String address) [0x00000] in <filename unknow n>:0 at DBus.Bus..ctor (System.String address) [0x00000] in <filename unknown>:0 at DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 System.Exception: Unable to open the session message bus. (in `dbus-sharp') at DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at DBus.BusG.Init () [0x00000] in <filename unknown>:0 at Banshee.ServiceStack.DBusConnection.Connect (System.String serviceName, Boo lean init) [0x00000] in <filename unknown>:0 at Banshee.ServiceStack.DBusConnection.GrabDefaultName () [0x00000] in <filena me unknown>:0 [Info 11:23:38.286] Running Banshee 2.6.0: [Ubuntu 12.10 (linux-gnu, x86_64) @ 2012-10-11 06:19:37 UTC] (Banshee:21865): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Failed to connect to socket /tmp/dbus-vLxS6Riwsn: Connection refused [Warn 11:23:38.948] Could not read GConf key core.send_anonymous_usage_data - G Lib.GException: No D-BUS daemon running (in `gconf-sharp') at GConf.Client.Get (System.String key) [0x00000] in <filename unknown>:0 at Banshee.GnomeBackend.GConfConfigurationClient.TryGet[Boolean] (System.Strin g namespace, System.String key, System.Boolean& result) [0x00000] in <filename u nknown>:0 (Banshee:21865): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Failed to connect to socket /tmp/dbus-vLxS6Riwsn: Connection refused [Warn 11:23:39.239] Could not read GConf key core.send_anonymous_usage_data - G Lib.GException: No D-BUS daemon running (in `gconf-sharp') at GConf.Client.Get (System.String key) [0x00000] in <filename unknown>:0 at Banshee.GnomeBackend.GConfConfigurationClient.TryGet[Boolean] (System.Strin g namespace, System.String key, System.Boolean& result) [0x00000] in <filename u nknown>:0

    Read the article

  • Why I Love Microsoft Development

    - by Brian Lanham
    I've been writing software for a while and recently had an opportunity to broaden my horizons and start developing for iOS. We decided to leverage, as much as possible, our existing skills and use MonoTouch and MonoDevelop by Novell.    For those of you who do not know, Mono is a .NET port originally designed for Linux but adapted for other platforms as well. MonoTouch is a port specifically for building iOS applications using the .NET framework. MonoDroid is a port (in CTP-esque release) for Android.   A MISSING COMPONENT - VISUAL DESIGNER   MonoDevelop lacks one very significant component compared with other tools I am using: NO VISUAL DESIGNER. Instead of using an integrated visual designer, MonoDevelop shells to the Mac OS "Interface Builder".  Since MonoDevelop lets me have a "Visual Studio-esque" feel *and* I get to use C#, AND it's FREE, I am gladly willing to overlook this.  In fact, it's not even a question.  Free?  Sure, I'll take it with no Visual Designer.   In my experiences I've grown from UNIX and DOS to .NET development through many steps. Java/JSP/Servlets; Windows; Web; etc. I've been doing .NET for quite a few years and I guess I just got "comfortable" with the tools.   WHY AM I NOT GETTING IT?   Interface Builder (IB) is amazingly confusing for me. I had the opportunity to speak at the Northern VA Code Camp on 12/11/2010. My presentation was "Getting Started with iOS Development using MonoTouch and C#".    At the visual design part of the presentation, I asked one of the 3 or 4 Mac developers in the room about my confusion with the IB. I don't understand why the "Classes" list includes objects. I don't understand what "File's Owner" is. And, most importantly, WHAT THE HECK IS AN OUTLET AND WHY IS IT NECESSARY?!?!?"   His response to these question (especially Outlets): "They did it wrong."   I'm accustom to a visual designer that creates variables for graphical widgets for me. Not IB. Instead, I have to create "Outlets" manually. I still do not understand why and, the explanation from a seasoned Mac developer is that it's wrong. (He received nods of confirmation from the other Mac devs in the room.)   I LOVE MS DEV   I love development for Microsoft platforms using Microsoft development tools. I love Windows 7. I love Visual Studio 2010. I love SQL Server. Azure, Entity Framework, Active Directory, Office, WCF/WF/WPF, etc. are all designed with integration in mind. They are also all designed with developers in mind.   Steve Ballmer recently ranted "It's the developers!" That's why it is relatively quick to build apps using MS tools. Clearly, MS knows that while we usually enjoy building technology solutions, we are here to make money. And we need tools that accelerate our time to market without compromising the power and quality of our solutions.   So, yeah, I am sucking up I guess. But I love Microsoft Development. Thank you, Microsoft, for providing the plethora of great development tools.    P.S. (but please slow down a bit…I'm having trouble keeping up!)

    Read the article

  • NVidia with Optimus conflicting in Ubuntu 12.04

    - by Humannoise
    i have recently installed Ubuntu 12.04 in a Intel Ivy Bridge with integrated graphics and NVidia GPU with Optimus tech, however i cant manage it to work properly. I have already passed by the solution of bumblebee project, however iam got the following message when try to run anything with nvidia card( e.g. with optirun firefox): [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. [ERROR]Could not connect to bumblebee daemon - is it running? Since the nvidia card is not working properly, some softwares like Scilab, that make use of X11 system for graphic handling and plotting, wont work too. my bios has no option concerning graphics card and the log of daemon returned: Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[980]: Module 'nvidia' is not found. Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943272] init: bumblebeed main process (980) terminated with status 1 Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943288] init: bumblebeed main process ended, respawning Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[1026]: Module 'nvidia' is not found. The lspci -nn | grep '\[030[02]\]:' returned: 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) Ok, for the command dpkg -l | grep '^ii' | grep nvidia i got : ii bumblebee-nvidia 3.0-2~preciseppa1 nVidia Optimus support using the proprietary NVIDIA driver ii nvidia-current 302.17-0ubuntu1~precise~xup1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-current-updates 295.49-0ubuntu0.1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-settings 302.17-0ubuntu1~precise~xup3 Tool of configuring the NVIDIA graphics driver ii nvidia-settings-updates 295.33-0ubuntu1 Tool of configuring the NVIDIA graphics driver After full reinstallation, including the remove of any previous nvidia drive, lsmod | grep -E 'nvidia|nouveau' returned: nvidia 10888310 46 dmesg | grep -C3 -E 'nouveau|NVRM' returned things like: [ 1875.607283] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1875.607289] nvidia 0000:01:00.0: setting latency timer to 64 [ 1875.607293] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 1875.607363] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012 [ 1884.830035] nvidia 0000:01:00.0: PCI INT A disabled [ 1884.832058] bbswitch: disabling discrete graphics [ 1884.832960] bbswitch: Result of Optimus _DSM call: 09000019 Some programs, like Scilab, are now working fine under optirun(e.g. >optirun scilab) call. Thank you.

    Read the article

  • How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

    - by keepitsimpleengineer
    After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

    Read the article

  • Refactoring Part 1 : Intuitive Investments

    - by Wes McClure
    Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

    Read the article

  • ArchBeat Link-o-Rama for 2012-09-19

    - by Bob Rhubart
    BPM Process Accelerator Packs – Update | Pat Shepherd Architect Pat Shepherd shares several resources relevant to the new Oracle Process Accelerators for Oracle Business Process Management. Oracle BI EE Management Pack Now Available for Oracle Enterprise Manager 12cR2 | Mark Rittman A handy and informative overview from Oracle ACE Director Mark Rittman. WebSockets on WebLogic Server | Steve Button "As there's no standard WebSocket Java API at this point, we've chosen to model the API on the Grizzly WebSocket API with some minor changes where necessary," says James "Buttso" Buttons. "Once the results of JSR-356 (Java API for WebSocket) becomes public, we'll look to implement and support that." Oracle Reference Architecture: Software Engineering This document from the IT Strategies from Oracle library focuses on integrated asset management and the need for efffective asset metadata management to insure that assets are properly tracked and reused in a manner that provides a holistic functional view of the enterprise. The tipping point for cloud management is nigh | Cloud Computing - InfoWorld "Businesses typically don't think too much about managing IT resources until they become too numerous and cumbersome to deal with on an ad hoc basis—a point many companies will soon hit in their adoption of cloud computing." — David Linthicum DevOps Basics: Track Down High CPU Thread with ps, top and the new JDK7 jcmd Tool | Frank Munz "The approach is very generic and works for WebLogic, Glassfish or any other Java application," say Frank Munz. "UNIX commands in the example are run on CentOS, so they will work without changes for Oracle Enterprise Linux or RedHat. Creating the thread dump at the end of the video is done with the jcmd tool from JDK7." Frank has captured the process in the posted video. OIM 11g R2 UI customization | Daniel Gralewski "OIM user interface customizations are easier now, and they survive patch applications--there is no need to reapply them after patching," says Fusion Middleware A-Team member Daniel Gralewski. "Adding new artifacts, new skins, and plugging code directly into the user interface components became an easier task." Daniel shows just how easy in this post. Thought for the Day "I have yet to see any problem, however complicated, which, when looked at in the right way, did not become still more complicated." — Poul Anderson (November 25, 1926 – July 31, 2001) Source: SoftwareQuotes.com

    Read the article

  • Configuring the iPlanet as web tier for Oracle WebCenter Content (UCM)

    - by Adao Junior
    If you are looking for configure the iPlanet as Web server/proxy to use with the Oracle WebCenter Content, you probably won’t found an specific documentation for that or will found some old complex notes related to the old 10gR3. This post will help you out with few simple steps. That’s the diagram of the test scenario, considering that you will deploy in production in an cluster environment. First you need the software, for our scenario you will need: - Oracle iPlanet Web Server 7.0.15+ (Installed) - Oracle WebCenter Content 11gR1 PS5 (Installed) - Oracle WebLogic Web Server Plugins 11g (1.1) - Supported JDK (Using Oracle Java JDK 7u4 for the test) - Certified Client OS - Certified Server OS (Using Oracle Solaris 11 for the test) - Certified Database (Using Oracle Database 11.2.0.3 for the test) Then the configuration: - Download the latest plugin: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html - Extract the WLSPlugin11g-iPlanet7.0 in some folder, like <iPlanet_Home>/plugins/wls11 - Include the plugin reference to the magnus.conf: If Unix (Solaris or Linux), include the line: Init fn="load-modules" shlib="/apps/oracle/WebServer7/plugins/wls11/lib/mod_wl.so" If Windows, Include the line:        Init fn="load-modules" shlib="D:\\oracle\\WebServer7\\plugins\\wls11\\lib\\mod_wl.dll" - Include the proxy reference to the obj.conf of each instance: <Object name="weblogic" ppath="*/cs/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_dav/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_ocsh/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/adfAuthentication/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> If you are using an single node setup, change the Service fn=…. line to something like: Service fn="wl-proxy" WebLogicHost=<wcc-server> WebLogicPort=16200 With these configurations, your should have the WebCenter Content UI working with the iPlanet, test it. [http://<web-server>/cs/] With the UI working, the last step is to configure the WebDav: - Go to the iPlanet Admin Console (usually https://<web-server>:8989) - Go to Configurations >> [instance] >> Virtual Servers >> [Virtual Server] >> WebDAV: - Click New - Populate the URI with /cs/idcplg/webdav: - Select “Anyone (No Authentication)”, the wc Content will take care of the security: This will allow you to use the WebDav feature and the Desktop Integration Suite, including double-byte characters. Anothers iPlanet tunes could be done, I can cover in the next post related to the iPlanet. Cross-posted on the ContentrA.com Blog Related posts:  - Using a Web Proxy Server with WebCenter Family

    Read the article

  • Feedback on meeting of the Linux User Group of Mauritius

    Once upon a time in a country far far away... Okay, actually it's not that bad but it has been a while since the last meeting of the Linux User Group of Mauritius (LUGM). There have been plans in the past but it never really happened. Finally, Selven took the opportunity and organised a new meetup with low administrative overhead, proper scheduling on alternative dates and a small attendee's survey on the preferred option. All the pre-work was nicely executed. First, I wasn't sure whether it would be possible to attend. Luckily I got some additional information, like children should come, too, and I was sold to this community gathering. According to other long-term members of the LUGM it was the first time 'ever' that a gathering was organised outside of Quatre Bornes, and I have to admit it was great! LUGM - user group meeting on the 15.06.2013 in L'Escalier Quick overview of Linux & the LUGM With a little bit of delay the LUGM meeting officially started with a quick overview and introduction to Linux presented by Avinash. During the session he told the audience that there had been quite some activity over the island some years ago but unfortunately it had been quiet during recent times. Of course, we also spoke about the acknowledged world dominance of Linux - thanks to Android - and the interesting possibilities for countries like Mauritius. It is known that a couple of public institutions have there back-end infrastructure running on Red Hat Linux systems but the presence on the desktop is still very low. Users are simply hanging on to Windows XP and older versions of Microsoft Office. Following the introduction of the LUGM Ajay joined into the session and it quickly changed into a panel discussion with lots of interesting questions and answers, sharing of first-hand experience either on the job or in private use of Linux, and a couple of ideas about how the LUGM could promote Linux a bit more in Mauritius. It was great to get an insight into other attendee's opinion and activities. Especially taking into consideration that I'm already using Linux since around 1996/97. Frankly speaking, I bought a SuSE 4.x distribution back in those days because I couldn't achieve certain tasks on Windows NT 4.0 without spending a fortune. OpenELEC Mediacenter Next, Selven gave us decent introduction on OpenELEC: Open Embedded Linux Entertainment Center (OpenELEC) is a small Linux distribution built from scratch as a platform to turn your computer into an XBMC media center. OpenELEC is designed to make your system boot fast, and the install is so easy that anyone can turn a blank PC into a media machine in less than 15 minutes. I didn't know about it until this presentation. In the past, I was mainly attached to Video Disk Recorder (VDR) as it allows the use of satellite receiver cards very easily. Hm, somehow I'm still missing my precious HTPC that I had to leave back in Germany years ago. It was great piece of hardware and software; self-built PC in a standard HiFi-sized (43cm) black desktop casing with 2 full-featured Hauppauge DVB-s cards, an old-fashioned Voodoo graphics card, WiFi card, Pioneer slot-in DVD drive, and fully remote controlled via infra-red thanks to Debian, VDR and LIRC. With EP Guide, scheduled recordings and general multimedia centre it offered all the necessary comfort in the living room, besides a Nintendo game console; actually a GameCube at that time... But I have to admit that putting OpenELEC on a Raspberry Pi would be a cool DIY project in the near future. LUGM - our next generation of linux users (15.06.2013) Project Evil Genius (PEG) Don't be scared of the paragraph header. Ish gave us a cool explanation why he named it PEG - Project Evil Genius; it's because of the time of the day when he was scripting down his ideas to be able to build, package and provide software applications to various Linux distributions. The main influence came from openSuSE but the platform didn't cater for his needs and ideas, so he started to work out something on his own. During his passionate session he also talked about the amazing experience he had due to other Linux users from all over the world. During the next couple of days Ish promised to put his script to GitHub... Looking forward to that. Check out Ish's personal blog over at hacklog.in. Highly recommended to read. Why India? Simply because the registration fees per year for an Indian domain are approximately 20 times less than for a Mauritian domain (.mu). Exploring the beach of L'Escalier af the meeting 'After-party' at the beach of L'Escalier Puh, after such interesting sessions, ideas around Linux and good conversation during the breaks and over lunch it was time for a little break-out. Selven suggested that we all should head down to the beach of L'Escalier and get some impressions of nature down here in the south of the island. Talking about 'beach' ;-) - absolutely not comparable to the white-sanded ones here in Flic en Flac... There are no lagoons down at the south coast of Mauriitus, and watching the breaking waves is a different experience and joy after all. Unfortunately, I was a little bit worried about the thoughtless littering at such a remote location. You have to drive on natural paths through the sugar cane fields and I was really shocked by the amount of rubbish lying around almost everywhere. Sad, really sad and it concurs with Yasir's recent article on the same topic. Resumé & outlook It was a great event. I met with new people, had some good conversations, and even my children enjoyed themselves the whole day. The location was well-chosen, enough space for each and everyone, parking spaces and even a playground for the children. Also, a big "Thank You" to Selven and his helpers for the organisation and preparation of lunch. I'm kind of sure that this was an exceptional meeting of LUGM and I'm really looking forward to the next gathering of Linux geeks. Hopefully, soon. All images are courtesy of Avinash Meetoo. More pictures are available on Flickr.

    Read the article

  • How can a solo programmer become a good team player?

    - by Nick
    I've been programming (obsessively) since I was 12. I am fairly knowledgeable across the spectrum of languages out there, from assembly, to C++, to Javascript, to Haskell, Lisp, and Qi. But all of my projects have been by myself. I got my degree in chemical engineering, not CS or computer engineering, but for the first time this fall I'll be working on a large programming project with other people, and I have no clue how to prepare. I've been using Windows all of my life, but this project is going to be very unix-y, so I purchased a Mac recently in the hopes of familiarizing myself with the environment. I was fortunate to participate in a hackathon with some friends this past year -- both CS majors -- and excitingly enough, we won. But I realized as I worked with them that their workflow was very different from mine. They used Git for version control. I had never used it at the time, but I've since learned all that I can about it. They also used a lot of frameworks and libraries. I had to learn what Rails was pretty much overnight for the hackathon (on the other hand, they didn't know what lexical scoping or closures were). All of our code worked well, but they didn't understand mine, and I didn't understand theirs. I hear references to things that real programmers do on a daily basis -- unit testing, code reviews, but I only have the vaguest sense of what these are. I normally don't have many bugs in my little projects, so I have never needed a bug tracking system or tests for them. And the last thing is that it takes me a long time to understand other people's code. Variable naming conventions (that vary with each new language) are difficult (__mzkwpSomRidicAbbrev), and I find the loose coupling difficult. That's not to say I don't loosely couple things -- I think I'm quite good at it for my own work, but when I download something like the Linux kernel or the Chromium source code to look at it, I spend hours trying to figure out how all of these oddly named directories and files connect. It's a programming sin to reinvent the wheel, but I often find it's just quicker to write up the functionality myself than to spend hours dissecting some library. Obviously, people who do this for a living don't have these problems, and I'll need to get to that point myself. Question: What are some steps that I can take to begin "integrating" with everyone else? Thanks!

    Read the article

  • Protecting Cookies: Once and For All

    - by Your DisplayName here!
    Every once in a while you run into a situation where you need to temporarily store data for a user in a web app. You typically have two options here – either store server-side or put the data into a cookie (if size permits). When you need web farm compatibility in addition – things become a little bit more complicated because the data needs to be available on all nodes. In my case I went for a cookie – but I had some requirements Cookie must be protected from eavesdropping (sent only over SSL) and client script Cookie must be encrypted and signed to be protected from tampering with Cookie might become bigger than 4KB – some sort of overflow mechanism would be nice I really didn’t want to implement another cookie protection mechanism – this feels wrong and btw can go wrong as well. WIF to the rescue. The session management feature already implements the above requirements but is built around de/serializing IClaimsPrincipals into cookies and back. But if you go one level deeper you will find the CookieHandler and CookieTransform classes which contain all the needed functionality. public class ProtectedCookie {     private List<CookieTransform> _transforms;     private ChunkedCookieHandler _handler = new ChunkedCookieHandler();     // DPAPI protection (single server)     public ProtectedCookie()     {         _transforms = new List<CookieTransform>             {                 new DeflateCookieTransform(),                 new ProtectedDataCookieTransform()             };     }     // RSA protection (load balanced)     public ProtectedCookie(X509Certificate2 protectionCertificate)     {         _transforms = new List<CookieTransform>             {                 new DeflateCookieTransform(),                 new RsaSignatureCookieTransform(protectionCertificate),                 new RsaEncryptionCookieTransform(protectionCertificate)             };     }     // custom transform pipeline     public ProtectedCookie(List<CookieTransform> transforms)     {         _transforms = transforms;     }     public void Write(string name, string value, DateTime expirationTime)     {         byte[] encodedBytes = EncodeCookieValue(value);         _handler.Write(encodedBytes, name, expirationTime);     }     public void Write(string name, string value, DateTime expirationTime, string domain, string path)     {         byte[] encodedBytes = EncodeCookieValue(value);         _handler.Write(encodedBytes, name, path, domain, expirationTime, true, true, HttpContext.Current);     }     public string Read(string name)     {         var bytes = _handler.Read(name);         if (bytes == null || bytes.Length == 0)         {             return null;         }         return DecodeCookieValue(bytes);     }     public void Delete(string name)     {         _handler.Delete(name);     }     protected virtual byte[] EncodeCookieValue(string value)     {         var bytes = Encoding.UTF8.GetBytes(value);         byte[] buffer = bytes;         foreach (var transform in _transforms)         {             buffer = transform.Encode(buffer);         }         return buffer;     }     protected virtual string DecodeCookieValue(byte[] bytes)     {         var buffer = bytes;         for (int i = _transforms.Count; i > 0; i—)         {             buffer = _transforms[i - 1].Decode(buffer);         }         return Encoding.UTF8.GetString(buffer);     } } HTH

    Read the article

  • Survey results: Open source developer preferences

    We recently conducted a survey of open source developers to learn about their current preferences around hosting sites and source control systems.  The survey was primarily advertised via Twitter, and we tried to avoid pushing the survey among audiences that would be specifically oriented towards a particular site (for example we did not advertise the survey from the CodePlex twitter account). In total there were just under 500 responses, so a reasonable sample size although not necessarily enough to guarantee fully representative results.  One of the survey questions was what is your preferred operating system for development, and looking at the results they are particularly interesting when split by operating system preference because of how significant the difference is:   Table 1 - Preferences by what is preferred operating system for development   As you can see, the preferences among developers which prefer Windows is very different from Linux and Mac oriented developers.  Again, the question was on what operating system they prefer to use for development, and didn’t ask what type of applications they create, so presumably many create things like websites which are cross-platform from a user perspective regardless of the operating system they prefer developing with. For hosting site preference, CodePlex and GitHub are roughly tied for first place among Windows developers and combined are preferred by over 75%.  However with Linux and Mac developers, GitHub has a runaway lead over the other sites.  Perhaps not particularly surprising, CodePlex has negligible mindshare among Linux and Mac developers.  It is somewhat surprising how low SourceForge and Google Code are given historically they used to rank much higher. Looking at version control preferences is also interesting.  Among Windows developers TFS, Mercurial, Subversion, and Git all have a sizable following.  While for Linux and Mac developers it is almost all Git and Mercurial, with Git having a substantial lead.  Git is generally considered to run better on Linux and have more of a Unix feel, so not really surprising to see it more popular there compared to Windows developers.  It is surprising how low Subversion has dropped since it was the dominant preference not long ago for open source developers.  Around a quarter of Windows developers still prefer Subversion, but Linux and Mac developers have largely abandoned it.  The trend towards distributed version control systems (e.g. Mercurial and Git) is strong, with over 50% of Windows developers now prefer DVCS, and over 80% of Linux and Mac developers.

    Read the article

  • Error while installation of CHMSee

    - by Anshuman Chakraborty
    I have recently migrated from Windows to Ubuntu. My current locale shows below output :- cha@COMPUTER:~$ locale LANG=en_IN LANGUAGE=en_IN:en LC_CTYPE="en_IN" LC_NUMERIC="en_IN" LC_TIME="en_IN" LC_COLLATE="en_IN" LC_MONETARY="en_IN" LC_MESSAGES="en_IN" LC_PAPER="en_IN" LC_NAME="en_IN" LC_ADDRESS="en_IN" LC_TELEPHONE="en_IN" LC_MEASUREMENT="en_IN" LC_IDENTIFICATION="en_IN" LC_ALL= When I am trying to install CHMSee (or any other Application) using UBUNTU Software Center. I am getting below error. installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Selecting previously unselected package libchm1. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 207053 files and directories currently installed.) Unpacking libchm1 (from .../libchm1_2%3a0.40a-1_i386.deb) ... Selecting previously unselected package libjavascriptcoregtk-1.0-0. Unpacking libjavascriptcoregtk-1.0-0 (from .../libjavascriptcoregtk-1.0-0_1.8.0-0ubuntu2_i386.deb) ... Selecting previously unselected package libwebkitgtk-1.0-common. Unpacking libwebkitgtk-1.0-common (from .../libwebkitgtk-1.0-common_1.8.0-0ubuntu2_all.deb) ... Selecting previously unselected package libwebkitgtk-1.0-0. Unpacking libwebkitgtk-1.0-0 (from .../libwebkitgtk-1.0-0_1.8.0-0ubuntu2_i386.deb) ... Selecting previously unselected package chmsee. Unpacking chmsee (from .../chmsee_1.3.0-2ubuntu2_i386.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up qmail (1.06-4) ... The hostname -f command returned: $1 Your system needs to have a fully qualified domain name (fqdn) in order to install the var-qmail packages. Installation aborted. dpkg: error processing qmail (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of qmail-run: qmail-run depends on qmail (>= 1.06-2.1); however: Package qmail is not configured yet. dpkg: error processing qmail-run (--configure): dependency problems - leaving unconfigured Setting up libchm1 (2:0.40a-1) ... No apport report written because the error message indicates its a followup error from a previous failure. Setting up libjavascriptcoregtk-1.0-0 (1.8.0-0ubuntu2) ... Setting up libwebkitgtk-1.0-common (1.8.0-0ubuntu2) ... Setting up libwebkitgtk-1.0-0 (1.8.0-0ubuntu2) ... Setting up chmsee (1.3.0-2ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: qmail qmail-run Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up qmail (1.06-4) ... The hostname -f command returned: $1 Your system needs to have a fully qualified domain name (fqdn) in order to install the var-qmail packages. Installation aborted. dpkg: error processing qmail (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of qmail-run: qmail-run depends on qmail (>= 1.06-2.1); however: Package qmail is not configured yet. dpkg: error processing qmail-run (--configure): dependency problems - leaving unconfigured Can someone please help me in resolving this issue. The elaboration would be most appreciated since I am very new to this. Thanks, Anshuman Chakraborty

    Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >