Search Results

Search found 22267 results on 891 pages for 'org mode'.

Page 513/891 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• How can I port forward with an airport extreme and a NAT enabled modem?

  - by Jon

  I run an Actiontec HD701D modem with NAT to an Airport extreme base station to laptop etc. As you might expect I get double NAT issues. I tried a lot of different things to forward a port, but no luck. Currently the airport is in bridge mode letting the modem handle the NAT, but still can't forward the port. Also to note: firewall is off on the router, firewall is set to allow the application in OSX 10.6.3 and I did forward the port in the router. No luck.

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• What are some good methods to improve personal password management?

  - by danilo

  I want to improve my personal password management. I usually use secure passwords, but overuse them for too many different places. My questions: What methods do you use to create passwords, e.g. for different online sites/logins? What methods do you use to remember those passwords? Memory? Pen&Paper? Software storage? Is there some good way to store my passwords somewhere, so I can always have access to them when I need them (e.g. a webbased solution on my own server) but at the same way keep them away from unwanted access? Edit: Someone on another site mentioned http://passwordmaker.org/. Have you had any good or bad experiences with that software?

  Read the article

• Easily tell if focused on VirtualBox window?

  - by Benjamin Oakes

  Is there a way to make it very obvious that my VirtualBox window isn't in focus? The problem I'm having is switching between workspaces on Ubuntu or OS X and then trying to type in my Windows virtual machine, only to find that it's not in focus. The Windows window looks like it's in focus (based on the title bar), but I'm actually typing in Firefox on the host machine, for example. It's even worse because the Windows text insertion cursor is blinking to show focus. Ideally, I'd like the VM's display to get unsaturated (e.g. a "partial" grayscale) when not in focus, just to prevent this keyboard-focus problem. Other options would be fine too, as long as I don't have to second guess where my focus is. I'm not using the seamless mode -- the display is all within a window.

  Read the article

• Remote location looses connectivity

  - by user24559

  I have a remote location that has constant internet access using DSL. The remote location only has three Linksys cameras that use the internet access with a router. There is no computer on the network. The router is configured to use the DYN.org service to keep the IP address updated if the internet provider assigns a new ip address. The problem I am having is the router after a period of time stops responding to incoming ping requests and the cameras are shown offline. However, if I keep one of the cameras constantly streaming data then the connection to all the cameras works just fine all the time. How can I keep the router from appearing to be sleeping and not responding to incoming requests? The router is the Linksys WRT300N.

  Read the article

• How to start wuala on the linux commandline with auto login

  - by mit

  When i start wuala on the linux commandline like this, it logs me in and the folder is mounted: wualamcd login username password enableAutoLogin I can shut it down from another console typing wuala shutdown But how do I actually use the auto login that I just set using the enableAutoLogin switch? What is the command to start it again, so it logs in but does not need the password? I tried wualamcd login and wuala starts but no one gets logged in. Auto login in gui mode works fine. This is 32 bit linux with openjdk 6 JRE.

  Read the article

• how to delete protected files in ntfs?

  - by Balchev

  Hello, I want to delete old windows directory from my system drive (C) , but I am unable to due NTFS perms.I tried from Win 7 and Win 2003, but can't do it. I tried safe mode as well with same result. I there any way to work around this (other then formating the drive)? Perhaps changing the owner or something? It errors at files like "oldwin/bfsvc.exe". Is there some "superuser" in windows similar to linux root account? Thanks

  Read the article

• How to prevent mod_cluster as single point failure?

  - by Hitesh

  In my configuration i used Apche+mod_cluster as a front_end(load balancer) server and two JBOSS AS 7.1.0 as backend server. In my configuration on one system i have install Apache+mod_cluster + JBOSS AS 7.1.0 and on other system JBOSS AS 7.1.0. Both JBOSS AS 7.1.0 are in domain mode means in clustering. My problem is that if Apche+mod_cluster crash than client can not access any JBOSS AS . I want to configure Apache+mod_cluster in Master_Slave format, means if one of Apache+mod_cluter down another Apache+mod_cluster become active and pass client(browser) request to back-end server in normal form without any interruption. Is there any way to make two Apache+mod_cluster to communicate with each other , means to check health status of each other and if any one get down other Apche+mod_cluster will do it's task ......

  Read the article

• How to set the request start time with HAProxy?

  - by Tupy

  I would like to measure the time of full request stack. The New Relic capture time of the middleware (e.g. java, python, ruby) and request time (See https://newrelic.com/docs/features/tracking-front-end-time). For this, I need to configure the X-Request-Start header as the request pass through the HAProxy load balance. The haproxy.cfg should look like: backend www balance roundrobin mode http reqadd "X-Request-Start" UNKNOWN_TIME_FUNCTION() server servername 192.168.0.1:80 weight 1 check There is a haproxy native function to replace the UNKNOWN_TIME_FUNCTION()?

  Read the article

• Gentoo Linux -> Ubuntu: Can I Preserve My LVM/RAID Devices, Or Do I Need To Reformat?

  - by Eddie Parker

  Hello: I've got a Gentoo box that I'm interested in switching over to an Ubuntu box. I currently have the partitions laid out using a mixture of RAID (mdadm) and LVM2, as specified in this document [1]. Ideally I'd like to just wipe out the non /home partition, as it's got data I'd like to keep. Is it possible to reuse the current setup, or do I need to restart? vgdisplay, vgchange -a y, etc don't yield any results from the Ubuntu LiveCD, and I'm wary to run any commands that might wipe my data. Your help would be appreciated. [1] http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml

  Read the article

• unable to install oracle

  - by Mohamed Saligh

  I have installed oracle few months back. I was running fine in my local system. Unfortunately my friend has removed all the directories in safe mode. meaning to say it was not properly un-installed from my system. I tried to remove all the Registry keys, Services associated with oracle. Now, I can install it. Unable to use any sqlplus services or anything. How to completely remove my hidden old files and services if any. Need to install and use it. Any help indeed

  Read the article

• How do I stop track changes from turning on automatically in Word 2007

  - by Benj

  Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

  Read the article

• Commercial NAS RAID1 disks moved to Software Raid system?

  - by Rolnik

  I've got a couple of commercial NAS boxes and I'm wondering if they (ReadyNas duo, DLink DNS-323) or any other NAS is suitable for having their RAIDed disks moved to a software-based NAS. To be specific, I'm a big fan of the (largely) Debian-based Ubuntu. Can the aforementioned NAS drives be migrated to Ubuntu (e.g. using the mdadm Linux command)? Secondly, is there any commercial NAS that can be migrated over? Incidentally, here is a link to somebody who succeeded in a migration: http://www.linuxquestions.org/questions/slackware-14/moving-raid1-drives-into-computer-with-same-md-numbers-862312/ My specific scenario I'd like to prepare for, is the eventual (sudden) death of one of the NAS motherboards.

  Read the article

• opening and closing connection with port happening fastly

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Why do all my browsers default to the "Impact" font?

  - by J Alain Ferry

  I've been struggling with a font issue which I hope you can help resolve. A few weeks ago I started seeing "Impact" as the default font on lots of webpages, rendering much of the content illegible. I think this issue began after I installed other fonts, but I'm not sure. The issue occurs on Chrome, IE and Firefox which suggests it is a Windows issue. By the time I tried to revert the changes via System Restore, it was too late. I tried to reset the default font but Windows does not seem to respond to that. When I click "Restore to default font settings" the button greys out but nothing else happens. No dialog box and no change in the issue. I've tried deleting the fonts in my font folder and re-installing them (from backup) but that did not work either. I inititially documented the issue here: http://forums.techguy.org/windows-7/1020796-help-weird-font-all-browsers.html Any ideas? Thanks!

  Read the article

• Use cURL with multiple POSTs

  - by Austin

  I'm trying to use cURL to download the contents of webpages that require forms to get to. In a browser it looks something like this 1.) Login using POST 2.) Pick which page to go to using another POST 3.) Pick another page... using POST 4.) etc.. until I get to the page I want, then download all textfiles linked to on that page. I am attempting to do this using a bash script and some loops with the values that change for each POST. My problem is how do I do multiple POSTs with cURL? Must there be cookies involved? FYI the website is http://metagenomics.nmpdr.org/ (MG-RAST).

  Read the article

• Can a 32-bit RHEL4 userland work with a 64-bit kernel?

  - by James

  Is there a way to change an i386 RHEL4 machine to run an amd64 kernel, but ensure that it still builds software into same i386 binaries? On Debian this seems quite straightforward: just install an amd64 kernel (worst case, build one like this guy: http://www.debian-administration.org/users/jonesy/weblog/1) and prefix everything with "linux32". Then everything that considers uname -m will be unchanged, I just need to handle the few cases that consider uname -r. What is the Red Hat equivalent? Is the only way a full 64-bit installation on another disk and then chrooting back to the 32-bit system before anyone builds anything? (Even the best examples of that seem to be Debian-based.) Background: We make a large system that runs on (a variant of) i386 RHEL4. However, some of the larger RHEL build machines now have enough RAM that they might benefit from going 64-bit (for the kernel and maybe some of the bigger build steps). Our build system doesn't support cross-compilation.

  Read the article

• Why are some PNGs open in Photoshop with Indexed Colors and no transparency?

  - by Daniel Beardsley

  Why are some 32 bit PNGs opened in Photoshop with Indexed Colors and no transparency? For instance, I grabbed a png icon file of the Stack Overflow logo at: http://blog.stackoverflow.com/wp-content/uploads/icon-so.png When opening it in Photoshop CS3, it apparently treats it as indexed color and gets rid of the alpha channel. The image on the right is a screen grab of the icon. Changing the Image mode in Photoshop to RGB doesn't change the image at all. I've tried this with a few other PNGs and it seems hit or miss. When viewed in other programs, it displays fine. left:png opened in Photoshop, right:screen grab of png from browser What gives?, does Photoshop not interpret the PNG file format correctly?

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• Software to cache a web application for use offline

  - by littlecharva

  My boss quite regularly has to demo our web application to clients in a situation with no wifi available and sketchy 3G access, quite often the 3G lets him down. I have considered setting a copy of our server up in a virtual machine on his laptop so he could demo it offline, but I fear this will just introduce more headaches when he forgets how to boot the VM up. What I'd ideally like is an app that records you logging into a web app, saves copies of all the pages and ties the links and buttons you click up to offline copies of the pages it saves. So you could run through the demonstration you're going to give and have it cache the pages. When you then click the same buttons and links in offline mode it will present the relevant offline pages. Does such a thing exist? Can anyone recommend any alternative solutions to this problem? Thanks, Anthony

  Read the article

• Unset the system immutable bit in Mac OS X

  - by skylarking

  In theory I believe you can unlock and remove the system immutable bit with: chflags noschg /Path/To/File But how can you do this when you've set the bit as root? I have a file that is locked, and even running this command as root will not work as the operation is not permitted. I tried logging in as Single-User mode to no avail. I seem to remember that even though you are in as root you are in at level '1'. And to be able to remove the system-immutable flag you need to be logged in at level '0'. Does this have something to do with this issue?

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Google Chrome suspicious connections

  - by Poni

  I'm using Chrome at Windows and with TCPView (of the SysInternals freeware suit) I see that chrome.exe establish connections to these IPs: 173.194.37.104 209.85.146.138 Using http://www.ipaddresslocation.org/ I check about these IPs and see they're related to Google. Now, in order to clarify, these are the exact things I do: Open up chrome, the default page is set to BLANK (i.e no homepage whatsoever). Then I get into my website which has a blank page, so no "other" http requests are made. Right from this point there is a persistent connection, usually to '173.194.37.104'. What are these?? Very suspicious.. Edit #1: - I'm in 'incognito' mode right from start, when launching Chrome, using a shortcut with the '-incognito' switch. - I've turned off all phishing protections and other "advance" features in order to reduce Chrome's network activity.

  Read the article

• Cannot access any remote resource after connecting to Cisco VPN on Vista

  - by Deepak Singh Rawat

  I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >