Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 513/869 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

• Sharing a wifi connection between different user profiles on Windows XP

  - by crowne

  I've set-up two separate user profiles on an old laptop running Windows-XP, and noted the following strange behaviour. When the wireless network is setup using WEP both user profiles can connect to the internet and I can switch between user profiles, without network connectivity issues. However when I changed the wireless security to WPA2, the first user to connect gets access to the internet, when switching to the second profile the connection fails. The behaviour is the same regardless of which of the two profiles logs on first. I also tried this with one user with admin rights and one without, and got the same result. I'm not too concerned about a fix for this other than forcing the users to log-off when sharing the laptop, but I'd be interested to know if anyone can corroborate my findings. The network config was done using Intel® PROSet/Wireless.

  Read the article

• How to back up a network volume to my Time Capsule?

  - by Mike

  I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

  Read the article

• iptables unresolved dependencies

  - by tertle

  I'm trying to setup OpenVPN Access Server on a VPS running ubuntu 9.10 for a friend so she can play games from her uni campus. The problem is I keep running into this error when trying to start openvpn. Service deferred error: IPTablesServiceBase: failed to run iptables-restore [status=1]: ['FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'iptables-restore: line 46 failed']: internet/base:1175,internet/base:752,internet/process:45,internet/process:306,internet/_baseprocess:48,internet/process:775,internet/_baseprocess:60,svc/pp:116,svc/svcnotify:26,internet/defer:238,internet/defer:307,internet/defer:323,sagent/ipts:105,sagent/ipts:39,util/error:52,util/error:32 service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['iptables_openvpn']) Now I've already got my provider to enabled the TUN/TAP device driver and I checked this using # cat /dev/net/tun Which returned “File descriptor in bad state” Which I believe means it's enabled. After extensive searching, I've been unable to find any solution other than people suggesting to make sure TUN/TAP device driver is enabled. Any ideas on how to solve my issue? I'm not very experience with linux and I feel in over my head here so any advice is greatly appreciated. --edit-- Just stumbled across this Not sure how I missed it earlier. I believe I need to get modprobe ipt_mark & modprobe ipt_MARK run on the hostnode by my provider. Is this correct and something I should try get done.

  Read the article

• ISPConfig - Unexisting subdomain address goes to an existing one

  - by xperator

  I am running Nginx/ISPConfig setup for about 6-7 months. Never had a problem and everything is smooth. But I just noticed that if browse to "blab.example.com", the page opens one of my wordpress blogs on the other domain. No matter what name I use for subdomain, Anything that I enter randomly "b53ks.example.com" still goes to that blog page. I have 3 or 4 different domain names and websites on the same server. But I think I misconfigured somewhere and that might be the cause of this. Lets say I have these domains: example-1.com, example-2.com, another-example.com If I go to anything.example-1.com or serverfault.example-2.com, or google.another-example.com the returned page is my blog at blog.example-1.com Note : I didn't set any subdomain in ISPConfig. Instead, I used "Add new website" for making a subdomain.

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• Reliable Backup Solution for Linux for Complete System Restoration

  - by Chris S

  What's the best backup solution for Linux that can completely restore the entire filesystem to a blank harddrive (including partitioning) after an old harddrive dies? I'm currently running a few Ubuntu machines, some with RAID-1 and others without RAID (mostly laptops). I'd like to implement a backup solution that can take incremental snapshots of the entire filesystem, so that if I were to replace all the harddrives in a machine, I could use the backup to restore a perfect copy of the previous filesystem. Unfortunately, nearly all the backup solutions I've found seem to be glorified rsync scripts, which only backup some files, and have no easy way to restore once the entire filesystem is gone. Some of the more complicated solutions, like Bacula, might do what I need, but require a complicated server/client setup and are notoriously difficult to maintain. I've heard that Apple's TimeMachine utility has this ability, and I've had similar success taking differential disk images with Acronis True Image on Windows, but of course neither of these work on Linux. Is there anything comparable for Ubuntu?

  Read the article

• How can I set Out-Of-Office in a shared mailbox

  - by balexandre

  I would want to set the out-of-office automatic response to all emails that arrive to our [email protected]. currently in the Outlook, I only have one mailbox (the user mailbox) but it has 2 shared mailboxes setup. I have tried to create a Rule that says: for all email received on account [email protected] forward to user [email protected] and make that user to set up the Out-of-office message, but it simply did not work, and I suspect that the rules only apply to the user account and not the shared account... How can I set Out-Of-Office in this shared mailbox ?

  Read the article

• What configuration management solutions exist in a non-networked environment?

  - by Rob Spieldenner

  My servers exist in an environment without outside network connectivity (this is a requirement), so when I deploy updates all packages, binaries, config files, etc. must be included on the delivered media. And of course I want some sort of configuration management so I can tell what has and hasn't been installed. So I was wondering if people had experience with chef, puppet, or another configuration management type tool for dealing with this type of environment. Worst case I deploy my updates as an RPM. EDIT: My setup has both Linux servers and Windows servers.

  Read the article

• Recommendations for managing dedicated server DNS

  - by KP Overflow

  I've rented a dedicated server for several years with a number of domains. I've got a coding background so am comfortable with that side of the tech, but I hate that I still don't truly understand DNS settings. Example: My provider (hostgator) just told me that my parent nameservers are not correctly configured as there is no A record for my primary nameserver. What book/link/tutorial should I read to go from kind of understanding that comment to really understanding it & knowing exactly what I need to do to fix it rather than trial & error which is what I usually do. Thanks BTW I'm using a WHM/cpanel linux setup at hostgator but am eager to learn the fundamentals.

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Why don't I have a loop error with these redirects?

  - by byronyasgur

  I know this may seem a bit of a question in reverse, but I actually don't seem to have a problem I just want to make sure before I proceed. I have 2 domains domain1.com and domain2.com and a directory my_directory at domain2.com. I have domain2.com setup as an "add on domain" in the cpanel account of domain1.com so that when I go to domain2.com I am taken to domain1.com/my_directory but the browser shows domain2.com in the addressbar so it looks and acts like and is a separate site. However when people browse to domain1.com/directory I want the address bar to show domain2.com not domain1.com/directory. So I put a redirect in the htaccess file to redirect domain1.com/directory to domain2.com and it works perfectly, but I think it shouldnt and I'm worried I've done something wrong. My question is this: domain2.com was already redirected to domain1.com/directory in the first place (I see the redirect in my cpanel under addon domains) so by adding the second redirect in the htaccess file I should be creating a loop! Could somebody please set my mind at rest and show me why not?

  Read the article

• Change order of monitors without changing fullscreen"size"

  - by user171489

  I have a dual monitor setup. My primary monitor is a 22" with a max resolution of 1680x1050 and my secondary is a 19" with a max resolution of 1280x1024. The secondary is standing on the left side of the primary one. My problem now is, that, if I change the order of the monitors in my nvidia x-server settings, so that my secondary is the first one (or the one on the left), the fullscreen mode in flash in scaled up to my secondary monitor, even if it´s displayed on my primary one. Meaning that i get a 1280x1024 "fullscreen" window on my bigger primary monitor. When I configure my x-server settings so the secondary monitor is the one on the right, I don´t have this problem. The only thing then is, that I have to scroll out on the right to get to my monitor on the right. I can´t move my secondary monitor on the right side of my primary due to lack of space and my belief that there must be a software solution. ;) Thanks in advance.

  Read the article

• Dirt Cheap Bi-Directional Antenna Wirelessly Extends Your LAN

  - by Jason Fitzpatrick

  If you’re looking for an effective way to link remote LANs without the hassle of laying cable, this DIY bi-directional antenna is a quick (and cheap) method for bringing internet access to outbuildings and other locations. Tinker Danilo Larizza needed to share internet access between apartments that are relatively close together but not hardwired–ruling out simply sharing the access via existing LAN infrastructure. His solution combines a simple scrap wire antenna array mounted inside a plastic food bin (seen here with the cover removed to show the antenna) and some coaxial cable to link the antenna to two routers. Our favorite part about his build is that he constructed the pair to establish if the antenna setup would even work in his location and intended to buy commercial antennas if it did; his Tupperware models worked so well, however, they’re now the permanent solution. Hit up the link below for more information about the project. 2.4 Ghz Directive Biquad Antenna [via Hack A Day] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Samba Server needs to have AD authentication

  - by vivek

  My Linux server is connected to AD via Bind DN and password (without domain joining). It is using sssd for authentication. I am able to ssh and login without any issue. I have a proper setup of uid and guid, etc. .. There is no issue with logging to the linux server. I want the samba service to use AD accounts, but I can't find documentation for how to configure it in this case. Can anyone explain how to configure samba to use active directory for authentication on a system using sssd?

  Read the article

• Single Exchange 2007 server - two AD domains

  - by TheCleaner

  CURRENT: single domain, single Exchange 2007 NEW: two domains, single Exchange 2007 Can this be done? Details: Current setup is a single W2k3 domain with a single Exchange 2007 server. We are merging with another company that currently hosts their email with their ISP via POP3. We'd like to start hosting their email on our Exchange server using their existing domain SMTP addresses. They don't have an AD domain at all at the moment. Recommendations? Can I do this with a trust between the 2 domains? Requirements: They can't have multiple SMTP addresses on both domains...such as I've seen with articles pointing to "hosting multiple domains". I want companyA to have the same account settings they've always had...companyB to have the same SMTP address they've had and not an additional one on the current companyA Exchange domain. They should be able to collaborate (calendar, contacts, GALs) but should still be distinguishable based on which company they "work for". Please help...thanks!

  Read the article

• Will I be abled to access 2nd HDD from dual-boot

  - by Ruben

  I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• Why doesn't Windows 7 allow me to format?

  - by hydroparadise

  Dell support can be fun to deal with right? Ultimately, I have been going back and forth with Dell on an issue and came to reinstalling Windows 7 32-Bit Pro. The problem is that Windows Setup will not let me format. I've read other posts that say Windows 7 must installed on first partition here. But now that confuses me because the computer came shipped with the installation on the third partion as shown in the picture below? Is there a real problem? Or is this a Microsoftism? Should I obliterate the "OEM" partition to make this work? Please note that the format, delete, new, and extend options are grayed out.

  Read the article

• IIS 7 - Application pools

  - by vikp

  I made a CompanySite website in IIS - it's the only website on that server. I created .NET 4 Integrated pool for that website. I've installed ASP.Net site into CompanySite and it works fine. Now I'd like to install an application within this site. I create another .NET 4 application pool for that application. Then I install application into CompanySite using that application pool. As soon as setup starts off the website goes offline either with 503 or with The page cannot be displayed because an internal server error has occurred. The only way to fix this (that I have found) is to uninstall that application and restart Windows Server, not just IIS server. Question is how can I install multiple applications within a single site? THank you

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Forwarding emails to nonexisting users/aliases to external mail server

  - by Niclas Lindqvist

  I'm in the works of installing a postfix mailserver on a machine currently being used as web server. As of right now, I've got it working as far as that I can send and receive emails using telnet through port 25. However, as my customer is concerned with downtime, I'd like to setup all the accounts one by one over time, and making sure it works, rather than just cutting the cord to the old mail server and start creating new accounts on the new system. How can I add the domain customer.com to my mail server and just add something like [email protected] to the users and aliases-lists without the web server trying to send all emails with the @customer.com domain to the new mail server? I'm running ubuntu, using postfix and postfix-mysql on the new machine, the old mail server is on a hosted environment somewhere else, where I don't have any control.

  Read the article

• Passenger not working with SSL on Apache 2

  - by Zak

  I have a Rails app running on Passenger; It works as expected over unencrypted connections. I also have a working Apache SSL setup; I can access any static file available via http with https. When I try to access the Rails app via https, I get a 403 error (Directory index forbidden by rule). Turning on indexes for the directory simply causes Apache to display an index. I do have +ExecCGI set for the appropriate directory in the SSL version of the VirtualHost directive. I'm sure there's something obvious I'm overlooking. I'm just not sure where I need to be looking.

  Read the article

• Keyloggers and Virtualization

  - by paranoid

  Whilst pondering about security, and setting up different VM for certain online activities deemed more risky or requiring extra security (banking, or visiting untrusted websites, etc), I came to think about how such a setup (different VMs for different uses) would defend me against a keylogger. So, two questions then: 1: If a keylogger has been installed inside a VM, can it capture data outside its own VM? 2: The opposite, does a keylogger in a host capture strokes typed within a VM residing in that host? My bet would be No and Yes respectively, but I really have no idea. Anyone else does?

  Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >