Search Results

Search found 14402 results on 577 pages for 'interface builder'.

Page 516/577 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

  • MIX 2010 Covert Operations Day 3

    - by GeekAgilistMercenary
    I rolled over to the Mandalay for breakfast.  There I met a couple guys that were really excited about the new Windows 7 Phone.  They, as I, are also hopeful that the phone really gets a big push and some penetration into the market.  Not because we don’t like any other of the phones, but because this phone is so much better in many ways.  From a developer's perspective creating applications in Windows 7 Mobile will be vastly superior in ease, capabilities, and other aspects.  The architectural, existing code base, examples, and provisions to create things on the 7 Mobile Device are already existing as of RIGHT NOW.  There is no reason, except for fickle market conditions, for this phone to not just explode onto the market.  But alas, I won't hold my breath. Day three keynote had a whole new slew of things provided.  It also seemed that things got a lot more technical on this second keynote.  The oData was one of the very technical bits, yet it included almost no code.  Starting with a Netflix example and all the way to the Codename "Dallas" effort the oData Services provide some expansive possibilities. A mash up going 4 ways was then shown for finding a movie, finding local places to have a viewing, and information about the movie and were to prospectively find and buy additional movie bits.  The display was of course, in a Windows 7 Mobile device with literally a click to view each set of data.  The backend and the front end of this was beautifully smooth. The Dallas Project has a lot of potential for analytics in dashboard and scorecard creation also.  If there is a need or reason to provide data to a vast and wide range of clients, Dallas is a prime example of how to do that. Azure Clouds After the main keynote I checked out (while developing a working WPF & Silverlight Application for work) the session on deploying ASP.NET Applications, services, etc, into the cloud.  The session was pretty good, but I'll admit I got a little unfocused from it a few times.  It is after all hard to do two things at one time. I did take note that the cloud still is a multiple step process for deploying to.  This is a good thing and a bad thing.  There needs to be more checks and verifications when deploying something into the cloud just for technical reasons.  However, I feel that there should be some streamlining to the process.  Going back and forth between web and Visual Studio as the interface also seems kind of clunky.  Deployment should be able to be completed from within Visual Studio in my perspective.  Overall, the cloud is getting more and more impressive in function as well as theory. That's it from me so far on the third day of MIX.  I'll be note taking and studying hard to have more good tidbits to provide. Thanks for reading, if you're curious about more of my writing, check out this original entry at my other blog Agilist Mercenary.

    Read the article

  • Dell 3721 Wifi problem Ubuntu 13.04

    - by Sebastian
    I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

    Read the article

  • Information on upgrading Kinect Applications to MS SDK Beta 2.

    - by mbcrump
    Introduction Microsoft recently released the Kinect for Windows SDK Beta 2. It contains many enhancements and fixes that can be found here. The only problem with it is that a lot of current demo applications no longer function properly. Today, I’m going to walk you through a typical scenario of upgrading a Kinect application built with Beta 1 to Beta 2. Note: This tutorial covers WPF, but you can use the same techniques for WinForms. 1) Fix the references Let’s start with a fairly popular Kinect demo called Kinect User Interface Demo. This project uses the beta 1 version of Microsoft.Research.Kinect.dll and version 1.0.0.0 of Coding4Fun’s Kinect library. After you download the source code and extract the zip you will see the following references in Visual Studio 2010: Pay attention to the following references as these are the .dlls that you will have to update: Coding4Fun.Kinect.Wpf Microsoft.Research.Kinect If you click on Coding4Fun.Kinect.Wpf file you will see the following version information (v1.0.0.0): This needs to be upgraded to the Coding4Fun Kinect library built against Beta 2. So head over to http://c4fkinect.codeplex.com/ and hit download and you will have the following files. Go ahead and hit the delete key on your keyboard to remove the Coding4Fun.Kinect.Wpf.dll file from your project. Select “Add Reference” and navigate out to the folder where you extracted the files and select Coding4Fun.Kinect.Wpf.dll. If you click on the Coding4Fun.Kinect.Wpf.dll file and check properties it should be listed at 1.1.0.0: Fix Microsoft.Research.Kinect.dll The official SDK Beta 2 released a new .dll that you will need to reference in your application. Go ahead and select Microsoft.Research.Kinect.dll in your application and hit the Delete key on your keyboard. Go ahead and select Add Reference again and select Microsoft.Research.Kinect.dll from the .NET tab. Double check and make sure the version number is 1.0.0.45 as shown below. References fixed – Runtime needs to be updated. So we have fixed the references in a typical Kinect application that uses Microsoft’s SDK and C4F Kinect libraries. Now, we will need to update the runtime. All Beta 1 Kinect applications will instantiate the Runtime with the following code: Can you see that it is now marked with [Depreciated]? That means we need to update it before Microsoft decides to remove it from future versions of the SDK. We can fix this very easily by replacing this code: readonly Runtime _runtime = new Runtime(); with Microsoft.Research.Kinect.Nui.Runtime _nui; and adding similar code to our Loaded event as shown below public MainWindow() { InitializeComponent(); Loaded += new RoutedEventHandler(MainWindow_Loaded); } void MainWindow_Loaded(object sender, RoutedEventArgs e) { if (Runtime.Kinects.Count == 0) { txtInfo.Text = "Missing Kinect"; } else { _nui = Runtime.Kinects[0]; _nui.Initialize(RuntimeOptions.UseColor); // Video Frame Ready Event can happen now!!! //_nui.VideoFrameReady += new EventHandler<ImageFrameReadyEventArgs>(_nui_VideoFrameReady); _nui.VideoStream.Open(ImageStreamType.Video, 2, ImageResolution.Resolution640x480, ImageType.Color); } } In this sample, I am testing to see if a Kinect is detected and if it is then I initialize the runtime with my first Kinect by using the Runtime.Kinects[0]. You can also specify other Kinect devices here. The rest of the code is standard code that you simply modify however you wish (ie Skeletal, Depth, etc) depending on what type of video feed you want. Conclusion As you can see it really wasn’t that painful to upgrade your project to Beta 2. I would recommend that you go ahead and upgrade to Beta 2 as future versions of the SDK will use these methods.  Thanks for reading. Subscribe to my feed

    Read the article

  • Cloud hosted CI for .NET projects

    - by Scott Dorman
    Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available,  but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

    Read the article

  • Ubiquitous BIP

    - by Tim Dexter
    The last number I heard from Mike and the PM team was that BIP is now embedded in more than 40 oracle products. That's a lot of products to keep track of and to help out with new releases, etc. Its interesting to see how internal Oracle product groups have integrated BIP into their products. Just as you might integrate BIP they have had to make a choice about how to integrate. 1. Library level - BIP is a pure java app and at the bottom of the architecture are a group of java libraries that expose APIs that you can use. they fall into three main areas, data extraction, template processing and formatting and delivery. There are post processing capabilities but those APIs are embedded withing the template processing libraries. Taking this integration route you are going to need to manage templates, data extraction and processing. You'll have your own UI to allow users to control all of this for themselves. Ultimate control but some effort to build and maintain. I have been trawling some of the products during a coffee break. I found a great post on the reporting capabilities provided by BIP in the records management product within WebCenter Content 11g. This integration falls into the first category, content manager looks after the report artifacts itself and provides you the UI to manage and run the reports. 2. Web Service level - further up in the stack is the web service layer. This is sitting on the BI Publisher server as a set of services, runReport and scheduleReport are the main protagonists. However, you can also manage the reports and users (locally managed) on the server and the catalog itself via the services layer.Taking this route, you still need to provide the user interface to choose reports and run them but the creation and management of the reports is all handled by the Publisher server. I have worked with a few customer on this approach. The web services provide the ability to retrieve a list of reports the user can access; then the parameters and LOVs for the selected report and finally a service to submit the report on the server. 3. Embedded BIP server UI- the final level is not so well supported yet. You can currently embed a report and its various levels of surrounding  'chrome' inside another html based application using a URL. Check the docs here. The look and feel can be customized but again, not easy, nor documented. I have messed with running the server pages inside an IFRAME, not bad, but not great. Taking this path should present the least amount of effort on your part to get BIP integrated but there are a few gotchas you need to get around. So a reasonable amount of choices with varying amounts of effort involved. There is another option coming soon for all you ADF developers out there, the ability to drop a BIP report into your application pages. But that's for another post.

    Read the article

  • Oracle Solaris Crash Analysis Tool 5.3 now available

    - by user12609056
    Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

    Read the article

  • Session Sharing with another User on *NIX and Windows

    - by Giri Mandalika
    Oracle Solaris Since Solaris is not widely known for its graphical interface, let's just focus on sharing a terminal session in read-only mode with another user on the same system. Here is an example. eg., % finger Login Name TTY Idle When Where root Super-User pts/1 Sat 16:57 dhcp-amer-vpn-rmdc-a sunperf ??? pts/2 4 Sat 16:41 pitcher.sfbay.sun.com In this example, two users root and sunperf are connected to the same system from two different terminals pts/1 and pts/2 respectively. If the root user wants to show something to sunperf user -- what s/he is doing in her/his terminal, for example, it can be accomplished with the following command. script -a /dev/null | tee -a <target_terminal eg., # script -a /dev/null | tee -a /dev/pts/2 Script started, file is /dev/null # # uptime 5:04pm up 1 day(s), 2:56, 2 users, load average: 0.81, 0.81, 0.81 # # isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 # # exit Script done, file is /dev/null After the script .. | tee .. command, sunperf user should be able to see the root user's stdin and stdout contents in her/his own terminal until the script session exits in root user's terminal. Since this kind of sharing is based on capturing and redirecting the contents to the target terminal, the users on the receiving end won't be able to see whatever is being edited on initiators' terminal [using editors such as vi]. Also it is not possible to share the session with any connected user on the system unless the initiator has the necessary permissions and privileges. The script utility records everything printed in a terminal session, while the tee utility replicates the contents of the screen capture on to the standard output of the target terimal. The tee utility does not buffer the output - so, the screen capture from the initiators' terminal appears almost right away in the target terminal. Though I never tested, this technique may work on all *NIX and Linux flavors with little or no changes. Also there might be other ways to accomplish this. [Thanks to Sujeet for sharing this tip] Microsoft Windows Most of the Windows users may rely on VNC services to share a desktop session. Another way to share the desktop session is to use the Remote Desktop Connection (RDC) client. Here are the steps. Connect to the target Windows system using Remote Desktop Connection client Launch Windows Task Manager Navigate to the "Users" tab Find the user session that you want to connect to and have full control over as the other user who is currently holding that session Select the user name in Windows Task Manager, right click and choose the option "Remote Control" A window pops up on the other user's session with the message "<USER is requesting to control your session remotely. Do you accept the request?" Once the other user says "Yes", you will be granted access to that session. Since then both users should be able to see the same screen and even control the session from their respective workstations.

    Read the article

  • Five Key Trends in Enterprise 2.0 for 2011

    - by kellsey.ruppel(at)oracle.com
    We recently sat down with Andy MacMillan, an industry veteran and vice president of product management for Enterprise 2.0 at Oracle, to get his take on the year ahead in Enterprise 2.0 (E2.0). He offered us his five predictions about the ways he believes E2.0 technologies will transform business in 2011. 1. Forward-thinking organizations will achieve an unprecedented level of organizational awareness. Enterprise 2.0 and Web 2.0 technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. But this year we are anticipating that organizations will go to the next step and integrate social activities with business applications to deliver rich contextual "activity streams." Activity streams are a new way for enterprise users to get relevant information as quickly as it happens, by navigating to that information in context directly from their portal. We don't mean syndicating social activities limited to a single application. Instead, we believe back-office systems will be combined with social media tools to drive how users make informed business decisions in brand new ways. For example, an account manager might log into the company portal and automatically receive notification that colleagues are closing business around a certain product in his market segment. With a single click, he can reach out instantly to these colleagues via social media and learn from their successes to drive new business opportunities in his own area. 2. Online customer engagement will become a high priority for CMOs. A growing number of chief marketing officers (CMOs) have created a new direct report called "head of online"--a senior marketing executive responsible for all engagements with customers and prospects via the Web, mobile, and social media. This new field has been dubbed "Web experience management" or "online customer engagement" by firms and analyst organizations. It is likely to rapidly increase demand for a host of new business objectives and metrics from Web content management solutions. As companies interface with customers more and more over the Web, Web experience management solutions will help deliver more targeted interactions to ensure increased customer loyalty while meeting sales and business objectives. 3. Real composite applications will be widely adopted. We expect organizations to move from the concept of a single "uber-portal" that encompasses all the necessary features to a more modular, component-based concept for composite applications. This approach is now possible as IT and power users are empowered to assemble new, purpose-built composite applications quickly from existing components. 4. Records management will drive ECM consolidation. We continue to see a significant shift in the approach to records management. Several years ago initiatives were focused on overlaying records management across a set of electronic repositories and physical storage locations. We believe federated records management will continue, but we also expect to see records management driving conversations around single-platform content management consolidation. 5. Organizations will demand ECM at extreme scale. We have already seen a trend within IT organizations to provide a common, highly scalable infrastructure to consolidate and support content and information needs. But as data sizes grow exponentially, ECM at an extreme scale is likely to spread at unprecedented speeds this year. This makes sense as regulations and transparency requirements rise. The model in which ECM and lightweight CMS systems provide basic content services such as check-in, update, delete, and search has converged around a set of industry best practices and has even been coded into new industry standards such as content management interoperability services. As these services converge and the demand for them accelerates, organizations are beginning to rationalize investments into a single, highly scalable infrastructure. Is your organization ready for Enterprise 2.0 in 2011? Learn more.

    Read the article

  • Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

    - by Ravindra Pamidi
    A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

    Read the article

  • Planning in the Cloud - For Real

    - by jmorourke
    One of the hottest topics at Oracle OpenWorld 2012 this week is “the cloud”.  Over the past few years, Oracle has made major investments in cloud-based applications, including some acquisitions, and now has over 100 applications available through Oracle Cloud services.  At OpenWorld this week, Oracle announced seven new offerings delivered via the Oracle Cloud services platform, one of which is the Oracle Planning and Budgeting Cloud Service.  Based on Oracle Hyperion Planning, this service is the first of Oracle’s EPM applications to be to be offered in the Cloud.    This solution is targeted to organizations that are struggling with spreadsheets or legacy planning and budgeting applications, want to deploy a world class solution for financial planning and budgeting, but are constrained by IT resources and capital budgets. With the Oracle Planning and Budgeting Cloud Service, organizations can fast track their way to world-class financial planning, budgeting and forecasting – at cloud speed, with no IT infrastructure investments and with minimal IT resources. Oracle Hyperion Planning is a market-leading budgeting, planning and forecasting application that is used by over 3,300 organizations worldwide.  Prior to this announcement, Oracle Hyperion Planning was only offered on a license and maintenance basis.  It could be deployed on-premise, or hosted through Oracle On-Demand or third party hosting partners.  With this announcement, Oracle’s market-leading Hyperion Planning application will be available as a Cloud Service and through subscription-based pricing. This lowers the cost of entry and deployment for new customers and provides a scalable environment to support future growth. With this announcement, Oracle is the first major vendor to offer one of its core EPM applications as a cloud-based service.  Other major vendors have recently announced cloud-based EPM solutions, but these are only BI dashboards delivered via a cloud platform.   With this announcement Oracle is providing a market-leading, world-class financial budgeting, planning and forecasting as a cloud service, with the following advantages: ·                     Subscription-based pricing ·                     Available standalone or as an extension to Oracle Fusion Financials Cloud Service ·                     Implementation services available from Oracle and the Oracle Partner Network ·                     High scalability and performance ·                     Integrated financial reporting and MS Office interface ·                     Seamless integration with Oracle and non-Oracle transactional applications ·                     Provides customers with more options for their planning and budgeting deployment vs. strictly on-premise or cloud-only solution providers. The OpenWorld announcement of Oracle Planning and Budgeting Cloud Service is a preview announcement, with controlled availability expected in calendar year 2012.  For more information, check out the links below: Press Release Web site If you have any questions or need additional information, please feel free to contact me at [email protected].

    Read the article

  • Taking HRMS to the Cloud to Simplify Human Resources Management

    - by HCM-Oracle
    By Anke Mogannam With human capital management (HCM) a top-of-mind issue for executives in every industry, human resources (HR) organizations are poised to have their day in the sun—proving not just their administrative worth but their strategic value as well.  To make good on that promise, however, HR must modernize. Indeed, if HR is to act as an agent of change—providing the swift reallocation of employees  and the rapid absorption of employee data required for enterprises to shift course on a dime—it must first deal with the disruptive change at its own front door. And increasingly, that means choosing the right technology and human resources management system (HRMS) for managing the entire employee lifecycle. Unfortunately, for most organizations, this task has proved easier said than done. This is because while much has been written about advances in HRMS technology, until recently, most of those advances took the form of disparate on-premises solutions designed to serve very specific purposes. Although this may have resulted in key competencies in certain areas, it also meant that processes for core HR functions like payroll and benefits were being carried out in separate systems from those used for talent management, workforce optimization, training, and so on. With no integration—and no single system of record—processes were disconnected, ease of use was impeded, user experience was diminished, and vital data was left untapped.  Today, however, that scenario has begun to change, and end-to-end cloud-based HCM solutions have moved from wished-for innovations to real-life solutions. Why, then, have HR organizations been so slow in adopting them? The answer—it would seem—is, “It’s complicated.” So complicated, in fact, that 45 percent of the respondents to PwC’s “Annual HR Technology Survey” (for 2013) reported having no formal HR software roadmap, and 40 percent stated that they “did not know” whether their organizations would be increasing their use of cloud or software as a service (SaaS) for HR.  Clearly, HR organizations need help sorting through the morass of HR software options confronting them. But just as clearly, there’s an enormous opportunity awaiting those that do. The trick will come in charting a course that allows HR to leverage existing technology while investing in the cloud-based solutions that will deliver the end-to-end processes, easy-to-understand analytics, and superior adaptability required to simplify—and add value to—every aspect of employee management. The Opportunity therefore is to cut costs, drive Innovation, and increase engagement by moving to cloud-based HCM.  Then you will benefit from one Interface, leverage many access points, and  gain at-a-glance insight across your entire workforce. With many legacy on-premises HR systems not being efficient anymore and cloud-based, integrated systems that span the range of HR functions finally reaching maturity, the time is ripe for moving core HR to the cloud. Indeed, for the first time ever there are more HRMS replacement initiatives than HRMS upgrade initiatives under way, and the majority of them involve moving to the cloud per Cedar Crestone’s 2013-2014 HRMS survey. To learn how you can launch your own cloud HCM initiative and begin using HR to power the enterprise, visit Oracle HRMS in the Cloud and Oracle’s new customer 2 cloud program. Anke Mogannam brings more than 16 years of marketing and human capital management experience in the technology industries to her role at Oracle where she is part of the Human Capital Management applications marketing team. In that role, Anke drives content marketing, messaging, go-to-market activities, integrated marketing campaigns, and field enablement. Prior to joining Oracle, Anke held several roles in communications, marketing, HCM product strategy and product management at PeopleSoft, SAP, Workday and Saba. Follow her on Twitter @amogannam

    Read the article

  • My architecture has a problem with views that required information from different objects. How can I solve this?

    - by Oscar
    I am building an architecture like this: These are my SW layers ______________ | | | Views | |______________| ______________ | | |Business Logic| |______________| ______________ | | | Repository | |______________| My views are going to generate my HTML to be sent to the user Business logic is where all the business logics are Repository is a layer to access the DB My idea is that the repository uses entities (that are basically the representation of the tables, in order to perform DB queries. The layers communicate between themselves using Business Objects, that are objects that represent the real-world-object itself. They can contain business rules and methods. The views build/use DTOs, they are basically objects that have the information required to be shown on the screen. They expect also this kind of object on actions and, before calling the business logic, they create BO. First question: what is your overall feeling about this architecture? I've used similar architecture for some projects and I always got this problem: If my view has this list to show : Student1, age, course, Date Enrolled, Already paid? It has information from different BO. How do you think one should build the structure? These were the alternatives I could think of: The view layer could call the methods to get the student, then the course it studies, then the payment information. This would cause a lot of DB accesses and my view would have the knowledge about how to act to generate this information. This just seems wrong for me. I could have an "adapter object", that has the required information (a class that would have a properties Student, Course and Payment). But I would required one adapter object for each similar case, this may get very bad for big projects. I still don't like them. Would you have ideas? How would you change the architecture to avoid this kind of problems? @Rory: I read the CQRS and I don't think this suits my needs. As taken from a link references in your link Before describing the details of CQRS we need to understand the two main driving forces behind it: collaboration and staleness That means: many different actors using the same object (collaboration) and once data has been shown to a user, that same data may have been changed by another actor – it is stale (staleness). My problem is that I want to show to the user information from different BO, so I would need to receive them from the service layer. How can my service layer assemble and deliver this information? Edit to @AndrewM: Yes, you understood it correctly, the original idea was to have the view layer to build the BOs, but you have a very nice point about the creation of the BO inside the business layers. Assuming I follow your advice and move the creation logic inside the business layer, my business layer interface would contain the DTOs, for instance public void foo(MyDTO object) But as far as I understand, the DTO is tightly coupled to each view, so it would not be reusable by a second view. In order to use it, the second view would need to build a specific DTO from a specific view or I would have to duplicate the code in the business layer. Is this correct or am I missing something?

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • Scenarios for Throwing Exceptions

    - by Joe Mayo
    I recently came across a situation where someone had an opinion that differed from mine of when an exception should be thrown. This particular case was an issue opened on LINQ to Twitter for an Exception on EndSession.  The premise of the issue was that the poster didn’t feel an exception should be raised, regardless of authentication status.  As first, this sounded like a valid point.  However, I went back to review my code and decided not to make any changes. Here's my rationale: 1. The exception doesn’t occur if the user is authenticated when EndAccountSession is called. 2. The exception does occur if the user is not authenticated when EndAccountSession is called. 3. The exception represents the fact that EndAccountSession is not able to fulfill its intended purpose - to end the session.  If a session never existed, then it would not be possible to perform the requested action.  Therefore, an exception is appropriate. To help illustrate how to handle this situation, I've modified the following code in Program.cs in the LinqToTwitterDemo project to illustrate the situation: static void EndSession(ITwitterAuthorizer auth) { using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) { try { //Log twitterCtx.Log = Console.Out; var status = twitterCtx.EndAccountSession(); Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } catch (TwitterQueryException tqe) { var webEx = tqe.InnerException as WebException; if (webEx != null) { var webResp = webEx.Response as HttpWebResponse; if (webResp != null && webResp.StatusCode == HttpStatusCode.Unauthorized) Console.WriteLine("Twitter didn't recognize you as having been logged in. Therefore, your request to end session is illogical.\n"); } var status = tqe.Response; Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } } } As expected, LINQ to Twitter wraps the exception in a TwitterQueryException as the InnerException.  The TwitterQueryException serves a very useful purpose through it's Response property.  Notice in the example above that the response has Request and Error proprieties.  These properties correspond to the information that Twitter returns as part of it's response payload.  This is often useful while debugging to help you understand why Twitter was unable to perform the  requested action.  Other times, it's cryptic, but that's another story.  At least you have some way of knowing in your code how to anticipate and handle these situations, along with having extra information to debug with. To sum things up, there are two points to make: when and why an exception should be raised and when to wrap and re-throw an exception in a custom exception type. I felt it was necessary to allow the exception to be raised because the called method was unable to perform the task it was designed for.  I also felt that it is inappropriate for a general library to do anything with exceptions because that could potentially hide a problem from the caller.  A related point is that it should be the exclusive decision of the application that uses the library on what to do with an exception.  Another aspect of this situation is that I wrapped the exception in a custom exception and re-threw.  This is a tough call because I don’t want to hide any stack trace information.  However, the need to make the exception more meaningful by including vital information returned from Twitter swayed me in the direction to design an interface that was as helpful as possible to library consumers.  As shown in the code above, you can dig into the exception and pull out a lot of good information, such as the fact that the underlying HTTP response was a 401 Unauthorized.  In all, trade-offs are seldom perfect for all cases, but combining the fact that the method was unable to perform its intended function, this is a library, and the extra information can be more helpful, it seemed to be the better design. @JoeMayo

    Read the article

  • Documentation and Test Assertions in Databases

    - by Phil Factor
    When I first worked with Sybase/SQL Server, we thought our databases were impressively large but they were, by today’s standards, pathetically small. We had one script to build the whole database. Every script I ever read was richly annotated; it was more like reading a document. Every table had a comment block, and every line would be commented too. At the end of each routine (e.g. procedure) was a quick integration test, or series of test assertions, to check that nothing in the build was broken. We simply ran the build script, stored in the Version Control System, and it pulled everything together in a logical sequence that not only created the database objects but pulled in the static data. This worked fine at the scale we had. The advantage was that one could, by reading the source code, reach a rapid understanding of how the database worked and how one could interface with it. The problem was that it was a system that meant that only one developer at the time could work on the database. It was very easy for a developer to execute accidentally the entire build script rather than the selected section on which he or she was working, thereby cleansing the database of everyone else’s work-in-progress and data. It soon became the fashion to work at the object level, so that programmers could check out individual views, tables, functions, constraints and rules and work on them independently. It was then that I noticed the trend to generate the source for the VCS retrospectively from the development server. Tables were worst affected. You can, of course, add or delete a table’s columns and constraints retrospectively, which means that the existing source no longer represents the current object. If, after your development work, you generate the source from the live table, then you get no block or line comments, and the source script is sprinkled with silly square-brackets and other confetti, thereby rendering it visually indigestible. Routines, too, were affected. In our system, every routine had a directly attached string of unit-tests. A retro-generated routine has no unit-tests or test assertions. Yes, one can still commit our test code to the VCS but it’s a separate module and teams end up running the whole suite of tests for every individual change, rather than just the tests for that routine, which doesn’t scale for database testing. With Extended properties, one can get the best of both worlds, and even use them to put blame, praise or annotations into your VCS. It requires a lot of work, though, particularly the script to generate the table. The problem is that there are no conventional names beyond ‘MS_Description’ for the special use of extended properties. This makes it difficult to do splendid things such ensuring the integrity of the build by running a suite of tests that are actually stored in extended properties within the database and therefore the VCS. We have lost the readability of database source code over the years, and largely jettisoned the use of test assertions as part of the database build. This is not unexpected in view of the increasing complexity of the structure of databases and number of programmers working on them. There must, surely, be a way of getting them back, but I sometimes wonder if I’m one of very few who miss them.

    Read the article

  • How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

    - by Ivan Kreimer
    I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

    Read the article

  • A more elegant way of embedding a SOAP security header in Silverlight 4

    - by Your DisplayName here!
    The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

    Read the article

  • ArchBeat Link-o-Rama Top 10 for October 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

    Read the article

  • std::vector::size with glDrawElements crashes?

    - by NoobScratcher
    ( win32 / OpenGL 3.3 / GLSL 330 ) I decided after a long time of trying to do a graphical user interface using just opengl graphics to go back to a gui toolkit and so in the process have had to port alot of my code to win32. But I have a problem with my glDrawElement function. my program compiles and runs fine until it gets to glDrawElements then crashes.. which is rather annoying right. so I was trying to figure out why and I found out its std::vector::size member not returning the correct amount of faces in the unsigned interger vector eg, "vector<unsigned int>faces; " so when I use cout << faces.size() << endl; I got 68 elements???? instead of 24 as you can see here in this .obj file: # Blender v2.61 (sub 0) OBJ File: '' # www.blender.org v 1.000000 -1.000000 -1.000000 v 1.000000 -1.000000 1.000000 v -1.000000 -1.000000 1.000000 v -1.000000 -1.000000 -1.000000 v 1.000000 1.000000 -0.999999 v 0.999999 1.000000 1.000001 v -1.000000 1.000000 1.000000 v -1.000000 1.000000 -1.000000 s off f 1 2 3 4 f 5 8 7 6 f 1 5 6 2 f 2 6 7 3 <--- 24 Faces not 68? f 3 7 8 4 f 5 1 4 8 I'm using a parser I created to get the faces/vertexes in my .obj file: char modelbuffer [20000]; int MAX_BUFF = 20000; unsigned int face[3]; FILE * pfile; pfile = fopen(szFileName, "rw"); while(fgets(modelbuffer, MAX_BUFF, pfile) != NULL) { if('v') { Point p; sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); cout << " p.x = " << p.x << " p.y = " << p.y << " p.z = " << p.x << endl; } if('f') { sscanf(modelbuffer, "f %d %d %d %d", &face[0], &face[1], &face[2], &face[3]); cout << "face[0] = " << face[0] << " face[1] = " << face[1] << " face[2] = " << face[2] << " face[3] = " << face[3] << "\n"; faces.push_back(face[0] - 1); faces.push_back(face[1] - 1); faces.push_back(face[2] - 1); faces.push_back(face[3] - 1); cout << face[0] - 1 << face[1] - 1 << face[2] - 1 << face[3] - 1 << endl; } } using this struct to store the x,y,z positions also this vector was used with Point: vector<Point>points; struct Point { float x, y, z; }; If someone could tell me why its not working and how to fix it that would be awesome I also provide a pastebin to the full source code if you want a closer look. http://pastebin.com/gznYLVw7

    Read the article

  • Need help partitioning when reinstalling Ubuntu 14.04

    - by Chris M.
    I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • Top 5 Reasons to Invest in Enterprise 2.0 Technologies

    - by kellsey.ruppel(at)oracle.com
    In 2010, Oracle's portal, content management, and collaboration solutions evolved rapidly, supported by increasingly deep integrations across Oracle Fusion Middleware and the entire Oracle stack. In light of these developments, we asked Vince Casarez, vice president of Enterprise 2.0 product management, for his top five reasons to invest in Enterprise 2.0 (E2.0) technologies--including real-world examples of businesses already realizing the benefits of next-generation E2.0 technologies. 1. Provide a modern user experience As E2.0 technologies gain widespread adoption, customers and employees expect intuitive Web experiences that are both interactive and community-based. By partnering with Oracle, Alcatel-Lucent Enterprise Group is already making that happen. With 76,000 employees and operations in more than 100 countries, the company wanted a streamlined, personalized user experience with more relevant content in fewer clicks. Working with Oracle, they created a global support portal that supports personalization and integration with Oracle Business Intelligence Enterprise Edition and Oracle E-Business Suite--and drives collaboration with tools such as wikis, blogs, and forums. Learn more about Alcatel-Lucent Enterprise Group's Global Support Portal in this Webcast. 2. Improve productivity and collaboration As E2.0 technologies mature, Oracle anticipates companies moving beyond the idea of simply creating yet another Facebook-like destination for its employees, and instead shaping work environments around specific business tasks. After rapid growth--both organic and through acquisition--construction and infrastructure services leader Balfour Beatty found itself with multiple homegrown intranet sites with very minimal content-sharing capabilities. Today, thanks to Oracle WebCenter Suite, Oracle WebCenter Spaces, Oracle WebCenter Services, and Oracle Universal Content Management, Balfour Beatty is benefiting from collaborative workspaces, a central place to use and work with documents, and unified search across content. 3. Leverage business processes and applications Modern portals are now able to integrate users, content, and business processes in unprecedented ways. To take advantage of these new possibilities, leading dairy provider Land O'Lakes has implemented a fully integrated ERP solution together with Oracle's ECM platform. As a result, Land O'Lakes has been able to achieve better information management and compliance, increased adoption rates for enterprise tools, and increased business process efficiency thanks to more effective information sharing and collaboration. 4. Enhance customer and supplier relationships Companies have begun to move beyond the idea that E2.0 simply means enabling customer reviews or embedding chat functionality. They are taking E2.0 to the next level and providing interactive experiences for their customers. For example, to enhance customer and supplier relationships, Wind River, a global leader in device software optimization, successfully partnered with Oracle to: Integrate ERP and ECM content to provide customers the latest and most relevant support information for products they own Enable customers to personalize their support experience and receive updates regarding patches, application notes, and other relevant content Enable discussions, wikis, and blogs for more efficient collaboration 5. Increase business visibility and responsiveness By strategically embedding collaboration and communication tools into specific business contexts, companies significantly increase visibility into changing business conditions--and can respond much more agilely. Texas A&M University System--one of the largest systems of higher education in the U.S.--partnered with Oracle to create a unified repository that would enable the retrieval of research and grant data from disparate systems via an Enterprise 2.0 user interface. By enabling researchers to customize their own portals with easy-to-use tools, they have also been able to significantly reduce their reliance on the IT department. Learn how other Oracle customers are leveraging Enterprise 2.0 technologies.

    Read the article

  • News From EAP Testing

    - by Fatherjack
    There is a phrase that goes something like “Watch the pennies and the pounds/dollars will take care of themselves”, meaning that if you pay attention to the small things then the larger things are going to fare well too. I am lucky enough to be a Friend of Red Gate and once in a while I get told about new features in their tools and have a test copy of the software to trial. I got one of those emails a week or so ago and I have been exploring the SQL Prompt 6 EAP since then. One really useful feature of long standing in SQL Prompt is the idea of a code snippet that is automatically pasted into the SSMS editor when you type a few key letters. For example I can type “ssf” and then press the tab key and the text is expanded to SELECT * FROM. There are lots of these combinations and it is possible to create your own really easily. To create your own you use the Snippet Manager interface to define the shortcut letters and the code that you want to have put in their place. Let’s look at an example. Say I am writing a blog about something and want to have the demo code create a temporary table. It might looks like this; The first time you run the code everything is fine, a lovely set of dates fill the results grid but run it a second time and this happens.   Yep, we didn’t destroy the temporary table so the CREATE statement fails when it finds the table already exists. No matter, I have a snippet created that takes care of this.   Nothing too technical here but you will see that in the Code section there is $CURSOR$, this isn’t a TSQL keyword but a marker for SQL Prompt to place the cursor in that position when the Code is pasted into the SSMS Editor. I just place my cursor above the CREATE statement and type “ifobj” – the shortcut for my code to DROP the temporary table – which has been defined in the Snippet Manager as below. This means I am right-away ready to type the name of the offending table. Pretty neat and it’s been very useful in saving me lots of time over many years.   The news for SQL Prompt 6 is that Red Gate have added a new Snippet Command of $PASTE$. Let’s alter our snippet to the following and try it out   Once again, we will type type “ifobj” in the SSMS Editor but first of all, highlight the name of the table #TestTable and copy it to your clipboard. Now type “ifobj” and press Tab… Wherever the string $PASTE$ is placed in the snippet, the contents of your clipboard are merged into the pasted TSQL. This means I don’t need to type the table name into the code snippet, it’s already there and I am seeing a fully functioning piece of TSQL ready to run. This means it is it even easier to write TSQL quickly and consistently. Attention to detail like this from Red Gate means that their developer tools stay on track to keep winning awards year after year and help take the hard work out of writing neat, accurate TSQL. If you want to try out SQL Prompt all the details are at http://www.red-gate.com/products/sql-development/sql-prompt/.

    Read the article

  • Problem with creating a deterministic finite automata (DFA) - Mercury

    - by Jabba The hut
    I would like to have a deterministic finite automata (DFA) simulated in Mercury. But I’m s(t)uck at several places. Formally, a DFA is described with the following characteristics: a setOfStates S, an inputAlphabet E <-- summation symbol, a transitionFunction : S × E -- S, a startState s € S, a setOfAcceptableFinalStates F =C S. A DFA will always starts in the start state. Then the DFA will read all the characters on the input, one by one. Based on the current input character and the current state, there will be made to a new state. These transitions are defined in the transitions function. when the DFA is in one of his acceptable final states, after reading the last character, then will the DFA accept the input, If not, then the input will be is rejected. The figure shows a DFA the accepting strings where the amount of zeros, is a plurality of three. Condition 1 is the initial state, and also the only acceptable state. for each input character is the corresponding arc followed to the next state. Link to Figure What must be done A type “mystate” which represents a state. Each state has a number which is used for identification. A type “transition” that represents a possible transition between states. Each transition has a source_state, an input_character, and a final_state. A type “statemachine” that represents the entire DFA. In the solution, the DFA must have the following properties: The set of all states, the input alphabet, a transition function, represented as a set of possible transitions, a set of accepting final states, a current state of the DFA A predicate “init_machine (state machine :: out)” which unifies his arguments with the DFA, as shown as in the Figure. The current state for the DFA is set to his initial state, namely, 1. The input alphabet of the DFA is composed of the characters '0'and '1'. A user can enter a text, which will be controlled by the DFA. the program will continues until the user types Ctrl-D and simulates an EOF. If the user use characters that are not allowed into the input alphabet of the DFA, then there will be an error message end the program will close. (pred require) Example Enter a sentence: 0110 String is not ok! Enter a sentence: 011101 String is not ok! Enter a sentence: 110100 String is ok! Enter a sentence: 000110010 String is ok! Enter a sentence: 011102 Uncaught exception Mercury: Software Error: Character does not belong to the input alphabet! the thing wat I have. :- module dfa. :- interface. :- import_module io. :- pred main(io.state::di, io.state::uo) is det. :- implementation. :- import_module int,string,list,bool. 1 :- type mystate ---> state(int). 2 :- type transition ---> trans(source_state::mystate, input_character::bool, final_state::mystate). 3 (error, finale_state and current_state and input_character) :- type statemachine ---> dfa(list(mystate),list(input_character),list(transition),list(final_state),current_state(mystate)) 4 missing a lot :- pred init_machine(statemachine :: out) is det. %init_machine(statemachine(L_Mystate,0,L_transition,L_final_state,1)) :- <-probably fault 5 not perfect main(!IO) :- io.write_string("\nEnter a sentence: ", !IO), io.read_line_as_string(Input, !IO), ( Invoer = ok(StringVar), S1 = string.strip(StringVar), (if S1 = "mustbeabool" then io.write_string("Sentenceis Ok! ", !IO) else io.write_string("Sentence is not Ok!.", !IO)), main(!IO) ; Invoer = eof ; Invoer = error(ErrorCode), io.format("%s\n", [s(io.error_message(ErrorCode))], !IO) ). Hope you can help me kind regards

    Read the article

  • Passing data between the VirtualBox Host and the Guest

    - by Fat Bloke
    Here's a good question: "How can you figure out the VM name from within the VM itself?" While this data is not automatically available, the general purpose, and very powerful VirtualBox "GuestProperty" APIs can be used from the host and guest to pass arbitrary data, in key/value pairs format, in and out of the guest. Note that this does require that the VirtualBox Guest Additions have been installed in the guest. To play with this, try using the "VBoxManage" command line on your VirtualBox host machine, and "VBoxControl" in the guest. Host syntax VBoxManage guestproperty get <vmname>|<uuid> <property> [--verbose] VBoxManage guestproperty set <vmname>|<uuid> <property> [<value> [--flags <flags>]] VBoxManage guestproperty enumerate <vmname>|<uuid> [--patterns <patterns>] VBoxManage guestproperty wait <vmname>|<uuid> <patterns> [--timeout <msec>] [--fail-on-timeout]   Guest syntax VBoxControl.exe guestproperty        get <property> [-verbose] VBoxControl.exe guestproperty        set <property> [<value> [-flags <flags>]] VBoxControl.exe guestproperty        enumerate [-patterns <patterns>] VBoxControl.exe guestproperty        wait <patterns>                                      [-timestamp <last timestamp>]                                      [-timeout <timeout in ms>  So to solve our problem above, we set the vm name in the Host system on an arbitrary key like this: $ VBoxManage guestproperty set "Windows 7 (x64)" /MyData/VMname "Windows 7 (x64)" And within the guest we can use: C:\Program Files\Oracle\VirtualBox Guest Additions>VBoxControl.exe guestproperty get /MyData/VMname Oracle VM VirtualBox Guest Additions Command Line Management Interface Version 4.1.14 (C) 2008-2012 Oracle Corporation All rights reserved. Value: Windows 7 (x64) The GuestProperty API is pretty powerful, so for the interested, get more info in the User Manual. - FB 

    Read the article

  • New Version 3.1 Endeca Information Discovery Now Available

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Business User Self-Service Data Mash-up Analysis and Discovery integrated with OBI11g and Hadoop Oracle Endeca Information Discovery 3.1 (OEID) is a major release that incorporates significant new self-service discovery capabilities for business users, including agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI.  · Self-Service Data Mashup and Discovery Dashboards: business users can combine information from multiple sources, including their own up-loaded spreadsheets, to conduct analysis on the complete set.  Creating discovery dashboards has been made even easier by intuitive drag-and drop layouts and wizard-based configuration.  Business users can now build new discovery applications in minutes, without depending on IT. · Enhanced Integration with Oracle BI: OEID 3.1 enhances its’ native integration with Oracle Business Intelligence Foundation. Business users can now incorporate information from trusted BI warehouses, leveraging dimensions and attributes defined in Oracle’s Common Enterprise Information Model, but evolve them based on the varying day-to-day demands and requirements that they personally manage. · Deep Unstructured Analysis: business users can gain new insights from a wide variety of enterprise and public sources, helping companies to build an actionable Big Data strategy.  With OEID’s long-standing differentiation in correlating unstructured information with structured data, business users can now perform their own text mining to identify hidden concepts, without having to request support from IT. They can augment these insights with best in class keyword search and pattern matching, all in the context of rich, interactive visualizations and analytic summaries. · Enterprise-Class Self-Service Discovery:  OEID 3.1 enables IT to provide a powerful self-service platform to the business as part of a broader Business Analytics strategy, preserving the value of existing investments in data quality, governance, and security.  Business users can take advantage of IT-curated information to drive discovery across high volumes and varieties of data, and share insights with colleagues at a moment’s notice. · Harvest Content from the Web with the Endeca Web Acquisition Toolkit:  Oracle now provides best-of-breed data access to website content through the Oracle Endeca Web Acquisition Toolkit.  This provides an agile, graphical interface for developers to rapidly access and integrate any information exposed through a web front-end.  Organizations can now cost-effectively include content from consumer sites, industry forums, government or supplier portals, cloud applications, and myriad other web sources as part of their overall strategy for data discovery and unstructured analytics. For more information: OEID 3.1 OTN Software and Documentation Download And Endeca available for download on Software Delivery Cloud (eDelivery) New OEID 3.1 Videos on YouTube Oracle.com Endeca Site /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >