Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 516/2753 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

  • Black Screen when Computer Boots

    - by BlueRaja
    I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

    Read the article

  • Intel 520 SSD drives not working with lsi controller on VMware esxi 5

    - by Michael
    We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

    Read the article

  • Folder Redirection - Explorer requires manual refresh

    - by Pete
    Hello, I am having an issue where - when a users my documents folder is redirected to a DFS share, windows explorer requires a manual refresh after creating a new folder, file, etc. (Interestingly, not when making a new briefcase) I have tried a number of MS knowledge base articles, a hot-fix and a registry change, all with no success. (( http:// support.microsoft.com/?kbid=823291 ; http:// support.microsoft.com/kb/873392 )) The problem only occurs when going through the my documents icon. If I map a home drive for the user to the exact same location (IE - H:\DFS\user\documents) , open that drive and make new folders, then there is no problem. Mapping my documents to H:\ also resolves the issue, however, as we need folder sync and people logging on off site with cached profiles this is not a workable solution (as H: will not map and there will be no access to their docs.) Has anyone managed to figure a fix for this? Thanks, Pete.

    Read the article

  • Windows XP cannot execute binary file on Network Share

    - by angerman
    I'm having a Network Share provided by a Mac OS X Lion Server on a recent Mac Mini Server (CIFS / SMB); mounting the share in Windows (XP) is no problem, reading and writing neither. But when ever I try to execute an executable .exe, Windows complains that it's not a valid win32 executable. Copying the file from the network share to the desktop or some other local location, allows the file to be subsequently executed. Pointers to what the root cause of this problem may be are greatly appreciated.

    Read the article

  • Copy-paste stops working on Windows 7

    - by earlyadopter
    Copy-paste functionality stops working after about an hour after each reboot on a Windows 7 64-bit system. Running Google Chrome (with gmail and few other tabs open like Calendar, Reader), MS Outlook (which I don't think has anything to do with the problem — I saw it when outlook was off as well), iTunes (9.1.1.12 if it matters). Would appreciate hints where and what for to look in a registry, and ideas for possible fix. That is not an Internet Explorer problem (I don't even run it) — it happens in all applications. Neither Ctrl-C/Ctrl-V nor context menu right-click Copy-Paste (actually, nothing happens on Copy, so there is nothing in a clipboard to Paste) are working. Drag-and-Drop (where supported) continues working though.

    Read the article

  • IIS Server on XP Machine with tweaked registry and services

    - by user420667
    I have been trying for some time now to setup a webapp on my XP machine at home. Prior to doing this, I had tweaked the registry settings, fiddled with disabling and enabling servies, without recording what I tweaked, which I imagining could be what's causing the problem. I don't want to "reboot" to factory settings, although I suppose that would be nice to know how to do as well. I am more interested in finding out what settings could have influenced the behavior, and who I could contact / what information I could send them that would aid in solving the problem. Thanks.

    Read the article

  • Windows Vista: Networking can only connect "local only"

    - by Damien
    I am attempting to debug a problem on a Windows Vista laptop - not mine! Until just recently (last week or so), it was operating normally for about 4 years :) The problem is that I am having issues connecting to the local network (a basic wireless home router; more later) and the internet (via ADSL). This is both for wired [Broadcom chipset] and wireless [Intel chipset]. I will elaborate further later. To detail the network. I have three other clients (HTC phone, Ubuntu 12.04 desktop [wired] and Ubuntu 10.04 laptop [wireless]), all of whom are able to connect to the network and internet normally. A windows 7 virtual machine running on said desktop connects normally. I have tried two different wireless routers - Netgear DG834G and Netgear DGN3500. The same error mode is common to both. Updating the firmware to the latest on both routers does not help. Overall, it seems safe to say it's localised to the laptop in question. I do not have another Vista client to test with. The specific symptoms are as follows: When "connected", it says "Local Only", and says it cannot connect to the internet. This is true for both wired and wireless. It can get an IP address (192.168.0.5), and the router (192.168.0.1) reports that it can see the device. When I try to ping, I get the following results: ping 192.168.0.1 - (router) all packets lost ping 192.168.0.5 - (laptop's address) OK ping 192.168.0.4 - (desktop) all packets lost Pinging from the desktop to the problematic laptop results in "From 192.168.0.4 icmp_seq=1 Destination Host Unreachable" The most promising "fix" from trawling forums is KB928233 which does not work for me. The problem is persistent across reports (both full shutdown and hibernate) so it appears not to be sleep related. I am not a regular vista user, though I can fumble my way about a bit. Is there any other suggestions as to what I should do? Is there any further information I can provide?

    Read the article

  • Linux openSUSE 11.2 on VAIO Z890T

    - by alfredozn
    I have a VAIO Z-series (VGN-Z890T) and I want to install openSUSE 11.2. I found some guides to fix the problem for the video card switch, but all for older models, those preconfigured with windows vista. It looks like newer model use a different bios configuration to support hot swap between cards in Windows 7 and this change breaks the solution to my problem. I'm not an experienced linux user, but i was using it recently on my old computer ind definitively I want it on my laptop. I installed openSUSE once and i was trying and trying to solve it until I finished reinstall again and use a fresh installation. My question is: Does anyone has installed and configured successfully openSUSE on one of the latest vaio z laptops???

    Read the article

  • How to enable the php 5.4.x version on Mountain Lion

    - by skiabox
    I have installed the latest php version on my mountain lion system using these instructions (http://mac.tutsplus.com/tutorials/server/upgrading-the-native-php-installation-on-os-x-mountain-lion/). I even put /usr/local/bin first in my path variable, so when I run php -v at the command line I get php v5.4.x The problem is that when I run a simple script (with the phpinfo() function inside) the page tells me that I am running the old 5.3.x php version that comes pre-installed with mac os mountain lion. I even tried to restart apache, but the problem remains. Any ideas on this one? Thank you.

    Read the article

  • jetty crash trouble shooting

    - by user886356
    Recently I switch to amazon ec2 + jetty9 + oracle jdk7_u45 for cost saving. I found the jetty server is very unstable. It crash randomly without any jvm dump file. Tried to enable stdout with the dumpBeforeStop=TRUE. It won't append the dump messages to stderrout.log before crash. Seems it isn't related to OutOfMemoryError as I have enabled the gc verbose options and found it still has many available memory before crash. : 162604K-3340K(176960K), 0.2240040 secs] 248332K-89101K(373568K), 0.2736860 secs] [Times: user=0.01 sys=0.01, real=0.28 secs] Tried to downgrade to jetty8 with different jdk combination (jdk6 / jdk7). Still got the same problem. Tried to remove all jvm options and using "sudo java -jar start.jar" to run jetty. Still crash. Any other way to shoot the problem?

    Read the article

  • How do I tell sudo to write files with a umask of 0022?

    - by mipadi
    I recently upgrading to Snow Leopard. I have noticed that some files written by MacPorts are installed with the wrong permission -- they are written with a umask of 0077. I think I have narrowed down the problem: The port command is invoked via sudo. My .bashrc file specifies a umask of 0077. On older versions of OS X (10.5 and below), sudo used the umask of the root user (which was 0022); however, now it uses my umask of 0077. Is there anyway to have sudo use the old behavior? Right now, it's kind of annoying because I have to use sudo to run simple commands like port installed, port outdated, etc. (The problem is described in more detail in this MacPorts ticket.) Edit I discovered the umask option for sudo, and in /etc/sudoers I added the following line: Defaults umask=0022 However, this did not function as desired, because the real umask used by sudo is the union of the user mask with this default mask.

    Read the article

  • 'ttest' function not working in Matlab

    - by Harpreet
    When I am using this statement in Matlab in my computer then its giving error as follow: [h,p,ci]=ttest(randn(100,1),0.1) Error: ??? Error using ==> nanmean Too many input arguments. Error in ==> ttest at 104 xmean = nanmean(x,dim); However if I use the same statement in Matlab in another computer, then its working fine and giving results. Do you know what could be the problem? I am posting this question here suspecting it to be some software problem with Matlab. Correct me if I am wrong.

    Read the article

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • HP Color LaserJet 2605dn color alignment issue

    - by robertvt
    We have a HP Color LaserJet 2605dn at work that recently lost its mind. The red and blue colors are offset from where they should be and producing a rather trippy 3D look. I've performed a manual calibration through the menus and poked at just about everything I could find. These toner cartridges are not new (as you can see they're about 50% used) but only just recently started this problem. They were working great up until this error appeared. It happens on mac, pc, and via the printer menu printouts so I don't think it's a driver problem. The printer has been restarted and reset and is running the newest firmware. Anyone have any ideas? Here's a pic http://img16.imageshack.us/img16/9984/photoon20090914at1149.jpg

    Read the article

  • OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

    - by Frank ter V.
    First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

    Read the article

  • install git on RHEL3

    - by Dan Littlejohn
    having a problem installing git on redhat enterprise 3. When I try and install the rpm it gives a circular dependency problem. [root@tflaus001 tmp]# rpm -i git-1.5.2.1-1.el3.rf.i386.rpm warning: git-1.5.2.1-1.el3.rf.i386.rpm: V3 DSA signature: NOKEY, key ID 6b8d79e6 error: Failed dependencies: perl(Git) is needed by git-1.5.2.1-1.el3.rf [root@tflaus001 tmp]# rpm -i perl-Git-1.5.2.1-1.el3.rf.i386.rpm warning: perl-Git-1.5.2.1-1.el3.rf.i386.rpm: V3 DSA signature: NOKEY, key ID 6b8d79e6 error: Failed dependencies: git = 1.5.2.1-1.el3.rf is needed by perl-Git-1.5.2.1-1.el3.rf perl(Error) is needed by perl-Git-1.5.2.1-1.el3.rf can anyone give me an idea of how to fix this or what I need to add to yum.conf to fix this?

    Read the article

  • How restore qmail backup files

    - by Maysam
    We are using qmail as our mail application on a linux server. A few weeks ago our server crashed and we had everything installed from scratch and our users started to send & receive email again. The problem is they have lost their old emails. We have a back up of the whole qmail directory. But I don't know how to restore the old emails without losing the new ones. It's worth mentioning that I don't have any problem with restoring old sent mails. When I copy email files into .sent-mail/cur directory, I have them restored in sent box of users, but restoring files in /cur directory doesn't work for inbox emails and I can't get them restored.

    Read the article

  • Changing location of ClamAV logging files

    - by GrumpyCanuck
    I've run into a weird problem with ClamAV that I have been unable to resolve, due to a incredibly non-informative error message. I've installed ClamAV via aptitude on an Ubuntu box (ClamAV 0.96.5/13202 according to the system) up on EC2 and it is 100% stock. We have an additional drive mounted under /mnt where we put all our log files. When I start it up with the log files in the default location, it runs just fine. However, if I change the configuration file from /var/log/clamav/clamav.log to /mnt/clamav/clamav.log I get the error ERROR: Can't open /mnt/clamav/clamav.log in append mode (check permissions!). ERROR: Can't initialize the internal logger It's the same file with the same permissions on it, just in a different location. Any thoughts or tips on how to resolve this problem would be greatly appreciated.

    Read the article

  • Win Server 2008 force kerberos setting

    - by ftiaronsem
    I am currently facing the problem that a linux machine running Ubuntu 10.04 LTS with samba and winbindd installed is unable to join a Domain, that is managed by a Windows 2008 DC. The linux config, is probably alright, since I have successfully used it at multiple sites, running 2008 as well as 2003 DCs. The error I get ("libads/kerberos.c: Join to domain is not valid. Client credentials have been revoked"), indicates that there is a kerberos problem. Normally the linux box is supposed to authenticate via NTLM and is configured that way. The only reason I can image why it tries kerberos is that the DC is forcing it. Do you know whether there is any setting in the security policies of a window 2008 server, that would completely block NTLM, forcing kerberos? If so, where can I find this setting?

    Read the article

  • Pinnacle Studio 14 Importer crashes on Windows 7 x64

    - by Tuminoid
    Pinnacle Studio 14 Importer crashes on Windows 7 x64, thus I'm unable to import videos from my camcorder. I've Googled around and it seems to be a problem with x64 support in the program, but there is no info if it can somehow be remedied with Compatibility settings, XP mode. Further Googling got me this link, and none of the tips in site it links help. I've got no idea what ObjectDoct Plus 2 is (no a program or service installed by that name) which he claims causes the problem. Is that ObjectDoct critical to Pinnacle Studio and how to get rid of it (or any other advice how to make Studio 14 work on x64). UPDATE: 1) XP mode doesn't help as it doesn't handle Firewire, which is how my Canon HV20 must be connected to transfer HDV from tape. 2) I don't have that ObjectDock installed. 3) I don't wanna re-buy PS15 just to get this solved as PS14 should be able to do it.

    Read the article

  • Nginx, logrotate and empty files

    - by user37887
    Hi. I have a problem with nginx/logrotate. The problems is that nginx is logging access to 2 files (main and data). I have the following contrab setting: 0 * * * * /usr/sbin/logrotate -f /home/orwell/orwell-setup/bin/logrotate-nginx And the file "logrotate-nginx" has the following content: /tmp/data.log { rotate 90 daily missingok notifempty size 1 sharedscripts postrotate [ ! -f /tmp/nginx.pid ] || kill -USR1 `cat /tmp/nginx.pid` MORE THINGS endscript } /tmp/main.log { rotate 90 daily missingok notifempty size 1 sharedscripts postrotate [ ! -f /tmp/nginx.pid ] || kill -USR1 `cat /tmp/nginx.pid` MORE THINGS endscript } The work is done in the two files, but there is a problem that nginx stops logging into those files. Both files are created, but they are empty. Any ideas why nginx stop logging info to both files?

    Read the article

  • GIMP: change the exact color on the image - OK, but transparency disappears

    - by Haradzieniec
    There is no problem for me now to change color for pixels of the same color: I click on "Select by Color Tool"(Ctrl+O). The pixels of the same color are selected now. Then I press Ctrl+,. The selected pixels are white now (the white color is taken from a foreground color). The problem is the transparency. The green color I want to change to the white one has transparency. Once I use my method, the transparency disappears so all my-green-color with any transparency becomes white and without transparency. How do I keep the transparency by using my method? My picture is in .png format.

    Read the article

  • how I can Specifying tcpreplay speed

    - by herzl shemuelian
    I am tring to Specify tcpreplay speed but I can't do it this is my detail of test: $tcpreplay -V tcpreplay version: 3.4.4 (build 2450) 1)$ tcpreplay -i %0 -p 100 -L 500 _udp_only.pcap Actual: 500 packets (42247 bytes) sent in 5.05 seconds.Rated: 8365.7 bps, 0.06 Mbps, 99.01 pps s 2)$ tcpreplay -i %0 -p 1000 -L 5000 _udp_only.pcap Actual: 5000 packets (427710 bytes) sent in 5.19 seconds. Rated: 82410.4 bps, 0.63 Mbps, 963.39 pps //here is problem I stay in 966.00 pps 3)$ tcpreplay -i %0 -p 10000 -L 50000 _udp_only.pcap Actual: 50000 packets (4322559 bytes) sent in 51.76 seconds.Rated: 83511.6 bps, 0.64 Mbps, 966.00 pps I have same problem when I try to Specify --mbps for 8600 packets 86 byte avg for each packet -M0.086 -L 860 ---- Rated: 10812.9 bps, 0.08 Mbps, 127.22 pps -M0.86 -L 860 ---- Rated: 83062.5 bps, 0.63 Mbps, 977.27 pps -M0.86 -L 8600 ---- Rated: 82554.9 bps, 0.63 Mbps, 965.21 pps why and how I can to Specify speed? I use OS windows7

    Read the article

  • Can't Shut Down computer with windows 8 Release Preview

    - by Bram Winda
    I downloaded Release Preview and installed it. I have a problem when I shut down the computer. After I press windows key + I Power Shut Down, a box pops up titled "Winlogon.exe - No Disk. Then under that is the message "There is no disk in the drive. Please insert a disk into Drive G". After hitting the retry button a couple of different times the screen finally goes dark. When I was going to turn it back on, I noticed the Power Button was still list. The only way to do a complete Shutdown is to hold in the power button directly. How do I fix this problem?

    Read the article

  • Some DHCP clients end up with wrong DNS server

    - by Nic Waller
    The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

    Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >