Search Results

Search found 17990 results on 720 pages for 'virtualization option'.

Page 52/720 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • What are the benefits of full VDI over Remote Desktop Services?

    - by Doug Chase
    We're talking about piloting VDI here, but the more research I do, the more it seems like it would make more sense just to upgrade and expand our TS (RDS) environment. I feel like you can pull off more sessions per core on RDS than on any VDI solution I've looked at. Is this the case? Is there a decision matrix anywhere describing the benefits of using full virtualized desktops over using a remote desktop farm? We need good video performance for clinical imaging - will this work better on one infrastructure or the other? (Does this question have a specific enough answer for it to be on SF? Regardless, I feel like having this here will be helpful for someone in the future...)

    Read the article

  • Are there any generic KVM over IP cards/chips for motherboards without any such capability?

    - by eek142
    I have a remote server that doesn't have any IP KVM capabilities, meaning I can't remotely power cycle it or access the BIOS. I saw that ASUS offers something for their motherboards here: http://www.asus.com/Server_Workstation/Accessories/ASMB5iKVM/ But is there anything like this available for other motherboards? Even something that I could stash away somewhere in a hard drive bay that simply plugs into the board would be great.

    Read the article

  • virt-viewer slower than virt-manager when viewing

    - by map7
    I've got a thin client server in which I have a few VM's for users under KVM which I manage through virt-manager. What I've noticed is if I start a VM guest on a thin client using the command 'virt-viewer ' then the guest is painfully slow to move around. However if on the same thin client I start the same guest VM through virt-manager it's fast. What are the differences here? Can I start a VM without having the user load up virt-manager and double click on their VM? Should I be looking at using splice in virt-viewer instead of VNC which is what I currently use?

    Read the article

  • Is it possible to have a computer run two OS's in memory at the same time?

    - by Hebon
    I'm sick of needing to reboot my computer every time I wish to use another OS, or run a virtual machine that skimps on power. With the onset of large amounts of memory for computers nowadays I began to think that there must be some way to run two OS's in memory with a way to switch between the two. In my mind, it doesn't seem too difficult; a compatibility layer boots up after bios, which in turn boots to OS1. While in OS1, software is run that triggers a save to ram boots back to the compatability layer, and then boots to OS2. This way, the OS's can be used side by side and boot times are cut drastically short since both OSs are already in ram. Both OS's have their own designated and protected memory so there is no problem there... I mean, it seems fine, but no one has done it, so there must be some reason as to why. I would love some insight into this please.

    Read the article

  • high virtual memory usage in openvz?

    - by freedrull
    We're having a lot of memory problems on a new OpenVZ box. It is supposed to have 1 gig of memory, I'm not sure how much of that is burstable or guaranteed memory. Programs in general seem to take up more virtual memory than they do on my box at home, and on our other OpenVZ box. I wrote this simple C program: #include <stdio.h> #include <stdlib.h> int main(){ char *thingy = malloc(500); getchar(): return 0; } So it simply allocates 500 bytes and then returns. I ran the program on 3 computers. On my home machine, and our other OpenVZ box it shows about 1k bytes of virtual memory being used. On the new problematic machine its about 3k. I know this is just virtual memory and not resident memory, but why is this machine allocating so much virtual memory? Are there some settings I need to adjust to the OpenVZ memory settings? I tried changing the stack size with ulimit -s 256 and restarting some demons, but I still saw the same results. I'm doing all of my monitoring with htop, is this even a good program to use with a OpenVZ vps? I've read I should be parsing the output of /proc/user_beancounters intead or something.

    Read the article

  • Sophos UTM in Hyper-V

    - by TheD
    So, I had a previous thread about this Virtualizing Firewalls/UTM. Essentially, I have configured what I think would work, but networking isn't my strong point! Two Virtual Adapters - with IP addresses 192.168.0.2 (External) and 192.168.0.3 (Internal) respectively. The External Adapater looks at 192.168.0.1 (my Zyxel) for it's default gateway. The Internal Adapter, 192.168.0.3, which is what the Sophos UTM listens on, has it's default gateway set to 192.168.0.2, the IP of the External Lan interface. So, PC (192.168.0.11, DHCP) --> (LAN) --> Switch --> 192.168.0.3 (Internal LAN Interface IP) --> Sophos UTM --> 192.168.0.2 (External LAN Interface IP) --> 192.168.0.1 --> Internet Would this be the correct setup, or am I completely out of the game here? Cheers!

    Read the article

  • Latency in Sending and Receiving Files From Amazon EC2 - Justification

    - by Adroidist
    I am facing a huge delay while uploading and downloading files from my Windows Amazon EC2 server to my android device. It takes around 50 seconds to upload then download 500 Kbytes image. My location is in asia and the server is is US-East. I pinged the server from my android and obtained values around 500 ms for RTT. Is this normal? How is this explained? I tried this website: http://cloudharmony.com/speedtest/run and obtained that downloading 270 Kbytes file takes around 20 seconds. How is this delay justified?

    Read the article

  • Instabilities with Bridged and bonded interfaces

    - by Henry-Nicolas Tourneur
    I did post yesterday to get a working setup with several bridged interfaces used for virtual machines (KVM/libvirt). One of the bridged interface is just using eth3 as its ports while the second one (public traffic) is using an ethernet bonded interface. That setup is working but not all the time ! I can start a download from a vm, then it will stop and freeze! So I don't know if my bridge parameters are correct, could you check the below config ? iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.255 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.255 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.255 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.255 And yes, it also sometimes speaks about martian on the host: kernel: [249146.055172] martian source 10.160.0.17 from 10.160.0.10, on dev vnet2 kernel: [249146.073122] ll header: ff:ff:ff:ff:ff:ff:54:52:00:76:c3:5c:08:06

    Read the article

  • Changing the mac address in a libvirt xml config file breaks network connectivity for the guest

    - by foob
    I'm using Xen with libvirt and trying to set it up on a bridged interface. I am able to install an OS and everything works as I would expect. If I save the xml output from "virsh dumpxml guest", edit the mac address for the interface, and then define the domU with this new xml file I find that traffic is no longer forwarded from the vif0.0 interface to br0. The ifcfg-eth0 file on the guest was automatically updated to reflect the new mac address and the ifconfig output looks the same. Does anyone know why this is happening or how to properly change the mac address for a libvirt configuration?

    Read the article

  • Can't start my Windows XP Virtual Machine: Insufficient Disk Space

    - by Rob
    Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

    Read the article

  • Limiting Sybase ASE 15 CPU usage on VM

    - by reiniero
    I've set up a single CPU Sybase ASE 15.7 test/hobby/experimentation system on a Debian Squeeze x64 KVM VM. I notice the CPU load goes to 100% and stays there. Definitely not a Sybase guru, only interested to see if some programs I'm running work on the database. Looking at Sybase docs it seems ASE detects the machine is idle and then takes over all processing just waiting for a connection (and if needed, doing some housekeeping apparently). Normally that would be fine but as it is running in a VM it's taking away processor resources other VMs could use - and the increased fan noise of the PC near my desk annoy me. I've tried to remedy this: set the "runnable process search count" parameter from DEFAULT (2000 IRC) to 3 in /opt/sybase/ASE-15_0/SYBASE.cfg from http://sybase.reygrobellet.com/tutorials/install_sybase_vb/standalone04_configure_oralin11#TOC-Configure-kernel I added this to my /etc/init.d/sybase startup script: echo 0 /proc/sys/kernel/randomize_va_space (though I don't think it'll make much difference) How can I tell Sybase to "behave" and not hog the processor - I don't mind reduced performance.

    Read the article

  • Multiple VM environment for developing/testing

    - by Hippo
    I was asked to create a setup for automated deployment, configuration, installation/updates of websites. A bunch of small websites will be bundled on one server. If more website will come up a new server will be created... I decided to us chef for this task. All servers will be running Ubuntu at the same version and configuration. The actual question: Everything needs to be tested properly before starting live deployment, so my question is: What is the best virtualisation tool to run multiple (5 - 10) virtual machines on a Ubuntu Laptop? Requirements: easy setup, fast (clone/snapshot of VMs) All VMs should be easily connected to the internet and should be able to communicate to each other (Open-Source / free would be great) So far I looked into: Virtual box is more for Desktop virtualisation, Cloning not possible, every new machine needs to be installed VMware Player Any suggestions? If there are any question about what I am doing please comment on this question, I will answer as soon as possible. This question is not about the actual set up, it is about a nice working environment.

    Read the article

  • How is virtual machine port opening works

    - by Xianlin
    I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

    Read the article

  • specify temp folder for msi extracted files used for installation

    - by Binoj Antony
    I was recently installing Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1 to create my build server on a VM (Windows 2003 R2 Std), I was wondering that it would be nice to specify the temporary folder for the files being extracted by MSI for use during the installation. This should ideally work for any MSIs. I have some more virtual hard disks I have attached to this VMs, to point the temporary folder for MSI to one of these virtual hard disks would be quite productive since I can remove/discard this virtual hard disk later. Compacting the C drive VHD is a pain, and does not always reclaim space correctly. I tried changing the %temp% and tmp environment variable with no effect? Or is there any concrete/alternative solution to this type of problem? References: TempFolder Property ?? Windows Installer Wiki

    Read the article

  • Proper network configuration for a KVM guest to be on the same networks at the host

    - by Steve Madsen
    I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

    Read the article

  • RAID and Partitions, guidance Needed

    - by beauregarde
    Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

    Read the article

  • SQL Server on Linux

    - by TimothyAWiseman
    For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

    Read the article

  • Bridged network on OS X only gets UDP broadcast traffic

    - by a paid nerd
    I've created a bridged network Mac OS X 10.8.5 using ifconfig and TUNTAP for OS X to bridge my wireless connection, en0, with a virtual interface, tap0, which I can use for guest VMs: $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 28:cf:xx:xx:xx:xx inet6 xxxx::xxxx:xxxx:xxxx:xxxx%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.64 netmask 0xffffff00 broadcast 192.168.100.1 media: autoselect status: active bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) However, if I tcpdump -i tap0, I only see broadcast traffic. Shouldn't I see a mirror of everything on en0? (192.168.100.33, the host doing the broadcasting, is another unrelate, noisy server on my LAN.) (I asked a similar question here and will probably close it.)

    Read the article

  • CentOS 6.2 Bridge Setup for KVM

    - by Gaia
    I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • An efficient setup of several VPSs on one box?

    - by Abs
    Hello all, I hope its ok to ask this question on serverfault, its not an actual fault but more of an implementation advice request. I would like to have a dedicated server that I can deploy my own VPSs on. These VPS will be various windows, Mac and Linux operating systems. I was thinking of buying a large Linux based dedicated server and then running VMWare Server or Virtualbox and adding my own images on there for each OS but I am thinking this isn't going to be cost effective and easy to maintain. I am hoping someone can help me with the perfect setup that is both cost effective and efficient so that I can have 6 VPS at my disposal that I can easily control. Thanks all for any help.

    Read the article

  • How to install virtio balloon driver in Windows Server 2008 Std x64

    - by javano
    I am trying to run the install command in the INF file that comes on the virtio drivers ISO, after having downloaded devcon.exe from Microsoft's website. I am getting the following error and I don't know how to progress; C:\Users\Administrator\Desktop\ADM64>devcon install BALLOON.inf PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00 devcon.exe failed. 'DEV_1002' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_00051AF4' is not recognized as an internal or external command, operable program or batch file. 'REV_00' is not recognized as an internal or external command, operable program or batch file. Thank you.

    Read the article

  • FreeBSD Can't recognize my network

    - by Mascarpone
    I'm trying to install FreeBSD on VirtualBox in my Ubuntu 11.10 . When I try to download the packages via FTP, the systems fails to correctly configure the DHCP. There are two possible behaviors, randomly picked every time I retry: The DHCP is almost correctly configured, except my host is .fastwebnet.it rather than the real namehost.fastwebnet.it . Whenever I try to add something before the . , the system edit the field and revert it to .fastwebnet.it Only the netmask is configured, everything else is blank. I can't edit the fields. I tried both with NAT and Bridged adapter in my VirtualBox settings.

    Read the article

  • Any online network topology to study?

    - by Gok Demir
    I want to study network. But I don't have an access to a sample network (routers, DNS, IP4, IP6 windows linux mixed heterogenous system). Do you know any online network to study (Free as possible). Is it possible to simulate network topologies with a sing PC using virtual machine. If so could you guide me?

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >