Search Results

Search found 16758 results on 671 pages for 'great programmer'.

Page 520/671 | < Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >

• Network Load Balancing and AnyCast Routing

  - by user126917

  Hi All can anyone advise on problems with the following? I am planning on installing the following setup on my estate: I have 2 sites that both have a large amount of users. Goals are to keep things simple for the users and to have automatic failover above the database level. Our Database will exist at the primary site and be async mirrored to the secondary site with manual failover procedures.The database generate sequential ID's so distributing it is not an option. I plan to site IIS boxes at both sites with all of the business logic on them and heavy operations. The connections to SQL will be lightweight and DB reads will be cached on IIS. On this layer I plan to use Windows network load balancing and have the same IP or IPs across all IIS boxes at both sites. This way there will be automatic failover and no single point of failure. Also users can have one web address regardless of which site they are in automatically be network load balanced to their local IIS. This is great but obviously our two sites are on different subnets and as this will be one IP address with most of our traffic we can't go broadcasting everything across the link between the sites. To solve this problem we plan to use AnyCast routing over our network layer to route the traffic to the most local box that is listening which will be defined by the network load balancing. Has anyone used this setup before? Can anyone think of any issues with this? Also some specifics I can't find anywhere at the moment. If my Windows box is assigned an IP and listening on that IP but network load balancing is not accepting specific traffic then will AnyCast route away from that? Also can I AnyCast on a socket level?

  Read the article

• Remote paging with Nagios when network is down and email won't work -- cellular modems and alternatives

  - by Quinten

  What is the best option for remote paging when network services are down? I'm looking for a solution that can let me know when network services are down during off-hours only, and especially when email/smtp services are out. Therefore, it needs to be redundant to our network and power supply. I'm imagining a cellular modem is one option. What's the price range for these? Is anybody using them and feel that they are worth the cost? I'm imagining that it's something we would end up sending an emergency page ~ 1x/month at most, so I'd like the pricing to reflect that--I don't mind a high per-page cost as long as it has a low recurring cost. Another option would be to expose at least one server to remote ping, and run a check script on a remote server. Are there paid options for this? Currently, we run Nagios on a Linux VM on a Windows 2008 Hyper-V host. It would be great if the solution would work in that environment, but I know it's tricky with external devices, and we could move Nagios to a standalone workstation if needed.

  Read the article

• replacing buffalo lonkstations with FreeNAS, overall backup strategy, am I on the right path?

  - by Shreko

  We've been using 2 Buffalo LinkStations of 320Gb each for shared directory and employee's server storage (around 20 employees). So only documents (word, excel, cad drawings etc.) and database backup of the main application server (ERP, Accounting) 1 buffalo box serves as a main one, located at the server room, next to the main application server and the other buffalo box is located on the opposite side of the building (for fire protection) in a secure storage room and backs up the first one. We also have several external HDs that backs up everything from the buffalo box for an offsite backup. After 3.5 years of using these, capacity is a main limitation, I'm planning a replacement and would like to use FreeNAS (we already use monowall with great success). I would like to keep it simple and continue similar setup, building two low power boxes with 1 hd (2Tb) each. Is low power atom mobo OK? Not sure about HDs? I've read on this site somebody mentioning more seagate ES2 as more reliable and better performing. How would those eco/green drives compare. We've been pretty happy with speed of Buffalo boxes and I don't want my users to notice any slowdown. Any suggestion?

  Read the article

• Why does my DD-WRT not accept SSH connections from my laptop?

  - by Vlad Seghete

  So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

  Read the article

• Looking for Remote Control that works with everything (even Windows 7 Media Center)

  - by T Reddy

  Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

  Read the article

• OpenVZ: Choosing right MySQL-Server depending on host

  - by Scheintod

  What I have: Two servers running Wheezy/OpenVZ with One MySQL container on each host master/master replicated (mysql1/mysql2) Replicated DNS on each host (dns1/dns2) different web-containers on each host but regulary backuped to the other. What I want: Each container should use the "local" MySQL-Server (the one which runs on the same hardware-node). I'd like to be able to move the web-containers between the to hosts. Each container should choose the MySQL-Server (semi) automatically. This scheme should continue working if one host is down. What I tried: Currently I'm keeping track on which container should run on which host by DNS entries which are queries by scripts e.g. for questions like: "Which container should be backuped on/to which host." For choosing the right MySQL server I have one extra entry like "mysql.container_abc" which resolves to either mysql1/mysql2. So in the applications in the container I can use "mysql.container_abc" for e.g. mysql_connect and if I want to move the container around I just need to change the dns. Now I notices one problem with this approach: Every mysql_connect generates one DNS query because the dns is not cached and this slows the request down unnecessarily. What I would like better: Some way of passing the information on which host we are running to the container and using it directly instead of using DNS. E.g. some way of setting a custom /etc/hosts entry in the container. Or any other great idea. Doesn't have to include DNS but shouldn't require to much special "magic" inside the container.

  Read the article

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• How to play 24 fps video smoothly on a 60Hz display?

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

• Two Firefox windows vs two browsers? Ram Consumption

  - by Kayle

  I don't know enough about Ram & sharing to know what the difference is here. Normally, I run Chrome in one desktop for personal use, and Firefox on a second desktop for business. I like the separation of saved passwords and whatnot. However, I recently learned that I can open two different profiles in Firefox at the same time, so I was wondering if that would be cheaper to my system resources, or not? Out the door, I don't think it would save more than 40-60mb of ram... but I'm wondering, 3 hours later, if ram handling will be better using just one browser for all my heavy lifting. I only have 2gb of ram and I run iTunes and Photoshop as well, almost all day. So I like to save ram where I can. Any thoughts? UPDATE: I've been centering around chrome more recently and using firefox for testing. Dev isn't bad on Chrome and it's great at releasing memory when I close tabs. In retrospect, I think the best answer to this question is simply for me to buy another 2gb of ram.

  Read the article

• Intermittent 5.7.1 email bounce to Exchange 2007

  - by Steve Kennaird

  My knowledge of Exchange isn't particularly great, so excuse me if some of the terminology I use isn't quite right. I'm primarily a web developer who's now responsible for a small business's network. We have a server running SBS 2008 and Exchange 2007. Generally, everything works well, emails are able to be sent to both internal and external domains without issue. We've only got ~20 users, Exchange is sitting on a single server. I use SendGrid to send emails generated by our externally hosted website to users in the office. Primarily, order notifications are sent to [email protected]. Without any pattern and less than once per week on average, an email to [email protected] will bounce back, and the logs on SendGrid detail the following error: 550 5.7.1 Unable to relay for [email protected] Either side of that failed delivery attempt, I'm able to send and receive emails to/from [email protected]. Having done some research, incorrect reverse DNS seems like it could be a cause of intermittent bounces like this. Having used nslookup, I have found that the reverse DNS doesn't map like it should, e.g. Office IP: 135.325.351.123 (made up IP, for example only) Domain: office.somedomain.com (made up, for example only) Reverse DNS: somedomain.gotadsl.co.uk (half made up) Could this be a cause? I'm sure that the IP address and the domain should map to each other. Also, it has been suggested to me that as the Exchange server is on a network with an ADSL connection, that could be a potential cause as the connection "goes up and down all day long". I don't have an opinion on this, as I don't have enough knowledge of Exchange/ADSL to form a reliable opinion. Can anyone offer any insight as to whether one or both are actually potential causes, or if there is another possible cause?

  Read the article

• XCOPY access denied error on My Documents folder

  - by Ryan M.

  Here's the situation. We have a file server set up at \fileserver\ that has a folder for every user at \fileserver\users\first.last I'm running an xcopy command to backup the My Documents folder from their computer to their personal folder. The command I'm running is: xcopy "C:\Users\%username%\My Documents\*" "\\fileserver\users\%username%\My Documents" /D /E /O /Y /I I've been silently running this script at login without the users knowing, just so I can get it to work before telling them what it does. After I discovered it wasn't working, I manually ran the batch script that executes the xcopy command on one of their computers and get an access denied error. I then logged into a test account on my own computer and got the same error. I checked all the permissions for the share and security and they're set to how I want them. I can manually browse to that folder and create new files. I can drag and drop items into the \fileserver\users\first.last location and it works great. So I try something else to try and find the source of the access denied problem. I ran an xcopy command to copy the My Documents folder to a different location on the same machine and I still got the access denied error! So xcopy seems to be denied access when it tries to copy the My Documents folder. Any suggestions on how I can get this working? Anyone know the reason behind the access denied error?

  Read the article

• Setup a Reverse Proxy with Nginx and Apache on EC2

  - by heavymark

  Good Day, I am currently using the free Amazon EC2 micro instance to learn Linux and server setup. I wish to setup Nginx as a reverse web proxy. I found a great article on mediatemple on how to do it: http://wiki.mediatemple.net/w/Using_Nginx_as_a_Reverse_Web_Proxy The directions work for most any server except for EC2.One difference between EC2 and MediaTemple is how IPs work. Overall EC2 instances do not know their elastic IP. So when following the wiki directions in the virtual hosts for instance instead of myip:80 for instance I put *:80. When just using Apache this works perfectly. In the apache virtual hosts I did "127.0.0.1:80" and in the Nginx I put *:80. Apache restarts, by Nginx provides an error that it cannot bind because the ip is already in use. If I could add an actual IP in the Nginx file it would work but since EC2 requires me to put in the asterisk it ends up conflicting with the apache virtual hosts entry. Anyone know a simple way around this (other than not using EC2) ;-) Thank you! Cheers, Christopher

  Read the article

• Recommend a free temperature-monitoring utility for cores + video card, on Vista?

  - by smci

  Looking for your recommendations for a free temperature-monitoring utility, for my PC (Core 2) and graphics card for Vista. (Question reposted with the hyperlinks now I have 10 reputation). I don't want all the geeky details, I don't overclock, I don't see the need to mess with my fan speeds or motherboard settings, I just want something fairly basic to help with basic troubleshooting of intermittent overheats on video card and/or mobo: must run on Windows Vista (yes, don't laugh). ideally displays temperature when minimized to toolbar, and/or: automatically alerts me when temperature on either core or the video card exceeds a threshold ideally measures temperature of video card and system as well, not just the cores. HDD temperature is not necessary I think. logging is nice, graphs are also nice portability to Linux and Mac is nice Apparently Everest is the best paid option, but I'm not prepared to spend $40. I found the following free options, but no head-to-head at-a-glance comparison: CoreTemp (only does cores, not video card?) Open Hardware Monitor (nice graphs, displays when minimized to toolbar, no alerts) RealTemp (has alerts, works minimized, lightweight install) HWMonitor (no alerts, CNET: "[free version is] simple but effective") from CPUID CPUCool (not free: 21-day trialware, then $18) SpeedFan from Almico (too geeky, detail overload; CNET: "most users won't be able to make head or tail of the data this utility provides") Motherboard Monitor (CNET: not recommended, requires expert knowledge of your mobo, dangerous) Intel Thermal Analysis Tool (only does cores, not video card? has logging) Useful discussions I found: hardwarecanucks.com , superuser.com 1, 2 , forums.techarena.in (Update: I downloaded Real Temp 3.60 and it meets all my needs, the customizable alert temperature is great. Open Hardware Monitor seems to be the other one that mostly meets my needs, except no alerts; but it is portable. I tried SpeedFan but the interface is very cluttered, too much unnecessary detail (needs a Basic/Advanced mode and a revamp of the interface.) The answer to my underlying issue is nVidia Geforce LE 7500 video card which runs very hot.)

  Read the article

• Getting prompted for password accessing page through script even when client and server are in same

  - by Munawar

  I'm trying to pull up an internal webpage in automated fashion using the methods in 'Internetexplorer.Application' using vbscript. But I'm getting prompted for password, although the client and the server both are in the same domain. Predictably when I manually try to access the web page, I don't have any problem. Only when I try using cscript.exe or iexplore.exe, I get prompted. I'm trying to automate some of the smoke test we do after a new build is deployed. But this password prompt is getting in the way. Following are the system specs Client machine - IE 7.0, OS is Windows server 2003 Server machine - Windows Server 2008 Both are in the same domain. So far I've unsuccessfully tried following to automate the password input system.diagnostics.process.start var WinHttpReq = new ActiveXObject("WinHttp.WinHttpRequest.5.1"); WinHttpReq.Open("GET", "http://website", false); WinHttpReq.SetCredentials("username", "password", 0); Nothing seems to work I checked in IIS. we have only anonymous and forms authentication enabled Is there any configuration setting in the client machine that can be tweaked to bypass this, although I'd hate to do it since you step on the toes of twenty people trying to do that. Preferable way would be to programmatically input it if its possible. Also, if you can suggest a more appropriate forum, that'd be great too. Please help.

  Read the article

• How to correctly set GNU Screen to display currently running program in hardstatus

  - by johnny_bgoode

  I posted this question on SuperUser but it's hardly getting any views, so I thought I'd ask here as well. In bash, to display the name of the current program in the GNU Screen hardstatus line takes only two configuration lines. First, tell screen what the end of your prompt normally looks like, and supply a default title for a window when you are sitting at in the shell: shelltitle "$ |bash" Next, place this escape sequence in the PS1 variable, before the characters that normally terminate the prompt '$ ' in this case: \033k\033\\\ This technique works, to a point. The hardstatus window title is updated to the name of the currently running program, and then switches back to the default title shortly after execution is finished. One major problem, however, is that this escape string is not escaped itself, causing line-wrapping problems with commands longer than the initial line. This was annoying, so I set out looking for a solution. Turns out, simply escaping the previous escape sequence corrects line wrapping: [\033k]\[\033\\\] Great! My hardstatus window title still updates to the name of the currently running program, and now my longer commands wrap to the second line correctly. However, with this new escape sequence in my PS1, screen updates the window title to the actual command I am typing, not simply the name of the current program once it is executed. I am wondering, has anyone gotten this working correctly - i.e. line wrapping and proper updating of the hardstatus window title? Thanks!

  Read the article

• How to correctly set GNU Screen to display currently running program in hardstatus

  - by johnny_bgoode

  In bash, to display the name of the current program in the GNU Screen hardstatus line takes only two configuration lines. First, tell screen what the end of your prompt normally looks like, and supply a default title for a window when you are sitting at in the shell: shelltitle "$ |bash" Next, place this escape sequence in the PS1 variable, before the characters that normally terminate the prompt '$ ' in this case: \033k\033\\ This technique works, to a point. The hardstatus window title is updated to the name of the currently running program, and then switches back to the default title shortly after execution is finished. One major problem, however, is that this escape string is not escaped itself, causing line-wrapping problems with commands longer than the initial line. This was annoying, so I set out looking for a solution. Turns out, simply escaping the previous escape sequence corrects line wrapping: \[\033k\]\[\033\\\] Great! My hardstatus window title still updates to the name of the currently running program, and now my longer commands wrap to the second line correctly. However, with this new escape sequence in my PS1, screen updates the window title to the actual command I am typing, not simply the name of the current program once it is executed. I am wondering, has anyone gotten this working correctly - i.e. line wrapping and proper updating of the hardstatus window title?

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• Combining Two .htaccess files .. Wordpress and OSCommerce SEO URL's

  - by William Langford

  I Googled over and over and got no where so I figured I would give this a try.. I have OSCommerce in my httpdocs directory. Then I have /wordpress but changed the blog location to /blog.php with some mods. Works great. Now to add SEO URL's from Wordpress to my OSC htaccess OSC htaccess; Options +FollowSymLinks RewriteEngine On RewriteBase / RewriteRule ^(.)-p-(.).html$ product_info.php?products_id=$2&%{QUERY_STRING} RewriteRule ^(.)-c-(.).html$ index.php?cPath=$2&%{QUERY_STRING} RewriteRule ^(.*)-m-([0-9]+).html$ index.php?manufacturers_id=$2&%{QUERY_STRING} RewriteRule ^(.*)-pi-([0-9]+).html$ popup_image.php?pID=$2&%{QUERY_STRING} RewriteRule ^(.*)-t-([0-9]+).html$ articles.php?tPath=$2&%{QUERY_STRING} RewriteRule ^(.*)-a-([0-9]+).html$ article_info.php?articles_id=$2&%{QUERY_STRING} RewriteRule ^(.*)-pr-([0-9]+).html$ product_reviews.php?products_id=$2&%{QUERY_STRING} RewriteRule ^(.*)-pri-([0-9]+).html$ product_reviews_info.php?products_id=$2&%{QUERY_STRING} RewriteRule ^(.*)-i-([0-9]+).html$ information.php?info_id=$2&%{QUERY_STRING} Wordpress htaccess RewriteBase /blog.php/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog.php/index.php [L] Is this even possible with two RewriteBase files? I looked at a way to do it with directory defines but didn't think it was possible as blog.php isn't a directory. Thanks!

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• Need help finding a program to split PDFs based on text in specific areas

  - by Sean

  I reeeeally need help with this. I work for a University in the admissions office and we get large PDFs of every document that an applicant uploads to us. What I need to do is split these PDFs into separate documents. Each of the separate documents has a head at the top of what type of document it is (Statement of Purpose, Transcript, etc). I found a program a few weeks ago that at first seemed to work great (A-PDF Splitter). It would look for every type of document in a combined PDF (eg. Statement of Purpose), and if it saw that heading it would create a new PDF named "ORIGINALFILENAME-Statement of Purpose". I soon discovered though that the program breaks for no reason on certain PDFs, and I have to take the time to take that PDF out of the queue and start the splitting over again (and we get 250 a day). I contacted their support and they basically told me I was SOL. So please, if you can find me a program to split PDFs into smaller PDFs based on if it finds particular text in a region, then I would be forever in dept to you. If I don't find one soon then I'm going to be spending the entire day splitting PDFs by hand and my boss isn't going to be happy.

  Read the article

• Auto-rotate rotated images with mogrify

  - by Frank Presencia Fandos

  Some of my images have been taken rotated but kept this data. The problem is that, when using mogrify to convert them from JPG to png, that data seems to dissapear. For showing this problem, I think the best is to show the script and an screenshot. Script with the code. Put it in a text file, give it execution permission, double click, run (from terminal if you wish) and wait a while. All the JPGs in that folder will be converted to png. #! /bin/bash echo "Converting JPG to png. Please don't close this window." mogrify -alpha on -format png *.JPG mogrify -alpha on -format -alpha on png *.jpg It works great and adds an alpha channel. This is personally useful when I edit them later, not to add the channel individually. Now the screenshot that illustrates the problem: As you can see, the original ones' (JPGs) preview is right, the modified preview is wrong, the Shotwell rendering is right and the GIMP edit is wrong and didn't even say the image was rotated, as it uses to do with other images. How can I edit my script to preserve the orientation?

  Read the article

• Problem with Outlook 2010 (SMTP AUTH LOGIN)

  - by Filipe YaBa Polido

  **IGNORE THIS QUESTION - SOLVED WITH A PYTHON SCRIPT available at: http://yabahaus.blogspot.com I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

  Read the article

• Struggling with proper way to setup Permissions on Linux/Apache Web Server

  - by Dr. DOT

  Your expert experience and assistance is great, greatly appreciated here. I have been running a LAMP server for a long time, yet I still struggle with the best way to set file & directory permissions for FTP and WWW protocol activity. My Control panel is WHM/cPanel (not that it makes a difference), and out-of-the box: files are owned by the user account setup in WHM (eg, "abc") files have a group setting of "abc" as well file permissions are created with 644 directories are owned by "abc" directories have a group setting of "abc" directories permissions are created with 0755 Again, these are the default permission settings. Now everything is fine with FTP activity, but please advise me if any of these file/directory settings create issues, especially with security. Here's where my struggle comes into play. I have PHP apps that allow a visitor to create, edit, rename, delete, etc. sub-directories and files in certain selected directories. PHP runs as "nobody" on my server. So in order to get my PHP/Web apps to work, I have had to: chown nobody * chgrp nobody * chmod 0777 * to everything in these certain & selected sub-directories. I know this is probably a huge security whole (so don't ask me for any links :) but how should I set all the permissions to allow my FTP user to do his thing while allowing the PHP apps to do their thing will also "minimizing" any security risks and exposures? I know that big CMS systems like Drupal, Joomla, WordPress and so on, handle this. Thanks ahead of time for reading through this and offering your expert advice!

  Read the article

• How to record tv to network share with Windows Media Center?

  - by Peterdk

  Well, you would think that Windows 7's new MediaCenter would be up to the task of recording your TV to a network share/drive. Too bad, it looks like it's just not possible. I have a windows 2008 R2 server, and a Windows 7 machine with a TV card. Since my server has 2TB of storage, it would be nice to record directly to it's networked drive. (I mounted it as Z:). I tried the following: Selecting it in Media Center Itself: Not working. Not available. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording , setting RecordPath to Z:\TV. Not working. Editing the registry: setting RecordPath to \\server\TV. Not working. Creating a Symlink (mklink \D) to Z:\TV and \\server\TV and setting that in the registry as RecordPath. Currently I am out of options. I could ofcourse Install Windows7 on my server, but I have no license for that, and my windows 2008 r2 is free from dreamspark. Are there people that are succesfully recording to a networked drive/storage? edit I also need to mention that I need to be able to acces the stored files from other PC's, like my laptop. So iSCSI is great for recording, but it looks like you can't access iSCSI devices from multiple PC's. Looks like sharing a iSCSI device is out of the question, so: Are there workarounds to get this thing recording to my network drive?

  Read the article

< Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >