Search Results

Search found 14975 results on 599 pages for 'os'.

Page 521/599 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

• How to setup RAID 1 with Intel RST on an existing Windows 7 system?

  - by instcode

  I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

  Read the article

• download and process a file by ftp at set intervals, with error handling, rescheduling and status messages

  - by compound eye

  I want to download a data file from a remote ftp server to my machine at regular intervals. Once the file is downloaded I want to call another script which will process the file. My development machine is mac os x, the eventual deployment environment is linux. What's would be the stock standard way to automate this? I know I can use cron to schedule curl to download and to run a script that will process the downloaded file at regular intervals, and I know could write a slightly more complex script or an application that would do this and add error handling, rescheduling and sending status emails. But one of my requirements for this project is to write as little custom code as possible, instead I should try to use standard, tried and true existing tools, and if I do have to write code, to try and write the most straightforward code possible. The reason for this is the code will potentially be installed on a large number of machines, all of which will need to be tweaked, customised and maintained by different people, long after I am gone from the project, so the intention is to use well documented, well supported tools as much as possible. This seems such a common task, there must be tools and scripts all over the internet, written by people who have carefully considered everything that could possibly go wrong when you need to download and process a file from a remote server at regular intervals, with error handling, rescheduling and sending status messages. Is that what Expect is for? What would you recommend? (the system will be downloading weather prediction data every six hours, so that the system can prepare in the event of bad weather warnings)

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

  - by Nick

  Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

  Read the article

• How do you set up CRON?

  - by user1723760

  I have never used CRON before but I want to use CRON in order to be able to perform schedule jobs for a php script. The php script is called "inactivesession.php" and in the php script is this code: <?php include('connect.php'); $createDate = mktime(0,0,0,10,25,date("Y")); $selectedDate = date('d-m-Y', ($createDate)); $sql = "UPDATE Session SET Active = ? WHERE DATE_FORMAT(SessionDate,'%Y-%m-%d' ) <= ?"; $update = $mysqli->prepare($sql); $update->bind_param("is", 0, $selectedDate); $update->execute(); ?> Wht I want to do is that when the above date is reached (25th Oct), I want the php script to perform the UPDATE statement above. But my question is that how do I use CRON in order to do this? The server I am using is the university's server known as helios, does CRON need to be set up in helios, (do I have to call the admin for this) or is it something else which uses CRON. I have never used CRON before so can you explain to me how CRON can be set up for the example above with the server I am using? Thanks UPDATE: Hi, I think the name of the OS is actually helios but I am not sure, I have a wikipedia page on this: here. I will read the crontab wikipedia page and see what I can find, but what my question is that is CRON already set up, do I just go right ahead and use CRON or do I need to set it up first?

  Read the article

• Can I clone my hard drive to an external and boot from the clone?

  - by willbuntu

  First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

  Read the article

• WAMP running extremely slow on WIndows 7

  - by JavaCake

  After 2 days of tough fight trying to figure out what the problem is with my Windows 7 32-bit machine at work i have nearly given up. The issue is that the pages are loaded extremely slow, the performance is both when accessed locally (127.0.0.1) or from another computer in the intranet. First to explain the system: WAMP version: Apache 2.2.22 – Mysql 5.5.24 – PHP 5.4.3 XDebug 2.1.2 XDC 1.5 PhpMyadmin 3.4.10.1 SQLBuddy 1.3.3 webGrind 1.0 DocumentRoot: Located on network drive MySQL: InnoDB Pages: PHP, MySQL, AJAX etc. So basically the changes i have made in order to get a greater performance: Changed C:\windows\system32\drivers\etc\hosts: 127.0.0.1 localhost 127.0.0.1 127.0.0.1 Modified my.ini: innodb_flush_log_at_trx_commit = 2 Modified httpd.ini: EnableMMAP on EnableSendfile on Modified php.ini: realpath_cache_size= 4m How i measure the performance is the overall loadtime of the page. I run it locally on my Mac OS X machine aswell (MAMP), and typically the frontpage loadtime is 0.06seconds but on the Windows 7 machine it is 6-10seconds. I have verified the loadtime with developertools in Chrome aswell. Furthermore the result is identical in XAMPP.

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• How to distribute multiple executions of an app across many machines

  - by Salec

  I've got a simulation app (64-bit windows) that runs without any user interaction. This app gathers information and pushes it to a remote MS SQL Server. What I'd like to do is execute this simulation as many times as I can on multiple machines after our nightly build has finished and it has passed the test suite. If possible I'd love to have the ability to configure it to stop after x total runs or if the entire batch has taken over y hours. I've tried using Visual Studio's built in test framework since we already have a test lab set up with multiple agents. I created a single unit test that simply runs the simulation then I created an ordered test and added that single test multiple times (from what I gather, this is the only way to execute the same unit test more than once). I found that ordered tests are only run on a single agent and not distributed which is very limiting. We use TeamCity to perform our nightly builds and I suspect it's possible to implement this on top of that, but I'm fairly new to TeamCity. We also have Jenkins and Bamboo available and I'm open to any other software that would get the job done presuming it runs on a 64-bit Windows OS. Any suggestions?

  Read the article

• Specify default group and permissions for new files in a certain directory

  - by mislav

  I have a certain directory in which there is a project shared by multiple users. These users use SSH to gain access to this directory and modify/create files. This project should only be writeable to a certain group of users: lets call it "mygroup". During an SSH session, all files/directories created by the current user should by default be owned by group "mygroup" and have group-writeable permissions. I can solve the permissions problem with umask: $ cd project $ umask 002 $ touch test.txt File "test.txt" is now group-writeable, but still belongs to my default group ("mislav", same as my username) and not to "mygroup". I can chgrp recursively to set the desired group, but I wanted to know is there a way to set some group implicitly like umask changes default permissions during a session. This specific directory is a shared git repo with a working copy and I want git checkout and git reset operations to set the correct mask and group for new files created in the working copy. The OS is Ubuntu Linux. Update: a colleague suggests I should look into getfacl/setfacl of POSIX ACL but the solution below combined with umask 002 in the current session is good enough for me and is much more simple.

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• Stepmania + KDE4 = sound problem

  - by picca

  I cannot manage to get KDE4 + stepmania working. If I run StepMania I always get: StepMania 3.9 Log starting 2010-12-24 14:52:48 Loading window: gtk OS: Linux ver 020636 Crash backtrace component: x86 custom backtrace Crash lookup component: dladdr Crash demangle component: cxa_demangle Runtime library: glibc 2.11.2 Threads library: NPTL 2.11.2 TLS is available ALSA: Advanced Linux Sound Architecture Driver Version 1.0.23. ALSA Driver: 0: HDA ATI SB [SB], device 0: STAC92xx Analog [STAC92xx Analog], 0/1 subdevices avail ALSA Driver: 0: HDA ATI SB [SB], device 1: STAC92xx Digital [STAC92xx Digital], 1/1 subdevices avail Couldn't load driver ALSA: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver ALSA-sw: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver OSS: RageSound_OSS: Couldn't open /dev/dsp: Device or resource busy Language: english Theme: default Error: Couldn't find a sound driver that works I found that in StepMania/Data/StepMania.ini I should add following line: SoundDevice=default That enables me to run StepMania, but I don't have any sound. Which is pretty bad for an application like this one. I'm quite sure that the problem is in phonon that is blocking the audio device to which StepMania needs to access directly. I think that I can fix this if I run other (lighter) window-manager than KDE4. But that is not a solution occasional linux user. Do I have any chance to get StepMania under KDE4 completely working?

  Read the article

• Can't find partition tab in disk utility osX ver. 10.6.8

  - by John W

  I just got a used Mac Book Pro. I created a new admin account and deleted the old one as well as one other user. This is an older late 2007 MBP... the osX upgrade to 10.6.8 was just performed. My Macintosh HD is showing up as Partition 2. I ran disk utility (not from install disk), but there was no partition tab. I have a 160GB drive with only 53GB of space left on it. Since I am the only user and have no files on the laptop yet, I don't understand why there is so little space left. Surely the OS can't use up over 100GB. I wanted to run disk utility to see if there were any recovery partitions or other partition left over from the previous owner that could be erased to make room for expanding the main partition. Unfortunately, there is no partition tab in disk utility. The documentation I have found on line states that this version of osX includes that utility. The osX disks I have are for an older version so I wasn't sure if they would be of any use in solving this problem. Also, I was afraid if using the disks, would I lose the little bit of data/apps that I have assembled. I would rather not do a fresh install and have to do all the updates again to achieve this. The previous owner had some apps that I don't want to lose as I would have to pay handsomely to get them back. Simply, if all the previous users data is backed up on here after deleting user is still taking up space on a recovery partition (that I can't see)... I need to locate it erase it and expand the primary partition to re-aquire disk space for my files. I am new to Mac, so please be as descriptive as possible. Thanks.

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• P2V Wouldn't Boot, Rebuilt initrd, Need to Clean Up

  - by Mike Soule

  We have a CentOS 5.4 server (build 2.6.18-164.el5xen). We went to P2V this server so we can have redundancy, the physical only has one PSU. The P2V only completed 99% of the way, we have a VMWare ticket opened, but they marked the ticket as low priority. I was able to boot into a rescue disc of Red Hat 5.4 and rebuild the initrd with the help of this blog post. Now the only issue is the original server had a modified initrd, which was also from a different OS build and made by an outside provider. We do not have a document outlining modifications. My question is, is it at all possible to copy the initrd off of the physical server and replace it on the virtual and some how have the virtual machine boot? Thanks for any input. Edit: I copied the initrd img from the physical and it recreated the original issue. Here is a screen capture of the error. http://i.imgur.com/MqC73.jpg Edit2: echo Scanning logical volumes lvm vgscan --ignorelockingfailure echo Activating logical volumes lvm vgchange -ay --ignorelockingfailure VolGroup00 resume /dev/VolGroup00/LogVol01 echo Creating root device. mkrootdev -t ext3 -o defaults,ro /dev/VolGroup00/LogVol00 echo Mounting root filesystem. mount /sysroot

  Read the article

• Dead Linux server - need help and options

  - by Choi S.

  All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

  Read the article

• How can I make the Firefox Password Manager more intelligent?

  - by Philip

  I have two major gripes about the FF password manager: If I restore a session with multiple tabs with sites with saved passwords, the master password prompt pops up once for each of them, even if I correctly enter the password the first time. Sometimes I want Firefox not to use my saved passwords at all (e.g. because I want to let someone else use it without getting access to my accounts), but hitting cancel results in erratic behavior--sometimes the box just pops up again and again, or sometimes it stops and behaves as I wish (continuing to browse w/o my passwords) until it encounters another site that wants my password. Thus even when hitting cancel does leave me free to browse passwordless, it doesn't get Firefox to leave me alone for the whole session. Thus: do you know of any tweak or add-on that could (1) make Firefox smart enough to get my master password once and then leave me alone, and/or (2) add an option (checkbox-style, toggle button, etc.) to browse "for now" (until I toggle the option) or even "for this session" (until I restart) without using any of my saved passwords? I'm running Firefox 3.5.6 on Mac OS X 10.5; thanks.

  Read the article

• Possible to have different SSLCACertificateFiles under different Location in Apache (client side ssl certs)

  - by Mikko Ohtamaa

  I am setting up Apache to do smartcard authentication. The smartcard login is based on client-side SSL certificates handled by an OS driver. I have currently just one smartcard provider, but in the future there are potentially several of them. I am not sure how Apache 2.2. handles client-side certifications per Location. I did some quick testing and it somehow seemed that only the last SSLCACertificateFile directive would have been effective and this doesn't sound right. Is it possible to have different SSLCACertificateFile per Location in Apache (2.2, 2.4) as described below or is SSL protocol somehow limiting that you cannot have more than one SSLCACertificateFile per IP? Example potential config below how I wish to handle several SSLCACertificateFile on the same server to allow users to log in with different smartcard provides. <VirtualHost 127.0.0.1:443> # Real men use mod_proxy DocumentRoot "/nowhere" ServerName local-apache ServerAdmin [email protected] SSLEngine on SSLOptions +StdEnvVars +ExportCertData # Server-side HTTPS configuration SSLCertificateFile /etc/apache2/certificate-test/server.crt SSLCertificateKeyFile /etc/apache2/certificate-test/server.key # Normal SSL site traffic does not require verify client SSLVerifyClient none SSLVerifyDepth 999 # Provider 1 <Location /@@smartcard-login> SSLVerifyClient require SSLCACertificateFile /etc/apache2/certificate-test/ca.crt # Apache does not natively pass forward headers # created by SSLOptions +StdEnvVars, # so we pass them forward to Python using RequestHeader # from mod_headers RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e </Location> # Provider 2 <Location /@@smartcard-login-provider-2> # For real SSLVerifyClient require SSLCACertificateFile /etc/apache2/certificate-test/provider2.crt # Apache does not natively pass forward headers # created by SSLOptions +StdEnvVars, # so we pass them forward to Python using RequestHeader # from mod_headers RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e </Location> # Connect to Plone ZEO client1 running on fg ProxyPass / http://localhost:8080/VirtualHostBase/https/local-apache:443/folder_sits/sitsngta/VirtualHostRoot/ ProxyPassReverse / http://localhost:8080/VirtualHostBase/https/local-apache:443/folder_sits/sitsngta/VirtualHostRoot/ </VirtualHost>

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Nada

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• NGINX AEGIR DRUPAL permissions 403 forbidden

  - by nlam

  New to nginx Installed on mac os for use with aegir & drupal It's running great, but I have a problem with permissions My hostmaster installation is here : /var/aegir/hostmaster-6.x-1.7/ The hostmaster settings file here : /var/aegir/hostmaster-6.x-1.7/sites/aegir.ldev/settings.php Permissions for settings.php are set to 440 automatically by hostmaster, but I'm getting a 403 forbidden page because of this. If I give read permission to "other" the site works great (444 or even 004). Drupal is also telling me that the file system paths are not writable (sites/aegir.ldev/files & sites/aegir.ldev/private). I would have to change the permissions there too. Moreover, I would also have to change permissions for every site installed by hostmaster. Anyway. In my nginx.conf I have the following : user "myuser" _www; Owner and group for settings.php, /sites/example.ldev/files, /sites/example.ldev/private are "myuser" and "_www". Changing permissions to 004 solves this problem, but really confuses me. Why do "other" have permission and not owner or group? I've checked the processes running in activity monitor. Nginx is running as "myuser". Except for one process running as root. So I'm stumped. Hope someone can help.

  Read the article

• VMware guest pauses when the host is idle - how do I keep it running?

  - by EMP

  I'm running VMWare Worstation 7 with Windows 7 x64 as guest, Windows XP x64 as host. Inside the guest I run a long-running console application, which prints out progress messages with timestamps on them. Sometimes I leave it running for several hours while I lock the host OS and don't touch the computer at all. When I come back I find that some time after I left it seems to have paused and automatically resumed: the console app hasn't made much progress and there's a large time gap in its progress messages. There's nothing relevant in the host event log, but in the guest Application event log I can see these messages around the time I left: A request to disable the Desktop Window Manager was made by process (VMware Tools Service) The Desktop Window Manager was unable to start because composition was disabled by a running application And later, around the time I returned, this shows up in the System log: The system time has changed to ?2012?-?01?-?12T06:36:46.921000000Z from ?2012?-?01?-?12T03:18:19.953079000Z. That seems to support my theory that it's VMware doing something and not Windows itself. The question is: how do I stop it doing that? I want my application to continue running. By the way, the power options are set to never sleep in both guest and host.

  Read the article

• Does having TRIM enabled affect other hard drives on a computer (and how do you know when Windows is using it)?

  - by Breakthrough

  I recently purchased a solid state drive (an OCZ Vertex 2 (80 GB)) to use as my primary operating system partition. I also have three other SATA hard drives of assorted sizes. I successfully installed Windows 7 Professional onto the SSD (works awesome, great response time and transfer rate), and used the other three HDDs for data storage. I was browsing through the Bible of OCZ SSDs, and noticed the following in Section 60-76 - Tweaks and TRIM: Q. How do I know if TRIM is enabled on my OCZ SSD? A. In Windows 7, go to start/run/cmd), type the following: fsutil.exe behaviour query DisableDeleteNotify It should respond back with: DisableDeleteNotify=0 if TRIM support is ready and active. If it's not, then type: fsutil.exe behavior set DisableDeleteNotify 0 After a bit of searching on Google, I found similar results elsewhere (set DisableDeleteNotify to 0, which makes sense since for TRIM to work, the solid-state drive needs to be notified when deletes occur (for the garbage collector) unlike a normal hard drive). When I run the query on fsutil, I get the following result: DisableDeleteNotify = 48 Following the instructions I found, I set this to 0 instead of 48. However, I am beginning to wonder. Is this all the proof I really need that the OS is using TRIM? Also, since this applies globally for the computer, is TRIM data being sent to the other hard drives connected to the computer? And if so, would this cause any degradation in disk performance?

  Read the article

• System randomly freezes yet mouse still moves, SSD out of reallocatable sectors, should I replace it?

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• Windows 7 BSOD, safe mode working,

  - by mil0ck

  I need help getting my dualboot with Windows 7 and Ubuntu 12.04 to work, and since I'm not to experienced with computers I've been pretty dumb. Here's what I've done, quite shortend though: First removed a Ubuntu 10.04 partion, and replaced bootloader using EasyBCD Installed Ubuntu 12.04 on same partion as before Decided I need more space so I shrinked my C: partion (Windows partion) using Here, after rebooting my computer, I was stuck a grub rescue, when booting up the computer I fixed that by using SuperGrubDisk Rescatux and then using my Windows Vista install disk to repair the computer (computer is using Windows 7) I know re-installed Ubuntu 12.04 on the linux partion and got the GRUB-bootloader working Then, after using my computer for several hours, I installed beta drivers (version 304.79) for my GeForce GTS 240 and then rebooted my computer. At the first boot (after reboot) my computer just crashed, and here I am When trying to boot Windows 7 now I get a Blue Screen Of Death. I can though boot in to safe mode with everything working. I have uninstalled the beta drivers and installed the same one as before but still the same problem. I have tried all the commands in Bootrec.exe and none is working. I can't neither find an OS when using Bootrec.exe/ScanOs. I have also tried running: sfc/scannow and that comes out clean. Short: My harddrive and files seems to be intact but when booting I get bluescreen. I can though boot in to safemode with everything working. I need help Thanks to anyone who even took the time to read that. //mil0ck

  Read the article

• How to recover deleted files on ext3 fs

  - by Mike

  I have a drive which was using the ext3 filesystem. I am told that about 10Gb of data was deleted off the drive (probably via rm). The drive is currently mounted as read-only to preserve all data. Does anyone know of a method to restore some or all of the data? Also if it helps, the OS was Fedora. I've also been told that the data is mostly ASCII fortan source code and Matlab files. Conclusion I have finally managed to get the data back, and with the simplest means ever! After weeks of trying and failing to bring back much of any data, I brought someone in today to take a look at it and offer suggestions, he simply cd'd to the directory and everything was there! It was never lost in the first place!!! Needless to say I feel really dumb right now, but I learned quite a lot with this whole fiasco. At any rate, while I was looking through data forensics solutions, I found that the Autopsy, or more specifically the SleuthKit was the most helpful. So I will accept that as the final answer. I would also like to note for anyone that comes across this later on that the most up-voted (currently) answer by sekenre was also helpful and I learned a lot, but ultimately it did not help with the type (very many, and some being very large) of files I was dealing with. So thank to all you that provided suggestions and wish you all the best!

  Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >