Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 522/676 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

• Ubuntu 12.04 won't load - hangs at Busybox v1.18.5 / initramfs

  - by Marty

  I want to start by saying that I am very new with Linux (about 1 month using it). I have had no problems up until now. I am running Ubuntu 12.04 from a Toshiba laptop with 250 GB hard drive and 3 GB of ram. Everything worked fine yesterday. The only changes I made was was that I downloaded Banshee to try as a replacement for Rhythmbox and did a few recommended updates. This morning I tried to boot and it took a long time and I finally got this error: mount: mounting /dev/disk/by-uuid/02bc41cc-1e21-4700-a179-be2805a658c4 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.18. (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands (initramfs) I'm not sure what to do beyond this point. I have read around on here and haven't found the help I need. I did try to boot it from the Live CD. I can boot up to the Try Ubuntu/Install Ubuntu screen. When I go through the Try Ubuntu selection I can't access my hard disk. When I clicked on it I got this error: Unable to mount 247 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda/1, missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg|tail or so. I tried dmesg|tail and saw a string of values but nothing that looked helpful. I have also tried to boot from the GRUB screen as recovery mode and previous Linux version but they didn't work either. I tried to load Windows Recovery Environment (loader) (on /dev/sdc3) and got this message: error: no such device: 268057B1805785E9 error: hd1 cannot get C/H/S values I had saw somewhere that I could fix this with the Live CD but my knowledge isn't good enough to try. I tried something with Gpart that I had read, but the system told me that I didn't have Gpart. Could someone please explain to me what I need to do and/or haven't tried yet. Thanks so much!

  Read the article

• Producing a smooth mesh from density cloud and marching cubes

  - by Wardy

  Based on my results from this question I decided to build myself a 3D noise map containing float values in place of my existing boolean point values. The effect I'm trying to produce is something like this, rather than typical rolling hills; which should explain the "missing cubes" in the image below. If I render my density map in normal "minecraft mode" (1 block per point in the density map) varying the size of the cube based on the value in my density map (floats in the range 0 to 1) I get something like this: I'm now happy that I can produce a density map for the marching cubes algorithm (which will need a little tweaking) but for some reason when I run it through my implementation it's not producing what I expect. My problem is that I'm getting something like the first image in this answer to my previous question, when I want to achieve the effect in the second image. Upon further investigation I can't see how marching cubes does the "move vertex along the edge" type logic (i.e. the difference between the two images on my previous link). I see that it does do some interpolation, but I'm not convinced I have the correct understanding of what I think it should do, because the code in question appears to give the same result regardless of whether I use boolean or float values. I took the code from here which is a C# implementation of marching cubes, but instead of using the MarchingCubesPrimitive I modified it to accept an object of type IDrawable, containing lists for the various collections (vertices, normals, UVs, indices), the logic was otherwise untouched. My understanding is that given a very low isovalue the accuracy level of the surface being rendered should increase, so in short "less 45 degree slows more rolling hills" type mesh output. However this isn't what I'm seeing. Have I missed something or is the implementation flawed and need to be fixed? EDIT: A little more detail on what I am seeing when I "marching cube" the data. Ok so firstly, ignore the fact that the meshes created by the chunks don't "connect" (i'll probably raise another question about this later). Then look at the shaping of the island, it's too ... square, from the voxels rendered as boxes you get the impression there's a clean soft gradual hill and yet from the image there are sharp falling edges even in the most central areas where the gradient in the first image looks the most smooth. The data is "regenerated" each time I run this so no 2 islands come out the same, and it's purely random so not based on noise, but still, how can it look so smooth in 1 image and so not smooth in the other?

  Read the article

• Oracle at ASMC PDI 2012

  - by jeffrey.waterman

  Recently, I had the pleasure of representing Oracle at the American Society of Military Comptrollers National Professional Development Institute (PDI).  The PDI is the premier training event for resource managers in the Department of Defense and US Coast Guard.  Each year they assemble top presenters and key note speakers to convey their experiences and share the upcoming goals and vision for the Defense Department's financial and resource management community.  This year, the common themes were centered around 'auditability' and 'efficiency'.   What is auditability?  There were many definitions/themes tossed around, but to summarize my notes, it boiled down to:- the proper tracking of funds- audit readiness- proper controls- proper documentation There were sessions regarding entire programs focused on the need for auditability.  For example, FIAR: Financial Improvement and Audit Readiness (http://comptroller.defense.gov/fiar/index.html)   The FIAR stresses the "...improve(ment of) the Department's financial processes, controls and information." The entire conference, one set of solutions kept popping into my head around, "how can Oracle's solutions assist the Department of Defense", or any other Federal Agency, improve their financial processes and controls?   One answer came to mind:  Oracle Governance, Risk, and Compliance Management. Commonly referred to as "GRC". Let me summarize the main components around Oracle's GRC solution: GRC Manager: This solution is the central repository for documenting business processes, policies, and established controls.  All identified risks and issues are documented within the repository as well as action plans necessary for mitigation. GRC Controls:  This solution consists of a set of tools which are embedded with your ERP (financial, human resource, supply chain, etc.) applications to detect, prevent, and/or enforce the policies and procedures established by your Agency.  Components of the solution include:- Application Access Control Governor: a robust tool for managing application roles and responsibilities; simplify segregation of duty maintenance- Configuration Controls Governor: complete audit trail for changes made to configurations- Transactions Control Governor: track violations of internal controls; alert management to suspicious activities; be warned when high dollar transactions are occurring on an irregular basis; - Preventative Controls Governor: prevent sensitive information from being viewed by unauthorized parties; enforce field, block, and form change control If you are in the financial or resource management community and are concerned about auditability within your organization I suggest you follow up this post by reading about Oracle's GRC solutions.  www.oracle.com/grc Please feel free to follow up with thought and questions in the comments section below.  Also, if you have a topic you would like addressed in this blog, just drop me a note at [email protected]  or leave the suggestion in the comment section as well. Thank you for reading.

  Read the article

• Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

  - by arlendo

  Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

  Read the article

• JavaScript: Code Folding

  - by Petr

  Today I would like to mentioned code folding in the new JavaScript editor support, which is available in the continual builds from our server. It's a basic feature, but was mentioned in a comment under the mentioned post. So you can fold comments and every code block between { and }. The current support allows only methods to be folded. The difference is shown below. In the picture on the left side is the current folding and on the right side the new one.   The code folding can be switched off in the Editor Options (Tools main menu -> Options -> Editor category -> General Tab). In this dialog you can also define which folds should be collapsed by default when you open a file. These options more closely fit Java editor needs, but you can see in the next picture how the options are mapped for JavaScript code.  The Method option folds all functions in the code. Other code blogs are fold through the option Tags and Other Code Blogs.  The documentation comments (starts with /**) are fold through Javadoc Comments and when you check Initial Comment, then all comments that start with /* are folded by default.  The new JavaScript editor also supports custom folds. To add your custom fold, type in two special comments as shown in this example: // <editor-fold> Your code goes here... // </editor-fold> You can define the default description of a collapsed fold by adding a "desc" attribute: // <editor-fold desc="This is my super secret genius code."> Your code goes here... // </editor-fold> You can set a fold to be collapsed by default by adding a "defaultstate" attribute: // <editor-fold defaultstate="collapsed"> Your code goes here... // </editor-fold> There is a code template that helps with writing custom fold comments. The abbreviation for the template is fcom. As I wrote the new JS support is available in the continual builds. Go here for more info.

  Read the article

• Play Your Position Until the Play Breaks Down&hellip;then Do Whatever it Takes.

  - by AjarnMark

  If I didn’t know better, I would think that K. Brian Kelley (blog | twitter) has been listening in on conversations with my boss. In his recent blog post Successful Teams: Knowing When to Step Out of Your Role, Brian describes quite clearly a philosophy that my boss has been trying to get across to everyone in the department.  We have been using sports analogies, like how important it is to play your position, until the play breaks down (such as a fumble) and then do whatever it takes it to cover each other / recover the ball / win.  While we like having very skilled people who could do a lot of different tasks, it is important that you first do your assigned tasks, and only once those are complete, or failure of the larger mission is probable, do you consider walking away from them to help someone else with their responsibilities. The thing that you cannot afford, especially on a lean team, is the really nice guy who is always trying to help out other people, but in doing so, is never quite getting his own responsibilities taken care of.  Yes, if the Running Back drops the football, you want any member of the team in the vicinity to jump on it, whether that is the leading blocker or the Quarterback.  But until the fumble happens, you want the leading blocker to focus on doing his job, and block for the Running Back.  If the blocker is doing any other job than his primary responsibility, you’re probably going to lose. This sounds logical enough, but it is really easy to go astray with the best of intentions.  This is especially true on a small, tight-knit team, where it is really easy to get sucked into someone else’s task or problem, doubly so if you think you can do it better or faster than them.  Now you are really setting yourself up for failure.  The right thing is to let the other person do the job, even if it seems less efficient in the short-run, so that you can focus on the tasks which require your expertise.  Don’t break formation…don’t abandon your assignment, until it is clear that mission failure is imminent, and even then, as Brian writes, it should be with the agreement of the mission leader. Thanks, Brian, for putting it so well.  This has been distributed throughout our department.

  Read the article

• SQL SERVER – Get 2 of My Books FREE at Koenig Tech Day – Where Technologies Converge!

  - by pinaldave

  As a regular reader of my blog – you must be aware of that I love to write books and talk about various subjects of my book. The founders of Koenig Solutions are my very old friends, I know them for many years. They have been my biggest supporter of my books. Coming weekend they have a technology event at their Bangalore Location. Every attendee of the technology event will get a set of two books worth Rs. 450 – ‘SQL Server Interview Questions And Answers‘ and ‘SQL Wait Stats Joes 2 Pros‘. I am going to cover a couple of topics of the books and present  as well. I am very confident that every attendee will be having a great time. I will be covering following subjects: SQL Server Tricks and Tips for Blazing Fast Performance Slow Running Queries (SQL) are the most common problem that developers face while working with SQL Server. While it is easy to blame the SQL Server for unsatisfactory performance, however the issue often persists with the way queries have been written, and how SQL Server has been set up. The session will focus on the ways of identifying problems that slow down SQL Servers, and tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. After the session is over – I will point to what exact location in the book where you can continue for the further learning. I am pretty excited, this is more like book reading but in entire different format. The one day event will cover four technologies in four separate interactive sessions on: Microsoft SQL Server Security VMware/Virtualization ASP.NET MVC Date of the event: Dec 15, 2012 9 AM to 6PM. Location of the event:  Koenig Solutions Ltd. # 47, 4th Block, 100 feet Road, 3rd Floor, Opp to Shanthi Sagar, Koramangala, Bangalore- 560034 Mobile : 09008096122 Office : 080- 41127140 Organizers have informed me that there are very limited seats for this event and technical session based on my book will start at Sharp 9 AM. If you show up late there are chances that you will not get any seats. Registration for the event is a MUST. Please visit this link for further information. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• TechEd 2010 Day Three: The Database Designer (Isn't)

  - by BuckWoody

  Yesterday at TechEd 2010 here in New Orleans I worked the front-booth, answering general SQL Server questions for the masses. I was actually a little surprised to find most of the questions I got were from folks that wanted to know more about Stream Insight and Master Data Services. In past conferences I've been asked a lot of "free consulting" questions, about problems folks have had from older products. I don't mind that a bit - in fact, I'm always happy to help in any way I can. But this time people are really interested in the new features in the product, and I like that they are thinking ahead, not just having to solve problems in production. My presentation was on "Database Design in an Hour". We had the usual fun, and SideShow Bob made an appearance - I kid you not. The guy in the back of the room looked just like Sideshow Bob, so I quickly held a "bes thair" contest, and he won. Duing the presentation, I explain the tools you can use to design databases. I also explain that the "Database Designer" tool in SQL Server Management Studio (SSMS) isn't truly a desinger - it uses non-standard notation, doesn't have a meta-data dictionary, and worst of all, it works at the physical level. In other words, whatever you do in SSMS will automatically change the field/table/relationship structures in the database. We fixed this in SSMS 2008 and higher by adding an option to block that, but the tool is not a good design function nonetheless. To be fair, no one I know of at Microsoft recommends that it is - but I was shocked to hear so many developers in the room defending it as a good tool. I think the main issue for someone who doesn't have to work with Relational Systems a great deal is that it can be difficult to figure out Foreign Keys. The syntax makes them look "backwards", so it's just easier to grab a field and place it on the table you want to point to. There are options. You can download a couple of free tools (CA has a community edition of ER-WIN, Quest has one, and Embarcadero also has one) and if you design more than one or two databases a year, it may be worth buying a true design tool. For years I used Visio, but we changed it so that it doesn't forward-engineer (create the DDL) any more, so it isn't a true design tool either. So investigate those free and not-so-free tools. You'll find they help you in your job - but stay away from the Database Designer in SSMS. Or I'll send Sideshow Bob over there to straighten you out. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Getting Started with Kinect for Windows.

  - by Vishal

  Hello folks,      Recently I got involved in a project for building a demo application for one of our customers with Kinect for Windows. Yes, something similar what Tom Cruise did in the movie Minority Report. Waving arms, moving stuff around, swipes, speech recognition, manipulating computer screens without even touching it. Pretty cool!!! The idea in the movie showed us how technology would be after 50 years from that day.   Minority Report Movie clip.           Well, that 50 years of time frame got squeezed and recently on Feb 1st 2012, Microsoft released the official Kinect for Windows SDK. That’s just 10 years from the movie release. Although, the product is in it early stages but with developer creativity and continuously improving hardware, those features shown in the movie are not very far away from becoming a reality. Soon after releasing the SDK, Microsoft again announced in March the release of its new Kinect for Windows SDK version 1.5 which is coming out in sometime May. More history about Kinect. Anyways, so for a newbie with Kinect, where would you start. Here is what I would suggest you can do. Watch the Kinect for Windows Quick start Series by Den Fernandez. Download the Kinect for Windows SDK and start playing around with the demos in it. It also comes with some basic Kinect documentation. Coding4Fun Kinect Projects | Lot many more videos and open sources projects information. Kinect for Windows Session at Techdays NL demo by Jesus Rodriguez. Book: Beginning Kinect Programming with the Microsoft Kinect SDK.  | I did go through few of the chapters in this book and based on that, it does talk deeply about core Kinect concepts but in very easy to understand way. I would definitely suggest this book for any Kinect developers. I liked the way it explained the Gestures recognition in Chapter 6. Buy your Kinect device from either Amazon or NewEgg. You will get it cheaper then buying it from Microsoft Store. Personally, I love Newegg.com as I never had any order related or shipping issues with them. I always hate developing UI application but well, you would need to get your hands dirty with WPF too in order to work with Kinect. So get started with WPF concepts too. I will keep adding stuff to the list once I come across them but so far the above list would definitely get you started building your first Kinect apps. Till then Happy Kinecting…!!!!! Thanks, Vishal Mody

  Read the article

• CAPTCHA blocking for my scraping script?

  - by Surabhil Sergy

  I am working on a scraping project which involves getting web data and parsing them for further use. I have been working using PHP and CURL to make scraping scripts which crawls web data and I make use of either PHP Dom or Simple HTML DOM Parser library for these kinds of projects. On a recent project I encountered some challenges; initially I found the target website blocked my server IP such that the server could not make any successful requests to the site. Understanding these issues as common I bought a set of private proxies and tried to make request calls using them. Though this could get successful response, I noticed the script is getting some kind of blocks after 2-3 continuous requests. On printing and checking the response I could see a pop-up asking for CAPTCHA validation. I could not see any captcha characters to be entered and it also shows an error “input error: invalid referrer”. On examining the source I could see some Google recaptcha scripts within. I’m stuck at this point and I m not able to execute my script. My script is used for gathering data and it needs to go through a large number of pages periodically over the site. But in the current scenario I am not able to proceed with my script. I could see there are some options to overcome these captcha issues and scraping these kinds of sites too are common. I have been checking my script performance and responses over last two months. I could see during first month I was able to execute very large number of requests from a single IP and I was able to get results. Later I get an IP block and used private proxies which could get me some results. Later I am facing now with the captcha trouble. I would appreciate any help or suggestions in this regard. (Often in this kind of questions I used to get a first comment as, ‘Have you asked for prior permission from the target?’ .I haven’t ,but I know there are many sites doing so to get the details out of sites and target sites may not often give access to them. I respect the legality and scraping etiquettes but I would like to know at what point I stuck and how could I overcome that! ) I could provide any supporting information if needed.

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 13-19, 2013

  - by OTN ArchBeat

  The list below represents that Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of October 13-19, 2013, as determined by the clicks, likes, and other activities among the 4,425 fans of that page. Going Mobile with ADF – Implementing Data Caching and Syncing for Working Offline | Steven Davelaar Oracle Fusion Middleware A-Team solution architect Steven Davelaar takes you on a deep dive into how to use ADF Mobile to create an on-device application that supports working in offline mode. OOW 2013 Summary for Fusion Middleware Architects & Administrators | Simon Haslam Oracle ACE Director Simon Haslam shares a very thorough and detailed summary of the most interesting news coming out of Oracle OpenWorld 2013 for Fusion Middleware architects and administrators. Coherence Special Interest Group (SIG) – Sydney, October 24th If you're in the neighborhood... The Coherence Special Interest Group (SIG) in Sydney, Australia will be held on Thursday October 24th at the Park Hyatt Sydney, in The Rocks, between 9am and 5pm. The event will include presentations from customers, partners, and Coherence engineering team members and product managers. Click the link for more info. Free eBook: Oracle Multitenant for Dummies Oracle Multitenant for Dummies is a new e-book that provides a clear overview of the Oracle Database 12c multitenant architecture. It's free (registration required). Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 1: Introduction | Michael Rainey Michael Rainey launches a series of posts that guide you through "the architecture and setup for using GoldenGate with OBIA 11.1.1.7.1." Enriching XMLType data using relational data – XQuery and fn:collection in action | Lucas Jellema Another detailed technical post from the always prolific Oracle ACE Director Lucas Jellema. Webgate Reverse Proxy Farm | Vinay Kalra Vinay Kalra's blog post discusses architecture and recommendations for centralizing Webgate deployments onto a server farm. Free Poster: Adaptive Case Management in Practice Thanks to Masons of SOA member Danilo Schmiedel for providing a hi-res copy of the Adaptive Case Management poster, now available for download from the OTN ArchBeat Blog. Should your team use a framework? | Sten Vesterli "Some developers have an aversion to frameworks, feeling that it will be faster to just write everything themselves," observes Oracle ACE Director Sten Vesterli. He explains why that's a very bad idea in this short post. Integrating Custom BPM Worklist into WebCenter Portal | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis shares a sample application configured to run a custom BPM Worklist, and shares steps describing how to configure and access it from the WebCenter Portal. Thought for the Day "Morning comes whether you set the alarm or not." — Ursula K. Le Guin (Born October 21, 1929) Source: brainyquote.com

  Read the article

• Finding Z given X & Y coordinates on terrain?

  - by mrky

  I need to know what the most efficient way of finding Z given X & Y coordinates on terrain. My terrain is set up as a grid, each grid block consisting of two triangles, which may be flipped in any direction. I want to move game objects smoothly along the floor of the terrain without "stepping." I'm currently using the following method with unexpected results: double mapClass::getZ(double x, double y) { int vertexIndex = ((floor(y))*width*2)+((floor(x))*2); vec3ray ray = {glm::vec3(x, y, 2), glm::vec3(x, y, 0)}; vec3triangle tri1 = { glmFrom(vertices[vertexIndex].v1), glmFrom(vertices[vertexIndex].v2), glmFrom(vertices[vertexIndex].v3) }; vec3triangle tri2 = { glmFrom(vertices[vertexIndex+1].v1), glmFrom(vertices[vertexIndex+1].v2), glmFrom(vertices[vertexIndex+1].v3) }; glm::vec3 intersect; if (!intersectRayTriangle(tri1, ray, intersect)) { intersectRayTriangle(tri2, ray, intersect); } return intersect.z; } intersectRayTriangle() and glmFrom() are as follows: bool intersectRayTriangle(vec3triangle tri, vec3ray ray, glm::vec3 &worldIntersect) { glm::vec3 barycentricIntersect; if (glm::intersectLineTriangle(ray.origin, ray.direction, tri.p0, tri.p1, tri.p2, barycentricIntersect)) { // Convert barycentric to world coordinates double u, v, w; u = barycentricIntersect.x; v = barycentricIntersect.y; w = 1 - (u+v); worldIntersect.x = (u * tri.p0.x + v * tri.p1.x + w * tri.p2.x); worldIntersect.y = (u * tri.p0.y + v * tri.p1.y + w * tri.p2.y); worldIntersect.z = (u * tri.p0.z + v * tri.p1.z + w * tri.p2.z); return true; } else { return false; } } glm::vec3 glmFrom(s_point3f point) { return glm::vec3(point.x, point.y, point.z); } My convenience structures are defined as: struct s_point3f { GLfloat x, y, z; }; struct s_triangle3f { s_point3f v1, v2, v3; }; struct vec3ray { glm::vec3 origin, direction; }; struct vec3triangle { glm::vec3 p0, p1, p2; }; vertices is defined as: std::vector<s_triangle3f> vertices; Basically, I'm trying to get the intersect of a ray (which is positioned at the x, and y coordinates specified facing pointing downwards toward the terrain) and one of the two triangles on the grid. getZ() rarely returns anything but 0. Other times, the numbers it generates seem to be completely off. Am I taking the wrong approach? Can anyone see a problem with my code? Any help or critique is appreciated!

  Read the article

• Broken package after update: linux-headers, error brokencount >0

  - by escozul

  Ubuntu 12.04. After an update, I get a red warning icon in the system tray, warning about an error: broken count 0 Opening Update manager, I see that the broken package is linux-headers-3.2.0-33-generic-pae (new install) Specificaly I have my ubuntu on an AspireOne with 8gb internal storage. I tried apt-get clean as suggested in another question on this site, and tried reinstalling the package in Synaptic. I have tried to reboot but to no avail. I have also tried apt-get install --fix-broken and I get the following: sudo apt-get install --fix-broken [sudo] password for elina: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-headers-3.2.0-33-generic-pae The following NEW packages will be installed: linux-headers-3.2.0-33-generic-pae 0 upgraded, 1 newly installed, 0 to remove and 38 not upgraded. 1 not fully installed or removed. Need to get 0 B/977 kB of archives. After this operation 11,3 MB of additional disk space will be used. Do you want to continue [Y/n]; y (Reading database ... 437051 files and directories currently installed.) Unpacking linux-headers-3.2.0-33-generic-pae (from .../linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb) ... dpkg: error processing /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb (--unpack): unable to create `/usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h.dpkg-new' (while processing `./usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h'): No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried all suggestions I could find: sudo apt-get clean sudo apt-get autoclean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install sudo apt-get install --fix-broken Then I saw that on the error there was a mention about free space. So I did a df -h and the result was: Filesystem Size Used Avail Use% Mounted on /dev/sda1 7,0G 5,5G 1,1G 84% / udev 235M 4,0K 235M 1% /dev tmpfs 97M 816K 96M 1% /run none 5,0M 0 5,0M 0% /run/lock none 242M 352K 242M 1% /run/shm I see that on my root folder I have 1.1Gb free. The broken package is linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb which only takes up 11.3Mb on my hard drive. I'm soooo lost. I really hope there is something I'm missing here. I don't want to go about reformatting this bucket. It's really not worth the time. Any help for fixing this would be hot.

  Read the article

• Certification Notes: 70-583 Designing and Developing Windows Azure Applications

  - by BuckWoody

  It’s time for another certification, and we’ve just release the 70-583 exam on Windows Azure. I’ve blogged my “study plans” here before on other certifications, so I thought I would do the same for this one. I’ll also need to take exam 70-513 and 70-516; but I’ll post my notes on those separately. None of these are “brain dumps” or any questions from the actual tests - just the books, links and notes I have from my studies. I’ll update these references as I’m studying, so bookmark this site and watch my Twitter and Facebook posts for when I’ll update them, or just subscribe to the RSS feed. A “Green” color on the check-block means I’ve done that part so far, red means I haven’t. First, I need to refresh my memory on some basic coding, so along with the Azure-specific information I’m reading the following general programming books: Introducing Microsoft .NET (Pro-Developer): http://www.amazon.com/Introducing-Microsoft-Pro-Developer-David-Platt/dp/0735619182/ref=sr_1_1?s=books&ie=UTF8&qid=1296339237&sr=1-1 Head First C#, 2E: A Learner's Guide to Real-World Programming with Visual C# and .NET: http://www.amazon.com/Head-First-2E-Real-World-Programming/dp/1449380344/ref=sr_1_1?ie=UTF8&qid=1296339176&sr=8-1 Microsoft Visual C# 2008 Step by Step : http://www.amazon.com/Microsoft-Visual-2008-Step/dp/0735624305/ref=sr_1_1?s=books&ie=UTF8&qid=1296339208&sr=1-1 c The first place to start is at the official site for the certification. That’s here: http://www.microsoft.com/learning/en/us/Exam.aspx?ID=70-583&Locale=en-us c On that page you’ll find several resources, and the first you should follow is the “Save to my learning” so you have a place to track everything. Then click the “Related Learning Plans” link and follow the videos and read the documentation in each of those bullets. There are six areas on the learning plan that you should focus on - make sure you open the learning plan to drill into the specifics. c Designing Data Storage Architecture (18%) Books I’m Reading: Links: My Notes: c Optimizing Data Access and Messaging (17%) Books I’m Reading: Links: My Notes: c Designing the Application Architecture (19%) Books I’m Reading: Links: My Notes: c Preparing for Application and Service Deployment (15%) Books I’m Reading: Links: My Notes: c Investigating and Analyzing Applications (16%) Books I’m Reading: Links: My Notes: c Designing Integrated Solutions (15%) Books I’m Reading: Links: My Notes:

  Read the article

• Challenge: Learn One New Thing Today

  - by BuckWoody

  Most of us know that there's a lot to learn. I'm teaching a class this morning, and even on the subject where I'm the "expert" (that word always makes me nervous!) I still have a lot to learn. To learn, sometimes I take a class, read a book, or carve out a large chunk of time so that I can fully grasp the subject. But since I've been working, I really don't have a lot of opportunities to do that. Like you, I'm really busy. So what I've been able to learn is to take just a few moments each day and learn something new about SQL Server. I thought I would share that process here. First, I started with an outline of the product. You can use Books Online, a college class syllabus, a training class outline, or a comprehensive book table of contents. Then I checked off the things I felt I knew a little about. Sure, I'll come back around to those, but I want to be as efficient as I can. I then trolled various checklists to see what I needed to know about the subjects I didn't have checked off. From there (I'm doing all this in a notepad, and then later in OneNote when that came out) I developed a block of text for that subject. Every time I ran across a book, article, web site or recording on that topic I wrote that reference down. Later I went back and quickly looked over those resources and tried to figure out how I could parcel it out - 10 minutes for this one, a free seminar (like the one I'm teaching today - ironic) takes 4 hours, a web site takes an hour to grok, that sort of thing.  Then all I did was figure out how much time each day I'll give to training. Sure, it literally may be ten minutes, but it adds up. One final thing - as I used something I learned, I came back and made notes in that topic. You learn to play the piano not just from a book, but by playing the piano, after all. If you don't use what you learn, you'll lose it. So if you're interested in getting better at SQL Server, and you're willing to do a little work, try out this method. Leave a note here for others to encourage them.  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves - June 16-22, 2013

  - by Bob Rhubart

  2,819 people now follow OTN ArchBeat on Facebook. These are the Top 10 most popular items shared there for the week of June 16-22, 2013. Getting started with Java EE 7: Hands-on in 10 minutes | Lucas Jellema Oracle ACE Director and prolific blogger Lucas Jellema offers his take on the Java EE7 release and shares tips and resources to help you on your way. Not ‘how’ but ‘why’ should you upgrade to JDeveloper & ADF 11.1.1.7.0 | Chris Muir Oracle ACE Director Tim Hall and Oracle ADF Product Manager Chris Muir collaborated on this dialog that just might help you in your decision. OTN Architect Day: Cloud Computing - July 9, Redwood Shores, CA You won't need 3D glasses to see the technical sessions at OTN Architect Day: Cloud Computing, July 9, 2013. Redwood Shores, CA. It's free! It's live! Register now! Video: Frédéric Desbiens: Bringing Java to On-Device iOS and Android Apps (QCon NYC 2013) Oracle Application Development Tools product manager Frédéric Desbiens recaps his QCon New York presentation about how Java developers can leverage existing skills to develop enterprise mobile applications. OEPE 12.1.1.2.2 with GlassFish Tools released | Peter Benedikovic Peter Benedikovic's brief post offers an overview of some of the features in the new version of Oracle Enterprise Pack for Eclipse, released in conjunction with the release of Java EE 7. Oracle Enterprise Manager 12c Configuration Best Practices (Part 2 of 3) | Bethany Lapaglia Part 2 of Beth Lapaglia's 3-part series on the most commonly implemented configuration changes to improve performance and operation of a large Enterprise Manager 12c environment focuses on recommended WebLogic Server changes. Video: Doug Clarke: Polyglot Persistence: From NoSQL to HTML5 (QCon NYC 2013) Doug Clarke, EclipseLink Project Lead and Oracle Director of Product Management gives a very condensed version of his QCon New York presentation on "Polyglot Persistence: From NoSQL to HTML5." Podcast Show Notes: DevOps, Cloud, and Role Creep - Part 2 Automation and innovation had a huge impact on the manufacturing jobs of years gone by. Is something similar happening to some IT jobs? Oracle ACE Directors Ron Batra, Basheer Khan, and Cary Millsap discuss what's happening in part 2 of this 3-part podcast. Video: Reza Rahman: Building Java HTML5/WebSocket Applications with JSR 356 (QCon NYC 2013) Java EE/GlassFish evangelist Reza Rahman talks about how WebSocket provides "the basis for a new generation of interactive and live Web applications" for mobile developers. Lessons from Fusion HCM Implementations | Tim Warner Oracle ACE Tim Warner shares summaries of the Fusion HCM implementation experiences of several companies, as detailed in presentations at the 2013 Oracle HCM Users Group Conference. Thought for the Day "If the mind really is the finest computer, then there are a lot of people out there who need to be rebooted." — Tim Bryce Source: softwarequotes.com

  Read the article

• Principles of an extensible data proxy

  - by Wesley

  There is a growing industry now with more than 30 companies playing in the Backend-As-A-Service (BaaS) market. The principle is simple: give companies a secure way of exposing data housed on premises and behind the firewall publicly. This can include database data, as well as Legacy PC data through established connectors; SAP for example provides a connector for transacting with their legacy systems. Early attempts were fixed providers for specific systems like SAP, IBM or Oracle, but the new breed is extensible, allowing Channel Partners and Consultants to build robust integration applications that can consume whatever data sources the client wants to expose. I just happen to be close to finishing a Cloud Based HTML5 application platform that provides robust integration services, and I would like to break ground on an extensible data proxy to complete the system. From what I can gather, I need to provide either an installable web service of some kind, or a Cloud service which the client can configure with VPN for interactions. Then I can build in connectors, which can be activated with a service account, and expose those transactions via web services of some kind (JSON, SOAP, etc). I can also provide a framework that allows people to build in their own connectors, and use some kind of schema to hook those connectors into the proxy. The end result is some kind of public facing web service that could securely be consumed by applications to show data through HTML5 on any device. My gut is, this isn't as hard as it sounds. Almost all of the 30+ companies (With more popping up almost weekly) have all come into existence in the last 18 months or so, which tells me either the root technology, or the skillset to create the technology is in abundance right now. Where should I start on this? Are there some open source projects I can leverage? A specific group of developers I can hire? I'm confident someone here can set me on the right path and save me some time. You don't see this many companies spring up this rapidly if they are all starting from scratch with proprietary technology. The Register: WTF is BaaS One Minute Video from Kony on their BaaS

  Read the article

• How to recognize an optimus laptop?

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes kellogs@kellogs-K52Jc ~ $ lshw [...] *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:e080(size=8) Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ?

  Read the article

• Strange rendering in XNA/Monogame

  - by Gerhman

  I am trying to render G-Code generated for a 3d-printer as the printed product by reading the file as line segments and the drawing cylinders with the diameter of the filament around the segment. I think I have managed to do this part right because the vertex I am sending to the graphics device appear to have been processed correctly. My problem I think lies somewhere in the rendering. What basically happens is that when I start rotating my model in the X or Y axis then it renders perfectly for half of the rotation but then for the other half it has this weird effect where you start seeing through the outer filament into some of the shapes inside. This effect is the strongest with X rotations though. Here is a picture of the part of the rotation that looks correct: And here is one that looks horrible: I am still quite new to XNA and/Monogame and 3d programming as a whole. I have no idea what could possibly be causing this and even less of an idea of what this type of behavior is called. I am guessing this has something to do with rendering so have added the code for that part: protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Black); basicEffect.World = world; basicEffect.View = view; basicEffect.Projection = projection; basicEffect.VertexColorEnabled = true; basicEffect.EnableDefaultLighting(); GraphicsDevice.SetVertexBuffer(vertexBuffer); RasterizerState rasterizerState = new RasterizerState(); rasterizerState.CullMode = CullMode.CullClockwiseFace; rasterizerState.ScissorTestEnable = true; GraphicsDevice.RasterizerState = rasterizerState; foreach (EffectPass pass in basicEffect.CurrentTechnique.Passes) { pass.Apply(); GraphicsDevice.DrawPrimitives(PrimitiveType.TriangleList, 0, vertexBuffer.VertexCount); } base.Draw(gameTime); } I don't know if it could be because I am shading something that does not really have a texture. I am using this custom vertex declaration I found on some tutorial that allows me to store a vertex with a position, color and normal: public struct VertexPositionColorNormal { public Vector3 Position; public Color Color; public Vector3 Normal; public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration ( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); } If any of you have ever seen this type of thing please help. Also, if you think that the problem might lay somewhere else in my code then please just request what part you would like to see in the comments section.

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• Vostro 3560 Wireless on Ubuntu 12.10

  - by ngille

  I have been using Ubuntu 12.04.1 LTS on a Dell Vostro 3560 for some time now. At first I had issues with the wireless but I was pointed to a driver from Ubuntu 11.xx for a Broadcom BCM43142 and that did work! however with the upgrade to 12.10 I find myself at a lost because the driver will not work anymore. When trying to reinstall it I get "Driver of bad quality" I still install it but it just wont work. I cant seem to find anything on this issue for 12.10 and didn't know if anyone had any advice or if someone could point me in the right direction on resources to write my own driver for it. As I know C/C++ but have never written a driver for a Linux machine before. Thanks for any help! To be more clear I installed Ubuntu 12.10 Desktop on my Dell Vostro 3560 laptop. When I log in, my wireless card isn't visible in the Network Manager popup menu, although the wired network shows up there. I installed the driver mentioned below and that did help me on 12.04 but is now broken due to "Poor quality" a sudo lspci -nn command brings up: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) **02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)**

  Read the article

• In a multidisciplinary team, how much should each member's skills overlap?

  - by spade78

  I've been working in embedded software development for this small startup and our team is pretty small: about 3-4 people. We're responsible for all engineering which involves an RF device controlled by an embedded microcontroller that connects to a PC host which runs some sort of data collection and analysis software. I have come to develop these two guidelines when I work with my colleagues: Define a clear separation of responsibilities and make sure each person's contribution to the final product doesn't overlap. Don't assume your colleagues know everything about their responsibilities. I assume there is some sort of technology that I will need to be competent at to properly interface with the work of my colleagues. The first point is pretty easy for us. I do firmware, one guy does the RF, another does the PC software, and the last does the DSP work. Nothing overlaps in terms of two people's work being mixed into the final product. For that to happen, one guy has to hand off work to another guy who will vet it and integrate it himself. The second point is the heart of my question. I've learned the hard way not to trust the knowledge of my colleagues absolutley no matter how many years experience they claim to have. At least not until they've demonstrated it to me a couple of times. So given that whenever I develop a piece of firmware, if it interfaces with some technology that I don't know then I'll try to learn it and develop a piece of test code that helps me understand what they're doing. That way if my piece of the product comes into conflict with another piece then I have some knowledge about possible causes. For example, the PC guy has started implementing his GUI's in .NET WPF (C#) and using LibUSBdotNET for USB access. So I've been learning C# and the .NET USB library that he uses and I build a little console app to help me understand how that USB library works. Now all this takes extra time and energy but I feel it's justified as it gives me a foothold to confront integration problems. Also I like learning this new stuff so I don't mind. On the other hand I can see how this can turn into a time synch for work that won't make it into the final product and may never turn into a problem. So how much experience/skills overlap do you expect in your teammates relative to your own skills? Does this issue go away as the teams get bigger and more diverse?

  Read the article

• ArchBeat Link-o-Rama for 2012-08-28

  - by Bob Rhubart

  You may be tempted by IaaS, but you should PaaS on that or your database cloud journey will be a short one "The better option [to IaaS] is to rationalize the deployment stack so that VMs are needed only for exceptional cases," says B. R. Clouse. "By settling on a standard operating system and patch level, you create an infrastructure that potentially all of your databases can share. Now, the building block will be database instances or possibly schemas within databases. These components are the platforms on which you will deploy workloads, hence this is known as Platform as a Service (PaaS)." 'Shadow IT' can be the cloud's best friend | David Linthicum "I do not advocate that IT give up control and allow business units to adopt any old technology they want," says Infoworld cloud computing blogger David Linthicum. "However, IT needs to face reality: For the past three decades or so, corporate IT has been slow on the uptake around the use of productive new technologies." Do you agree? 9 ways cloud will impact IT employment | ZDNet ZDNet blogger Joe McKendrick condenses information from a recent report on how cloud computing will impact IT jobs. Number one on the list: New categories of jobs arising from cloud computing, which include "private cloud developers and administrators, departmental liaisons, integration specialists, cloud architects, and compliance specialists." Yeah, that's right, cloud architects. For more on cloud architects, including what you need to up your game to thrive in the cloud, check out "The Role of the Cloud Architect" on the OTN ArchBeat Podcast. Decisions, Decisions: The art, science, and politics of technology selection "When the time comes for a solution architect to make the final decision about the technologies, standards, and other elements that are to be incorporated into a particular project, what factors weigh most heavily on that decision? It comes as no surprise that among the architects I contacted, business needs top the list." Managing Oracle Exalogic Elastic Cloud with Oracle Enterprise Manager Ops Center Anand Akela's byline is on this post, but "Dr. Jürgen Fleischer, Oracle Enterprise Manager Ops Center Engineering" appears at the end of the post, so it's anybody's guess as to who wrote this thing. But the content includes a complete listing of the Exalogic 2.0.1 Tea Break Snippets series written by a member of the Exalogic team who goes by the name "The Old Toxophilist." So maybe the best thing to do here is ignore the names and focus on the very useful conent. Boost your infrastructure with Coherence into the Cloud | Nino Guarnacci Nino Guarnacci describes a use case that involved managing a variety of data caches that process complex queries and parallel computational operations, in order to maintain the caches in a consistent state on different server instances. Thought for the Day "No one hates software more than software developers." — Jeff Atwood Source: SoftwareQuotes

  Read the article

• New Oracles VM RAC template with support for oracle vm 3 built-in

  - by wcoekaer

  The RAC team did it again (thanks Saar!) - another awesome set of Oracle VM templates published and uploaded to My Oracle Support. You can find the main page here. What's special about the latest version of DeployCluster is that it integrates tightly with Oracle VM 3 manager. It basically is an Oracle VM frontend that helps start VMs, pass arguments down automatically and there is absolutely no need to log into the Oracle VM servers or the guests. Once it completes, you have an entire Oracle RAC database setup ready to go. Here's a short summary of the steps : Set up an Oracle VM 3 server pool Download the Oracle VM RAC template from oracle.com Import the template into Oracle VM using Oracle VM Manager repository - import Create a public and private network in Oracle VM Manager in the network tab Configure the template with the right public and private virtual networks Create a set of shared disks (physical or virtual) to assign to the VMs you want to create (for ASM/at least 5) Clone a set of VMs from the template (as many RAC nodes as you plan to configure) With Oracle VM 3.1 you can clone with a number so one clone command for, say 8 VMs is easy. Assign the shared devices/disks to the cloned VMs Create a netconfig.ini file on your manager node or a client where you plan to run DeployCluster This little text file just contains the IP addresses, hostnames etc for your cluster. It is a very simple small textfile. Run deploycluster.py with the VM names as argument Done. At this point, the tool will connect to Oracle VM Manager, start the VMs and configure each one, Configure the OS (Oracle Linux) Configure the disks with ASM Configure the clusterware (CRS) Configure ASM Create database instances on each node. Now you are ready to log in, and use your x node database cluster. x No need to download various products from various websites, click on trial licenses for the OS, go to a Virtual Machine store with sample and test versions only - this is production ready and supported. Software. Complete. example netconfig.ini : # Node specific information NODE1=racnode1 NODE1VIP=racnode1-vip NODE1PRIV=racnode1-priv NODE1IP=192.168.1.2 NODE1VIPIP=192.168.1.22 NODE1PRIVIP=10.0.0.22 NODE2=racnode2 NODE2VIP=racnode2-vip NODE2PRIV=racnode2-priv NODE2IP=192.168.1.3 NODE2VIPIP=192.168.1.23 NODE2PRIVIP=10.0.0.23 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=mydomain.com DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=racnode12-scan SCANIP=192.168.1.50

  Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >