Search Results

Search found 24734 results on 990 pages for 'floating point conversion'.

Page 522/990 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • How to get access to console to reset Cisco 3750?

    - by genehack
    I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

    Read the article

  • generating maps

    - by gardian06
    This is a conglomeration question when answering please specify which part you are addressing. I am looking at creating a maze type game that utilizes elevation. I have a few features I would like to have, but am unsure as to some of the implementation. I have done work doing fileIO maze generation (using a key to read the file, and then generate the level based on that file), but I am unsure how to think about this with elevation in the mix. I think height maps might be a good approach, but don't know how to represent them effectively. for a height map which is more beneficial XML(containing h[u,v] data and key definition), CSV (item1 is key reference, item2 is elevation), or another approach that I have not thought of yet? When it comes to placing the elevation values themselves what kind of deltah values are appropriate to have it noticeable at about a 60degree angle while not really effecting gravity driven physics (assuming some effect while moving up/down hill)? I am thinking of maybe going to procedural generation at some point, but am wondering if it is practical to have a procedurally generated grid (wall squares possibly same dimensions as the open space squares), or if designing to a thin wall open spaces is better? this decision will effect the amount of work need on the graphics end for uniform vs. irregular walls. EDIT: game will be a elevation maze shooter. levels/maps will be mazes with elevation the player has to negotiate. elevations will have effects on "combat" vision, and movement

    Read the article

  • Practical tips when transitioning to xmonad?

    - by meder
    I like the idea and concept of xmonad, however I still keep going back to gnome after an hour or so. This feels like when I first tried to learn vim, but I've gotten past the learning curve point and can't live without vim nowadays. I'm sure the time will come for xmonad too, but I was wondering if current xmonad users can provide transitional tips? FYI, I'm on dual monitors ( 19 inch and 17 inch ). Example of an issue I'm having while in this "transitional" stage: How do you manage keeping the browser and other programs that are most commonly used in full screen mode, since by default I think it opens up in a small tile that takes up a portion of the screen? Do you just shortcut it to make it open full screen, or do you actually not maximize it? Or are there advanced methods through preferences in the conf file, making certain programs take up X space?

    Read the article

  • November 2012 Chicago IT Architects Group Meeting Recap

    - by Tim Murphy
    So the year is coming to an end.  A hearty few came out two days before Thanksgiving to discuss adopting agile in the enterprise.  While Norm Murrin claimed to be nervous about talking in front of a group your wouldn’t have known by his presentation.  He really made a topic that has always been hard to relate very personal.  This lead to some great discussion.  I came out of looking for ways to investigate agile further.  His presentation can be found here. This was our last meeting for the year.  We are looking forward to next year and are starting to line up some speakers and topics.  At this point we have an Azure presentation coming in February and are ironing out talks for January and March.  If your would like to join us and have topics you would like to see presented contact me through this blog.  Either leave a comment here or use the contact page.  I would love to hear from you. Have a great holiday season and we will see you next year. del.icio.us Tags: Chicago Information Technology Architects Group,CITAG,Agile,Norman Murrin

    Read the article

  • Testing DNS configuration of domain by using hosts file?

    - by Alex Blundell
    I'm currently migrating a website to another server, and want to test the DNS configuration (more specifically, email mx records) before moving the domain over. I've configured the DNS on the new server to have mx entries for Google Apps in the same way that it's configured on the old server. The domain is controlled by nameservers on the old server at the moment, so the change would simply be updating the nameservers to the new servers. (What I'm getting at is DNS is controlled at the server level, not registrar level). Since the website has quite a number of users, I want to make sure the configuration is right before flicking the switch. For this, can I add an entry to the hosts file of my local computer to point the domain to the new server? I've done this, and the web server works, but would this also test the email mx records on the new server?

    Read the article

  • I have static noise in my speakers and headset

    - by Kazarion
    I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

    Read the article

  • Very high memory usage, but not claimed by any process?

    - by SharkWipf
    While stress-testing LVM on one of our Debian servers, I came across this issue where memory would fill up a lot to the point where it would run the server out of memory, but no process would claim the memory. See http://i.imgur.com/cLn5ZHS.png, and see http://serverfault.com/a/449102/125894 for an explanation on the colors used in htop. Why is this happening? And is there any way to see what process is using the memory? Htop is configured not to hide any processes, so what is it that htop is missing? In this particular case, I can fairly certainly say that it is caused, directly or indirectly, by lvmcreate, lvmremove or dmsetup, as I was stress-testing that. Do note that this question is not about solving the LVM problem, but about why the memory isn't claimed by any process. Stopping all LVM commands does bring the memory back down to <600MB.

    Read the article

  • Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

    - by Giuseppe Della Corte
    I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

    Read the article

  • Kubuntu 11.10 very slow during file I/O

    - by dko
    After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

    Read the article

  • Looking for something like Google's Picasa [closed]

    - by Skizz
    I almost like Picasa, but there are two issues that irk me and I wondered if anyone knew of an application that does what Picasa does but without the following problems: Network drives. Picasa is hopeless with network drives. Ideally, I'd like photos to be stored remotely and thumbnail databases to be stored locally with a client-server set-up to update client databases. The main aim is to get updates propagated to clients efficently, reduce network bandwidth and have quick browsing on the client. It needs to be snappy when used over a wireless network. This is just a minor point but the folder view looks awful, especially when it uses those tiny thumbnails. (Also, what is it with folders being drawn vertically. Having spent years looking at folders orientated horizontally, turning them on their side looks so wrong.)

    Read the article

  • Deploy multiple emails to email providers, but without showing favouritism

    - by Ardman
    We are currently developing a new email deployment system. We have the system currently configured so that it reads a record from the database and loads the email content and deploys it to the target. Now we want to move this over to multiple threads. That is easily done, except we then hit the email providers returning SMTP codes referring to "Too many connections", or "Deferred connection". The solution to this is to have a thread open up a connection to the email provider and deploy n emails and then disconnect. We have currently configured the application so that it will support these session based email deployments. The problem is this, the database table has multiple email addresses in and they aren't grouped by email provider because that will show favouritism. We need to be able to retrieve a set number of, i.e. Hotmail, emails (@hotmail.com, @hotmail.co.uk, @live.co.uk) so that we are reducing the number of connections to Hotmail and reducing the risks of getting the "Too many connections" error. We are at the point now where we have gone round and round in circles trying to get a solution, so I thought I'd throw it out there and see if anyone has any ideas? EDIT I would like to stress that this application is not used for spamming purposes.

    Read the article

  • How can I run a Virtual Machine in Windows 8 Developer Preview?

    - by Marc Gravell
    Since having issues installing Ubuntu side-by-side with Windows 8, I thought I'd try running Ubuntu in a VM instead. However, VMWare player has no love for Windows 8 yet (invalid VM86 or something similar), and AFAIK the promised hypervisor options are not currently available for playing with. So: Are there any VM hosts that do work in Windows 8 Developer Preview at this point? (specifically for running Ubuntu) Alternatively, does Wubi work on Windows 8? It seems not; from Wubi: An error occurred: 'WindowsBackend' object has no attribute 'iso_path'

    Read the article

  • Putting a Windows DC, Exchange in a DMZ

    - by blsub6
    I have one guy at my company telling me that I should put FF:TMG in between my main Internet-facing firewall (Cisco 5510) and put my Exchange server and DC on the internal network. I have another guy telling me that I should put the Exchange server and DC in a DMZ I don't particularly like the idea of having my mailboxes and DC's usernames/passwords in a DMZ and I think that Windows authentication would require me opening up so many ports between my DMZ and my internal network that it would be a moot point to have it out there anyways. What are some thoughts? How do you have it set up?

    Read the article

  • Deleting Time Machine in Mac OS X 10.6.4

    - by cappuccino
    Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

    Read the article

  • Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

    - by 5th Wheel
    The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

    Read the article

  • Can you plug-in the battery while laptop is on AC only?

    - by Ivan Petrushev
    Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

    Read the article

  • New site not appearing in index after change of address, no feedback from google webmaster tools

    - by Duffy
    Our change of address seems to not be taking effect. Here's the story so far: We're a web company and our product is called The New Hive. Our site used to be at thenewhive.com, but we decided to switch to newhive.com (drop the "the", it's cleaner). So the timeline of what I've tried, starting on July 29th: used 301 redirects for all pages (e.g. thenewhive.com/tag/art = newhive.com/tag/art) At this point we noticed that we had disappeared from search results when searching "The New Hive", the front page used to be all links to our site plus a couple news articles about the company. So on August 5th I: verified new domain in webmaster tools (old domain was already verified) submitted a change of address request on August 5th with Webmaster Tools / Configuration / Change of Address Then after another week, on August 13th I did this: Went to Webmaster Tools / Health / Fetch as google fetched our homepage and a couple sub pages, all successfully clicked "Submit to Index" for homepage As of today (August 23rd) we're still not showing up in the index. We're getting no warnings or feedback of any kind from the dashboard so I'm inclined to think something's broken with the dashboard rather than that something's wrong with our site from an SEO perspective. From the dashboard: No new messages or recent critical issues. Crawl Errors: No data available. From Health - Index Status: Total indexed 0 Ever crawled 42,490 Not selected 12 Blocked by robots 0 I'm really at a loss here, any help would be appreciated.

    Read the article

  • Best practice for combining a Java Applet/ Android interface?

    - by Pearsonartphoto
    I'm working on an online game, which I am seriously considering writing a Java Applet for it. The game is not overly complex on the features. I'm considering at some point having at least 3 versions of the game, which include a Java stand alone, applet, and Android game. I know from Design Patterns that the best way to use differing things like buttons and the like is to use a Bridge interface, where I have a common template for the common buttons. However, I'm having a bit of difficulty understanding what to do about the following. I know that Android programs use an Activity structure, which I am well familiar with, and that Applets extend the Applet interface, which I am not as familiar with. I also know that a stand alone java program uses basically a main() function, which doesn't have much structure. I'm convinced that there should be a way to design a common design pattern between the two, but somehow I'm missing what that is exactly. What can I do to make the different frameworks work with as much common code as possible?

    Read the article

  • securing unpatched websites

    - by neuron
    I have a client with a lot (read several thousand) websites in several old cms solutions that are no longer maintained. Now moving all of them to a maintained solution isn't really an option at this point. So I'm thinking about ways to secure the solutions without patching them. The solutions are mostly joomla 1.0/1.5 and wordpress. What I'm thinking is something like this: mod_suexec to lock everyone into their own home directory apparmor to deny any and all file writes by default. (exclude by default, include things like "images" directories). use htaccess to prevent anything in writable directories from being executed. (aka disable php_engine for images/ directory). mysql triggers to check the "users" tables to prevent adding new admins/superadmins. Does this make sense? Is it viable? Am I missing something obvious?

    Read the article

  • Quick change of SSH tunnel port forwarding options for SOCKS proxy

    - by user1335897
    The goal is to have access to internet thru SSH tunneling to SOCKS proxy. Me - ssh-on-my-vps - SOCKS proxy - internet Thing is I want to be able to quickly change the SOCKS proxy in this chain. If I use port forwarding on ssh, I assume I have to re-establish SSH tunnel with new SOCKS proxy address in parameters whenever I want to change proxy. Is that right? If it is, then I probably should always point SSH tunnel to localhost listening proxy server which will send requests to specified SOCKS proxy. So what local proxy I should choose that allows to easily change the destination SOCKS proxy via maybe reading from local file where I would put the SOCKS proxy address or via specifying new SOCKS address in its web-admin page?

    Read the article

  • Eloqua Experience 2013: Mystique, Modern Marketing and Masterful Engagement

    - by Mike Stiles
    The following is a guest post from Erick Mott, a social business leader at Oracle Eloqua. There’s a growing gap between 20th century marketing and a modern marketing way of doing business. I can’t think of a better example of modern marketing in action than what more than 2,000 people experienced in San Francisco at #EE13; customer-obsession, multichannel content, and real-time engagement all coming together at one extraordinary event. This was my first Eloqua Experience as a new Oracle Eloqua employee. In weeks prior, I heard about the mystique but didn’t know what to expect. What I’ve come to understand with more clarity is everything we do revolves around customer success, and we operate and educate at all times with these five tenets in mind: 1. Targeting: Really Know Your Buyer 2. Engagement: Create a 1:1 Relationship 3. Conversion: Visualize Guided Thinking 4. Analysis: Learn What’s Working 5. Marketing Technology: Enable and Extend the Cloud Product News from Eloqua Experience 2013 We made some announcements that John Stetic, VP of Products, Oracle Eloqua covers in this brief ‘Modern Marketing Minute’ video recorded after Wednesday’s keynote; summarized below, too: Oracle Eloqua AdFocus: While understanding the impact of a specific marketing channel was formerly relegated to marketers’ wish lists, the channels we now focus on are digital, social, and mobile. AdFocus gives marketers a single platform to dynamically create, manage and measure display ads alongside owned and earned media. AdFocus enables marketers to target only key accounts or prospects you want to reach with display ads, as well as provide creative content or personalized ad copy based on their persona and activities. Oracle Eloqua Profiler: The details of what we now know about customers have expanded into a universal customer profile, which can be used to create highly targeted segments. Marketers now can take data that’s not even stored in Eloqua to help targeted and score prospects for a complete, multichannel view of the customer. Profiler gives sales reps one, detailed view of the prospect to extend views beyond Oracle Eloqua asset activity (emails, forms, page views) to any external assets stored in Oracle Eloqua. Marketing Resource Management: New capabilities create more secure and controlled access to marketing resources and data. New integrations provide greater insight into campaign resources and management through a central marketing calendar and simplify resource management. Integrated Sales and Marketing Funnel: An integrated sales and marketing funnel view gives marketing and sales users, cross-functional teams, and executive management a consistent and clear view of pipeline performance. It also quickly provides users with historical metrics across different time spans and conditions. Eloqua AppCloud: More than 20 new AppCloud partners have been added to the community, which now includes 100+ apps. Eloqua AppCloud now provides modern marketers with an even broader range of marketing applications that help expand and enrich sales and marketing efforts; easily accessible in the Topliners Community. Social Capabilities: Recent integration between Oracle Eloqua and Oracle Social Relationship Management (SRM) deliver a comprehensive, scalable and integrated modern marketing solution. New capabilities include better tracking of social activities for a more complete customer profile. Engage Facebook custom audiences with AdFocus to deliver ads and meaningful experiences through trusted social networks. Biggest and Best Eloqua Experience. There’s a lot of talk in the industry about the Marketing Cloud. At Oracle Eloqua, we have been on a mission of delivering the most advanced and integrated modern marketing technology on the planet. It’s not just a concept but reality with proven execution, as seen first-hand this week in San Francisco. In this video, Kevin Akeroyd, SVP of Oracle Eloqua, provides some highlights of what made this year’s Eloqua Experience, exceptional, including Steve Woods’ presentation about the journey of modern marketers and Andrea Ward’s conversation with Vince Gilligan, creator of the Breaking Bad television series. The 2013 Markie Awards The Oracle Eloqua Marketing Cloud was best exemplified for me as 19 Markies were awarded to customers for their exceptional creativity and results as modern marketers. Wow, what a night to remember with so many committed and talented people working to create an extraordinary experience! To learn more about how to become a modern marketer, check out these resources. We look forward to seeing you next year at Eloqua Experience. More on Erick: 20 years experience at Oracle, Ektron, Sitecore, Lyris, Habeas, Nokia, creatorbase, Mark Monitor, Cisco Systems, GlobalFluency, Sun Microsystems, Philips NV, Elm Products and CBS TV. Patent holder with agency, Fortune 500, media, and startup company expertise. @mikestiles

    Read the article

  • Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

    - by tomdee
    I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

    Read the article

  • Blocking apache access via user agent string

    - by Tchalvak
    I've got a scripter who is using a proxy to attack a website I'm serving. I've noticed that they tend to access the site via software with a certain common user agent string (i.e. http://www.itsecteam.com/en/projects/project1_page2.htm "Havij advanced sql injection software" with a user_agent string of Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727) Havij). I'm aware that any cracking software worth it's salt will probably be able to modify it's user agent string, but I'm fine with the scripter having to deal with that feature at some point. So, is there any software out there for automatically blocking access & permanently blacklisting by matching user agent strings?

    Read the article

  • How do you have one IP address and many websites?

    - by johnny
    Hi, How can I have it where I have one IP address that sits on the Internet but many web names? For example, when a hosting company has a shared IP but I get unlimited domain names (along with everyone else on that box). I have a box on the Internet but I want to point to another machine that holds a different website when someone types in the different www...(it's sitting right next to it in just a different box). Is that all subdomaining? Thank you. EDIT: I am the hosting company.

    Read the article

  • What are the options for retraining formally as a software engineer?

    - by Matt Harrison
    I'm a self-taught programmer. I have a good undergraduate degree in Architecture (building, not software). I was always a science/maths kid and got consistency good grades in these subjects. However I became indecisive at undergraduate level and switched between Physics, Chemistry, Art and finally stuck with Architecture mainly out of the desperate need to finish any degree. As soon as I graduated, I ditched architecture and started writing code again professionally. I've been a programmer now for 3 years and I've progressed very quickly. I'm ambitious and I want to work for the top companies in this field at some point and I've realised I need a Computer Science education to be taken seriously (based on job ads for the big tech firms). I've applied for a few MSc programs in Computer Science but they've all rejected me because of my BA. It's just not an option for me to quit my job and go back and do another 3 year undergraduate degree in CS. I know I can study at this level because I've read most of the books on the reading lists for CS courses in the UK that I can find and I have this knowledge now, it's just I can't prove it on an application form. What options are available to me?

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >