Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 522/761 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • Enabling 8021q on a nic

    - by Chris Phillips
    Hi, I'm trying to get a vlan interface on a bonded nic (Centos 5.5) and whilst the interface has been very happily created with vconfig I'm seeing no traffic on it at all. Running tcpdump and tshark on the underlying eth0 I see no sign at all of vlan tags in the traffic, and I'm wondering if there's somethign I'm missing on the server side as the network dept say they are sending me the tagged data. I've got the 8021q module loaded, however under lsmod it shows it's only being used by the cxgb3 module, for an unused onboard iSCSI card, whereas my nics (on an HP DL380 G7) are driven by bnx2 and e1000e modules. Should these modules be listing 8021q as used module? should I have something conrete in /etc/modprobe.conf? Thanks Chris

    Read the article

  • Welcome to JavaOne!

    - by marius.ciortea
    Welcome to this year's JavaOne conference! We are glad you dropped by. We want to keep you informed of all the happenings around JavaOne: all the events leading up to the conference and all the events during the conference week itself. We'll cover announcements, news, planning (but we won't make you go to any meetings), and snafus (nothing that makes us look too bad, of course). We'll even throw in a contest or two to make sure you are paying attention. We'll post a couple of times a week, and then more frequently as we get closer to September. There's a group of us, and we cover the Java beat, JUGs, Oracle Technology Network, Oracle Solaris, and lots more. What do you want to hear about? Let us know.A group of us from the office went to see the movie Iron Man 2 (it just debuted in the United States) last week and it reminded us of Java, the Java community, and JavaOne. In all three cases, from many disparate (and sometimes seemingly incompatible) parts and people, something comes together that works, is cool, and helps make a better world. Right now, there are hundreds of little islands of planning, all busy answering questions for JavaOne: What sessions get selected? What goes in the Mason street tent (until a few weeks ago, Will there be a tent on Mason street?), What do the JUGS need? Which Oracle ACEs will be there? Can we do a surf theme at the OTN party? And, somehow, like an Iron Man suit, they all come together and work to make a great event. At least, we hope it will be great. That's for you to decide. Please don't be shy--give us your comments and suggestions. We'll be listening.P.S. You can attend Stark Expo online at Oracle.com/ironman2, where you can train to become a "Master Cloud Operative." I got my MCO certification. I wish I had a card to put in my wallet.

    Read the article

  • Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

    - by Duncan
    Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

    Read the article

  • Performance-Driven Development

    - by BuckWoody
    I was reading a blog yesterday about the evils of SELECT *. The author pointed out that it's almost always a bad idea to use SELECT * for a query, but in the case of SQL Azure (or any cloud database, for that matter) it's especially bad, since you're paying for each transmission that comes down the line. A very good point indeed. This got me to thinking - shouldn't we treat ALL programming that way? In other words, wouldn't it make sense to pretend that we are paying for every chunk of data - a little less for a bit, a lot more for a BLOB or VARCHAR(MAX), that sort of thing? In effect, we really are paying for that. Which led me to the thought of Performance-Driven Development, or the act of programming with the goal of having the fastest code from the very outset. This isn't an original title, since a quick Bing-search shows me a couple of offerings from Forrester and a professional in Israel who already used that title, but the general idea I'm thinking of is assigning a "cost" to each code round-trip, be it network, storage, trip time and other variables, and then rewarding the developers that come up with the fastest code. I wonder what kind of throughput and round-trip times you could get if your developers were paid on a scale of how fast the application performed... Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Netscreen-Remote Equivalent On Linux

    - by mojah
    We're running a simple Juniper VPN tunnel (using Juniper SSG5's) for outside-network access, which works great for Windows PCs since they can connect using the supplied Netscreen-Remote VPN client. Has anyone successfully managed to get this working under Linux? There are several alternatives, but none seem to actually work. The following were tried, but failed: - http://www.prolixium.com/netscreenlinux - http://david.dw-perspective.org.uk/Juniper-Networks-SSL-VPN-Client-On-Linux.html The official version is no Linux Client will ever be developed by Juniper themselves, but perhaps other (open) software exists that has been found compatible to Juniper's VPN?

    Read the article

  • VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

    - by Darius
    My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

    Read the article

  • MS Access: Why can I no longer right-click to add a hyperlink?

    - by gef05
    I've been working in an MS Access system for a while now. It's a form system where users enter data, add links, contacts etc. Pretty simple. On the form is a hyperlink field. For months I could right-click the field, and from the popup context menu select Hyperlink Add a hyperlink (something like that). This would allow me to browse to a network location, select a folder, click okay, and have the path automatically added to the field. Then it stopped working. It works fine for everyrone else but not me. What's stranger, if I go to another machine and login, I get the functionality back. Any ideas?

    Read the article

  • Migrating a Windows Server to Ubuntu Server to provide Samba, AFP and Roaming Profiles

    - by Dan
    I'm replacing our old Windows XP Pro office server with a HP Microserver running Ubuntu Server 12.04 LTS. I'm not a Linux expert but I can find my way around a terminal prompt, I'm a Mac user by choice. The office use a mix of Windows XP Pro machines and OSX Lion laptops. I included Samba during installation, and I'm planning on using Netatalk for the AFP and Bonjour sharing. I'd quite like to have samba make the server appear in 'My network places' on the Windows machines the way Bonjour makes it appear in finder on the Macs, if this is possible? I want to get to a point so that a user logging into Windows, gets connected to the Ubuntu server (do they need an Ubuntu user account?) which get them their shares and their Windows user profile (though a standard profile across users would do). The upshot is to make centralised control of user accounts (e.g. If a person leaves, killing their account on the server stops their Windows logon and ability to access Samba shares) and to ensure files aren't stored on the individual machines for backup/security purposes. I want to make this as simple as possible, so don't want to have loads of stuff I don't need, I just can't figure out: What I need at the server end: - will Samba be enough (already installed as part of initial installation), or will I need to cock around with LDAP (and how does this interact with Samba) - For someone of moderate Linux competence like me, is there a package that offers easy admin of user accounts, e.g. a GUI like phpLDAPadmin (if LDAP is necessary) How to configure the XP machines: - do I need to have the XP machines set up as a domain controller (I've no idea, really) - roaming profiles looks to offer the feature of putting the user's files on the server rather than the machine itself along with a profile that follows the user from machine to machine. Syncing Mac user's home folders with the server This is less of a concern because I can set up Time Machine if it comes to it, but I'd appreciate any recommendations of what approach I should take having the Mac home folders synced to the server.

    Read the article

  • BCM 2007 not opening contacts...

    - by Christopher
    Business Contact Manager for Outlook (2007) is refusing to open contacts. This problem appeared this morning on every machine (Windows XP SP3) on our network. The contact list does populate as normal, and contacts can be printed from the context menu, but the form that displays the contact information does not display, and no error message is thrown. I have turned on logging for BCM in the help menu, but nothing is being generated (or, leastways, I cannot find it anywhere). The SQL services appear to have started as normal. Anyone come across this before I take a deep breath and go with my boss' suggestion of "just reboot the server"? Any other information you need? Thanks.

    Read the article

  • Connect two subnets without router

    - by Shcheklein
    I got two Comcast routers with two different subnets on each. Every subnet contains 5 static IPs. Two questions: Are there any problems if both routers and machines from both subnets are connected into one switch? Security issues doesn't matter there. I need to know if there are some performance or other problems. Is it possible to make machines from different subnets to see each other if they all are connected into one switch? Some static routing, add ARP records or somethig else ... I just want to avoid configuring second ethernet adaptors, third router or something. And I need to connect these subnets vai high-speed local network.

    Read the article

  • Web application stopped behaving normally after migration from Dedicated servers to Ec2 servers

    - by sunny
    Web application stopped behaving normally after migration from Dedicated servers to Ec2 servers Old Dedicated Server configuration systemtype: 32 bit operating system. RAM: 3.99 Gb Ram Processer : 1.86 GHZ New Servers in EC2 systemtype: 64 bit operating system. RAM: 3.99 Gb Ram Processer : 2.73 GHZ - 2.31 GHZ Everthing is working fine in our production server. But as we migrated our web application from old servers to new servers and transferred the entire network traffice to new servers.Site suddenly stopped behaving abnormally. Sometimes it's super fast Some times slow. sometimes normal some times super slow and sometimes no response This all above happens with a time interval or around 2 - 3 minutes. This went on happening 8 - 10 hours. Few differences in old and new servers are Old servers are using II6 and New servers are using IIS 7.5. We are using exactly the same code in the old and new servers. Even the ec2 servers are having higher CPU then older servers but still having lower. But not sure how this is happned. Please suggets your views...

    Read the article

  • OpenVZ multiple networks on CTs

    - by picca
    I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

    Read the article

  • Is it safe to use S3 over HTTP from EC2, as opposed to HTTPS

    - by Marc
    I found that there is a fair deal of overhead when uploading a lot of small files to S3. Some of this overhead comes from SSL itself. How safe is it to talk to S3 without SSL when running in EC2? From the awesome comments below, here are some clarifications: this is NOT a question about HTTPS versus HTTP or the sensitivity of my data. I'm trying to get a feeling for the networking and protocol particularities of EC2 and S3. For example Are we guaranteed to be passing through only the AWS network when communicating from EC2 to S3 Can other AWS users (apart from staff) sniff my communications between EC2 and S3 Is authentication on their api done on every call, and thus credentials are passed on every call? Or is there some kind of authenticated session. I am using the jets3t lib. Feedback from people with some AWS experience would be appreciated. Thanks Marc

    Read the article

  • Purging old Exchange email/content on SBS2003

    - by Aitch
    We have a Windows SBS 2003 server that used to manage email, calendaring and such like for a small organisation via Exchange. We successfully migrated everything to Google Apps for Business about 18 months ago. The server only provides local network services now. We have backed up and virtualized this machine and would now like to purge any residual mail to save disk space and speed up backup etc. The disk space is such that I believe the Exchange mail is still on there somewhere. I've stumbled through System Manager and poked about but cannot confirm whether this is the case. Where would this live and how might I go about it? (Disclaimer: I'm not a Windows admin, Linux is my thing...)

    Read the article

  • Webinar, June 27: Application Intelligence and Connected Devices

    - by terrencebarr
    Oracle and Beecham have recently conducted a market survey on use of Connected Devices for M2M & Internet of Things (IoT) applications and new trends. On June 27, 9 am ET the first session in this webinar series addresses intelligence in connected devices. Join Peter Utzschneider from Oracle and Robin Duke-Woolley of Beecham Research as they discuss the findings from this survey and the implications for the M2M & IoT connected devices market: What are the key business drivers of your connected devices program? To what extent do you expect the intelligence required for M2M & IoT applications to change? Would these changes occur at the network edge, at the data center, or both? What are the impacts of these changes on ISV’s and device manufacturers? What are the opportunities for other M2M & IoT players? To attend, please register for free or click on the image. Cheers, – Terrence Filed under: Embedded Tagged: Connected, devices, iot, Java Embedded, Java ME Embedded, M2M, webinar

    Read the article

  • Internet Connection Sharing on OSX causes delayed web requests

    - by Vanthel
    I have an iMac connected to my router via WiFi, and a PC connected by ethernet to the iMac. The iMac is sharing its connection. I've never had a problem with this in the past (pre Lion anyway) but now all web page requests take an eon to resolve on the iMac (they are instant on the PC). It suggests to me the iMac is attempting to resolve it through the PC first every time? I've tried reordering the connections in the network settings but that made no difference.

    Read the article

  • Windows 7 keeps changing my language(keyboard) settings

    - by Hans
    I am using Windows 7 Ultimate on a Windows network. My default settings is Danish locale, Danish keyboardlayout, but English system language. I only have Danish keyboard layout installed (in Text Services and Input Languages). However, at the login screen I can choose Danish and English, but whatever I choose Windows 7 changes system language (and keyboard layout!) to English (United States). Since this is a per-App setting I must change the language setting (language bar in the taskbar) Where can this be changed system wide and permament?

    Read the article

  • Stripping a spike from rrdtool when removespike.pl doesn't find any

    - by raccettura
    I know when rrdtool graphs (using rrdtool 1.4) network traffic and the host is restarted a spike is a pretty normal thing to see. In the past I've just run that removespike.pl script that is hosted by the author and it strips the spike and I'm good to go. The last few times I've rebooted removespike.pl finds no spikes, but it's obvious that there are spikes. So my question is, how can I easily remove these spikes and get my graphs usable again? Right now it's so skewed it's meaningless.

    Read the article

  • Making a Live Thumb drive boot with Persistent files, settings AND *drivers* that load on boot?

    - by Luke Stanley
    I have seen https://wiki.ubuntu.com/LiveUsbPendrivePersistent but it's a mess. What methods support persistent drivers as well as files and settings and don't screw up lifespan of the flash drive? I'd like to see your personal recommendations on say, Portable Linux, USB Creator, Remastersys + Unetbootin, etc Backstory: I have a Inspiron 1525 that's hard drive has been slowly dying. I want to switch to a live USB/CD/DVD system until I can get it repaired but my laptops internal wifi device requires a network connection by another means for Xubuntu to let it work, and then I have to enter my Wifi key again, and THEN I have to reinstall Skype etc... I'd be damned every time I have to shut the laptop down. I'm ok with making a shell script for installing apps and copying settings as required but a good persistent install should make this old hat and slow and it doesn't take care of drivers. The last time I tried making an ISO with Remastersys it didn't seem to copy all the required settings.

    Read the article

  • Links to detailed instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

    Read the article

  • How do I configure networking when using XEN on 12.04 Server

    - by Ingram
    I'm following this guide, https://help.ubuntu.com/community/XenProposed, and I'd like to setup a static IP address, but I don't know how. I'm using 12.04 Server. This is the step I'm having trouble at (I'm using eth1): Edit /etc/network/interfaces, and make it look like this: auto lo iface lo inet loopback auto xenbr0 iface xenbr0 inet dhcp bridge_ports eth0 auto eth0 iface eth0 inet manual I do this, and here is my output from ifconfig: eth1 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:478264 errors:0 dropped:0 overruns:0 frame:0 TX packets:2895 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:46470058 (46.4 MB) TX bytes:214620 (214.6 KB) Interrupt:17 Memory:fa000000-fa012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) xenbr0 Link encap:Ethernet HWaddr 00:17:a4:f8:79:20 inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::217:a4ff:fef8:7920/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:471842 errors:0 dropped:0 overruns:0 frame:0 TX packets:2795 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:37005780 (37.0 MB) TX bytes:182010 (182.0 KB) So how do I give this system a static IP address? Sorry, I'm not that familiar with networking on Ubuntu.

    Read the article

  • OEPE with ADF binding support available: Total Eclipse

    - by Frank Nimphius
    The current release of Oracle Enterprise Pack for Eclipse, though in technology preview, brings Oracle ADF binding to the Eclipse IDE. You can download the Software from the link below: Oracle Enterprise Pack for Eclipse (12.1.1.1.0) Technical Preview New June 2012 Certified on Windows 7/XP/Vista, MacOS, and Linux. Supported on JDK 6. For many Eclipse users, ADF is new and therefore I expect them to need guidance and help in case they run into issues they don't know how to recover from. Similar, ADF users familiar with Oracle JDeveloper that want to give OEPE a try, will find things different in Eclipse and thus may have questions.  For both audiences I suggest to post issues to the OEPE forum on the Oracle Technology Network: I'll extend my OTN monitoring to include the OEPE forum on a daily basis to learn about developer needs, requirements and - of course - to catch bugs that need to be filed. From my side this is a part-time involvement, which means that the more ADF questions show on the forum, the more help I could need in answering them. The OTN forum for JDeveloper in my opnion wouldn't be the right place to go to unless the question is a generic ADF question that is not dependent on the integration in Eclipse. Here's the OEPE forum link for a start https://forums.oracle.com/forums/forum.jspa?forumID=578 Frank

    Read the article

  • Glusterfs : 'No route to host' for fstab mount in CentOS

    - by son_of_fire
    I am using glusterfs, and am using fstab in this way: <IPADDRESS>:/<VOLUMENAME> /some/mount/point glusterfs defaults,_netdev 0 0 but the logs for the mount continue to say the following. [<TIMESTAMP>] E [socket.c:2161:socket_connect_finish] 0-<VOLUMENAME>-client-1: connection to <IPADDRESS>:24007 failed (No route to host) I know this is not true, since when the system is up and running, I can easily issue a mount and the volume gets mounted. (I've done this by using rc.local) after reading more I have seen that using _netdev is preferred, and that if the host cannot be reached netfs will remount the volume after the network comes up, but that is not happening. (netfs is running). Is there a way to make the mount happen at a different time without using a script? (I would prefer to use fstab to manage the mounting even though I can use a script.)

    Read the article

  • Connmand Equivalent

    - by CurtisS
    What's the connmand equivalent on Fedora 15? I'm trying to connect to the Internet with Fedora 15 but I'm having problems. It can't see my network connection and when I try to run nm-connection-editor I get: (nm-connection-editor:9816): WARNING: **get_all_cb: couldn't retrivew system settings properties ... (nm-connection-editor: 9816): WARNING **: fetch_connections_done: error fetching connections: (32) ... (nm-connection-editor: 9816): GVFS-RemoteVolumneMonitor-WARNING ** cannot connect to the session bus: (nm-connection-editor: 9816) GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus ... g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOSStream returned 0 bytes onan async read (g-io-error-quark, 0). Exiting.

    Read the article

  • rip in RouterSim

    - by Olga Anastasiadou
    I have to design a network given IPs 146.124.0.0/16 and 146.124.10.0/24. My given requirements are : at least 60 more subnets and maximum 1000 hosts per subnet and use of RIP. I have 3 routers (RA1, RA2, RA3) and 3 subnets (Sales, Logistic and Deposit). I gave WAN1 (RA1-RA3): 146.124.10.0/30, WAN2 (RA2-RA3) : 146.124.10.4/30 and WAN3 (RA1-RA2) : 146.124.10.8/30 and Sales : 146.124.0.0/22, Logistic: 146.124.4.0 and Deposit : 146.124.8.0. When I tried to configure RIP protocol, it didn’t work (I use routerSim 6). What am I doing wrong? Can anyone help please????

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >