Search Results

Search found 16787 results on 672 pages for 'mod disk cache'.

Page 522/672 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Virtualbox: Raw linux partition not booting

  - by abalter

  I have a dual-boot laptop with Windows 7 and Ubuntu 12.04. I am trying to boot the ubuntu partition from windows using Virtualbox. I have successfully created the .vmdk, and created the virtual machine. However, I can't get it to boot (in Virtualbox). All I get is a black screen with the cursor in the top left. I wonder if I'm specifying the partitions correctly. My Ubuntu install has 3 partitions: \, \boot, \home. No swap partition. These are all in Disk 0, partitions 3,4,5 respectively. The command I used to create the .vmdk is: VBoxManage internalcommands createrawvmdk -filename C:\Users\abalter\.virtualbox\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 3,4,5 Then I create a virtual machine based on that .vmdk. Why won't it boot?

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• Booting from a different partition.

  - by Legolas

  I have a question. I run Windows7 on C:\ drive and it is the only operating system. I want to install Windows8 developer installation (iso image), and I have it saved in a new partition I created, which has only this.G:\ I want to boot from this partition G:\ so that I can install Windows 8, but in my boot options I get only Internal Hard Disk, CD ROM, and USB Drive. I don't have a USB drive. How can I boot from G:\ with that iso image ?

  Read the article

• After moving our Servers to a virtual environment using VMware - SQL timeouts came in, why?

  - by RayofCommand

  We moved our servers to a virtual cloud (VMware) where only our servers are in. But as soon as we finished migrating everything we are fighting against SQL Timeouts and machine slowdowns we can't explain. Even though we ~ doubled the servers capacity while switching from physical to virtual. Now I googled and found that we are not alone. People are complaining about poor performance after moving to a cloud managed by VMware. Are there any known issues? Sometimes our services can't access a disk or SQL receives a timeout and we have no idea why.

  Read the article

• How to prevent Google Toolbar being installed in Portable Firefox?

  - by HyperHacker

  Recently, the campus computers installed Google Toolbar in Firefox. Now, I have no use for this toolbar, so I don't want it there. For that and other reasons, I installed Portable Firefox on a USB stick and use that instead. Somehow, when I log into one of these machines and start Portable Firefox, guess what? "Thank you for installing Google Toolbar." No! I don't want some IT guy choosing what extensions to install on my personal Firefox on my USB stick. I can uninstall it but next time I log in, it comes right back. I suppose PF is for some reason reading things from the local disk, or there's some kind of background process installing it? How do I prevent extensions being installed without my consent?

  Read the article

• Encrypt two drives with Truecrypt with password before boot

  - by Deshroom

  i'm using laptop and PC with single HDD with full disk encryption. I know how works truecrypt on single drive because i use it everyday. My second laptop has 2 HHDs. My question is how to encrypt first 128GB SSD and second 1TB HDD in same way. I have multiple applications installed on second drive so i want to have it accessible during boot in ex. Steam in installed on second drive and it starts with windows. How to do it? can i encrypt two drives in truecrypt and unlock it via password before boot? My main reason is i want to RMA laptop without removing disks or data - my data need to be encrypted. Thank you.

  Read the article

• Windows Reformatting

  - by Shimz187

  I recently began formatting a hard drive via USB extenal drive when the power went off. When i powered it up again and connected the drive the drives dont show up under my computer. When i go to disk management, i see the drive but now it says unallocated space. The drive was initialy partitioned into 2 drives. I cant see both drives now. Tried running GetDataBack NTFS recovery tool and it only comes up with errors. There seem to be no information on the drive from the data recovery utility. I know the information is there but how do i find it. HELP!!!!

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• xen virtual machines get to many porcentages of cpus

  - by ki0

  Hi everyone, This is my question. I have one Xen server with 8 CPU's and 6 virtual machine running, each virtual hard disk are running in diferent physical hardisk. Everything worked fine but sometimes one virtual machine get almost whole CPU, if the Domain-0 is 90% that is normal, the virtual machine is 500% usage of CPU. I have improved that it is not depends who are working with the VM even when nobody are working with the server this still happens. I dont know what happen. Anyone have any idea?¿ or anyone have happened the same?¿

  Read the article

• How to fix a folder content glitch in a FAT32 filesystem?

  - by kagali-san

  at my 450gb fat32 partition, a directory has a wrong content after improper usb drive disconnect; was: /files (total 250gb) /files/folder/ /files/folder2/ /files/somethn.gs Now: /files/weir?d?name, 5 mb Windows and Linux are saying that most (400 of 450gb) disk space is occupied, but sum of all files/dirs is about 130gb, so it seems that files are still there?. No write attempts since discovery; Rejected tools/methods: chkdsk(Windows7): checking completed, but no changes. fsck.vfat: attempted to ruin drive even more (there is a lot of LFN and unicode names). EasyRecovery. Didn't see the target folder (maybe wrong scan options? tried best match, but not raw scan - it would take days since the drive is usb 5200 rpm..).

  Read the article

• Program that converts Windows 7 install files into iso

  - by Stephen R

  I recently got to build a custom image of Windows 7 and I can successfully install it on other computers. The problem I have is right now I have to do the installs from a bootable hard drive. I would much rather do this from a disk or ISO. I know there is a program that will take the Windows 7 system files and convert it to ISO image, but I can't think of it. Otherwise, could I just simply burn the files to a DVD? Would that work?

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Resize a new database to predicted maximum size

  - by John Oxley

  Currently I have a SQL Server database which is about 2 Gb. I know over the next year it's going to grow to a maximum of about 10Gb. Hard drive space is not an issue in the slightest. Is there a down side to resizing the datafile to 20Gb now, then defragmenting the hard drive? Should I resize the log file to 1Gb as well? Something ridiculously large so that fragmentation doesn't happen there either. With this question I would like to avoid the datafile becoming fragmented on the disk itself, but I don't want to negatively impact performance.

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

  - by xtian

  With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

  Read the article

• System File Checker vs Service Pack Reinstall

  - by Nixphoe

  When trying to repair slow workstations, I've found that running sfc /scannow helps quite a lot in a few of my environments running really old computers. I've also seen recommendations of reinstalling the last service pack after software installation to help keep the system stable. That makes sense as it would replace a lot of the dll files with the ones that would come with the service pack. They both seem to do the same thing, but SFC some times will ask for a disk, where the Service Pack will not. What is the main difference between the two?

  Read the article

• Best way to partition 1 TB (Linux and Windows 7)

  - by Simon

  Is there an intelligent way to partition 1 TB and be prepared for resizing/adding/deleting partitions? I was thinking about LVM, but as far as I remember, Windows 7 can't be installed on logical volume right? For now my plan is: - ~150 GB for Windows 7 and other stuff (Visual Studio..., maybe I'll split it 100/50 or something like that) - simple NTFS - 850 GB = LVM - disk for Linux (Ubuntu) and other stuff virtual machines, etc. I'm mostly interested in how and what tools should I use to get easy in maintain partitions for both systems.

  Read the article

• Defrag/TRIM settings for hybrid hard drive?

  - by Joel Coehoorn

  I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

  Read the article

• FreeNAS 8 and ext fs

  - by oraclecow

  i'm trying out freenas8 for my personal NAS, i have lots of data that was in an ubuntu server, but somehow i never got the file sharing right. on freenas things just worked. i installed on usb, tried sharing the windows disk, and i can see it on my windows 7 right away. my question is, is it ok to use ext4 fs from my ubuntu instalation ? i only saw zfs, ufs, ntfs, and ext2 option to import, i havent plugged in the disks yet, but im wondering the consequences, like if it asked to format like in windows to use. i can format the disks of course, but 5-6 TB of data juggling and reformatting is a lot of work, unnecessary work i think, does the zfs worth the trouble of formatting everything ? since i'm thinking to use it if i have to format it anyway and zfs looks more interesting than ext2.

  Read the article

• Creating image of NTFS partition in Ubuntu

  - by Pappai

  Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

  Read the article

• How to avoid loop limitation in a openvz container?

  - by mat.viguier

  On a openVZ containing Deb7 I need to lock the maximum size of a folder, which is used to upload on a php based web server. The directory is synced, so I have to lock the maxsize. MAXSIZE should be upgradable by adding some physical disk later ... I want to use a file as a block device for a file system. So I have done : dd if=/dev/zero of=/disk2/filesystem.dat bs=1M count=100 Then, I made the filesystem on it mkfs.ext4 filesystem.dat Then I tried to mount it : mkdir /opt/filesystem ; mount /disk2/filesystem.dat /opt/filesystem My OpenVZ (it is on a VPS) has no loop module in the kernerl. So I got Could not find any loop device as usual under OpenVz So i think I have to use FUSE, but I really do not know HOW .... Any idea on locking the size of directory under OpenVZ ?

  Read the article

• How do I automatically download files to a Kindle 2 whenever its USB connection is plugged into a Windows 7 machine?

  - by Bob Cross

  The inspiration of this question is the Gadget Lab article How To Make Your Kindle Into an Automatic Instapaper. In that article, they describe an implementation of an Automator workflow that: Detects the connection of a portable disk (which the workflow assumes is the Kindle 2). Downloads the Instapaper mobi file containing the text version of the articles marked for "Read Later" to the computer. Downloads the mobi file from the computer to the Kindle 2. All of this is straightforward in terms of functionality but it is not immediately obvious how to do step 1 on a Windows box. Is the Task Scheduler the first step? If so, which event should be the trigger for the rest of the task?

  Read the article

• Can I enlarge OS C: drive of my Windows 8 PC?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• Can SysPrep (or anything else) be used to make a Win XP partition from another computer bootable?

  - by chris5gd

  I've used Paragon Backup and Recovery Free as recommended to me in my other question, to backup my C: (Win XP) and D: (installed apps) partitions. Before taking the rather scary step of breaking the RAID 0 array on which it's currently installed, and restoring to one of the individual drives, I'd quite like to test the restorability of the imaged partitions. I've restored them on to a spare disk in another computer, which of course won't boot from them in their current state. Is it possible to use SysPrep (or another tool) on the restored partitions, to make it bootable?

  Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >