Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 522/886 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • All downloads being interrupted

    - by Jake
    System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

    Read the article

  • Shibboleth SP, IIS

    - by OrangeGrover
    I have a Shibboleth SP instance on Server 2008 R2 and everything is authenticating fine with the IdP. I was testing protecting a single page and that is working fine by doing the following in the shibboleth2.xml file: <Host name="MyUrl.com"> <Path name="page.jsp" authType="shibboleth" requireSession="true"/> </Host> When I go to https://MyUrl.com/page.jsp I get redirected to enter credentials, and then end up back on the page.jsp Now I found out that I should be protecting the Document Root, but not the entire site. Basically I need to be authenticated by Shibboleth, and once I am, then I'll get redirected back to the Document Root where a session is set with separate software, I get redirected to a different page and the Document Root will never be used again. Any help is appreciated

    Read the article

  • setting ulimit and ubuntu 8.04

    - by Wizzard
    Hi there, We have two ubuntu 8.04 servers. With the database server I set the table_cache to 1000 however when I restart mysql the status only shows 257 and the open files limit says 1024 I adjusted ulimit by doing ulimit -n 8192 and then restarting mysql; this seemed to do the tick however after a few hours I did ulimit -n and saw it had returned back to 1024 Bit of a worry. I edited the /etc/security/limits.conf and added mysql soft nofile 8192 mysql hard nofile 8192 then rebooted, no change. I then edited and change mysql to * rebooted, no change I then edited and changed it to one line * - nofile 8192 and rebooted, no change. cat /proc/sys/fs/file-max gives me 768730 sysctl fs.file-max gives me fs.file-max = 768730 I am at a bit of a loss to how I can set and keep the ulimit value set so I can increase the table cache properly on mysql.

    Read the article

  • Restored Domain Controller does not display any information using dcdiag command

    - by dasko
    I am testing restoring a domain controller from system state backup to different hardware in a non production environment as a sanity check for our restoration procedure. When i run the dcdiag command I get "blank info back" and all that is displayed are two lines as follows: Domain Controller Diagnosis Performing initial setup: and then I am returned to the command prompt. Even when I do dcdiag /v i get the same result. I have double checked the DNS settings and Active Directory works properly. All FSMO roles are being held by this restored Domain Controller. I am able to join test pc's to the domain without issue etc Is this a common issue or is there something that I am missing. Thanks.

    Read the article

  • Windows server 2008 issue

    - by Matt Fitz
    We have 2 domains “pdc1” and “devkc” both are windows 2000 Active Directory domains with a 2-way trust relationship in place., has been this way for years. All of our developer machines are joined to the “devkc” domain but the users log into there accounts on the “pdc1” domain. This all works fine with Windows XP, 2000 and 2003 server. However with Windows Server 2008 the users can only log into the “devkc” domain that the machine is joined to, they can not log into the “pdc1” domain. The following error results: "The security database on this server does not have a computer account for this workstation trust relationship” Any ideas would be greatly appreaciated Thanks Matt Fitz

    Read the article

  • IP addresses for Windows Azure servers seem to be from the US, when the servers are supposed to be located in Europe

    - by paradroid
    I have a couple of test servers on Windows Azure. One is in the North Europe location and the other is in West Europe. I yet to get around to testing which location offers better connection speeds from where I am (London, UK). The Northern Europe Azure datacentre is apparently in Ireland and the West Europe datacentre is in the Netherlands, which is weird in itself I think. But what I am confused about are the IP addresses are both 168.63.xxx.xxx. GeoIP lookup says that they are both located in the US, and traceroute from London to the addresses get to the US before failing to respond pings. What's going on?

    Read the article

  • Requiring SSH-key Login Via PAM From Specific IP Ranges

    - by Sean M
    I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config.

    Read the article

  • How To Grant Folder permissions for WMSvc IIS

    - by LillyPop
    Im using Web Deploy with IIS7 and I want to grant permissions on a web site physical folder. Ive done this before (as I have another physical folder with r/w for WMSvc) but I have forgotten how I did it! When I go to the physical folder Security Tab Edit Add Object Name = WMSvc Check Names, I get 'An object named WMSvc cannot be found'?? I have the 'WMSvc' object listed fine in the 'Groups or usernames' on the other Folder I mentioned above. I feel a bit daft, what am I doing wrong, how can give folder permissions to WMSvc object on a physical folder?

    Read the article

  • FastCGI Error Access to the script denied

    - by ArtWorkAD
    I have a Debian Squeeze server running nginx + php-fpm + fastcgi. I have a typo3 installation on this server which runs well. No I installed OTRS and I get an error that I do not understand: 2012/06/25 15:35:38 [error] 16510#0: *34 FastCGI sent in stderr: "Access to the script '/opt/otrs/bin/fcgi-bin/index.pl' has been denied (see security.limit_extensions)" while reading response header from upstream, client: ..., server: support.....com, request: "GET /otrs/index.pl HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "support.....com", referrer: "http://support.....com/" Why do I get this error? The otrs directory is writable for the webserver, so this is not the problem. Any ideas?

    Read the article

  • Does the OS X DHCP client support classless static routes (RFC3442)?

    - by cense
    Simply put: does Mac OS X support RFC3442? RFC3442 implements DHCP codes (121 and 249) to provide classless static routes to DHCP clients. I can only seem to find rather old information circa 2005-2008 which implies that OS X does not support RFC3442. Any chance this has changed recently and I'm just doing something wrong while setting it up? My anecdotal testing seems to confirm that OS X does not support RFC3442 but I'm looking for confirmation. If OS X still doesn't support RFC3442, what is an alternative method of pushing static routes to OS X clients?

    Read the article

  • Snort: not logging anything

    - by ethrbunny
    My site seems to be the target of quite a bit of probing over the last few months. In an attempt to get a better handle on this I installed SNORT on one of the machines that has external exposure. Something must not be installed correctly as I see lots of probing in /var/log/messages but snort isn't logging anything. System: CentOS 6.2 (32 bit) Snort: (latest build and rules) Snort configured from this v excellent site: http://nachum234.no-ip.org/security/snort/001-snort-installation-on-centos-6-2/ snort running as daemon: /usr/local/bin/snort -d -D -i bond0 -u snort -g snort -c /etc/snort.d/snort.conf -l /var/log/snort The snort.log file is empty despite hundreds (or more) failed login attempts from individual IP addresses. Maybe Im missing the purpose of SNORT? I was hoping it would log this sort of info.

    Read the article

  • VirtualHosts Stopped Working

    - by Kevin C.
    I'm working on a website and have WAMP setup for local testing. Usually I set up virtual hosts using httpd-vhosts + the hosts file without a hitch. All of a sudden, my virtual hosts are no longer working. I know that it's pointing to Apache because I get a '403 Forbidden' error, but that's about it. All of my previously working virtual hosts no longer work as well. Anybody know what's going on? httpd-vhosts.conf <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "C:\Documents and Settings\kevin\Desktop\websites\fusion" ServerName ebrochures ErrorLog "logs/your_own-error.log" CustomLog "logs/your_own-access.log" common <directory "C:\Documents and Settings\kevin\Desktop\websites\fusion"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 </directory> hosts file: 127.0.0.1 fusion And yes, I am including the virtual hosts file in my httpd.conf file: # Virtual hosts Include conf/extra/httpd-vhosts.conf

    Read the article

  • Software Router: pfSense or Vyatta ?

    - by Kedare
    Hello, I'm rebuilding my home network and I am look to an alternative to the very expensives Cisco. So I take a lookt at the software routers, I've found Vyatta and pfSense. I have tested both and I find both great, but I don't know which one to choose. I need a router software that : Supports IPv6 (both do with pfSense 2 RC1) Allows me to join an OpenVPN Network Is free Configurable by CLI (WebGUI is a plus) After some testing, it looks like both a very featured, but Vyatta looks more CLI-centric where pfSense looks more WebGUI-centric. Which do you recommend me ? Why ? Is there any limitations on the free version of Vyatta ? I would like to run it on a small box like Soekris ones, it that possible ? (pfSense will run it, but I'm not sure with Vyatta) Thank you

    Read the article

  • Apache and mod_authn_dbd DBDPrepareSQL error

    - by David Brown
    I am running Apache 2.2.17 on Suse Linux 11. I have installed the mod_authn_dbd module to allow authentication using a MySQL database. Simple digest authentication works absolutely fine using the following directive: AuthDBDUserRealmQuery "SELECT loginPassword FROM login WHERE loginUser = %s and loginRealm = %s" However, I would like to both generalize this statement and prepare it for performance and security reasons. Thus, I used the following directives instead: DBDPrepareSQL "SELECT loginPassword FROM login WHERE loginUser = %s and loginRealm = %s" digestLogin AuthDBDUserRealmQuery digestLogin These directives generate the following errors: [...] [error] (20014)Internal error: DBD: failed to prepare SQL statements: [...] [error] (20014)Internal error: DBD: failed to initialise Why does my actual SQL statement work when used directly, but not when I try to prepare it? (Note I have tried using '?' and '%%' in place of '%', to no effect.)

    Read the article

  • Why are my 2 new windows 7 (64 bit) workstations taking over 10 minutes to log on to the SBS 2008 do

    - by Howie Hughes
    Hi, we have a SBS 2008 domain. On this we have windows XP clients. However, we are testing the windows 7 (64 bit) machines on the network. It takes between 10 & 15 minutes to log on - every time! I have checked the event logs on the client machine, and the only error I can see is; Event ID: 6005 The winlogon notification subscriber is took 615 seconds to handle the notification event (CreateSession). I have no warnings in the server event log, everything pings ok by name, so am guessing DNS is fine. Can someone please lend a hand with this, as we really want to go with windows 7. Lastly, both the server, and the windows 7 machines are fully patched and updated. Thank you.

    Read the article

  • Remove CGI from IIS7

    - by jekcom
    I ran some security scan and the scan said that all kind of CGI stuff are potential thread. This is part of the result : (ash) is present in the cgi-bin directory (bash) is present in the cgi-bin directory By exploiting this vulnerability, a malicious user may be able to execute arbitrary commands on a remote system. In some cases, the hacker may be able to gain root level access to the system, in which case the hacker might be able to cause copious damage to the system, or use the system as a jumping off point to target other systems on the network for intrusion and/or denial of service attacks. and many more related to cgi-bin directory. First I searched all the server for cgi-bin folder and it did not find any. Second I'm running my website on pure .NET and I don't use any scripts like php. Question is how can I remove this CGI thing from the IIS?

    Read the article

  • Project Server 2007 Task Updates hangs on 'Loading Grid...'

    - by Greg Buehler
    A strange problem began occurring after applying MOSS2 (KB953334) and the August 2009 cumulative update to our Project server. When a user enters the 'Task Update' screen they are prompted to download a new ActiveX control. Upon refresh, and subsequent access attempts, the user is presented with a blank grid with the caption 'Loading Grid...' We have attempted to fix this issue by updating the 'Trusted Sites' list and changing the security settings according to KB818046. However, nothing seems to definitely fix the problem. Also, when the problem randomly fixes itself, it still occurs when viewing specific projects. Any ideas on a fix?

    Read the article

  • A special user does not appear in Windows login screen

    - by shayan
    In the list of users (under Local Users and Groups in my Windows 7) I have an ASPNET user (its description says "Account used for running the ASP.NET worker process (aspnet_wp.exe)" and its full name is "ASP.NET Machine Account") The thing is this user does not appear in Windows login screen. What I have found: It is not a "Built-in security pricipal" user It belongs only to Users group I don't have HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts key in my registry In every sense I can see that it is a normal user yet it does not appear in login screen. Now the questions are: What does make it special? How can I create a user like this?

    Read the article

  • LINKED TABLES BETWEEN MS ACCESS 2003 AND MS ACCESS 2007-WRITE PERMISSIONS DENIED

    - by STEVE KING
    We are in the process of switching over to ACCESS 2007. We have numerous data tables in ACCESS 2003 files. In one case, the user has 2007 on his PC and opend the front end in 2007. No problems. When the the user is done, he clicks a button that executes a macro full of update queries. The macro reaches the first query and halts. We get a messge saying we do not have permisons to write to this linked table (2003 format). There were no security files involved. We re-linked from 2007, same problem. LAN permssions were ok. I wound up having to import the tables to front end in order for the user to be able to do his job.

    Read the article

  • TP-Link TL-WA701N not working good as wireless extender

    - by djechelon
    I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

    Read the article

  • software package disappeared in GPO after access rights change

    - by sirka
    Hi, in GPO, this item Computer > Software settings > Assigned applications > IE8_package was on Security tab set "Authenticated users" to "Deny". After that it disappeared from GPO, it is there, but nowhere shown. The intention was to disable installation of that package for now, yet having other packages in that GPO still installed. I know it was stupid decision now. Is there any way to display that package back? Please help.

    Read the article

  • Is this normal? Multiple httpd process

    - by ilcreatore
    I'm testing a new Server. This isnt really a peak time for my server (2pm), but still its running a bit slow, I was checking the ESTABLISHED connections using the following command: # netstat -ntu | grep :80 | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n http://i.stack.imgur.com/cZuvP.jpg My MaxClients are set to 50. So as you can see on the picture, only 10 people are eating most of my ram. I got a server with 4GB Ram (2.7GB free for apache) but each apache process is eating 53MB each, wich mean im only allowed to accept 50 process. The KeepAlive = Off, but I notice those connections arent closing fast enough, is that normal?

    Read the article

  • Realtek audio AC 97 5.1 on Windows 7: Terrible subwoofer quality

    - by Edu
    I have a media center PC with on-board Realtek AC97 Audio. I have been using Windows XP for a couple of years with great audio quality. I just upgraded this PC with Windows 7 and installed the latest Realtek drivers from http://www.realtek.com.tw/downloads/ At the testing screen, all the speakers works correctly (including subwoofer). Despite that, while playing any movie or music, the subwoofer quality is terrible. From it it just comes noises, in the correct rhythm but quite low and quite out of tone. I compensated the loudness by putting the other speakers lower but the sound of the subwoofer is really terrible. Is there anyone facing the same problem? Does anyone have a workaround for that? PS.: I had gone past the steps given in Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip but still I have a bad quality of sound. My problem is very similar to the one in http://www.mp3car.com/car-audio/143796-realtek-hd-audio-is-robbing-my-subwoofer.html

    Read the article

  • Installing google chrome on RHEL 5.3

    - by Xinus
    I am trying to install Google chrome on RHEL 5.3 but getting error as Missing Dependency: libnss3.so(NSS_3.12.3) is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) Missing Dependency: xdg-utils is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) Missing Dependency: lsb >= 3.2 is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) When try to install lsb package , I get output as [root@localhost softwares]# yum install redhat-lsb Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Parsing package install arguments Package redhat-lsb-3.1-12.3.EL.i386 installed and not available Nothing to do

    Read the article

  • Fresh Red Hat Enterprise Linux fails to install httpd using yum

    - by Julian
    I'm trying to install a LAMP stack in a fresh red hat server but yum is misbehaving. Being linux illiterate I'm at a loss. $yum install httpd Loaded plugins: security Setting up Install Process No package httpd available. Nothing to do My yum config $ cat /etc/yum.conf [main] cachedir=/var/cache/yum keepcache=0 debuglevel=2 logfile=/var/log/yum.log distroverpkg=redhat-release tolerant=1 exactarch=1 obsoletes=1 gpgcheck=1 plugins=1 # Note: yum-RHN-plugin doesn't honor this. metadata_expire=1h # Default. # installonly_limit = 3 # PUT YOUR REPOS HERE OR IN separate files named file.repo # in /etc/yum.repos.d Other stuff in the yum.repos.d dir $ ls -lah /etc/yum.repos.d/ total 12K drwxr-xr-x 2 root root 4.0K Feb 4 01:15 . drwxr-xr-x 59 root root 4.0K Feb 4 01:28 .. -rw-r--r-- 1 root root 561 Mar 10 2010 rhel-debuginfo.repo What could be going on? I thought "out of the box" RHEL5.5 would be friendlier :)

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >