Search Results

Search found 22267 results on 891 pages for 'org mode'.

Page 527/891 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• Can I copy from vim to another window without +xterm-clipboard?

  - by GorillaSandwich

  I'm using Ubuntu and vim. I can copy text from vim and paste it into another window by highlighting it in vim, then middle-clicking in the other window. This works fine when I'm on my local machine. I can also copy into the system register by highlighting text and yanking to the system register. (For example, Shift-V JJ "+ y to go into linewise visual mode, highlight two lines, select the '+' register and yank.) It's then available to paste into other windows. However, if I ssh into my web host, I can't do either of these. (They use some flavor of Linux - I think it's CentOS.) In vim, if I type :version, my local version shows +xterm_clipboard, but the host's version shows -xterm_clipboard. I don't have sudo rights there. Is there any way to be able to copy from their vim without getting them to tinker with the installation?

  Read the article

• When can an FTP server close its passive connections?

  - by Don Kirkby

  Does the FTP protocol allow the server to close any of its passive connections while the client is still connected? Can it tell when the client is finished receiving and then close the connection? I'm including an FTP server in my application using the pyftpdlib Python project. I've got it to work in active and passive mode, but I'm a bit concerned about when it closes its passive connections. I've tried connecting to it with both FileZilla and the default ftp command in Ubuntu, and in both cases, I get a new passive port for every request. That is, if I sit in the root folder and type ls 10 times, I use up 10 ports. This means that I have to allocate a big block of passive ports for the FTP server to use so it won't run out. As soon as the client disconnects, the server releases all the passive connections associated with that client and those ports can be reused. However, a long-running connection could use up a lot of ports.

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Exchange 2010 sending old Out of Office message

  - by Tatas

  We are just about done with our migration from Exchange 2003 to 2010. I have a user who has been migrated to the new system that is now out on medical leave. He has gone into OWA and set up his Out of Office notification. The good news is that an Out of Office message is sent, the bad news is that it appears to be sending an old outdated message from back when the user was on Exchange 2003, and not honoring the new message set up in OWA. The user has also tried setting this up in Outlook 2010 as well with the same behavior. I have a feeling that this is related to the old public folders (didn't they contain OOF messages?) still lingering around our Exchange org. Any ideas?

  Read the article

• Is it dangerous to add/remove a hard-drive to a Windows machine which is in stand by?

  - by Adal

  Can I add a SATA drive to a Windows 7 machine which is in standby mode? The hardware supports hot-plug. Could pulling the drive out while in standby corrupt the data on the drive (unflushed caches, ...)? Does Windows flush before standing by? How about swapping a drive with another drive of different kind (SSD - mechanical disk) and size, also while in stand-by. Could the OS when waking up believe that the old drive is still there, and write to it and thus corrupt it, since the new one has different partitions and data?

  Read the article

• Windows 7 Refuses To Install To A Partition

  - by PP

  I have 4 HDDs in my PC on a Gigabyte EP45-UD3 rev1.0 motherboard on SATA ports 0-3 and running AHCI mode. Windows 7 refuses to let me install to any partitions or disks I select saying Setup was unable to create a new system partition or locate an existing system partition. I will get to the bottom of this, after I sacrifice my Friday nights and weekends to Microsoft (they don't just want my money, they want my soul). Keep tuned, if no one has the answer, I will find one. I suspect I have to rip out 3 HDDs so that the n00bs at Microsoft can actually deal with spinning media. Really angers me how paid-for-products are so inferior to Linux they don't even qualify to be called "software".

  Read the article

• Network Block Device (NBD) clients for Windows or similar solutions

  - by przemoc

  Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

  Read the article

• Why are PNG-8 files mangled when opened in Photoshop?

  - by Daniel Beardsley

  Why are some 32 bit PNGs opened in Photoshop with Indexed Colors and no transparency? For instance, I grabbed a png icon file of the Stack Overflow logo at: http://blog.stackoverflow.com/wp-content/uploads/icon-so.png When opening it in Photoshop CS3, it apparently treats it as indexed color and gets rid of the alpha channel. The image on the right is a screen grab of the icon. Changing the Image mode in Photoshop to RGB doesn't change the image at all. I've tried this with a few other PNGs and it seems hit or miss. When viewed in other programs, it displays fine. left:png opened in Photoshop, right:screen grab of png from browser What gives?, does Photoshop not interpret the PNG file format correctly?

  Read the article

• Installing then Running VMware or VirtualBox causes my Windows 7 PC to not boot up after shutting down?

  - by Rick

  At my work I am provided with a Windows 7 PC but I am a programmer and Windows gives me problems for doing some types of development so I want to have a virtual Ubuntu Linux machine that I can use for some things. However, I have tried with both VirtualBox and VMware and I am able to install the latest Ubuntu and run it but then when I try to restart / start the computer after it was shut down, I am unable to boot into Windows normally and end up having to go into Safe mode and then use the system restore to get my system back up and working. I am puzzled by this and would appreciate if anyone has any idea why it would be doing this, I have searched on this but can't find anything. Thanks for any advice

  Read the article

• Is there an encrypted write-only file system for Linux?

  - by Grumbel

  I am searching for an encrypted file system for Linux that can be mounted in a write-only mode, by that I mean you should be able to write/append files, but not be able to read the files you have written. Access to the files should only be given when the filesystem is mounted via a password. The purpose of this is to write log files and such, without having the log files themselves be accessible. Does such a thing exist on Linux? Or if not, what would be the best alternative to create encrypted log files? My current workaround consists of simply piping the data through gpg --encrypt, which works, but is very cumbersome, as you can't get easy access to the file system as a whole, you have to pipe each file through gpg --decrypt manually.

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• Multiple connections to the same Wireless Network in Windows 7

  - by Jamek

  Hello, my university just limited bandwidth to 512 kbps (that's 64 kB/s!) for each connection. I was thinking to make multiple connection to the same wireless network (called "internet"), is this possible under Windows 7? I know it's possible to connect to more than one WLAN through the "hostednetwork" concept in netsh: netsh wlan set hostednetwork mode=allow ssid=xxxxx netsh wlan start hostednetwork However this method doesn't seem to work, I don't know if it's due to the authentication method (through certificates while hostednetwork seems to support just a "passphrase") or because I'm already connected to that network with the same MAC. Can you think to some tool able to do this?

  Read the article

• Mozilla Thunderbird 3.1.9 - not compatible with GMail conversation view addon?

  - by user69991

  A lot of time I already spent to find a suitable plugin (or addon) for mozilla thunderbird gmail conversation view. I found this : https://addons.mozilla.org/af/thunderbird/addon/gmail-conversation-view/ but it is just not compatible with my thunder bird version.. what I need to solve is: if one of my friends sends an email to me and another 10 friends. and everyone write a response. I can not read all in one mail (one by one). But I have to open 10 new emails. and is very hard to look over all. so can I have it like in Gmail? Do I have to install older version? is this possible and what are disadvantages? Thanks in advance.

  Read the article

• Windows 8 Secureboot: How do you bootup from another device such as cd/dvd drive or usb flash etc.?

  - by Victor T.

  On PC's and laptops running an older OS, this is just a simple matter of going into the BIOS and setting the boot sequence and putting the boot cd/dvd in the drive. In many cases you can even just hit one of the F* function keys to bring up the boot sequence menu on-the-fly during POST. The main problem I'm running into is that other devices besides the primary HD is disabled when SecureBoot is enabled. So far the only way I've gotten it to work is to disable SecureBoot and enable something called legacy mode. Needless to say this make it difficult to boot things like OS recovery tools, PartitionHD backups, Linux LiveCD's and a bunch of others. Is there another procedure for doing this since it seems to mess up the Windows 8 install? By mess up I mean that after re-enabling SecureBoot and starting Windows 8 normally, the OS goes into a 'preping repair phase' for some reason that takes forever to complete before getting into a usable desktop.

  Read the article

• Need to automount dvd or cdrom at fixed mount point in Ubuntu 11.04

  - by Lindsay Haisley

  Ubuntu 11.04, by default, automounts a cdrom or dvd at /media/<vol_name>. I need to make the automounting system use a fixed name instead of the volume name for all CDs or DVDs inserted into this particular drive, e.g. "/media/op-drive0". A bit of searching turns up pretty much the same solution I used, successfully, on an older, gentoo box, which is to create an fdi file for hal, along the lines of the instructions at https://bbs.archlinux.org/viewtopic.php?id=91450. This doesn't seem to work on this box. Other sources say to use the gnome-mount utility to set the mounting properties. Ubuntu 11.04 doesn't know about the gnome-mount program. Any ideas?

  Read the article

• remove apache tar binary package in centos

  - by user119720

  I need help in removing binary package that had been installed in my linux machine. The scenario that I am having are such as like this: I've already install latest apache that I get from its website(httpd.apache.org) through Unix binary package(tar.gz) After successfully install program,the apache server web perfectly without any issues. But then I having a thought,if there are another latest release version of apache in the future,then I need to make sure that i can upgrading current apache or reinstalling the new version apache. So my question is, how do I ensure that I have remove the old remove apache and all its dependencies so that it will not having conflict(probably) when installing the new apache. Right now the only thing that i can think of is to remove all the apache folder manually : rm -rf /apache2 Hope someone can shed some light about this.Thanks.

  Read the article

• Problem after installing node.js on Debian Lenny

  - by gmunk

  I managed to install node.js successfully on my machine but when invoking make test I get an error message: python tools/test.py --mode=release simple === release test-net-pingpong === Path: simple/test-net-pingpong server listening on 20989 localhost server listening on 20988 undefined Error: EAFNOSUPPORT, Address family not supported by protocol at net:1041:19 at dns:105:7 at EventEmitter._tickCallback (node.js:48:25) at node.js:176:9 I found out that EAFNOSUPPORT means that the OS does not support a particular protocol and a program tries to use it. So from what I can deduce my Debian does not have support for dns? Any help is appreciated!

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• How do I know if my Xeon Processor supports hardware virtualisation?

  - by gshankar

  I've been scouring the net (mainly the wikipaedia lists and intel's site. I even pulled out the datasheet for my processor) but I can't seem to answer this question. Does my Xeon support hardware virtualisation? The processor in question is a: "Nocona" (standard-voltage, 90 nm) 2800MHz. Other details can be found here: http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Nocona.22_.28standard-voltage.2C_90_nm.29 I'm pretty sure the answer is no as it's a pretty old server but I can't find a single place which has a definitive yes/no answer so I'm still looking...

  Read the article

• Case in-sensitivity for Apache httpd Location directive

  - by user57178

  I am working with a solution that requires the usage of mod_proxy_balancer and an application server that both ignores case and mixes different case combinations in URLs found in generated content. The configuration works, however I have now a new requirement that causes problems. I should be able to create a location directive (as per http://httpd.apache.org/docs/current/mod/core.html#location ) and have the URL-path interpret in case insensitive mode. This requirement comes from the need to add authentication directives to the location. As you might guess, users (or the application in question) changing one letter to capital circumvents the protection instantly. The httpd runs on Unix platform so every configuration directive is apparently case sensitive by default. Should the regular expressions in the Location directive work in this case? Could someone please show me an example of such configuration that should work? In case a regular expression can not be forced to work case insensitively, what part of httpd's source code should I go around modifying?

  Read the article

• How computers display raw, low-level text and graphics

  - by panic

  My ever-growing interest in computers is making me ask deeper questions, that we don't seem to have to ask anymore. Our computers, at boot, as far as I understand it, are in text mode, in which a character can be displayed using the software interrupt 0x10 when AH=0x0e. We've all seen the famous booting font that always looks the same, regardless of what computer is booting. So, how on earth do computers output graphics at the lowest level, say, below the OS? And also, surely graphics aren't outputted a pixel at a time using software interrupts, as that sounds very slow? Is there a standard that defines basic outputting of vertices, polygons, fonts, etc. (below OpenGL for example, which OpenGL might use)? What makes me ask is why OS' can often be fine without official drivers installed; how do they do that? Apologies if my assumptions are incorrect. I would be very grateful for elaboration on these topics!

  Read the article

• Ubuntu server 12.04.03 not checking disk partitions on reboot?

  - by jamesc

  My MOTD is showing: *** /dev/md2 will be checked for errors at next reboot *** *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** However, a standard sudo shutdown -r now does not appear to check the disks and the message remains. My guess is that the partitions 'should' be checked and that they are not being... so how can I get Ubuntu to check the partitions at reboot and keep things nice and safe? Update - this is the output of cat /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md/3 /home ext4 defaults 0 0 Update 2 - One message gone... Using @christianwolff's suggestions... sudo rm /var/lib/update-notifier/fsck-at-reboot sudo touch /forcefsck sudo shutdown -r now And now the motd is down to *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** So 'md2(ext4)' has been checked and the message updated.

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >