Search Results

Search found 17686 results on 708 pages for 'high level'.

Page 528/708 | < Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535  | Next Page >

• Dedicated server with a lot of storage and good support - and cost-effective

  - by Martin Burger

  Hello, I am from Germany and looking for a dedicated server located in the US with a lot of storage: 750 - 1500 GB. CPU speed and amount of memory are secondary, the server will host large amounts of media files via http and ftp - the basic task is to help people exchange media files. In Germany, there are some good offers, like "Root Server EQ6" at www.hetzner.de. For example, that company provides support of high quality, and their plans are very cost-effective. The plan mentioned above costs about $90 per month and provides two 1500 GB SATA-II HDDs (Software-RAID 1). In the US, I found (amongst others) Go Daddy and rackspace. Go Daddy offers some "Storage Monster" plans that include 2 x 1,000 GB hard drives for about $180 per month - already twice as much as Hetzner above. However, I found some blog and forum entries that complain about the support provided by Go Daddy. Rackspace seems to provide decent support, but they are very "upscale". Their dedicated servers are customizable and start at $419 - thus, about 4.5 times as much as Hetzner. Can anybody recommend a solution / plan that is comparable to the one by Hetzner? Or are prices for dedicated servers in general much higher than in Germany? Regards, Martin

  Read the article

• I/O APIC on Virtualbox

  - by RidDeBakTiYar

  I'm trying to use the PIT to do APIC timer calibration, and I want to use the PIT through I/O APIC instead of PIC. On Bochs I get interrupts from the PIT at the asked frequency from the I/O APIC, while on Virtualbox I can't receive a single interrupt. It must be an I/O APIC configuration problem because as I unmask the first PIC entry, the IRQ fires. However that's not what I want. Can you imagine any possible condition that wouldn't make Virtualbox fire the IRQ? I'm not assuming single I/O APIC configuration (even though Virtualbox has only 1). I'm not assuming identity mappings between ISA IRQs and I/O APIC GSIs (using ACPI MADT table to get I/O APIC base address and Int override). I'm setting the Trigger Mode and Polarity bits correctly (on Virtualbox they are set as '00 - default' which means edge high right?). I'm putting the BSP APIC ID into the Destination field (using Physical destination) and vector 0x20. Being the BSP APIC ID 0 on Virtualbox, it ends up with 0x0000000000000020 written to the IOREDTBL. And, just in case I'm getting the wrong values from the Interrupt Override descriptor, I'm setting this value to all the IOREDTBL entries (I know this is very very bad, and it wont be kept as I understand what's going on). The only thing I didn't check out is Local APIC configuration. Actually I'm not writing any value to the BSP LAPIC. Just reading the APIC ID and using it to boot APs through IPIs. And obviously I'm setting bit 11 in the IA32_APIC_BASE MSR to enable the LAPIC. Any ideas? Thanks in advance.

  Read the article

• Body of email breaks distribution list in exchange?

  - by widgisoft

  Hi, I have a very odd problem that I'm not sure is a programming issue or a server issue :-p. Basically I'm sending an email to an exchange distribution list that includes a PHP stack trace; during certain faults the trace includes really high level information such as the machine's environment variables (during file reads, etc.). I went through a copy of the email line by line until the email sent and it appears the line: [SUDO_COMMAND] => /etc/init.d/httpd restart is the culprit. Adding a string replacement in before the email is sent allows a successful send. What I don't understand is WHY these stream of characters are causing the issue ONLY on the distribution email. If I send the email to myself as well, i.e. "[email protected]; [email protected]", then I get the email fine. Re-ordering the list doesn't make a difference the group never gets the email. Because the individual gets the email and not the group I'm assuming the fault is with exchange and some rogue filtering - I've gone through it with the sysadmins and there's no filtering of any sort on that group... so maybe it's a bug? I can't find anyone else having recorded this specific fault so I figured I'd open it here. For now I'm just not using the distribution list but it'd be nice to eventually find the solution. Many thanks, Chris

  Read the article

• Why can't I install Java?

  - by Patrick

  I've been searching high and low for someone who can help me. I've been trying for a month. A month. to install Java on my new PC to no avail. No tech support forum can seem to help me. It all started while playing tekkit one day. I kept running out of memory (using the 32-bit JRE 7 u45) so I decided to install the 64-bit version. I uninstalled the 32-bit version first, for some reason, and downloaded the 64 bit runtime. In the installer, I go through all the normal screens until the installation progress bar appears. Then, it just sits there. No progress is made. No CPU is used by the installer, or any of its dependencies. The installer will stay like this for hours, days, and in one case a whole week without doing anything at all. I've tried installing older versions, the 32-bit version, even Java 6 and none of them will install. UAC is disabled, I've run regedit, CCleaner, and any other "fix-it" program there is. It's getting to the point where I may just have to wipe my hard drives and start over. I have several applications that require java, so this is an absolute necessity. Please, please, someone have the answer. Here are my system specs: -Intel i7-3770k -AsRock z77 Extreme3 -Samsung 840 pro SSD -WD Caviar Black 1tb

  Read the article

• Backup with Mercurial and Robocopy?

  - by Andrew Neely

  The Problem We would like to backup our critical files from several network shares to a removable hard drive. We want to automate the backup so we don't have to remember to run it. It needs to finish overnight. Furthermore, we want to be able to preserve multiple versions of each file so we can back out of our user's mistakes easier. Background Information I work in a large Windows-based enterprise with a centralized IT section who is responsible for all backups. Their backups are geared towards disaster recovery and not user error, and require upper-level management approval for any non-disaster recoveries. Several times we have noticed that our backups have failed, we weren't notified. I do not have administrative rights to the server or my desktop. We are trying to backup some 198,000 files spanning about 240 gigabytes. These files rarely change. Our backup drive is one terabyte. My Proposed Solution What I would like to do is to write a batch file using Robocopy with the /mir option along with Mercurial SCM to store all versions of the file. I would do an hg add followed by an hg commit before each execution of Robocopy to save the current state, and then make a mirrored copy of the file structures. The problem is the /mir will delete every folder not present in the source, and Mercurial stores the repository in a .hg folder in the destination folder. Does anybody know how I could either convince Mercurial to store the .hg folder elsewhere, or convince Robocopy not to delete it from the destination? I'm trying to avoid writing a custom program do to copying.

  Read the article

• java max heap size, how much is too much

  - by brad

  I'm having issues with a JRuby (rails) app running in tomcat. Occasionally page requests can take up to a minute to return (even though the rails logs processed the request in seconds so it's obviously a tomcat issue). I'm wondering what settings are optimal for the java heap size. I know there's no definitive answer, but I thought maybe someone could comment on my setup. I'm on a small EC2 instance which has 1.7g ram. I have the following JAVA_OPTS: -Xmx1536m -Xms256m -XX:MaxPermSize=256m -XX:+CMSClassUnloadingEnabled My first thought is that Xmx is too high. If I only have 1.7gb and I allocated 1.5gb to java, i feel like I'll get a lot of paging. Typically my java process shows (in top) 1.1g res memory and 2g virtual. I also read somewhere that setting the Xms and Xmx to the same size will help as it eliminates time spend on memory allocation. I'm not a java person but I've been tasked with figuring out this problem and I'm trying to find out where to start. Any tips are greatly appreciated!! update I've started analyzing the garbage collection dumps using -XX:+PrintGCDetails When i notice these occasional long load times, the gc logs go nuts. the last one I did (which took 25s to complete) I had gc log lines such as: 1720.267: [GC 1720.267: [DefNew: 27712K->16K(31104K), 0.0068020 secs] 281792K->254096K(444112K), 0.0069440 secs] 1720.294: [GC 1720.294: [DefNew: 27728K->0K(31104K), 0.0343340 secs] 281808K->254080K(444112K), 0.0344910 secs] about 300 of them on a single request!!! Now, I don't totally understand why it's always GC'ng from ~28m down to 0 over and over.

  Read the article

• Firebird database corruption causes

  - by Rytis

  I am running several different Firebird versions (2.0, 2.1) on multiple entry level Windows-based servers with wildly varying hardware. The only matching thing between them is that they are running same home built application with the same database structure. Lately I've been seeing massive slowdowns on multiple servers. Turns out that database gets corrupted, so each time it breaks, I get to mend, backup and restore the database, and it all is fine for some time (1-2 weeks), and then it repeats once again. Thankfully, I haven't seen any data loss or damage... yet. The thing is that every such downtime results in lost productivity, and often quite some driving for me as some of the databases are in remote locations. I've been trying to find out what's causing the corruption, but I haven't been able to. The fact that it's running on different hardware hints that it should not be a hardware based problem. If we rule out hardware issues, I have a bad feeling that it's a bug in Firebird as I'm not doing anything fancy via SQL. Do you have any idea how to find out exactly what's causing the corruption and hopefully fix the problem?

  Read the article

• LSI 9260-8i w/ 6 256gb SSDs - RAID 5, 6, 10, or bad idea overall?

  - by Michael Pearson

  We're provisioning a new production server for our reasonably busy website. Our choice of host have available a 6 drive configuration with a LSI 9260-8i card. My initial thought was to fill all six bays with SSDs (Intel 520 256gb) and set them up in RAID. Good, bad, or terrible idea? Can the card handle it? Should we be using RAID 5, 6 or 10? This would be the first time the provider have filled all six slots for this rackmount with SSDs, so they're a bit hesitant. I'm wondering if somebody else with this card has done something similar in a production environment. We do about 43gb of writes per day and currently use about 300gb of storage. The server acts as webserver, database, and image store for approx 1 million files. The plan is to underprovision the SSDs by approximately 10% to 20% to increase their overall lifespan & performance. The fallback option is 2x480gb SSDs in RAID 1 and another 2x1TB HDDs in RAID 1. The motivation behind this is that the server rental cost difference between 2xSSDs and 6xSSDs is minimal (compared to the overall cost of the rental). We do not have any special high-IOPs requirements. However, if the configuration is known to work, I don't see a good reason to not use it and not have to worry about having separate 'fast and small' and 'slow and large' disks.

  Read the article

• DansGuardian/Squid Traffic doesn't get back to user

  - by DKNUCKLES

  I've purchased a Squid appliance that I'm attempting to implement, however the lack of documentation has left me a bit high and dry. Forgive me if this is a silly question, but this is my first attempt at implementing Squid. From what I can ascertain from the documentation (or lack thereof), the users connect to DansGuardian first at port 8080 where the filtering is done, at which point it forwards it to the Squid appliance at port 3128. The traffic is then sent to the internet. The setup I have is as follows Gateway (MikroTik router) : 192.168.88.1 Squid/DansGuardian :192.168.88.100 Client : 192.168.88.238 Client --- Gateway --- Proxy --- Internet I have set up a simple NAT rule to forward all traffic from the client machine (for testing purposes) to go to the DansGuardian. The traffic seems to get there, although I see a lot of SYN_RECV w/ a netstat -antp command on the virtual appliance machine. From this I gather that the traffic is NOT being routed back to the client machine. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN - tcp 0 0 192.168.88.100:8080 192.168.88.238:55786 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55787 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55785 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55788 SYN_RECV - tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - Is this a routing issue or an issue with the Squid Appliance?

  Read the article

• 502: proxy: pass request body failed

  - by Andrei Serdeliuc

  Sometimes I get the following error (in apache's error.log) when viewing my site over https: (502)Unknown error 502: proxy: pass request body failed to xxx.xxx.xxx.xxx:443 I'm not entirely sure what this is and why it happens, it's also not consistent. The request route is: Browser Proxy server (apache with mod_proxy + mod_ssl) Load balancer (aws) Web server (apache with mod_ssl) The configuration on the proxy server is as follows: <VirtualHost *:443> ProxyRequests Off ProxyVia On ServerName www.xxx.co.uk ServerAlias xxx.co.uk <Directory proxy:*> Order deny,allow Allow from all </Directory> <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> ProxyPass / balancer://cluster:443/ lbmethod=byrequests ProxyPassReverse / balancer://cluster:443/ ProxyPreserveHost off SSLProxyEngine On SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.cert SSLCertificateKeyFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.key <Proxy balancer://cluster> BalancerMember https://xxx.eu-west-1.elb.amazonaws.com </Proxy> </VirtualHost> Any idea what the issue might be?

  Read the article

• SSL setup: UCC or wildcard certificates?

  - by quanza

  I've scoured the web for a clear and concise answer to my SSL question, but to no avail. So here goes: I have a web-service requiring SSL support for authentication pages. The root-level domain does not have the "www" - i.e., secure://domain.com - but localized pages use "language-code.domain.com", i.e. secure://ja.domain.com So I need at least a wildcard SSL certificate that supports secure://*.domain.com However, we also have a public sandbox environment at sandbox.domain.com, which we also need to support under localized domains - so secure://ja.sandbox.domain.com needs to also work. The previous admin managed to purchase a wildcard SSL certificate for .domain.com, but with a Subject Alternative Name for "domain.com". So, I'm thinking of trying to get a wildcard certificate with SANs defined as "domain.com" and ".*.domain.com". But now I'm getting confused because there seem to be separate SAN certificates, also called UCC certificates. Can someone clarify whether it's possible to get a wildcard certificate with additional SAN fields, and ultimately what the best way is to support: secure://domain.com secure://.domain.com secure://.*.domain.com with the fewest (and cheapest!) number of SSL certificates? Thanks!

  Read the article

• restoring a failed SBS 2000 box...

  - by Brad Pears

  Hi there, I read a post where you had mentioned you have had a PERC card blow up on you in an SBS box... I've got a similar situation where one of my RAID drives failed and then the power supply failed before I could replace the drive... I then replaced the power supply and the failed drive and reconfigured the RAID array. I had a recent full backup of the my Win2k SBS's C: drive stored on my SYmantec backup exec server so I installed win2K server on the c: partition and then once I had that up and running, installed the backup exec agent so as to do a restore of the entire c drive including system state. THis all worked just fine, until I had to reboot. I received an "incorrect drive configuration" error and then it hangs. I figure that likely makes sense becasue I think my RAID array is configured slightly different now in that the partitions may be sizeded ever so slightly differently now than they were before I think... Is there a way I can just restore from my backup BUT maybe exclude some of the registry and hidden boot files it wants to restore so that it is booting with the current configuration now active on that machine - not the pre blow up configuration files? I also read a post that indicated you might have to install the exact same service pack etc... etc.. before attemting a restore but that does not make sense to me being as the entire c drive contents are going to be overwritten by the restore anyway? THe basic OS install is just to be able to get the backup exec agent installed . I can;t understand why one would need to install the exact same SP level. CAn you shed some light on what I might be able to do to get this thing up and running? Thanks,Brad

  Read the article

• nginx connection pool race condition?

  - by wlf

  I have a shared hosting server with high traffic. I have a lightweight apache mod_proxy for static content that from time to time has a "504 proxy error" problem proxing to apache/mod_php. Error log says: error reading status line from remote server 127.0.0.1:8080 Error reading from remote server returned by / This is what the apache documentation says about it. proxy-initial-not-pooled If this variable is set no pooled connection will be reused if the client connection is an initial connection. This avoids the "proxy: error reading status line from remote server" error message caused by the race condition that the backend server closed the pooled connection after the connection check by the proxy and before data sent by the proxy reached the backend. It has to be kept in mind that setting this variable downgrades performance, especially with HTTP/1.0 clients. I am really concerned about this downgrade in performance therefore I started to look at nginx immediately. I am new to nginx and time is crucial right now, I can't afford to waste days to study it just to find out there is the same race condition issue. Is nginx affected by this connection pool race condition? Thanks

  Read the article

• Windows 7 network performance tuning for LAN

  - by Hubert Kario

  I want to tune Windows 7 TCP stack for speed in a LAN environment. Bit of background info: I've got a Citrix XenServer set up with Windows 2008R2, Windows 7 and Debian Lenny with Citrix kernel, Windows machines have Tools installed the iperf server process is running on different host, also Debian Lenny. The servers are otherwise idle, tests were repeated few times to confirm results. While testing with iperf 2008R2 can achieve around 600-700Mbps with no tuning what so ever but I can't find any guide or set of parameters that will make Windows 7 achieve anything over 150Mbps with no change in TCP window size using -w parameter to iperf. I tried using netsh autotuining to disabled, experimental, normal and highlyrestricted - no change. Changing congestionprovider doesn't do anything, just as rss and chimney. Setting all the available settings to same values as on Windows 2008R2 host doesn't help. To summarize: Windows 2008R2 default settings: 600-700Mbps Debian, default settings: 600Mbps Windows 7 default settings: 120Mbps Windows 7 default, iperf -w 65536: 400-500Mbps While the missing 400Mbps in performance I blame on crappy Realtek NIC in the XenServer host (I can do ~980Mbps from my laptop to the iperf server) it doesn't explain why Windows 7 can't achieve good performance without manually tuning window size at the application level. So, how to tune Windows 7?

  Read the article

• Java Swing over Remote Desktop - Strange, weird GUI squashing

  - by ADTC

  I thought this question fits SuperUser more than StackOverflow because it's not about actual Java programming, though programmers might be more likely to encounter the problem. Anyway, let me start of with some stats before I ask the actual question: Laptop: Windows 7 x32 Screen resolution 1024 x 768; Nvidia GeForce Go 6200 Connected to desktop via ad-hoc wireless network Access internet via desktop Desktop: Windows 7 x64 Screen resolution 1920 x 1080 Connected to laptop via ad-hoc wireless network Access internet via cable modem I'm connecting to my laptop via Remote Desktop from my desktop to take advantage of the large screen. I'm doing programming on my laptop (for portability reasons). Everything else runs smooth and fast over Remote Desktop as both computers are connected directly over the ad-hoc wireless. The only problem is this: Java Swing apps don't display the GUI properly. I acquired a Java Swing application and I'm debugging it in Eclipse. Here's what I got when I ran the app: Apparently there doesn't seem to be anything wrong with the GUI application I'm debugging, because the Java Control Panel exhibits the same problem. I've searched high and low in Google about this; the closest I came to a solution is this. But sadly, the use of -Dsun.java2d.nodraw=true has no effect at all. This only happens over Remote Desktop. I have tried locally and the GUI apps display properly. This isn't a dealbreaker for me as I can stop using Remote Desktop when developing Java Swing apps. However, I would like to know if anyone has encountered this and found any solution. PS: All software involved (Eclipse, Java JRE, etc.) are latest versions.

  Read the article

• Slow performance on VMWare Linux server after Tomcat install

  - by Loftx

  We have a VMWare ESXi 4.1 server hosting a number of Linux and Windows guests. Recently a new Linux guest was added to this server and seemed to be performing well. Tomcat and some other applications on this server were then installed which seem to have caused the server to run really slowly without any obvious resource issues. Slow performance include: The time taken to bring up the password prompt over ssh takes a few seconds when it was previously instantaneous. The time taken to unzip a zip file which was previously a few seconds now takes around 30 seconds The time taken to compile vmware tools has increased by similar factors Both the VMWare console and monitoring commands don't report any issues with high CPU or memory usage but something is obviously slowing the server down somehow. Does anyone have any ideas what may be causing this issue and how it can be resolved? Thanks, Tom Edit As per your questions I’ve looked at some of the performance indicators on both the VM host and VM guest indicated. Firstly I tried reserving the full amount of memory (3gb) for this VM – no other machines on this server have any memory reservation. The swap in rate and swap out rate for the VM host and guest are now both zero. Balloon memory on the guest is zero and on the host is 3.5gb (total memory on the host is 12gb) The swap rate for the guest is also zero. Swap used by the host is 200mb on average. Compression and decompression rates for the host and guest are zero. Command aborts for the host are zero. Read latency is very low – maximum 10ms average 0.8ms. Write latency is higher – a few spikes to 170ms but mostly around 25ms – is this bad? Queue command latency is zero . Physical disk read latency averages 5ms but often 10ms Physical disk write latency averages 15ms but is often 20ms I hope this helps - let me know if you need any more information.

  Read the article

• File download speed issue over a dedicated fibre link

  - by nixnotwin

  My ISP has installed a fibre based dedicated internet connection at the place where I work. In the beginning the connection terminated at one of the ISP's core routers. It resulted in a strange issue. Eventhough the assigned speed was 5mbps, when tests were done by downloading large files over http and ftp from multiple locations, the speed never went above 2mbps. But bittorrent downloads reached 5mbps. Even file download from the ISP servers were fine. So, at the ISP our link was attached directly to their edge router. After this file downloads from high bandwidth servers, like Google and MS, reached the 5 mbps limit. Sometimes the speed would fall down below 2 mbps and suddenly it will go up to the 5 mbps limit ( it keeps on happening during any single file download). But other downloads like ubuntu apt repositories still struggle to go above 2 mbps. The engineers at the ISP have not been able to sort out the issue. After they moved us to their edge router instead of giving us 8 public ip's, they just gave 4 ip's. When we enquired about it, they told us that giving more ip's would result in arp overload at their edge router. But somehow I was able to convince them to give us the 8 ip's which we wanted. But the file download issue has remained. What might be the reason for files from different location getting downloaded with different speeds, that too with heavy fluctuation in speeds? I have downloaded files from same url's from a connection belonging to another smaller ISP, and the speeds were fine and reached full 5 mbps limit.

  Read the article

• SQL Server 2008 R2 mirroring failing

  - by andriusn

  I have two Windows 2008 R2 (Amazon EC2) instances running SQL Server 2008 R2. I use 9TB striped disks (9x1TB EBS volumes) for storage. One server is running as principal and second one as mirror. Both started from the same image, database and tlog files located on striped disk. Mirror server failed 3 times in last 2 months with errors: EventID 823 The operating system returned error 2(The system cannot find the file specified.) to SQL Server during a write at offset 0x00000048058a00 in file 'D:\TLogs***_log.ldf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. and EventID 1454 Database mirroring will be suspended. Server instance 'xxxxxxxxxx' encountered error 823, state 6, severity 24 when it was acting as a mirroring partner for database '***'. The database mirroring partners might try to recover automatically from the error and resume the mirroring session. For more information, view the error log for additional error messages. followed by EventID 19019 The MSSQLSERVER service terminated unexpectedly. After this rebooting instance is necessary to restore mirroring. First two times I thought it was hardware related (striped disk failure) and relaunched instance on new hardware. But the issue is back after few weeks again. It only affects mirror instances. Any help would be really appreciated. Thanks.

  Read the article

• Current wisdom on SQL Server and Hyperthreading?

  - by BradC

  Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

  Read the article

• Which Linux distribution for vehicle LCD instrument panel

  - by Brent

  I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

  Read the article

• Extract archive here, autodetect subfolder

  - by lorancou

  I use 7-Zip under Windows 7 to extract all kind of archives. The ever-running problem is that there is not a single way to handle subfolders. Some people create their archives like this (let's call it type A): . +-- subfolder ¦   +-- file 1 ¦   +-- file 2 ¦   +-- ... "Extract Here" will extract everything to subfolder/, which is fine; "Extract to <Folder>" will create an extra subfolder level, which is annoying. And other people create them like that (let's call it type B): . +-- file1 +-- file 2 +-- ... "Extract Here" will populate the current folder, which can bring a lot of mess if this folder already contains tons of other files, and which is very annoying; "Extract to <Folder>" will create a subfolder and conveniently stuff it with the archive content, which is fine. So this leaves two options: always choose to "Extract to <Folder>" and live with the extra subfolder for type A archives. Or open the archive before extracting it to check if this is a type A or B, and then appropriately select "Extract Here" or "Extract to <Folder>". I usually do the latter, but I just discovered that KDE is offering a very handy Extract Archive Here, Autodetect Subfolder feature that automates that. It'll "Extract Here" if there's only one subfolder in the archive, otherwise it'll "Extract to <Folder>". I love this idea. Is there a Windows 7 tool offering this option? Preferably integrated in the explorer context menu? Maybe it's hidden somewhere in 7-Zip and I just didn't find it?

  Read the article

• How to set the VirtualDocumentRoot based on the files within

  - by Chuck Vose

  I'm trying to set up Apache to use the VirtualDocumentRoot directive but my sites aren't all exactly the same. Most of the sites have a drupal folder which should be the root but there are a few really old drupal sites, a few rails sites, some django sites, etc. that want the Document root to be / or some other folder. Is there a way to set up VirtualDocumentRoot based on a conditional or is there a way to use RewriteRule/Cond to detect that / is the incorrect folder if there is a drupal folder or a public folder? Here's what I have so far: <VirtualHost *:80> # Wildcard ServerAlias, this is the default vhost if no specific vhost matches first. ServerAlias *.unicorn.devserver.com # Automatic ServerName, based on the HTTP_HOST header. UseCanonicalName Off # Automatic DocumentRoot. This uses the 4th level domain name as the document root, # for example http://bar.foo.baz.com/ would respond with /Users/vosechu/Sites/bar/drupal. VirtualDocumentRoot /Users/vosechu/Sites/%-4/drupal </VirtualHost> Thanks in advance! -Chuck

  Read the article

• How to let MSN or Yahoo Messenger set you to be Invisible or Offline when you are idle for an hour?

  - by Jian Lin

  The short question is: How do we let MSN or Yahoo Messenger set us to be Invisible or Offline when we are idle for half an hour or an hour? The reason is: if I am on 24 hours a day, some people see me as weird. Some people see my value as low, because I am always there. There are ways to set me to "Away" or "Busy" after 10 minutes, but there seems to be no way to set myself to invisible or offline after 1 hour. As I am a software developer, I am very used to turning the computer on 24 hours a day. (for example, for checking email for urgent fixes, and fix issue and push to web server). We don't turn off computer usually even when we sleep, because we may sometimes can't sleep yet and come check on the computer, or wake up in the morning and immediately need to check if everything is ok. But, my MSN and Yahoo Messenger is always on for 24 hours a day, and I found that some girls start to ask me why I am always there 24 hours a day (even though they see me as away or busy, their feeling is that I am always there). What's more, I found that since I am always there, my value actually drop in their eyes, because hard to get = high value, and always there = low value. Some people feel me as having nothing much to do, always in front of computer, or what is he doing in front of computer so much? Now since it is my job, and I need to read emails once in a while, I am in fact in front of the computer more than some other people. I am in front of the computer maybe 10 hours a day, far from 24 hours a day. Is there an easy and automatic solution to this?

  Read the article

• A tiered approach to cloning linux partitons

  - by Djurdjura

  I'm looking at a strategy for cloning Linux (root) partitions without having to use a Live CD. Literature suggests rightly that the source and target partitions must be umounted to be able to get a clean clone. This assumes that you need to use a LiveCD. I was wondering if instead of requiring a LiveCD, if using a 3rd partition that would emulate the LiveCD functionality, if we can't achieve the same functionality. In other words, at a high level a system with 3 partitions (all bootable): Rescue Partition (LiveCD emulation) Running Partition (Source) Backup Partition (Destination) All 3 partitions are LVMS. When it's time to clone the source partition to the backup (destination) partition, we would boot to the rescue partition, unmount the other 2 partitions (is it required?), run disk check on the source, copy to the destination (dd or simple copy to avoid replicating the defragmentation from the source), run disk check on the destination partition, update Grub menu list to force boot from either partition, and reboot into that partition. My question, is it an approach that you'd recommend? MBR in all this? Any gotchas or extra checks required? Thanks, D. PS. On recommendation from members, posting here instead of stackoverflow.com.

  Read the article

• Should one have a separate user account for work use? [closed]

  - by Tyler Wayne

  This question examines the practice of using a separate OS-level user account to divide work use from personal use (specifically, in a creative profession and on a personal computer). I recently left my in-the-flesh job to go to school, but I'm carrying on with the work remotely. I do all of my work on my laptop, and I currently have a separate user account called "Work" where I do exactly that. However, I'm now starting to question that practice. Because my hobby is the same as my job, I want to save notes of the things I learn while working. Because ideas come at any moment, I often want to throw something into my personal task manager's inbox and look at it again later. That task manager is well-suited to handle both the work and personal aspects of my life. Only my personal account has admin rights, but work sometimes requires me to install programs. My employer has no preference regarding my choice, so that is a non-issue. My work is essentially freelance web development, so advice given with that in mind will be much appreciated. Back up all opinion with some personal experience, please. Ideally, give a list of pros and cons and then name reasons for your position.

  Read the article

< Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535  | Next Page >