Search Results

Search found 21089 results on 844 pages for 'virtual memory'.

Page 529/844 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• LSI 9211-8i won't boot in KVM

  - by Paul McMillan

  I'm running ubuntu 11.04 with an LSI 9211-8i in IT mode with the latest firmware (10). I'm using KVM with VT-d enabled to pass the entire PCIe device through to the guest OS. I have the device disabled in the system BIOS. When I boot my virtual machine, the adapter quits during bios initialization with the following error: Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 0Ch encountered at adapter PCI(00h,04h,00h) Press any key to continue... I know the virtualization is correctly enabled. I've blacklisted the kernel modules in the host OS. Has anyone else encountered this error? I'm about out of ideas here. Edit: I contacted LSI tech support about this, and they suggested that I try RedHat and Xen. Apparently they don't test or support anything else.

  Read the article

• Can't create VM with virt-install on Debian wheezy

  - by chrismacp

  Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

  Read the article

• Cannot connect to Xen domU via VNC if X isn't installed on domU

  - by Hai Minh Nguyen

  I'm trying to build a Xen domU that can be connected through the Xen's VNC server. Below is the template (actually it's generated by OpenNebula): name = 'one-153' #O CPU_CREDITS = 256 memory = '128' bootloader = "/usr/bin/pygrub" disk = ['tap:aio:/home/oneadmin/cloud/one/var/153/images/disk.0,xvda,w',] vif = ['mac=02:00:c0:a8:00:03,bridge=virbr0',] vfb = ['type=vnc,vnclisten=slave1,vncdisplay=1,vncpasswd=v98KXdFN'] The problem is that I can't connect to the domU if it doesn't have X. In this case all I got is a blank screen. Besides, if the domU has X, the screen is still blank until the login prompt appears, while it should be like this. Some information that may be useful: The domU and the dom0 both run CentOS 5.5. If the domU has X, it can be connected even when both X and the domU's VNC server isn't running. The VNC client is RealVNC.

  Read the article

• Cannot create Java VM on OpenVZ

  - by Stephen Searles

  I'm constantly encountering an error related to Java and certificates on my Ubuntu server running in OpenVZ when installing things from apt-get. I'm pretty sure it has to do with how Java allocates memory. I know the fail counter for privvmpages is very high, so the problem must be that Java is hitting this limit. I have read that the server VM will allocate a lot of memory up front to preempt performance issues, but that the client VM doesn't do this and might be better for what I'm doing. I messed with jvm.cfg to make the system go to the client VM, but get an error that it can't find the client VM. I have tried replacing the Java binary with a script calling Java with -Xms and -Xmx settings, and that solves the issue for when I call basic things from the command line, but not for when doing things like having apt-get configure certificates. I'm at a loss for what to try next. I need to get this working, but simply increasing privvmpages is not an available option. I have the actual error pasted below. Setting up ca-certificates-java (20100412) ... creating /etc/ssl/certs/java/cacerts... Could not create the Java virtual machine. error adding brasil.gov.br/brasil.gov.br.crt error adding cacert.org/cacert.org.crt error adding debconf.org/ca.crt error adding gouv.fr/cert_igca_dsa.crt error adding gouv.fr/cert_igca_rsa.crt error adding mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt error adding mozilla/AddTrust_External_Root.crt error adding mozilla/AddTrust_Low-Value_Services_Root.crt error adding mozilla/AddTrust_Public_Services_Root.crt error adding mozilla/AddTrust_Qualified_Certificates_Root.crt error adding mozilla/America_Online_Root_Certification_Authority_1.crt error adding mozilla/America_Online_Root_Certification_Authority_2.crt error adding mozilla/Baltimore_CyberTrust_Root.crt error adding mozilla/COMODO_Certification_Authority.crt error adding mozilla/COMODO_ECC_Certification_Authority.crt error adding mozilla/Camerfirma_Chambers_of_Commerce_Root.crt error adding mozilla/Camerfirma_Global_Chambersign_Root.crt error adding mozilla/Certplus_Class_2_Primary_CA.crt error adding mozilla/Certum_Root_CA.crt error adding mozilla/Comodo_AAA_Services_root.crt error adding mozilla/Comodo_Secure_Services_root.crt error adding mozilla/Comodo_Trusted_Services_root.crt error adding mozilla/DST_ACES_CA_X6.crt error adding mozilla/DST_Root_CA_X3.crt error adding mozilla/DigiCert_Assured_ID_Root_CA.crt error adding mozilla/DigiCert_Global_Root_CA.crt error adding mozilla/DigiCert_High_Assurance_EV_Root_CA.crt Could not create the Java virtual machine. error adding mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt error adding mozilla/Entrust.net_Global_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Global_Secure_Server_CA.crt error adding mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt error adding mozilla/Entrust.net_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Secure_Server_CA.crt error adding mozilla/Entrust_Root_Certification_Authority.crt error adding mozilla/Equifax_Secure_CA.crt error adding mozilla/Equifax_Secure_Global_eBusiness_CA.crt error adding mozilla/Equifax_Secure_eBusiness_CA_1.crt error adding mozilla/Equifax_Secure_eBusiness_CA_2.crt error adding mozilla/Firmaprofesional_Root_CA.crt error adding mozilla/GTE_CyberTrust_Global_Root.crt error adding mozilla/GTE_CyberTrust_Root_CA.crt error adding mozilla/GeoTrust_Global_CA.crt error adding mozilla/GeoTrust_Global_CA_2.crt error adding mozilla/GeoTrust_Primary_Certification_Authority.crt error adding mozilla/GeoTrust_Universal_CA.crt error adding mozilla/GeoTrust_Universal_CA_2.crt error adding mozilla/GlobalSign_Root_CA.crt error adding mozilla/GlobalSign_Root_CA_-_R2.crt error adding mozilla/Go_Daddy_Class_2_CA.crt error adding mozilla/IPS_CLASE1_root.crt error adding mozilla/IPS_CLASE3_root.crt error adding mozilla/IPS_CLASEA1_root.crt error adding mozilla/IPS_CLASEA3_root.crt error adding mozilla/IPS_Chained_CAs_root.crt error adding mozilla/IPS_Servidores_root.crt error adding mozilla/IPS_Timestamping_root.crt error adding mozilla/NetLock_Business_=Class_B=_Root.crt error adding mozilla/NetLock_Express_=Class_C=_Root.crt error adding mozilla/NetLock_Notary_=Class_A=_Root.crt error adding mozilla/NetLock_Qualified_=Class_QA=_Root.crt error adding mozilla/Network_Solutions_Certificate_Authority.crt error adding mozilla/QuoVadis_Root_CA.crt error adding mozilla/QuoVadis_Root_CA_2.crt error adding mozilla/QuoVadis_Root_CA_3.crt error adding mozilla/RSA_Root_Certificate_1.crt error adding mozilla/RSA_Security_1024_v3.crt error adding mozilla/RSA_Security_2048_v3.crt error adding mozilla/SecureTrust_CA.crt error adding mozilla/Secure_Global_CA.crt error adding mozilla/Security_Communication_Root_CA.crt error adding mozilla/Sonera_Class_1_Root_CA.crt error adding mozilla/Sonera_Class_2_Root_CA.crt error adding mozilla/Staat_der_Nederlanden_Root_CA.crt error adding mozilla/Starfield_Class_2_CA.crt error adding mozilla/StartCom_Certification_Authority.crt error adding mozilla/StartCom_Ltd..crt error adding mozilla/SwissSign_Gold_CA_-_G2.crt error adding mozilla/SwissSign_Platinum_CA_-_G2.crt error adding mozilla/SwissSign_Silver_CA_-_G2.crt error adding mozilla/Swisscom_Root_CA_1.crt error adding mozilla/TC_TrustCenter__Germany__Class_2_CA.crt error adding mozilla/TC_TrustCenter__Germany__Class_3_CA.crt error adding mozilla/TDC_Internet_Root_CA.crt error adding mozilla/TDC_OCES_Root_CA.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt error adding mozilla/Taiwan_GRCA.crt error adding mozilla/Thawte_Personal_Basic_CA.crt error adding mozilla/Thawte_Personal_Freemail_CA.crt error adding mozilla/Thawte_Personal_Premium_CA.crt error adding mozilla/Thawte_Premium_Server_CA.crt error adding mozilla/Thawte_Server_CA.crt error adding mozilla/Thawte_Time_Stamping_CA.crt error adding mozilla/UTN-USER_First-Network_Applications.crt error adding mozilla/UTN_DATACorp_SGC_Root_CA.crt error adding mozilla/UTN_USERFirst_Email_Root_CA.crt error adding mozilla/UTN_USERFirst_Hardware_Root_CA.crt error adding mozilla/ValiCert_Class_1_VA.crt error adding mozilla/ValiCert_Class_2_VA.crt error adding mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_RSA_Secure_Server_CA.crt error adding mozilla/Verisign_Time_Stamping_Authority_CA.crt error adding mozilla/Visa_International_Global_Root_2.crt error adding mozilla/Visa_eCommerce_Root.crt error adding mozilla/WellsSecure_Public_Root_Certificate_Authority.crt error adding mozilla/Wells_Fargo_Root_CA.crt error adding mozilla/XRamp_Global_CA_Root.crt error adding mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt error adding mozilla/beTRUSTed_Root_CA.crt error adding mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt error adding mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt error adding mozilla/thawte_Primary_Root_CA.crt error adding signet.pl/signet_ca1_pem.crt error adding signet.pl/signet_ca2_pem.crt error adding signet.pl/signet_ca3_pem.crt error adding signet.pl/signet_ocspklasa2_pem.crt error adding signet.pl/signet_ocspklasa3_pem.crt error adding signet.pl/signet_pca2_pem.crt error adding signet.pl/signet_pca3_pem.crt error adding signet.pl/signet_rootca_pem.crt error adding signet.pl/signet_tsa1_pem.crt error adding spi-inc.org/spi-ca-2003.crt error adding spi-inc.org/spi-cacert-2008.crt error adding telesec.de/deutsche-telekom-root-ca-2.crt failed (VM used: java-6-openjdk). dpkg: error processing ca-certificates-java (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ca-certificates-java E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• IIS7 url rewrite rules

  - by sympatric greg

  In a hosted environment, I will be utilizing subdomains (and virtual directories) for various coding projects. I have a rewrite rule that changes 'subdomain.domain.com/url' to 'domain.com/subdomain/url'. This worked fine, except that the browser couldn't find resources with paths generated by ResolveURL("~/something"). The server was using the Application Path of "/subdomain/" so based on the rewrite rule, the browser's request for "/subdomain/something" was being looked for in "/subdomain/subdomain/something" were it wasn't to be found. either of these urls were valid: http://www.domain.com/subdomain/something http://subdomain.domain.com/something I resolved this by adding a another url rewrite rule to the subdomain: <rule name="RemoveSuperDir"> <match url="subdomain/(.*)" /> <action type="Rewrite" url="{R:1}" /> </rule> So for each subdomain that I might add, I will need to add such a rule. Is there a way to write a single rule at the domain level to resolve this issue?

  Read the article

• MOSS Upload Size?

  - by littlegeek

  Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

  Read the article

• Can't start httpd 2.4.9 with self-signed SSL certificate

  - by Smollet

  I cannot start the httpd 2.4.9 (tried 2.4.x too) on CentOS 6.5 with the simplest SSL config possible. The openssl version installed on the machine is OpenSSL 1.0.1e-fips 11 Feb 2013 (I've upgraded it using 'yum update' to the latest patched version as well) I have compiled and installed the httpd 2.4.9 using the following commands: ./configure --enable-ssl --with-ssl=/usr/local/ssl/ --enable-proxy=shared --enable-proxy_wstunnel=shared --with-apr=apr-1.5.1/ --with-apr-util=apr-util-1.5.3/ make make install Now I'm generating the default self-signed certificate as described in the CentOS HowTo: openssl genrsa -out ca.key 2048 openssl req -new -key ca.key -out ca.csr openssl x509 -req -days 365 -in ca.csr -signkey ca.key -out ca.crt cp ca.crt /etc/pki/tls/certs cp ca.key /etc/pki/tls/private/ca.key cp ca.csr /etc/pki/tls/private/ca.csr Here is my httpd-ssl.conf file: Listen 443 SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 SSLPassPhraseDialog builtin SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" SSLSessionCacheTimeout 300 <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "/usr/local/apache2/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch "MSIE [2-5]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 CustomLog "/usr/local/apache2/logs/ssl_request_log" \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> when I start httpd using bin/apachectl -k start I get following errors in the error_log: Wed Jun 04 00:29:27.995654 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:29:27.995726 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.995863 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996111 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:29:27.996122 2014] [ssl:info] [pid 24021:tid 139640404293376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:29:27.996209 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.996280 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996295 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:29:27.996303 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: DH PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996308 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: EC PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996318 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:29:27.996321 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I then try to generate missing DH PARAMETERS and EC PARAMETERS: openssl dhparam -outform PEM -out dhparam.pem 2048 openssl ecparam -out ec_param.pem -name prime256v1 cat dhparam.pem ec_param.pem >> /etc/pki/tls/certs/ca.crt And it mitigates the error but the next comes out: [Wed Jun 04 00:34:05.021438 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:34:05.021487 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.021874 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022050 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:34:05.022066 2014] [ssl:info] [pid 24089:tid 140719371077376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:34:05.022285 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1016): AH02540: Custom DH parameters (2048 bits) for 192.168.9.128:443 loaded from /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022389 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1030): AH02541: ECDH curve prime256v1 for 192.168.9.128:443 specified in /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022397 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.022464 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022478 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:34:05.022488 2014] [ssl:emerg] [pid 24089:tid 140719371077376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:34:05.022491 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I have tried to generate the simple certificate/key pair exactly as described in the httpd docs Unfortunately, I still get exact same errors as above. I've seen a bug report with the similar issue: https://issues.apache.org/bugzilla/show_bug.cgi?id=56410 But the openssl version I have is reported as working there. I've also tried to apply the patch from the report as well as build the latest 2.4.x branch with no success, I get the same errors as above. I have also tried to create a short chain of certificates and set the root CA certificate using SSLCertificateChainFile directive. That didn't help either, I get exact same errors as above. I'm not interested in setting up hardened security, etc. The only thing I need is to start httpd with the simplest SSL config possible to continue testing proxy config for the mod_proxy_wstunnel Had anybody encountered and solved this issue? Is my sequence for creating a self-signed certificate incorrect? I'd appreciate any help very much!

  Read the article

• Unable to access VLAN host from VLAN interface in CentOS

  - by Amrit

  I am playing with VLAN (Virtual LAN) configuration on CentOS 6.4. I have 2 interfaces, eth0 and eth1. I have configured 2 VLAN interfaces eth0.20 and eth0.30 as #file: ifcfg-eth0.20 #------------- VLAN=yes DEVICE=eth0.20 TYPE=Ethernet ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=static IPADDR=192.168.20.1 GATEWAY=192.168.20.1 NETMASK=255.255.255.0 USERCTL=no #file: ifcfg-eth0.30 #------------- VLAN=yes DEVICE=eth0.30 TYPE=Ethernet ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=static IPADDR=192.168.30.1 GATEWAY=192.168.30.1 NETMASK=255.255.255.0 USERCTL=no Then connected a desktop to interface eth0 port using LAN cable and assigned 192.168.30.2/24 IP. When I try to ping 192.168.30.1 from 192.168.30.2 machine, It shows destination host unreachable. I am also not able to ping 192.168.130.2 from 192.168.30.1. However ping -I eth0 192.168.30.2 works fine. Any pointers?

  Read the article

• Most efficient way to connect an ISAPI Dll to a windows service

  - by Mike Trader

  I am writing a custom server for a client. They want scalability so I must use a thread pool and probably I/O completion port to regulate it. The main requirement is that a windows service manage the HTTP requests for a number of reasons. An example of one would be that a client session spans many requests and continuity must be maintained. Another would be that the ISAPI Dll will be in the IIS address space and so it's code will be lean and very carefully implemented. The extensive processing in the Windows service may get unruly for the duration of the lengthy development. If the service crashes it will not take out IIS. Anyway, the remaining decision is how to have these two processes communicate. We have talked about pipes, tcp, global memory and even a single pipe with multiplexed data ala FastCGI. Would love to hear anyones experience with a decision like this.

  Read the article

• Ubuntu ATI second display as main display

  - by Josh

  how can i make my external second display as main display for ubuntu? Im using the ATI Control Center (amdcccle) Seems there is no way to make this switch under the GUI Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LCD" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1366x768" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-LCD" "0-LCD" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:1:5:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-LCD" "0-LCD" BusID "PCI:1:5:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3046 3046 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Dell OpenManage Causing Periodic Slowness

  - by Zorlack

  Today we diagnosed the cause of a Periodic slowness issue: see here. Dell OpenManage Server Administrator seems to have been causing hourly slowness. It would occasionally peg one of the CPUs for upwards of two minutes. Disabling it drastically improved the performance of the SQL Server. The server hardware: Dell R710 Dual Quad Core 2.9GHz Processors 96GB Memory 2 Disk RAID 1 SAS System Disk (Internal) 4 Disk RAID 10 SAS Log Disk (Internal) 14 Disk RAID 10 SAS Data Disk (External DAS MD1000) Windows 2008 Enterprise R2 x64 We installed the OS using Dell OpenManage Server Assistant, so I assume that it was correctly configured. For now we have disabled OMSA to alleviate the performance issues it was causing, but I'd like to be able to re-enable it. Has anyone had a similar experience that can shed a little light on the nature of this problem?

  Read the article

• Can I have different ESX hosts accessing the same LUN over different protocols?

  - by Kevin Kuphal

  I currently have a cluster of two ESX 3.5U2 servers connected directly via FiberChannel to a NetApp 3020 cluster. These hosts mount four VMFS LUNs for virtual machine storage. Currently these LUNs are only made available via our FiberChannel initator in the Netapp configuration If I were to add an ESXi host to the cluster for internal IT use can I: Make the same VMFS LUNs available via the iSCSI initiator on the Netapp Connect this ESXi host to those LUNs via iSCSI Do all of this while the existing two ESX hosts are connected to those LUNs via FiberChannel Does anyone have experience with this type of mixed protocol environment, specifically with Netapp?

  Read the article

• ESXi 5 network performance is slow

  - by R D

  We just did a fresh install of ESXi 5 on a host that was running ESX 4 before. Nothing has changed hardware wise. After the upgrade network performance is much slower. Even copying a big file from one VM to another VM within same virtual switch is slower compared to other hosts that are running ESX 4. Network cards are auto-negotiating at 1Gbps as were on ESX 4 prior to upgrade. All settings are default and I haven't played with Advanced Settings at all. Before opening a case with vmware, wanted to know if I am missing something or if others have experienced similar issues and found a fix?

  Read the article

• straight to grub prompt on boot

  - by cheshirekow

  I am very lost. I did a fresh install of Ubuntu 10.04 on a laptop. First reboot was fine. I ran all the recommended upgrades, and now every time I start I get just a grub>_ prompt. No error message, just the prompt, and a little banner at the top saying grub's version and telling me that I have minimal bash style editing. I've tried: 1) Re-installing grub via sudo grub-install sda (There is only one disk with only two partitions, one primary, and one for swap) 2) Changed GRUB_HIDDEN_TIMEOUT=10 GRUB_TIMEOUT=30 GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=90" GRUB_CMDLINE_LINUX="rootdelay=90" in /etc/default/grub. No luck. I can boot with the following: grub> set root=(hd0,1) grub> probe (hd0,1) -u c00fadde-f7e8-45e7-a4da-0235605f756 grub> linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235605f756 rootdelay=90 grub> initrd /boot/initrd.img-2.6.32-21-generic grub> boot And then everything seems to be fine from there. From the grub prompt if I try configfile /boot/grub/grub.cfg The screen clears and I get another grub prompt. So, seriously, what could the problem be? edit: Full text of /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=30 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro rootdelay=90 rootdelay=90 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c00fadde-f7e8-45e7-a4da-0235c605f756 ro single rootdelay=90 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set c00fadde-f7e8-45e7-a4da-0235c605f756 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ ${timeout} != -1 ]; then if sleep --verbose --interruptible 10 ; then set timeout=0 fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### output of update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done contents of /boot total 14280 -rw-r--r-- 1 root root 640617 2010-04-16 09:01 abi-2.6.32-21-generic -rw-r--r-- 1 root root 115847 2010-04-16 09:01 config-2.6.32-21-generic drwxr-xr-x 3 root root 4096 2010-09-08 02:42 grub -rw-r--r-- 1 root root 7968754 2010-09-02 01:49 initrd.img-2.6.32-21-generic -rw-r--r-- 1 root root 160280 2010-03-23 05:37 memtest86+.bin -rw-r--r-- 1 root root 1687378 2010-04-16 09:01 System.map-2.6.32-21-generic -rw-r--r-- 1 root root 1196 2010-04-16 09:03 vmcoreinfo-2.6.32-21-generic -rw-r--r-- 1 root root 4029792 2010-04-16 09:01 vmlinuz-2.6.32-21-generic

  Read the article

• CheckPoint SecuRemote / SecureClient on Vista 64

  - by cliff.meyers

  According to this page, CheckPoint's SecuRemote client is not supported on Vista 64: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit%5FdoGoviewsolutiondetails=&solutionid=sk36681 Unfortunately in working with the systems team they will not confirm if the other two clients (SSL Network Extender or Endpoint Connect) are supported by their environment. Does anyone know if it would be possible to do the following? Install VMware Workstation on my Vista 64 system (host) install a Vista 32-bit OS in a virtual machine (guest) Install SecuRemote VPN client within the guest (Vista 32) Get my Vista 64 machine (host) to use the VPN connection from the guest Any other ideas are more than welcome.

  Read the article

• SBS2003 OWA not displaying images on external side

  - by JasonC

  I've got an SBS 2003 server with companyweb/remote owa site. After authenticating remotely to the https:/servername/remote site, and then clicking on Use Outlook Web Access, the mail/owa site displays only limited amounts of data with Loading... displayed (see first image). This is different when viewing the site on the server itself (see second image). Different browsers will display different types of data (last screenshot is Chrome - first two are IE). I feel IIS permissions on the virtual directories is the cause, but not certain. Forms-based authentication etc is working ok etc. Any suggestions? Authentication and getting email via ActiveSync is not a problem. I don't want to break anything, and it's not a major problem because the users only get their email via outlook and iphones anyway without problems. I'm more interested in finding out for my own info so please give me some suggestions to try. Thanks for looking!

  Read the article

• Apache default NameVirtualHost does not work

  - by Luc

  Hello, I have 4 Name Virtual Hosts on my apache configuration, each one using proxy_http to forward request to the correct server. They work fine. <VirtualHost *:80> ServerName application_name.domain.tld ProxyRequests Off ProxyPreserveHost On ProxyPass / http://server_ip/ ProxyPassReverse / http://server_ip/ </VirtualHost> I then tried to add a default NameVirtualHost to take care of the requests for which the server name does not match one of the four others. Otherwise a request like some_weird_styff.domain.tld would be forwarded to one of the 4 VH. I then added this one: <VirtualHost *:80> ServerAlias "*" DocumentRoot /var/www/ </VirtualHost> At the beginning it seemed to work fine, but at some point it appears that the requests that should be handed by one of the 4 regular hosts is "eaten" by the default one !!! If I a2dissite this default host, everything is back to normal... I do not really understand this. If you have any clue... thanks a lot, Luc

  Read the article

• PHP Configuration file won’t load IIS7 x64

  - by Martin Murphy

  using Fast CGI I can't get it to read the php.ini file. See my phpinfo below. System Windows NT WIN-PAFTBLXQWYW 6.0 build 6001 Build Date Mar 5 2009 19:43:24 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--with-snapshot-template=d:\php-sdk\snap_5_2\vc6\x86\template" "--with-php-build=d:\php-sdk\snap_5_2\vc6\x86\php_build" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--enable-htscanner=shared" Server API CGI/FastCGI Virtual Directory Support disabled Configuration File (php.ini) Path C:\Windows Loaded Configuration File (none) Scan this dir for additional .ini files (none) My php.ini file is residing in both my c:\php and my c:\windows I've made sure it has read permissions in both places from network service. I've added various registry settings, Environment Variables and followed multiple tutorials found on the web and no dice as of yet. Rebooted after each. My original install was using MS "Web Platform Installer" however I have since rebooted. Any ideas on where to go from here would be most welcome.

  Read the article

• Windows Media Center says "Searching for tuners" when I try to play live TV

  - by Louis

  After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

  Read the article

• MacBookPro RAM: CL7 or CL9

  - by chris_l

  Hi, I want to increase the RAM in my MacBookPro 15", 2.53 GHz, Mid-2009. I currently have 4GB, and I want 6GB (and upgrade to 8GB later - I think this should work with my model: http://forums.macrumors.com/showthread.php?t=573906) Now I see two offers: 1x4GB DDR3 1333 CL9 9-9 (149 EUR) 1x4GB DDR3 1066 CL7 7-7 (192 EUR). Both are from the same brand (Transcend), both are labeled "For MacBook/MacBookPro". Now I have no idea, which of these would work better with the 2GB RAM module from my currently installed memory (Running at 1067 MHz, according to System Profiler - but with what CL setting?) Would the 1333 CL9 RAM be set to CL7 when running at 1066 MHz? Thanks, Chris PS Should I expect problems when I later upgrade to 8GB with a different module (in case the same module won't be produced anymore)?

  Read the article

• Is my PC Good enough [closed]

  - by Moinak Nath

  I'm getting a new laptop this Christmas and I was wondering if it's good enough for what I do. I'll be playing games like Need for Speed: Most Wanted (2012) and other NFS games. Also silent hunter and flight sim. I also browse the internet download stuff like, watch movies occasionally type documents with word, edit videos, and transfer files. To be more specific is the hdd big enough? is the ram big enough? Is the graphics card good? is the cpu speed enough, and is Windows windows 8 good for all these things. i also video chat so these are the specs 2.2 Ghz Intel Pentium B960 Dual Core 4 GB RAM 320 GB HDD Intel HD Graphics 720p Webcam 4 USB Ports (2 USB 3.0 @ 2 USB 2.0) HDMI Port It Is a Lenovo IdeaPad This is the one im Looking at http://www.bestbuy.com/site/Lenovo+-+IdeaPad+15.6%26%2334%3B+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Black/6851264.p?id=1218809260330&skuId=6851264#tab=specifications

  Read the article

• IIS 7.5 FTP IIS Manager Users Login Fail (530)

  - by Jim

  IIS 7.5 FTP IIS Manager Users Login Fail (530) I'm trying to set up a FTP site on IIS 7.5 that allows IIS Manager Users to login. I'm following this guide: http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/. After set up, I cannot login to the FTP using an IIS Manager User account. The client error I got was 530 User cannot log in. Win32 error: Unspecified error. Error details: An error occured during the authentication process. I tried both with or without a virtual host. A Windows account login fine. The only strange thing I noticed was that when setting up Read permission for Network Service, there was an access denied error when setting up permission for "%SystemDrive%\Windows\System32\inetsrv\config\schema". Any thoughts? Thanks!

  Read the article

• SNMP: how to get combined output of memBuffer, memCached and memAvailReal?

  - by user492160

  Below is the output of 'free -m' on my system: total used free shared buffers cached Mem: 2026 1936 90 0 212 649 -/+ buffers/cache: 1074 952 Swap: 3359 0 3359 I'd like to retrieve the value 952 of -/+ buffers/cache using 'snmpwalk'. This is for integrating 'free memory' availability with Cacti-poller. But currently the only values available are: # snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4 UCD-SNMP-MIB::memIndex.0 = INTEGER: 0 UCD-SNMP-MIB::memErrorName.0 = STRING: swap UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 3440632 UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 3440576 UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 2075556 UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 92552 UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 3533128 UCD-SNMP-MIB::memMinimumSwap.0 = INTEGER: 16000 UCD-SNMP-MIB::memShared.0 = INTEGER: 0 UCD-SNMP-MIB::memBuffer.0 = INTEGER: 217388 UCD-SNMP-MIB::memCached.0 = INTEGER: 664904 UCD-SNMP-MIB::memSwapError.0 = INTEGER: 0 UCD-SNMP-MIB::memSwapErrorMsg.0 = STRING: Is it possible to retrieve the combined value of memBuffer+memCached+memAvailReal using snmpwalk for graphing with Cacti and RRDTool? If not what options do I possibly have? I'm using net-snmp 5.3.2 on my agent host. Thanks in advance.

  Read the article

• Windows Explorer is blank

  - by Scott Mitchell

  I am using Windows 7 Utlimate x64. Once a week, or so, when I boot up n the morning and launch Windows Explorer it shows up blank, as the following screen shot show. Clicking on my Computer doesn't load anything. Interestingly, I can go the the Address bar at the top and type in a folder name. This brings up that folder's files and subfolders, but as I drill around the tree of folders on the left only shows the immediate folder and not its siblings. There's no plus icon to expand the folder, etc. My usual "solution" is to reboot, which typically brings everything back to normal, but this is a frustrating remedy. Any idea what's going on and how to fix it? Some Googling turned up this discussion, but the remedy was to uninstall a particular piece of software that I don't have installed (Virtual Clone Drive). Thanks

  Read the article

• Best way to automatically synchronize files between Linux and Windows

  - by Gregory

  My first choice was rsync but it caused some issues and is too manual. My second choice, currently under evaluation is Unison. Are there any other good options for bi-directional auto-syncing? The synching tool cannot add it's own files to the directories to be synched. Which removes CVS/SVN as a choice. Plus they are too manual. The requirements are user-level program on both sides, no root account access available. Only scanning on linux. On windows it could be a virtual drive/path. Very fast and efficient like rsync. Some other requirements include: machines are not on the same network, files cannot fall into the wrong hands, nor can they be handled by 3rd parties, this pretty much excludes all online storage sites.

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >