Search Results

Search found 24149 results on 966 pages for 'visual studio package'.

Page 529/966 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

  • Compiled ruby fails to find curses

    - by Hamish Downer
    I'm attempting to install the sup MUA but I'm having trouble. When I try to run it, it can't find curses: /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- curses (LoadError) ... I am installing on a server running CentOS 5. I have compiled ruby and rubygems from source, and then installed sup using rubygems. I followed this article to compile ruby. I have found having a similar problem on ubuntu. The fix suggested there is to install libcurses-ruby, but I can't find a similarly named package in CentOS. I have installed the ncurses-devel package, as that was required for installing sup using gem. I have also installed the ncurses, cursesx and rbcurse gems, but none of these have fixed the problem. The article above about compiling ruby said you had to recompile the zlib extension, after doing: cd ext/zlib sudo ruby extconf.rb --with-zlib-include=/usr/include --with-zlib-lib=/usr/lib cd ../.. sudo make sudo make install So I've tried a few variants in ext/curses. The top few lines of ext/curses/extconf.rb are require 'mkmf' dir_config('curses') dir_config('ncurses') dir_config('termcap') So I've tried a few variants of setting paths: sudo ruby extconf.rb --with-curses-include=/usr/include --with-curses-lib=/usr/lib --with-ncurses-include=/usr/include --with-ncurses-lib=/usr/lib --with-termcap-lib=/lib sudo ruby extconf.rb --with-curses-include=/usr/include --with-curses-lib=/usr/lib --with-termcap-lib=/lib and re-doing the make, but to no avail as yet. Any ideas to move it forward are welcome.

    Read the article

  • cfengine3 file_copy only on source side change

    - by megamic
    I am using the 'digest' copy method for all file copy promises, because of the way we package and deploy software, I cant rely on mtime for the criteria for updating files. For various reasons, I am not employing the client-server approach with a central configuration server: rather we package and deploy our entire configuration module to each server, so from cf-engine's perspective, the source and target are local on the server it is running. The problem I am having with this approach is that the source will always update the target when they differ - which is what I want most of the time, usually because the source has been updated. However, like many other cfengine users, we are running an operational environment, where occasionally emergency fixes have to be applied immediately - meaning we don't have time to rebuild and redeploy a configuration module, and the fix will often be applied by deploying a tarball with specific changes. Of course this is problematic if cf-engine comes along 5 mintues later and reverts the changes. What we would like is to be able to make small, incremental changes to our servers, without them being reverted, until the next deployment cycle at which time the new source files would be copied. We do not consider random file corruption or mistaken changes to involve enough risk to warrant having cfengine constantly revert deployments to their source copy - the ability to deploy emergency fixes and have them stay that way until the next deployment would be of much greater value and utility. So, after all that, my question is this: is cf-engine capable of detecting whether it was the source or target that changed when the files differ, and if so, is their a way to use the 'digest' copy method but only if the source side changed? I am very open to other ideas and approaches as-well, as I am still quite new to this whole configuration management thing.

    Read the article

  • Unsigned lenny packages with aptitude safe-upgrade

    - by Liam
    I have several Debian lenny computers. Two have nearly identical sources.list files. On both, I do regular update/safe-upgrades. On one it always goes smoothly. On the other, much of the time I get the following: sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages will be upgraded: krb5-clients krb5-ftpd krb5-rsh-server krb5-telnetd krb5-user libimlib2 libkadm55 libkrb53 libpng12-0 libpulse0 xpdf xpdf-common xpdf-reader 13 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 2906kB of archives. After unpacking 36.9kB will be used. Do you want to continue? [Y/n/?] WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. krb5-rsh-server krb5-user krb5-ftpd krb5-clients libkrb53 xpdf-reader libpng12-0 libkadm55 xpdf libpulse0 libimlib2 krb5-telnetd xpdf-common Do you want to ignore this warning and proceed anyway? To continue, enter "Yes"; to abort, enter "No": no Abort. Needless to say, I don't proceed. What is going on? How do I fix it? These are the non-comment lines in the sources.list for this computer: deb ftp://ftp.debian.org/debian/ lenny main contrib non-free deb-src ftp://ftp.debian.org/debian/ lenny main contrib deb http://security.debian.org/ lenny/updates main contrib non-free Thank you.

    Read the article

  • Compiling Java code in terminal having a Jar in CLASSPATH

    - by Masi
    How can you compile the code using javac in a terminal by using google-collections in CLASSPATH? Example of code trying to compile using javac in a terminal (works in Eclipse) import com.google.common.collect.BiMap; import com.google.common.collect.HashBiMap; public class Locate { ... BiMap<MyFile, Integer> rankingToResult = HashBiMap.create(); ... } Compiling in terminal src 288 % javac Locate.java Locate.java:14: package com.google.common.collect does not exist import com.google.common.collect.BiMap; ^ Locate.java:15: package com.google.common.collect does not exist import com.google.common.collect.HashBiMap; ^ Locate.java:153: cannot find symbol symbol : class BiMap location: class Locate BiMap<MyFile, Integer> rankingToResult = HashBiMap.create(); ^ Locate.java:153: cannot find symbol symbol : variable HashBiMap location: class Locate BiMap<MyFile, Integer> rankingToResult = HashBiMap.create(); ^ 4 errors My CLASSPATH src 289 % echo $CLASSPATH /u/1/bin/javaLibraries/google-collect-1.0.jar

    Read the article

  • Cannot resolve dependencies when trying to install gnome-libs or xscreensaver on linux

    - by Frank
    I am a linux noob and am trying to install ORacle10g on RHEL5 but am running into difficulties on the requirements stage. The only 2 packages I require is gnome-libs and xscreensaver. I have downloaded both: 'gnome-libs-1.4.1.2.90-44.1.i386.rpm 'xscreensaver-4.18-5.rhel4.11.i386.rpm' But when I try to install them I get dependency errors. I have been trawling sites and forums for 2 days now and am no closer to resolving this and continuing with my Oracle install. To pre-empt possible trouble-shooting questions, here is a list of the dependcies that could not be resolved: For gnome-libs: libdb.so.2(GLIBC_2.0) ORBit libdb.so.2 libllOP.so.0 libORBitCosNaming.so.0 libORBitutil.so.0 libORBit.so.0 libpng.so.2 And it says all the above is needed by package 1:gnome-libs-1.4.1.2.90-44.1.i386(/gnome-libs-1.4.1.2.90-44.1.i386) For xscreensaver: xloadimage is needed by package 1:xscreensaver-4.18-5.rhel4.11.i386(/xscreensaver-4.18-5.rhel4.11.i386) Sorry if I have explained this in a crap way - like I said - linux noob here. Any help with this would be great, its been a long 2 days so far - i need to get this resolved soon. Thanks

    Read the article

  • Remote Desktop to Server 2008 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

  • Can anyone explain these differences between two similar i7 processors? [closed]

    - by Brian Frost
    I have two systems I've just built. They both have i7 processors and Asus P8Z77 motherboards. When I run a simple processor loop benchmark that I wrote in Delphi some time back I get one machine showing nealry twice as fast as the other. I then used CPU-Z to dump me the details of the hardware and I see that the fast machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2700K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 3610.7 MHz Multiplier x FSB 36.0 x 100.3 MHz Stock frequency 3500 MHz the slow machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2600K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 1648.2 MHz Multiplier x FSB 16.0 x 103.0 MHz Stock frequency 3400 MHz i.e the slow machine has a 2600k to the fast machine 2700k. The very different "Multiplier x FSB" must be significant but I dont understand how two processors with a very 'similar' number can be so different. To get the machines the same must I copy the processors or is there some clever setting that I can change? Thanks for any help. Brian.

    Read the article

  • installing Conkeror on Ubuntu 12.04

    - by Menelaos Perdikeas
    I am reading the instructions on conkeror site (and elsewhere) on how to install conkeror on Ubuntu (I am using Ubuntu 12_04 LTS) and it seems that the correct sequence is: sudo apt-add-repository ppa:xtaran/conkeror sudo apt-get update sudo apt-get install conkeror conkeror-spawn-process-helper The first step (apt-add-repository) seems to execute without a problem, giving the following output: You are about to add the following PPA to your system: Conkeror Debian packages for Ubuntu releases without xulrunner (i.e. for 11.04 Natty and later) More info: https://launchpad.net/~xtaran/+archive/conkeror Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret- keyring /tmp/tmp.Re7pWaDEQF --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv CB29CBE050EB1F371BAB6FE83BE0F86A6D689050 gpg: requesting key 6D689050 from hkp server keyserver.ubuntu.com gpg: key 6D689050: "Launchpad PPA for Axel Beckert" not changed gpg: Total number processed: 1 gpg: unchanged: 1 However, the apt-get update seems unable to fetch packages from the newly added PPA, with its output ending in: Hit http://security.ubuntu.com precise-security/restricted Translation-en Hit http://security.ubuntu.com precise-security/universe Translation-en Err http://ppa.launchpad.net precise/main Sources 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en_US Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise /main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. Accordingly, apt-get-install conkeror fails with: mperdikeas@mperdikeas:~$ sudo apt-get install conkeror Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package conkeror Any ideas what might be wrong ?

    Read the article

  • Error when starting .Net-Application from ThinApp-Application

    - by user50209
    one of our customers uses SAP through VMWare ThinApp. In SAP there is a button that launches an .Net application from a server. When starting the .Net-application directly, there is no error. If the user tries to start the application by clicking the button in the ThinApp-Application, it displays the following errors: Microsoft Visual C++ Runtime Library R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. After clicking "OK" it displays: Microsoft Visual C++ Runtime Library Runtime Error! R6030 - CRT not initialized So, does the customer have to install some components into his ThinApp (if yes, which?) to get things working? Regards, inno ----- [EDIT] ----- @Sean: It's installed the following way: The .exe of the .Net-Application is on a mapped drive on a server. All clients have the requirements installed (.Net-framework for example) and start the .exe from the mapped drive. The ThinApp-Application tries to start this application and throws the mentioned exceptions. AFAIK there are no entry points for this application configured. What I should also mention is: The .Net-Application crashes during execution. That means, we have a debug mode implemented that shows what the application is doing. The application shows what it's doing and after some steps it crashes. The interesting point is: It's a .Net-application, not a C++ Application.

    Read the article

  • Problem with single quotes in man pages

    - by Peter
    When I ssh into my Debian Lenny server and open a man page, single quotes appear to be messed up. Example from the man page of apt-get: If no package matches the given expression and the expression contains one of ´.´, ´?´ or ´*´ then it is assumed to be a POSIX regular expression, and it is applied to all package names in the database. Any matches are then installed (or removed). Note that matching is done by substring so ´lo.*´ matches ´how-lo´ and ´lowest´. If this is undesired, anchor the regular expression with a ´^´ or ´$´ character, or create a more specific regular expression. I'm on Mac OS X and using xterm. If I use Terminal, the problem doesn't happen. My locale is configured correctly as far as I can see: $ locale LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= I'm not sure what's wrong with my environment, and I have no idea what to check next. I'd appreciate help.

    Read the article

  • apt-get : Size mismatch

    - by Cédric Girard
    I created a private deb repository to spread a software and it's updates to 600 Ubuntu netbooks. Each time the network is connected, my script try to do a apt-get update. But sometimes (quite often in fact), I have this : Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch The server is an 2.2 Apache, HTTPS only. There is no error on it's logs. Here is the script : apt-get update apt-get dist-upgrade --force-yes --yes Here is the complete output of apt-get Ign https://myserver maverick Release.gpg Ign https://myserver/ubuntu/ maverick/main Translation-en Ign https://myserver maverick Release Ign https://myserver maverick/main i386 Packages/DiffIndex Ign https://myserver maverick/main i386 Packages Ign https://myserver maverick/main i386 Packages Hit https://myserver maverick/main i386 Packages Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: majdb utilitaires voosicomat 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 6207kB/6273kB of archives. After this operation, 0B of additional disk space will be used. WARNING: The following packages cannot be authenticated! utilitaires voosicomat majdb Get:1 https://myserver/ubuntu/ maverick/main voosicomat all 2.0.1 [4755kB] Get:2 https://myserver/ubuntu/ maverick/main majdb all 1.0.17 [1452kB] Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch Fetched 7091kB in 21s (324kB/s) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Regards Cédric

    Read the article

  • SkyDrive broken after upgrade to Windows 8.1: "This location can't be found, please try later"

    - by avo
    Upgrading from Windows 8 to Windows 8.1 via the Store upgrade path has screwed my SkyDrive. The C:\Users\<user name>\SkyDrive folder is empty (it only has single file desktop.ini). When I open the native (Store) SkyDrive app, I see "This location can't be found, please try later". I'm glad to still have my files alive online in my SkyDrive account. I tried disconneting from / reconnecting to my Microsoft Account with no luck. Anyone has an idea on how to fix this without reinstalling/refreshing Windows 8.1? From Event Viewer: Faulting application name: skydrive.exe, version: 6.3.9600.16412, time stamp: 0x5243d370 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0x00000000 Fault offset: 0x0000000000000000 Faulting process ID: 0x4e8 Faulting application start time: 0x01cece256589c7ee Faulting application path: C:\Windows\System32\skydrive.exe Faulting module path: unknown Report ID: {...} Faulting package full name: Faulting package-relative application ID: Also: The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} and APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool. Never was a big fan of in-place upgrade anyway, but this time it was a machine which I use for work, with a lot of stuff already installed on it. Shouldn't have tried to upgrade it in the first place, but was convinced Windows 8.1 is a solid update. Another lesson learnt.

    Read the article

  • Using gitlab behind Apache proxy all generated urls are wrong

    - by Hippyjim
    I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

    Read the article

  • How to set CA cert file for LDAP backend server in smbpasswd configuration

    - by hayalci
    I am having a problem with smbpasswd, an LDAP backend server and SSL/TLS certificates. The client machine that I run smbpasswd on is a Debian Etch machine, and the Ldap server is Sun DS running on Solaris. All the following occurs on the client. When I disable SSL, by setting "ldap ssl = no" in smb.conf, the smbpasswd program works without errors. When I set "ldap ssl = start tls", the following messages are printed by smbpasswd and there is a long timeout period before any password is asked by it Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! ..... long delay ..... New SMB password: Retype new SMB password: Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! smbpasswd: /tmp/buildd/openldap2-2.1.30/libraries/liblber/io.c:702: ber_get_next: Assertion `0' failed. Aborted I conducted some tests with "ldapsearch -ZZ". It was not working at first, but after I added the TLS_CACERT line to /etc/ldap/ldap.conf, /etc/libnss-ldap.conf and /etc/pam_ldap.conf, it started working. So relevant TLS sections in all those files are: ssl start_tls tls_checkpeer no tls_cacertfile /path/to/ca-root.pem TLS_CACERT /path/to/ca-root.pem But the smbpasswd program continued giving the error. I tried creating /etc/smbldap-tools/smbldap.conf file with following content (after consulting debian docs for smbldap-tools package) But as I see, smbpasswd comes with samba-common package and does not use the configuration for smbldap-tools utilities. verify="optional" cafile="/path/to/ca-root.pem" My question is: How can I set which SSL CA Certificate is used by smbpasswd program ?

    Read the article

  • How does Windows 7 taskbar "color hot-tracking" feature calculate the colour to use?

    - by theyetiman
    This has intrigued me for quite some time. Does anyone know the algorithm Windows 7 Aero uses to determine the colour to use as the hot-tracking hover highlight on taskbar buttons for currently-running apps? It is definitely based on the icon of the app, but I can't see a specific pattern of where it's getting the colour value from. It doesn't seem to be any of the following: An average colour value from the entire icon, otherwise you would get brown all the time with multi-coloured icons like Chrome. The colour used the most in the image, otherwise you'd get yellow for the SQL Server Management Studio icon (6th from left). Also, the Chrome icon used red, green and yellow in equal measure. A colour located at certain pixel coordinates within the icon, because Chrome is red -indicating the top of the icon - and Notepad++ (2nd from right) is green - indicating the bottom of the icon. I asked this question on ux.stackoverflow.com and it got closed as off-topic, but someone answered with the following: As described by Raymond Chen in this MSDN blog article: Some people ask how it's done. It's really nothing special. The code just looks for the predominant color in the icon. (And, since visual designers are sticklers for this sort of thing, black, white, and shades of gray are not considered "colors" for the purpose of this calculation.) However I wasn't really satisfied with that answer because it doesn't explain how the "predominant" colour is calculated. Surely on the SQL Management Studio icon, the predominant colour, to my eyes at least, is yellow. Yet the highlight is green. I want to know, specifically, what the algorithm is.

    Read the article

  • gentoo zlib removed = portage corrupted

    - by Shamanu4
    Hello I'm using gentoo not for a long time and have made such mistake: I've removed zlib package from system. Now i've got my portage system corrupted: # emerge --sync Traceback (most recent call last): File "/usr/bin/emerge", line 36, in <module> from _emerge.main import emerge_main File "/usr/lib64/portage/pym/_emerge/main.py", line 41, in <module> from _emerge.actions import action_config, action_sync, action_metadata, \ File "/usr/lib64/portage/pym/_emerge/actions.py", line 44, in <module> from _emerge.depgraph import backtrack_depgraph, depgraph, resume_depgraph File "/usr/lib64/portage/pym/_emerge/depgraph.py", line 40, in <module> from _emerge.FakeVartree import FakeVartree File "/usr/lib64/portage/pym/_emerge/FakeVartree.py", line 11, in <module> from portage.dbapi.vartree import vartree File "/usr/lib64/portage/pym/portage/dbapi/vartree.py", line 56, in <module> import re, shutil, stat, errno, copy, subprocess File "/usr/lib64/python2.6/subprocess.py", line 430, in <module> import pickle File "/usr/lib64/python2.6/pickle.py", line 1258, in <module> import binascii as _binascii ImportError: libz.so.1: cannot open shared object file: No such file or directory How can I reinstall zlip package and repair system?

    Read the article

  • Ubuntu upgrade process failed

    - by Spin0us
    I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

    Read the article

  • Why does this preseed for gitolite fail?

    - by troutwine
    I'm installing gitolite on a Debian Squeeze box with the following preseed: gitolite gitolite/gituser string git gitolite gitolite/adminkey string ssh-rsa AAAAB3ECT gitolite gitolite/gitdir string /var/lib/git On installation: # debconf-set-selections /var/cache/debconf/gitolite.preseed # apt-get install gitolite Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: git-daemon-run gitweb The following NEW packages will be installed: gitolite 0 upgraded, 1 newly installed, 0 to remove and 26 not upgraded. Need to get 0 B/114 kB of archives. After this operation, 348 kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package gitolite. (Reading database ... 24715 files and directories currently installed.) Unpacking gitolite (from .../gitolite_1.5.4-2+squeeze1_all.deb) ... Setting up gitolite (1.5.4-2+squeeze1) ... adduser: The home dir must be an absolute path. dpkg: error processing gitolite (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: gitolite E: Sub-process /usr/bin/dpkg returned an error code (1) Why? The pre-seed was extracted from a manually configured installation, per here and exists without issue on another machine.

    Read the article

  • How to get back the themes feature in Windows XP?

    - by Martín M.
    When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

    Read the article

  • Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

    - by Emerson
    I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

    Read the article

  • How do I calculate the cost of printing a given page?

    - by Alenanno
    I have seen questions like How much does a square inch of ink cost and How much more will a high-dpi image cost to print?, but mine isn't asking neither about a specific case, nor about how much something costs, as that would depend on the toner, for example. Rather, I was wondering how should I go about calculating the cost of printing a given page. Note that "given page" should be seen as a sort of x, i.e. the answer should be applicable in any case; I'd like this question to provide a good reference for those who want to calculate this cost. What should be taken into consideration? The cost of a single page (the paper only) is easily checkable, since you divide the cost of the whole package for the number of pages in the package itself. But how do I calculate the cost of the ink/toner? Which could translate to: how do I calculate the Ink Density1 for a given printer? I know it depends on quality of the printer itself, the type, the quality of the image being printed, the very nature of what I'm going to print, etc. But again, the focus of my question is not on the variables of this case, but rather the constants, hoping the math simile works for this case too. 1: Total amount of ink in one area of the page.

    Read the article

  • Determine wifi capabilities of Windows box (with WSUS install rules)

    - by Hagen von Eitzen
    I need to determine if a computer is in fact a laptop with wifi capabilities (with emphasis on wifi rather than laptop). More precisely, I want to distribute a piece of software I wrote via WSUS and Local Update Publisher to those clients. To this end, I want to create appropriate "Package installable rules", that is simple rule used bay the Windows Update Service on the client to decide beforehand whether or not an update/installation package is applicable. Typically, such "installabel rules" are logical combinations of rules of type "File exists", "Registry Key exists", "WMI Query", "MSI Product Installed", so I'd prefer one of those methods. The method I hope someone here can help me find should work with Win 7/Vista, preferably also with XP. My guess is that WMI query is the way to go, but I have little experience in that. I have found that one can e.g. query for EnclosureType and that might detect a laptop. However, I would be much happier if an actually available wifi interface would be detected. Does anyone have an idea how to approach this? If there is anything you need me to clarify, don't hesitate to comment.

    Read the article

  • Windows Action Center notification icon says Backup in Progress when no backup is occurring

    - by allquixotic
    How can I get Windows Action Center's little flag in the notification area to stop saying "Backup In Progress" on Windows 8? It's driving me nuts. I disabled the Windows Backup service completely and turned off File Recovery. Nothing that I can tell is using any disk I/O whatsoever, by examining Task Manager's resource monitor. It's just a visual cue that seems totally wrong considering my disk is only using about 50 KB/s of sporadic writes for superfetch etc. This wouldn't be a problem for me, since I rely on the knowledge that the Backup service is disabled and there's no disk activity, but I am trying to support a more traditional user who relies on visual cues from the operating system and trusts them over low-level observations like "...but the Windows Backup service is disabled!" Therefore this user still thinks that the backup is going on, even after the service is disabled. Technically, I think this is a bug in Windows 8. It really should not be displaying "Backup in Progress" if ... you know ... a backup, is not, in progress. Which it isn't. Is there a workaround?

    Read the article

  • Desktop Provisioning for a Small Linux Software Development Team

    - by deakblue
    Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

    Read the article

  • Running multiple copies of openssh-server (sshd) on Ubuntu

    - by cecilkorik
    I may be attacking this problem the wrong way, if so let me know. I have a server which is available through SSH from both the public internet and the local LAN. I would like to have two very different security policies for each, by running two copies of sshd with two different sshd_config files each on a different port. Some of the things I'd like to change is to allow password or public-key authentication on the LAN, but public-key only from the internet. All (real) users could login from the LAN side, but only certain authorized users would be individually whitelisted to login through the internet. As far as I can tell this requires having two different SSH daemons running on different ports with different sshd_configs. I am fine with the different ports part, I can easily forward port 22 to any port I want through my firewall. So my question is what is the best way to actually START the second sshd under Ubuntu 10.04 LTS. Is there a recommended way to do something like this? Surely I am not the first person with this sort of need. I have a bit of experience with upstart, and I can manually hack the second sshd into /etc/init/ssh.conf I suppose but I'm not sure if that will get overwritten by the package. However I do it, It's important to ensure both sshd processes always get restarted after any automatic or manual upgrade of the openssh-server package. Thanks in advance.

    Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >