Search Results

Search found 2355 results on 95 pages for 'dvd rom'.

Page 53/95 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Create Hidden Partition on USB

    - by Francesco
    I need to split an USB flash disk into two USB drives, each one with its own drive letter, but one of these has to be hidden. In the non-hidden partition I want to place my software, and in the hidden partition I need to place some files that are required by the software in order to work. Moreover, only the software may read, write, delete or execute the files in this partition. I thought to use a little partition viewed as a CD-ROM drive, as they do in many flash drives, but this solution does not allow to write other data in a second moment, and it's visible to the user that can read the file. Obviously the software must be able to access to partition and read, write, delete or execute the content. Is there a solution to do so, possibly that work also on Linux?

    Read the article

  • How to UEFI install Ubuntu 12.10?

    - by Geezanansa
    Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

    Read the article

  • Buildcraft Minecraft mod causing crashes, NVIDIA-304xx Linux Drivers, KDE

    - by wolfo9999
    All is perfect, 96 fps average. Until an item tries to enter a buildcraft pipe. Tekkit instantly crashes, no error dialog. I have no idea what logs to look at for information on the crash, or how to fix it. OpenGL is enabled in KDE, Driver package is nvidia-304xx lspci output: VGA compatible controller: NVIDIA Corporation GT218 [Quadro FX 380M] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 172b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] [virtual] Expansion ROM at d3080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia

    Read the article

  • Can't install Ubuntu on a Z68xP-UD3p board

    - by Carl
    I have tried to install Ubuntu version 10, 11 and 12 64 bit on my Gigabyte Z68XP-UD3P motherboard using live CD and placing the DVD in the drive and starting the machine. When I go to install Ubuntu I get a dark screen and no text at all. When I go with Live CD I reboot and then I go right into the install from the boot menu and still get darkness. Nothing appears. I have a i7 intel CPU with Nvida Gefore GTX 560 Ti video board.

    Read the article

  • Weirdness After Reinstall The Windows Operating System

    - by Eka Anggraini
    I want to ask, and ask advice from you guys. I have reinstall my OS and successful, I'm turn off the restart a few times is fine .. Later a few hours later, when I turn it on, a sudden there was an error : Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM Select 'R' at the first screen to start repair. So I intend to repair, reinstall all again .. I enter cd windows : press any key .. with blue background text below: Setup is loading files (windows executive) Setup is loading files (hardware abstraction layer) Then I was waiting until half an hour, and no changes, I repeated the process several times is also nil. Please advice and solutions about the problem where? Hardware / cd Windows ?

    Read the article

  • Which Ubuntu version to use on a MAXDATA laptop Eco 3100X ? with this system info

    - by Erjet Malaj
    i am speaking as new ubuntu user, i just have installed ubuntu 10.04 on my laptop, but is running very slow... So i am here to ask you a question: WHich ubuntu version can fit for my laptop MAXDATA Eco 3100x, . My Laptop System Information are: SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release. GNOME: 2.30.2 (Ubuntu 2010-06-25) Kernel version: 2.6.32-40-generic (#87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012) GCC: 4.4.3 (i486-linux-gnu) Xorg: unknown (25 February 2012 06:59:39AM) (25 February 2012 06:59:39AM) Hostname: lotus-laptop Uptime: 0 days 1 h 6 min CPU INFORMATION GenuineIntel, Intel(R) Pentium(R) 4 CPU 2.40GHz Number of CPUs: 1 CPU clock currently at 2390.561 MHz with 512 KB cache Numbering: family(15) model(2) stepping(7) Bogomips: 4781.12 Flags: fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid MEMORY INFORMATION Total memory: 228 MB Total swap: 455 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: IBM-DJSA-210 SCSI device - scsi1 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 HARDWARE INFORMATION MOTHERBOARD Host bridge Silicon Integrated Systems [SiS] 650/M650 Host (rev 11) PCI bridge(s) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) USB controller(s) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) ISA bridge Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) IDE interface Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] 5513 [IDE] GRAPHIC CARD VGA controller Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Subsystem: Uniwill Computer Corp Device 5103 SOUND CARD Multimedia controller Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Uniwill Computer Corp Device 5203 NETWORK Ethernet controller Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Uniwill Computer Corp Device 5002 Modem Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) Subsystem: Uniwill Computer Corp Device 4003 Thanks you asap. :-) E

    Read the article

  • What are the minimum hardware requirements for the latest version of Android Jelly Bean OS?

    - by Stom
    I searched around, and there's no information that points exactly to the suggested, minimum, or otherwise dated information containing specifications on this. I want to install a newer version of Android on an older ZTE-X500 MetroPCS smartphone. However, I'd like to know the backwards compatibility in regards to using a newer featured OS with lackluster, limited hardware compared to today's smartphones, such as Galaxy S4. However, I still wish to do this. If Jelly Bean is too demanding, I will set up Honeycomb, or get a modified Honey Comb ROM, or tweak the source to my preferences. However, nothing outlines the specifics of the "system requirements" it suggests for optimum performance, such as RAM, processor speed, processor features, and/or any other features, like DMA, video circuit advancements, and/or sound and special hardware requirements noted as well. Please, if you will, point me to a source that mentions this, and please tell do not link me to any PDF file formats. Thank you. PS: I'm a computer programmer.

    Read the article

  • Hack Your Lights for Remote Control

    - by Jason Fitzpatrick
    This clever hack combines a modified wall switch with unused buttons on a universal remote to create one-touch wireless control of the lighting in a media room. Andrew, the tinker behind this home theater hack, writes: I really liked the idea of controlling my “Home Theater” lights with a remote (TV or other), this would save me the exhausting task of heaving myself off the couch to turn the lights on or off. I found one of my remotes has a spare power button, its one of those stupid “universal” remotes that comes with DVD players or TVs but only work if you have all the same brand equipment, I don’t so this made a good option for a light switch. Hit up the link below to check out more photos of his project and download the source code. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • Why is my Internet connection randomly dropping?

    - by Jeanno
    Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

    Read the article

  • Creating a spin from my installation

    - by LinuxPCplus
    Over the last 6 months or so I have tweaked & customized my Ubuntu installation until I have what I feel is a perfect Distro! Now I would like to turn it into a custom Ubuntu spin that can be run either as I live DVD/USB or installed to a users HDD. Is there an "easy" way to do this? I would want to use the standard Ubuntu installer but the distro would have it's own name, so I may need to customize the installer to reflect this.

    Read the article

  • N64oid Brings N64 Emulation to Android Devices

    - by ETC
    Craving some Ocarina of Time adventures, Super Mario 64 antics, or some Star Fox 64 flying on your Android device? N64oid brings retro emulation of Nintendo’s popular N64 console to Android devices. N64oid is an N64 console emulator for Android devices. You’ll need a copy of the $5.99 emulator, ROMs (from the usual sources, unless you’ve got a ROM ripping setup in your basement and a stack of old cartridges), and a suitably speedy Android device. Older Android devices will find the playback choppy and subpar, but newer and speedier devices like the Nexus-One and Samsung Galaxy should have no problem handling the emulator. Like all emulators N64oid is a work in progress and emulating an entire closed-system console on a totally different set of hardware is never a perfect 1:1 emulation, but if you’re a die hard fan of classic N64 titles (check out this list of top ranked titles to inspire some nostalgia) N64oid is worth the price of a burger for sure. N64oid [Android Market via Download Squad] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform] Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science]

    Read the article

  • Cannot make Wi-Fi hotspot

    - by Junaid
    I want to make my laptop as wi-fi hotspot. To do so, I pressed button Settings-Network-Wireless-Use as Hotspot.. Then it creates a wireless network connection 'Hostspot' and connects. But it gets disconnected just after making connection. Here is my network hardware info: sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:d9200000-d9201fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:45 ioport:2000(size=256) memory:d5010000-d5010fff memory:d5000000-d500ffff memory:d5020000-d502ffff My machine is running on Ubuntu 11.10 Can anybody help in it? Thanks

    Read the article

  • Problems installing Linux to IDE connected compact flash card

    - by mathematician1975
    I have been trying to install Ubuntu on some hardware (Netcom NC-499 board that contains a Vortex86DX processor). I am trying to install to a compact flash card attached to the board via an IDE adaptor, the aim being that the board will boot up and simply treat the compact flash like a normal hard drive. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it onto the card. I have been trying using a USB CD-ROM drive and the standard .iso image from the ubuntu site (md5 checksum works out fine so no problem there) but I have had no success at all. I have been able to do this with Ubuntu 8.04 but with no other version (9.04 and 10.04 desktop and alternative discs all fail). My question is what other options are available to me to try and install this? I have googled myself apart trying to find out but other than a few sites describing USB based installs using flash memory sticks for very specific hardware, I have found no useful info at all. Any suggestions will be gratefully received.

    Read the article

  • Cedarview drivers boot to a blank screen

    - by map7
    I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • Unable to create context rendering error when run OpenGL application

    - by Rodnower
    Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

    Read the article

  • Why does my Mac always crash when I enable `ask for password after screensaver ended`?

    - by Koning Baard XIV
    I have enabled these two things: Placing the mouse-pointer in the bottom-left corner of any display makes the screensaver appear After the screensaver or stand-by has ended, ask for password However, this combination always leads to this (Black Screen of Death) after entering the screensaver with the bottom-left corner: Here are my system specs: Hardware Overview: Model Name: iMac Model Identifier: iMac9,1 Processor Name: Intel Core 2 Duo Processor Speed: 2,66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 6 MB Memory: 2 GB Bus Speed: 1,07 GHz Boot ROM Version: IM91.008D.B08 SMC Version (system): 1.44f0 Serial Number (system): W89171JF0TF Hardware UUID: 323A90F0-8A2F-5057-B501-2087489E0DFF System Software Overview: System Version: Mac OS X 10.6.3 (10D573) Kernel Version: Darwin 10.3.0 Boot Volume: Macintosh HD Boot Mode: Normal Computer Name: YOU SHOULD NOT KNOW THIS User Name: YOU SHOULD NOT KNOW THIS Secure Virtual Memory: Not Enabled 64-bit Kernel and Extensions: No Time since boot: 11:46 Can anyone help me? Thanks

    Read the article

  • File Transfer using RDP

    - by DesigningCode
    I often use RDP to log into servers.   A couple of issues I have had is that its a pain to get files onto the server from my PC at times, and, if there is something missing from the servers windows install, I can’t simply pop the DVD into remote server in some unknown location on the internet somewhere. The other day I was curious if RDP actually had anything…since it did support shared clipboards, so I went for a look through the options and low and behold, *hidden* away….. Select Options… Go to the “Local Resources” Tab, then where it has “Local devices and resources” it sneakily has a “More…” button. Which then displays a drive selection box.  Select the drive you want …. Then on your server you will get….. Nice.  That is useful.

    Read the article

  • Just graduated from the finest graduates of the NeoSmart Technologies Institute of BCD Learning.

    - by Leonard Mwangi
    My laptop housing my life in entirety decided to go south this last weekend, cant blame it because I wanted it to do things that not even normal people :)  but it corrupted and could not get it going no matter what I tried. Imagining what I would loose (my POC's, Couple of VM's and lots and lots of documentation) pushed me to try anything short of reinstall. After toiling for about an hour looking for solution, I ended up at  http://neosmart.net/wiki/display/EBCD/Recovering+the+Vista+Bootloader+from+the+DVD where the last solution is the one that worked for me. I am glad to be functional again :) Thanks NeoSmart guys

    Read the article

  • How to run boot loader in VMWare?

    - by Asim Haroon
    I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

    Read the article

  • Unable to create context rendering error whet run OpenGL application

    - by Rodnower
    Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

    Read the article

  • I can't get Ubuntu installation to start

    - by tyler
    I have a computer with the following configuration: AZUS Sabertooth Motherboard Intel I5 2500 CPU Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO, booted from it, got the initial menu; attempting to either run the live version from DVD, or install to system. However the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then I tried wubi and ended up in the same position. EDIT: UEFI might be part of the problem? Based on the link below I have determined that the process will be too time consuming and or risky so I'm giving up. https://help.ubuntu.com/community/UEFIBooting

    Read the article

  • Can't boot Ubuntu after install Ubuntu

    - by Ramprasad
    I have downloaded Ubuntu 12.04.1 LTS 32 bit, burnt it on DVD and tried to install on my PC. My PC running in Windows 7 Ultimate 32 bit mounted on C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through CD, It boots and Ubuntu install window opens. Ask "Try Ubuntu" and "Install Ubuntu". I go on "Install Ubuntu". Then I go on install Ubuntu with Windows (First Option) - install. It shows some blank screen with some lines, and shows "Please Remove installation media and close tray and press enter". Then PC restarts and Run Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am a Android Developer. So I need to install Ubuntu for my Android Development purpose.

    Read the article

  • Windows doesn't boot after Ubuntu installation

    - by Diogo Garcia
    I have had serious problems installing Ubuntu and Windows and have dual boot. Recently I installed both operating systems, Ubuntu was the last one, and after that my computer was booting directly to Windows 7. I used my Ubuntu USB live to repair the grub, and could repair. Now I initiate my pc with grub 1.99 and Ubuntu and Windows are recognized, but Windows gives an error and don't initiate, suggesting to use Windows DVD to repair the grub. I tried that but with no effects on be behavior. I have a new asus n56vm. This conflicts with gpt and mbr have been a huge pain to me. I don't know what to to, I installed Ubuntu and Windows numerous times since I bought this computer 2 weeks ago.

    Read the article

  • How to connect to WPA2 encrypted wireless-network when booted from CloneZilla Live-CD?

    - by caligula
    My intention is to perform a backup of my laptop's (Dell Vostro 3350) sda1 disk to my desktop. After some googling I decided to use CloneZilla for that purpose. I have an OpenSSH server installed and running on my desktop. So I inserted CloneZilla CD to CD-rom, booted from it, then chose an option smth like "use ssh server to store image". Then I got an invitation to choose a network interface. I chose wlan0 and entered shell to manualy configure connection. And that's where I got into trouble, for wifi-network which I wanted to use is WPA2-encrypted, and I don't know how to connect to it from command line. Can somebody assist me. Appreciation for advance.

    Read the article

  • Booting from e-sata drive

    - by petersohn
    I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >