Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 531/686 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• Setup for NEW HDD?

  - by Ed Markey

  Building my FIRST computer. Will start with at least - one HDD, I purchased a WD SATA HDD a 10,000RPM VelociRaptor 500GB. I have read that if you use one of the settings, can't remember what it's called, that it would make an HDD rund at IDE speeds??? Could I or should I run it in RAID instead? Is RAID only for more than one HDD/ssd? I would like to get like a 64GB SSD later to maybe speed things up working together. Thanks

  Read the article

• ubuntu doesn't boot without flash drive

  - by Kasisnu

  i just installed ubuntu 11.04 onto this netbook. I had to use a flash key . during the install , i tried putting ubuntu on a separate partition , but it kept showing a 'no root file system is defined'. i didn't really know what i could do to fix it , so i decided to install it alongside windows. i have a windows 7 installation which works perfectly fine. So , the installation goes through perfectly . i give both OS's 40 Gigs of space . The comp restarts and NOTHING !. The computer boots directly into windows. During the install it said i'm supposed to be prompted at boot, and nothing happened. Ubuntu partitioned the C: drive but this partition doesn't show up in windows. If i boot using the flash drive, it shows the partition with the ubuntu installation. I tried reinstalling but now i don't get the prompt to asking me to install ubuntu. Really confused ..

  Read the article

• Red Hat 6.5- sysctl -w net.ipv6.conf.default.accept_redirects=0

  - by kjbradley

  I am in the process of writing a Red Hat 6.5 Kickstart disc with hardened security. I have run a program to determine where the weaknesses are in my system, and apparently there is a medium severity problem by accepting IPV6 redirects. When I implement the following line in my post script in my kickstart, I can't access any websites externally with wget, or ssh/scp in from my computer. sysctl -w net.ipv6.conf.default.accept_redirects=0 Is there a workaround to this so that the system will still be hardened but I will be able to access systems that are external?

  Read the article

• Windows 7 Extend C Volume to Unallocated Space

  - by user327777

  a while back I installed Ubuntu and then later uninstalled it by I think deleting the partitions and recovering the windows 7 boot loader. I am not that experienced with partitioning yet. As you can see here there are two partitions that are now unallocated. The 9gb one is a recovery or something that came with the computer. How can I extend my C partition to use both of those? I do not want to have that much storage just wasted sitting there. Currently when I right click on C and hit extend the wizard pops up but there is no available space to extend. http://i.imgur.com/VxEkdyR.png http://i.imgur.com/DdFZWX9.png Thanks everyone!

  Read the article

• Remote screen control software (such as VNC) with permission mechanism

  - by xuhdev

  Does anyone know a kind of software that allows controlling of other computer, but the server can configure permission control? For example, the server can define five users, one of them can control, but the other four of them can only view. Also, file transfer support is required. I've tried TightVNC, it works fine with anything else, but it just does not support user permission control. RAdmin can serve this job, but I wish to find some software which is free. Thank you!

  Read the article

• Where do I find a free (open source preferably) VNC management tool?

  - by thenior

  Hello, I am trying to get remote internal setup for our business. Basically, I just want to remote desktop into any computer on the network. I don't want to use LogMein, because I only want it to be internal for security. Basically, I am looking for a way to just install VNC clients on all the machines, and on my machine have centralized manager for all the machines that are connected to it. Doesn't have to VNC - just needs to work and be free. All systems running Win 7 64bit

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• Windows 7 spins up HDD when files should be on SSD

  - by ZorroDeLaArena

  I run 64-bit Windows 7 Ultimate off a Corsair 12GB SSD (cmfssd-128gbg2d) and I've got two older HDDs I use for storing media. However even though the operating system and all the programs are installed on the SSD, frequently when I'm starting programs, I can hear the computer spin up one of the HDDs before the app starts and I'm not sure why (and I don't know which drive it is). For programs that should open very quickly - Programmer's Notepad, Calculator (the basic one that comes with Windows), etc. - having to wait several seconds sometimes can be pretty obnoxious. Avoiding wait times like that are why I got the SSD in the first place. Is there any way to tell why that's happening? I'm happy to provide more information but I'm not sure what's important. Any help would be really appreciated!

  Read the article

• HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

  - by henpenben

  So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• How do I switch between Java 7 and Java 6 on mac OS X 10.8.2?

  - by Nikita Jerschow

  I am using Java SE 7 to program simple games for windows and mac, but I have to switch to java 6 to run games such as Minecraft on my computer. This used to work just fine before I updated to Mac OS X 10.8.2 Build 12C60. Before this update I used to be able to open java preferences and check off java 6 or java 7. But now I don't seem to be able to find java preferences. I am running mac OS X 10.8.2 (latest version) Thanks.

  Read the article

• What happened to WinFS?

  - by Console

  The most interesting feature that was ever connected to what eventually became Vista was WinFS, a revolutionary (so it seemed, at least back then) new way of storing and accessing information on a computer. This feature was cut despite actually reaching a closed alpha/technical preview release. There was a smoke and mirrors blog post from MS about the technology living on in an upcoming SQL server release, but to me it just felt like it was axed, hard. Does anyone have any idea what happened to it? Is it killed, or just on the backburner? Was it just impossible to implement, too expensive, or did someone think of a better idea? Are there any projects (From MS or anyone else) that have similar goals?

  Read the article

• Is IMAP (un)subscribe meant to work accross mail clients?

  - by equaeghe

  I read my IMAP-mail on different computers/mail clients. I wanted to unsubscribe from the majority of my folders in Outlook. Later, I noticed that on another computer, where I use Thunderbird, I was also unsubscribed from those folders as well. This is not what I wanted (at all), so I subscribed again under Thunderbird. The effect was that I also got subscribed again under Outlook. So I guess this means (un)subscribing to IMAP folders is an account-coupled thing, not a per-client thing. Is there a way to achieve (un)subscribing per client?

  Read the article

• hp g7-1070us does not post to windows

  - by lexlyn4

  Ok basically my laptop screen is broken and only a small portion of the screen is viewable. When I boot my laptop it gets to a screen where it shows startup/hp.com. That's all I can see because of the screens state. I can enter bios bit again cannot see much. My laptop is an hp g7-1070us and I was thinking of hooking it up to a monitor then going into the bios but that's not possible unless the computer posts to windows. So I don't care about the data all I want is to boot to windows. I'm wondering if I insert a copy of windows,7 and do,a,clean install will,it work. I don't have the cd yet but working on it. I need help please

  Read the article

• Unable to run Django on Mac OS X

  - by cybervaldez

  I'm working with a Django project on my Mac (running Leopard) and I want to show it to my team. I've already passed the neccessary port forwards from my router to my Mac's LAN IP address but it doesn't work. I've also tried running the XAMPP server since that always worked with my Windows XP computer but it still doesn't work. Whenever I type my > it's showing a Page Load Error. Is this possibly an issue with an Mac OS X configuration that I need to setup first to allow my port forwards to get in? It's my first time to do this with Mac, perhaps I need to configure something else in network preferences?

  Read the article

• How do I edit files in the console when connecting to windows 7 via ssh?

  - by Alex Waters

  I am using tunnelier client and server to connect to a windows machine. I can get in and have access to all of the files on the computer. I have vim installed on that windows machine, but I can't seem to edit anything via the DOS command line. I also tried editing in notepad, but nothing happens when I enter the command. I think this might be the part where DOS doesn't behave like bash. Would I need to setup cygwin / openssh to accomplish this? (boo, tunnelier is so easy) Thanks! p.s. I know I could just use sftp and edit files that way, but it feels dirty.

  Read the article

• Run BGInfo At Startup For All Users

  - by slickboy

  I have a Windows 7 image which I intend to deploy across a business. For simplicity I intend to install BGInfo on each machine and have it update each time a user logs in. From what I can see, when BGInfo creates a configuration file, the file contains variables which are local to each account - and therefore the configuration file will only work on the user account that created it. Has anyone any idea as to how make these configuration files 'generic' so that BGInfo will work for all accounts when they log in? At present I have the BGInfor application and a BGInfo configuration file saved on the C drive and I have written a batch file which is stored in the 'All Users/Start Menu/Startup' directory (which executes every time any user on the computer logs in), however this only works for the account which created the configuration file. Thanks for any help.

  Read the article

• Do I have a bad video card?

  - by zooropa

  I think this is the right spot to post this question. Please don't flame me if it isn't. My work computer is a Dell Prescision M6400 laptop. I use the VGA output to a second monitor. There is something wrong with my second monitor's output. Here is a screenshot of my desktop. You can see fragments of the right side of a Windows File Explorer window in the image. Is this a bad video card?

  Read the article

• Computers with Small Capacity SSD - For caching?

  - by RXC

  Recently, in newsletters from websites, I have been seeing computers for sale from manufacturers that include an HDD and an SSD but the SSD has a small capacity like 24 GBs. I don't know if this still holds true, but I learned that when building a computer, you would want to install your OS on your fastest hard drive. I do a lot of PC gaming, so I install my OS and games on my SSD, because I learned that games and many applications make lots of system calls to the OS and performance can only be as fast as the slowest piece. Why these computers come with small capacity SSDs? Most OS's take up around 20 to 30 GBs of space, so what are the benefits of such a small SSD? Are these small size SSDs for caching? and what exactly does caching mean (what does it do and how does it help)?

  Read the article

• Synced audio ouput on multiple machines? VLC? hardware solutions?

  - by zimmer62

  I'm wondering if there is any software or hardware solutions to synced audio or audio and video across multiple computers or devices on a network. I've seen Sonos, and it might be a good solution, but it's also a very expensive solution. I'd like to be able to play something with realtime audio output on one PC, but hear it on speakers throughout the house, being it the home theater receiver, or another computer in another room. I saw a solution using the apple iport express, but the latency was unacceptable for anything other than just music. I'd like to avoid running audio wires with baluns to a bunch of amplifiers scattered all over the place when I have cat5 run everywhere. Is anyone familiar with using this kind of process for whole home audio? The latency is a big deal for me, if I've got video attached to the sound (e.g. watching a hockey game)

  Read the article

• Whats wrong with my keyboard?

  - by Neifen

  I have a new kind of weird problem with my laptops keyboard. To be precise with the shift key. Lately the both Shift-Keys doesn't just make the letters big, they also took role of the 2 and the 7 on the numpad. So when i push the left shift key (with num lock) it also writes a 7. When I use the left shift key (without num lock), the cursor goes to the begin of the line. When i push the right shift key (with num lock) it writes a 2. When I use the right shift key (without num lock), the cursor goes to the end of the line. I really don't know what I changed on the computer... it's really weird and really annoying

  Read the article

• Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

  - by Vortico

  Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

  Read the article

• Cannot find GRUB - Ubuntu/Windows 8 dual-boot

  - by ubeatlenine

  Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

  Read the article

• Windows Server VPN: Error 720

  - by Nikita Zernov

  I want to created vpn server on Windows Server 2012. First I installed Active Directory domain services, then Remote Access server role. Opened Gettng Started Wizard, entered configure just vpn. Then in Routing and Remote access selected Configure and Enable Routing and Remote Access. There selected custom configuration, vpn. Then created user in active directory and allowed network access permission. After this I tried to connect to vpn from windows 8. I get the following error: Error 720: A connection t the remote computer could not be established. You might need to change the network settings for this connection. What should I do?

  Read the article

• How to removeTrojan PB [duplicate]

  - by user266901

  This question already has an answer here: How do I get rid of malicious spyware, malware, viruses or rootkits from my PC? 15 answers How to remove trojan PB from windows 7 system? previously i had installed Norton 360 antivirus. the subscription was expired two months back. Recently i have purchased quick heal total security. while installing quick heal antivirus i get the message 'system infected by Trojan PB' Their is an option to remove Trojan PB by restarting computer. However the infection does not get removed. Please advice for removal of Trojan PB

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >