Search Results

Search found 29619 results on 1185 pages for 'external script'.

Page 531/1185 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• Replacing latex with unicode symbols

  - by Elazar Leibovich

  Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

  Read the article

• Configuring Postfix with other SMTP provider

  - by Eduard Luca

  I want to use SendGrid as my email sending service, but want to also use Postfix's internal queue mechanism to manage the emails sent through Sendgrid. So basically what I want to do is to configure Postfix to send emails through Sendgrid's SMTP, and I will configure my app to send the emails using the local Postfix. My question is, how can I configure Postfix to use an external SMTP? Looked here but didn't see anything useful.

  Read the article

• Why am I getting blank error messages in my Apache error log?

  - by Jason Lamoreux

  I am running Apache 2.2 on 64bit Windows Server 2008 Std edition with ActivePerl 5.8.9. My error log is filling up with blank error messages like these: [Wed Mar 31 14:08:31 2010] [error] [client 10.6.1.164] [Wed Mar 31 14:10:32 2010] [error] [client 10.6.1.89] [Wed Mar 31 14:13:20 2010] [error] [client 10.6.1.131] By looking in the access log I can tell that it occurs when our client machines issue a GET to a very simple Perl script. #!perl.exe use strict; no warnings; $|=1; use CGI::Carp('fatalsToBrowser'); use CGI qw(:standard); print header; my $CRLF = "\r\n<br>"; my $Port = '10116'; print "Success!${CRLF}PollInterval=5${CRLF}LMProMode${CRLF}Version=7${CRLF}ConnectionPort=$Port"; exit; The weird thing is that it does not look like this error message is inserted every time a GET to this Perl script occurs. What could cause this error message to appear in the Apache error log?

  Read the article

• VBScript Capture StdOut from ShellExecute

  - by Joe

  I am trying to run the following code snippet as part of a tool to gather and log some pertinent system diagnostics. The purpose of this snippet is to gather the result of running the command: vssadmin list writers The snippet is as follows: ' Set WshShell = CreateObject("WScript.Shell") ' WScript.Echo sCurPath & "\vsswritercheck.bat" ' Set WshShellExec = WshShell.Exec("elevate.cmd cmd.exe /c " & sCurPath & "\vsswritercheck.bat") Set oShell = CreateObject("Shell.Application") oShell.ShellExecute "cmd.exe", sCurPath & "\vsswritercheck.bat", , "runas", 1 vsswriter = VSSWriterCheck Select Case oShell.Status Case WshFinished strOutput = oShell.StdOut.ReadAll Case WshFailed strOutput = oShell.StdErr.ReadAll End Select WScript.Echo strOutPut vsswriter = strOutPut With the first code snippet (commented out) I can run the command and capture stdout from the batch file. In the second code snipped, I cannot capture stdout. I need to be able to run the batch script with Elevated permissions, so I am looking for a compromise between the functionality of the two. I cannot run the entire calling script in elevated mode due to restrictions from other pieces of functionality. I am looking for any ideas on how to add this output to my log as I am running out of options that are within the scope of basic scripts.

  Read the article

• Dedicated server automatic backup solution

  - by Luigi

  I have a dedicated Ubuntu web server in a cloud environment, and I am looking for a nice way to do automated backups. I would like to backup some directories with web apps, and all my MySql databases. As for destination: make snapshots every two hours localy, and every six hours to a remote ftp server. Also delete backup archives older than seven days(localy + ftp), and notify on any problems by email. Now to achieve some of this functionality I use cron + shell script, and http://www.mysqldumper.net/, but really that doesn't answer my needs. Mysqldumper doesn't know automaticly about new databases, and shell script does not notify on problems. It's something I have to check out from time to time, and i don't have trust for. I googled a while, and seems like most people solve this stuff with shell scripts. Is this a method you can trust? Are there any web-gui tools, I'm missing? Maybe there is a smarter startegy for doing this? I'm a little bit confused.

  Read the article

• Exchange DiskShadow/Robocopy backup does not purge log files

  - by Robert Allan Hennigan Leahy

  I have a series of scripts setup to backup my Exchange. The following command is executed to start the process: diskshadow /s C:\Backup_Scripts\exchangeserverbackupscript1.dsh This is exchangeserverbackupscript1.dsh: #DiskShadow script file set verbose on #delete shadows all set context persistent writer verify {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7} set metadata C:\Backup_Scripts\shadowmetadata.cab begin backup add volume C: alias SH1 create expose %SH1% P: exec C:\Backup_Scripts\exchangeserverbackupscript1.cmd end backup delete shadows exposed P: exit #End of script And this is exchangeserverbackupscript1.cmd: robocopy "P:\Program Files\Microsoft\Exchange Server\Mailbox\First Storage Group" "\\leahyfs\J$\E-Mail Backups\Day 1" /MIR /R:0 /W:0 /COPY:DT /B This is not causing Exchange to purge its log files. The edb file is 4.7 gigabytes, but the First Storage Group folder itself is 50+ gigabytes due to many, many log files for each day going back to 2009. Is there any way -- I've Googled and haven't found anything -- to notify Exchange when I've completed a full backup, and have it purge its log files? According to this and this, end backup should cause Exchange to "flush the transaction logs for that storage group" but only "if a successful backup of a storage group occurred", which leaves my question as: What constitutes a "successful backup", and why is what I'm doing not it?

  Read the article

• stop-play-pause-button-opening-itunes-in-snow-leopard

  - by hotsawz

  First time on here so forgive me if this is incorrect etiquette but I found this post that has been answered but I have a better solution. As the post was answered I could not post on there. The solution is simple. Pressing Option + Shift + (media keys) does not fire up / alert iTunes. I've tried it with VLC and Spotify on an external keyboard with media keys and it works fine.

  Read the article

• In Fedora, Perl program cannot find Time::Piece library

  - by Eric Leschinski

  I have a Perl program named /usr/bin/octbatch running as a script on Fedora 17 Linux. When I run this command: /usr/bin/octbatch I get the error: Can't locate Time/Piece.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /usr/bin/octbatch line 6. BEGIN failed--compilation aborted at /usr/bin/octbatch line 6. Here is the relevant lines of the Perl script: #!/usr/bin/perl -wT $ENV{PATH} = "/bin:/usr/bin:/usr/local/bin"; use strict; use POSIX qw(setsid :sys_wait_h); use Time::Piece; use Time::Local; I have to install Piece.pm so perl can find it. I've already installed it with this command (using the defaults): /usr/bin/perl -MCPAN -e install Time::Piece I have the Piece.pm file in /home/el/perl5/lib/perl5/x86_64-linux-thread-multi/ however when I run the octbatch command I get the same error as above. Like it can't even find it. Here is my PERL5LIB variable: el@defiant ~/gnuoctbluehost/single_stock_analysis $ env | grep PERL5 PERL5LIB=/home/el/perl5/lib/perl5/x86_64-linux-thread-multi:/home/el/perl5/lib/perl5 And the Piece.pm is located under /home/el/perl5/lib/perl5/x86_64-linux-thread-multi So my question is, Why is it not finding my Piece.pm file? And what are the ways I can get the @INC variable to include it. Or how do I make perl see it?

  Read the article

• Laptop stand for better ergonomics?

  - by thelearner

  I have a MacBook Pro but my neck is hurting from looking down all day - is there a good laptop stand I can buy and then get an external keyboard?

  Read the article

• Can I map several physical interfaces to a single vmware vmnet interface?

  - by EricJLN

  I am using a rack mounted device that has 10 Ethernet ports built into it. For 8 of the ports, I would like to bind them to a single vwmare-server-2.0 virtual network interface, so that I can, in effect, use the ports as a hub for the external devices and internal virtual machines. How can I bridge a single vmware vmnet# interface to several physical interfaces?

  Read the article

• Why are group policy preference drive mappings not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. To note: The mappings were applied before the GPO with a login script using the : net use ... command - all was working perfectly and correctly for the domain administrator user as well - That removes sharing and security problem (IMO) My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• How to have your DNS servers forward queries for internet names

  - by Xavier Hutchinson

  I have 2 Domain Controllers / DNS servers on Windows 2012, their IPs are 10.0.1.10 and 10.0.1.11 Another server acts as the DHCP server for clients, and sets their primary and secondary DNS to the IP addresses of the previously mentioned domain controllers / DNS servers. However I cannot resolve internet domain names, presumably as they are not hosted on the DNS servers. So my question is what do I have to do on my setup to resolve external domains? Thank you! Xavier.

  Read the article

• when i try to access website without www. i get access denied.

  - by madphp

  I have an apache web server on a debian machine. Im using virtualmin to administer virtual hosts. I have two sites on this server right now, when i try to access one site without the www in the URL i get an access denied. The other site is fine. The site with the problem is a cakephp app and has the following .htaccess file in the public_html folder. <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> Below is the directives for the problem domain. SuexecUserGroup "#1001" "#1001" ServerName mydomain.net ServerAlias www.mydomain.net ServerAlias webmail.mydomain.net ServerAlias admin.mydomain.net DocumentRoot /home/mydomain/public_html ErrorLog /var/log/virtualmin/mydomain.net_error_log CustomLog /var/log/virtualmin/mydomain.net_access_log combined ScriptAlias /cgi-bin/ /home/mydomain/cgi-bin/ ScriptAlias /awstats/ /home/mydomain/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/mydomain/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/mydomain/cgi-bin> allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} =webmail.mydomain.net RewriteRule ^(.*) https://mydomain.net:20000/ [R] RewriteCond %{HTTP_HOST} =admin.mydomain.net RewriteRule ^(.*) https://mydomain.net:10000/ [R] RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 31 <Files awstats.pl> AuthName "mydomain.net statistics" AuthType Basic AuthUserFile /home/mydomain/.awstats-htpasswd require valid-user </Files>

  Read the article

• Upstart: cannot run as root

  - by Ronni Egeriis

  I have made this upstart script, which starts a Node.js service. But all of the sudden the service has stopped, and upstart has failed to restart it. Now that I am trying to start it manually, it fails to recognize my service: start: Unknown job: queue The script is properly placed in /etc/init, and should have the correct rights: -rw-r--r-- 1 root root 200 Aug 7 13:30 queue.conf When I check the config file with init-checkconf however, it says that it is not able to run as root: root@production1:~# init-checkconf /etc/init/queue.conf ERROR: cannot run as root What causes this error and how do I solve it? Debug info: Ubuntu 12.04.3 LTS root@production1:~# service --version service ver. 0.91-ubuntu1 Edit Here's queue.conf: description "Echo.it command queue" author "Ronni Egeriis Persson <[email protected]>" stop on shutdown respawn respawn 20 5 exec sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 The command sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 works fine when run manually.

  Read the article

• Use Seagate hard drive for both mac and windows

  - by Nick LaMarca

  I recently bought a seagate for mac 1tb external hard drive. When I connect to my macbook through the fire wire it works fine, but I also have media on my dell laptop which is running vista. When I connect the hard drive to that laptop using the usb cable vista doesnt recognize it. What am I doing wrong?

  Read the article

• Chrome caching 302 redirects

  - by Thermionix

  I have a php script with is used to rotate banner images on a site. Under Firefox/IE page refreshes will make another request and a different image will be returned. Under Chrome, the request seems to be cached and only opening the page in a new tab will cause it to actually query the script. I believe this used to work in older versions of chrome, I've tried a few different types of redirect codes all with the same result. Any tips? <img class="banner" src="/inc/banner.php" alt=""> ~$ cat /var/www/inc/banner.php <?php header("HTTP/1.1 302 Redirect"); header("Cache-Control: max-age=0, no-cache, no-store, must-revalidate"); //header('HTTP/1.1 307 Temporary Redirect'); //header("expires: none"); //header("expires: max"); //header("Cache-Control: public"); $folder = '../img/banner/'; $exts = 'jpg jpeg png gif'; $files = array(); $i = -1; if ('' == $folder) $folder = './'; $handle = opendir($folder); $exts = explode(' ', $exts); while (false !== ($file = readdir($handle))) { foreach($exts as $ext) { // for each extension check the extension if (preg_match('/\.'.$ext.'$/i', $file, $test)) { // faster than ereg, case insensitive $files[] = $file; // it's good ++$i; } } } closedir($handle); // We're not using it anymore mt_srand((double)microtime()*1000000); // seed for PHP < 4.2 $rand = mt_rand(0, $i); // $i was incremented as we went along header('Location: '.$folder.$files[$rand]); flush(); ?> curl output; ~$ curl -I -k https://example.net/inc/banner.php HTTP/1.1 302 Redirect Server: nginx/1.1.14 Date: Fri, 24 Feb 2012 03:23:46 GMT Content-Type: text/html Connection: keep-alive X-Powered-By: PHP/5.3.10-1ubuntu1 Cache-Control: max-age=0, no-cache, no-store, must-revalidate Location: ../img/banner/2.jpg

  Read the article

• OpenWRT based gateway with dnsmasq and internal server with bind

  - by Peter

  I have router based on OpenWRT which has dnsmasq 2.59. Inside my local area network I have a NS server bind. This server has internal and external views for a couple of my domains. My router forwards port 53 TCP and UDP from outside IP (router WAN) to this server. For the external clients everything works fine. In order to organize the internal view, I decided to add the exception to /etc/dnsmasq.conf server=/mydomain1.com/192.168.1.1 server=/mydomain2.com/192.168.1.1 server=/mydomain3.com/192.168.1.1 (192.168.1.1 - IP address of the NS server) According to dnsmasq manstrong text: More specific domains take precendence over less specific domains, so: --server=/google.com/1.2.3.4 --server=/www.google.com/2.3.4.5 will send queries for *.google.com to 1.2.3.4, except *www.google.com, which will go to 2.3.4.5 this domain name with all the sub-domains is supposed to be forward to my NS server. Everything works (SOA, NS, MX, CNAME, TXT, SRV etc.) except for A-record: # nslookup -type=a mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 *** Can't find mydomain1.com: No answer 192.168.1.100 - IP address of my router (dnsmasq) However, I can get the answer for the TXT-record query: # nslookup -type=txt mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 mydomain1.com text = "v=spf1 include:mydomain1.com -all" When I just specify the local IP of my NS server (direct access to the server without using dnsmasq) then the results are: # nslookup -type=a mydomain1.com 192.168.1.1 Server: 192.168.1.1 Address: 192.168.1.1#53 Name: mydomain1.com Address: 192.168.1.1 There is a similar situation with the MX-record: C:\>nslookup -type=mx mydomain1.com Server: router.lan Address: 192.168.1.100 mydomain1.com MX preference = 10, mail exchanger = mail.mydomain1.com mydomain1.com nameserver = ns.mydomain1.com mail.mydomain1.com internet address = 192.168.1.1 ns.mydomain1.com internet address = 192.168.1.1 C:\>nslookup -type=a mail.mydomain1.com Server: router.lan Address: 192.168.1.100 *** No address (A) records available for mail.mydomain1.com This is a dig result: # dig +nocmd mydomain1.com any +multiline +noall +answer mydomain1.com. 86400 IN SOA ns.mydomain1.com. hostmaster.mydomain1.com. ( 121204007 ; serial 28800 ; refresh (8 hours) 7200 ; retry (2 hours) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) mydomain1.com. 86400 IN NS ns.mydomain1.com. mydomain1.com. 86400 IN A 192.168.1.1 mydomain1.com. 604800 IN MX 10 mail.mydomain1.com. mydomain1.com. 3600 IN TXT "v=spf1 include:mydomain1.com -all" When I try to ping: # ping mydomain1.com ping: cannot resolve mydomain1.com: Unknown host Is it a bug of dnsmasq 2.59? How to manage this problem?

  Read the article

• Boost Audio Input on OS X?

  - by alanstorm

  I'm using my 13" Mac Book Pro's audio input functionality with an external microphone (recent vintage, bought around Thanksgiving). I've increased my input volume to the maximum in system preference, but the resulting recorded volume (using iShowU HD) is very low. Is there anyway to increase the input volume/sensitivity beyond Apple's default settings? I've found plenty on google about increasing the OUTPUT volume, but I want to increase the input volume.

  Read the article

• Why does a hard disk suddenly look to Windows as if it "needs to be formatted"?

  - by pufferfish

  This is more of a theory question, but what are the reason(s) for a disk to suddenly cause Windows to start saying it "needs to be formatted"? It happens to an IDE disk that I have in a cheap external enclosure, and I can usually get most of the data back by using software like recuva. It's now happened to an internal disk I have. I'm not looking for software to fix this (although links would be appreciated), but rather a low-level explanation as to what gets corrupted on the disk.

  Read the article

• Free, cross-platform screen recording utility

  - by abc

  I am looking for a screen recording (video) utility. Desired features are: It should be free (higher in priority) It should be available for Windows, Linux, and Mac (Mac in lower priority, Linux or Windows will work) It should have mic input facility to record external sound as well as machine's sound. It should have highlighting functionality (lower in priority)

  Read the article

• Why is Wifi data transfer is slow?

  - by Ali Azam Rana

  I have a wifi router which was attached with my modem, and the pc was connected to the wifi router through an ethernet cable. Yesterday I moved my modem and router to another room and connected my PC with wifi through an external wifi usb dongle (tp-link tl-w722n). I noticed that the file transfer speed from my cell to PC via wifi is greatly affected. I am not clear why is this happening because although PC is now connected through wifi but the dongle supports more than 54Mbps which is still enough.

  Read the article

• mod_rewrite REQUEST_FILENAME doesn't contain absolute path

  - by Paul Dixon

  I have a problem with a file test operation in a mod_rewrite RewriteCond entry which is testing whether %{REQUEST_FILENAME} exists. It seems that rather than %{REQUEST_FILENAME} being an absolute path, I'm getting a path which is rooted at the DocumentRoot instead. Configuration I have this inside a <VirtualHost> block in my apache 2.2.9 configuration: RewriteEngine on RewriteLog /tmp/rewrite.log RewriteLogLevel 5 #push virtually everything through our dispatcher script RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^/([^/]*)/?([^/]*) /dispatch.php?_c=$1&_m=$2 [qsa,L] Diagnostics attempted That rule is a common enough idiom for routing requests for non-existent files or directories through a script. Trouble is, it's firing even if a file does exist. If I remove the rule, I can request normal files just fine. But with the rule in place, these requests get directed to dispatch.php Rewrite log trace Here's what I see in the rewrite.log init rewrite engine with requested uri /test.txt applying pattern '^/([^/]*)/?([^/]*)' to uri '/test.txt' RewriteCond: input='/test.txt' pattern='!-f' => matched RewriteCond: input='/test.txt' pattern='!-d' => matched rewrite '/test.txt' -> '/dispatch.php?_c=test.txt&_m=' split uri=/dispatch.php?_c=test.txt&_m= -> uri=/dispatch.php, args=_c=test.txt&_m= local path result: /dispatch.php prefixed with document_root to /path/to/my/public_html/dispatch.php go-ahead with /path/to/my/public_html/dispatch.php [OK] So, it looks to me like the REQUEST_FILENAME is being presented as a path from the document root, rather than the file system root, which is presumably why the file test operator fails. Any pointers for resolving this gratefully received...

  Read the article

• Why is my extended desktop configuration being reset after a reboot with Kubuntu 10.04?

  - by Graeme Donaldson

  I'm running Kubuntu 10.04 x64 on a Lenovo ThinkPad R500, with an external monitor attached. If I configure extended desktop, everything works fine. The settings look like this: After a reboot, these settings are reset and both screens are mirrored. The settings look like this: I had my extended desktop working just fine under Ubuntu/GNOME, so I'm assuming there's something different about how KDE handles this config, I just can't seem to find the answer. Anyone know how to get my configuration to stick?

  Read the article

• Win XP error 0x80041003 using GetObject/winmgmts

  - by John Lewis

  My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >