Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 533/2753 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• IBM storage ds3400 Cant connect to management using fiber

  - by Eli B

  i have a problem with a DS3400 IBM storage system we bought a few years back. when i try to manage the storage using its IBM storage management i cant find it using automatic detection even though its connected directly using the fiber and i can see the Logical drives connected and working properly. when i tried to connect the two management Ethernet wires and manage the storage directly by entering the IP address manually i am able to connect however after i make several changes to the controller configuration one of the controllers stops responding and i am not able to ping it directly (since you cant make any changes without being connected to both controllers this is a problem) whats more bizarre is that when i change the IP of the controller that doesn't respond it starts working .. i have found some articles over the web explaining stuff about LUN31 being missing and causing similar problems however all my attempts to manually configure it failed . *link to an example http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5075711 in short im trying to get my storage to appear in the storage manager when directly connected using only the fiber cable directly attached. thanks in advance

  Read the article

• How to open first n bytes of file in hexadecimal and edit it?

  - by Larssend

  I want to edit some .avi videos (cut them, to be precise) in VirtualDub but it failed to open the files. They are encoded in xvid, which I have installed, and play in KMPlayer without problem. Also, all other xvid videos can be opened and cut just fine by VirtualDub. I suspect there's something wrong in the first few bytes of these particular videos (the magic number?). This means I have to open the offending files in a hex editor and make some necessary adjustments to the header. Problem is, they are very large ( 3 GB each) and take very long time to open in UltraEdit. Can UltraEdit open just the first few bytes of a file? If not, do you know of an application that can do that? Edit: I'm using Windows XP.

  Read the article

• How do I unmount a tmpfs that is missing from /etc/mtab?

  - by vrinek

  I have the following line in /etc/fstab: none /home/hydra/tmp tmpfs user,noauto,size=1000M,uid=1001,gid=1001 0 0 I can do mount ~/tmp as user hydra and it gets mounted ok. The only problem is that even thought it gets added to /proc/mounts, it does not get added to /etc/mtab. When I try a umount ~/tmp (again as hydra) it complains: umount: /home/hydra/tmp is not mounted (according to mtab) And when I try -f or -n, it complains that I am not root. Some more info on the system that manifests this problem: On sudo umount /home/hydra/tmp, the fs gets unmounted (I think I needed to used -f too) Debian version is testing mount --version - mount from util-linux 2.19.1 (with libblkid and selinux support) ls -l /etc/mtab - -rw-r--r-- 1 root root 921 Nov 14 09:08 /etc/mtab cat /proc/mounts | grep rootfs - rootfs / rootfs rw 0 0 /home, /home/hydra nor /home/hydra/tmp are symbolic links

  Read the article

• Need Help with fixing permissions in mounted Drive

  - by Master

  I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

  Read the article

• Fax in Small Business Server 2003 fails to hang up

  - by Tim Anderson

  We have a problem with fax in SBS 2003. External modem, Courier v Everything which is a recommended model. It receives a fax OK, but then sometimes (quite often) fails to hang up. Attempts to send faxes thereafter get an engaged tone. The only fix when this happens is to reset the fax modem. Even restarting the server is not enough. We've tried with a different model modem, same problem. Any ideas? Tim

  Read the article

• SNMP keeps crashing

  - by jldugger

  We're using OpsView/Nagios to monitor our servers. We've added the SNMP service to all our servers and deployed the configuration via GPO, but one win2k3 server seems to have a problem; it crashes pretty regularly. The event log carries messages like: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7034 Date: 6/11/2009 Time: 7:11:49 PM User: N/A Computer: HOSTNNAME Description: The SNMP Service service terminated unexpectedly. It has done this 2 time(s). and also Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 6/11/2009 Time: 7:11:18 PM User: N/A Computer: HOSTNAME Description: Faulting application snmp.exe, version 5.2.3790.3959, faulting module ntdll.dll, version 5.2.3790.3959, fault address 0x000417af. Now, I could probably set it to simply restart on crash in perpetuity, but I think it's better to fix problems like this. Is this a known problem? If not, what should I do to diagnose it?

  Read the article

• Login on VMWare XP guest machine keeps locking user AD account

  - by mark

  Environment: Windows 2003 AD Host: Windows 7 Pro VMWare Guest: Windows XP I use a normal user but I also have AD Admin rights (via another user). I use my AD account to login on the host as well on the aforementioned guest system. They don't share their profiles, so no problems here. I had reason to change my user (AD) password. When I did this, the guest was suspended but my user was logged in. A few days after my password change I resumed the guest. I was able to work but couldn't access networked mapped drives. I logged out and tried to log in again. At this point I realized that I initially was logged in with a user from a point before I changed my password. I logged in again with the new password, but then things went bad. I was able to successfully log in to my XP guest, however once that was completed, my AD user account got locked. This now also affected my user on the host. I was able to unlock the account, but there is still this problem: I log in via my new password into the guest and then my AD account gets locked. I'm successfully logged into the guest, but I can't access network shares from the AD server. If I don't unlock my account on the AD server, I will get further problems with my AD user. I tried multiple things, none worked: removed XP guest from AD, deleted all users, even my XP AD user profile on the guest, added machine to the AD, logged in - log in successful, account locked I resumed an older state of my guest (sometimes from the last year even) but the problem still persists. I tried this with disabled networking when the old machine state is resumed and so on, but no luck. It seems to me, although only my account is locked, this is somehow connected to the guest machine itself. I really want to avoid re-installation. This guest image was my old workstation which I virtualized once I moved to W7 pro and thus is still very valueable or me. I can work locally on the guest once logged in, but I can't access any network shares which is a problem. thanks

  Read the article

• MySQL on a laptop for remote workers - MyISAM keeps corrupting

  - by Jonathon

  We have an application that is used by remote, mobile workers. It intalls WAMP (Server2Go) on a laptop and uses MySQL to store data locally. All tables are MyISAM. Once a day, the workers sync the database to our central server via HTTP scripts that query the data and post it to our site. The problem is that many of these laptop database tables are corrupting continually. It appears that MySQL acts like it saves the information (I don't get any query errors), but the table gets corrupt. I have to repair the table constantly (which removes several rows of data in the process). Does anyone have any ideas about how to work around this problem? Would it be wise to switch to InnoDB on the laptops? How about a different database system altogether. I have looked at MySQL Embedded, but it appears to be the same engine as the regular MySQL.

  Read the article

• XP shared folders not accessible after BIOS changed

  - by stijn

  Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

  Read the article

• Limited connection whenever I connect to a Wi-Fi network outside the company

  - by anderZubi

  Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

  Read the article

• How reduce size of PPT 2010 Notes Pages PDFs?

  - by KnowItAllWannabe

  I have a PPT presentation of about 400 slides that I periodically update and publish as PDF. The view I publish is the Notes Pages. This worked fine for several years, during which time I was using PPT 2002. I recently upgraded to PPT 2010, and now I find that the PDFs I create are about 25 times bigger than they used to be, and the text in the slides part of the Notes Pages is no longer selectable in Acrobat. According to Why does Powerpoint 2010 print notes pages to PDF as raster images? , the problem is that PPT 2010 is rendering the slides' content as images, which is not what earlier versions of PPT did. The solution offered in that discussion involves Office Automation and VBA, neither of which I know anything about, and it's not clear whether that approach solves the problem of the text in the slides not being selectable in the PDF. Isn't there a simple way to get PPT 2010 to print Notes Pages to PDF the way it did in PPT 2002?

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• How can we control the device driver load order in Windows XP ?

  - by Deniz

  We are trying to install both an HP scanner and a Kodak scanner on an XP machine and the problem is that that HP's scanner driver always places itself into the first and default scanner device position. We are using an automation software on that machine which must use the Kodak scanner as the default scanner. The HP flatbed isn't needed to be the default scanner on that machine. It will always be used manually and through its own software. Our developers did some research 2 years ago couldn't find a solution. Nowadays we are preparing to expand our user base and this problem did surface again on machines with the same configuration. I did a more aggresive search pn the net and found some tips like this one : http://support.microsoft.com/kb/115486 I couldn't realize how to suit this solution to my scenario. Could someone please point me to the right direction ?

  Read the article

• UAE and the mysteries of unreachable websites

  - by 0plus1

  I write here because I'm really lost, please stay with me because it's not easy to explain. A company asked me to set-up a private server, now I'm a programmer so I got a solution with technical support and cpanel which helped me to setup everything and it's working smoothless. I'm by no means a professional sysadmin, but I have a fair knowledge of server configurations, but this problem is way over my knowledge, and apparently way over the knowledge of most sysadmins, I really hope that here I'll find someone with enough experience to help me or at least give me more insight. Now this company for which I'm consulting operates in the UAE (United Arab Emirates) and from there the server is almost unreachable. It started with ns not registering in the UAE, after a week that sorted itself out and now the site is indeed reachable, but it takes almost 2 minutes to load a webpage with one line of text. Emails go in timeout. The domain currently parked there has been bought appositely for tests, the main one that was supposed to go there, after a catastrophic week has been transferred to a shared hosting solution in the UK, and from there it works like a charme. Now after doing some research I discovered that I'm not alone in this, there are several reports of webmasters discovering that their website is not reachable inside the UAE, and mind this has nothing to do with the state-wide block of questionable sites, because in that case an error message appears, this seems to be related to the infrastructure of the UAE, which apparently reroutes everything through their own "fake" internet. Apparently new servers with their own IP are not recognized (yet?) by the UAE infrastructure, while shared hosting solutions seeing that they operates tons of other websites are more likely to be part of the UAE network. Now my questions are: 1) Has someone a real explanation for this? The only thing I can think of is that the server is on a new IP that is not yet recognized by the UAE, but that doesn't explain why it loads (even if after 2 minutes). I don't have any help from within the UAE as the only people that are "experts" are questionable companies that simply try to sell their own services. 2) If there is really some kind of block of new servers, is it possible to know before if a server is reachable from within the UAE, currently this is not a ns problem as even accessing the server with its IP result in a 2 minute wait. 3) Can it be that the problem lies somewhere else? There are some tests that I can perform? I'm not physically in the UAE, but I can ask the people there, or use teamviewer. Could it be some misconfiguration on the server (mind that the site works EVERYWHERE else in the world). Thank you for ANY kind of help

  Read the article

• IE does not send NTLM domain

  - by Buddy Casino

  I have a problem with NTLM single-sign-on with IE8. We've got multiple domain controllers and users from multiple domains that we try to authenticate to a web application via NTLMv1 passthru. Somehow IE fails to send the user's domain in the NTLM Type 1 message. This has the effect that the webapp can not match users properly to their domain controllers, resulting in failed logon attempts, because a user from domain X tries to authenticate to domain controller Y. This problem does not occur with Firefox, as it always sends the correct domain header. So: how do I get IE to send the domain in the NTLM header?

  Read the article

• Data drive disappearing.

  - by Mike Keller

  We have a Windows 2003 R2 server with SP 2 here that randomly loses a partition. There are two partitions the C: and the D: (the one that disappears). When I go into Disk Management the space shows available on the drive but that it isn't formated. There are two drives that are set up in a RAID 1 array. There isn't anything sticking out in the event log as to something triggering this problem and thank god we do daily backups of the data, but it gets kind of annoying to have to go back in there and reformat the partition and restore the data. Any places I can poke around to find the cause of this or even better solutions to the problem would be appreciated.

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• ORA-01019 error only as an administrator

  - by Mike

  I'm having a strange problem. I've installed the Oracle 10g client on a terminal server running Windows Server 2008R2. When I try to connect to Oracle, using, say, Toad, I receive the error "ORA-01019 unable to allocate memory in the user side". But this only happens if I'm logged in as an administrator. If I connect as a normal user, I can connect without issue. Also -- if a normal user is connected, I can then connect without a problem as an administrator. Any thoughts?

  Read the article

• "Thunderbird is already running" error every time I try to start Thunderbird, even if it is not running

  - by Robert

  I cannot open Thunderbird. The process isn't running, but when I click on the icon, I get the the following error: Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Thunderbird process, or restart your system. I've tried the following: Ending the task in Task Manager Deleting parent.lock Uninstalling Thunderbird Uninstalling Firefox Running Thunderbird in software "safe mode" and Windows safe mode What can I do to fix this problem? The problem looks more serious than expected. I do not see any Mail folder in my profile at C:\Users\your-username\AppData\Mozilla\Thunderbird. I think I lost my email.

  Read the article

• Can't Create New folder in my video folder

  - by tiki

  My OS is windows 7 Ultimate 32bit. My video folder location is C:\Users\User\Documents\Downloads\Video. I Can't create folder in the Video folder or see the files i saved. But I can see the files in the root location of the folder i.e by going to the folder from My Computer. I can create and find files when I go to the folder My Computer>C>Users>User>Documents>Downloads>Video. This is an unusual problem I have never seen. Even being a system Administrator I can't able to fix the problem. Please help me out. Thanks in advance

  Read the article

• ICQ offline messages (do not show up)

  - by Nils Riedemann

  Hi there, I have a weird problem with offline messages: I use Adium on 2 Macs (home and office) and Beejive (iPhone) for connecting to ICQ and other protocols. When someone sends me an offline messages I expect them to show up the next time I login with any of my 3 devices. But thats not the case. Recently some show up at the office, some at home and some on my iPhone – couldnt figure out any logic behind it, seems rather random. I thought for a while that it depends on the last device i have been logged in with. But thats not the case either. A friend can send me offline Messages during the weekend, i can login with my Mac at home or iPhone, yet in some cases it only shows up when logging in from office. Weird. It really freaks me out – and no, i can't make 'em go to jabber or the like. Anyone experiencing a similar problem?

  Read the article

• Win7 OpenSSH config: no address associated with name

  - by Jonah

  I am using OpenSSH on win7. My home dir is C:\Users\JG, and inside that dir I have the file C:\Users\JG\.ssh\config, with these contents: Host <redacted server ip here> HostName digitalocean_git User git IdentityFile ~/.ssh/digitalocean_moocho/id_rsa The id file pointed to by the "IdentityFile" entry works, as I use it just fine via putty, but for this problem I am trying to get command line OpenSSH working. The crux of the problem is explained by this output: >ssh -v digitalocean_git OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Reading configuration data /c/Users/JG/.ssh/config ssh: digitalocean_git: no address associated with name Why is no address associated with the name? How can I make this work?

  Read the article

• Flash video for Windows/VirtualDub/media player

  - by acidzombie24

  I don't want to install any codec packs because I remember the last time I did it unwanted results occurred. (I think a codec didn't play nice with an application and was a known problem with the codec. I think). I would like to open up Flash videos (.flv) in VirtualDub. I have a plugin for VirtualDub I just need the codec now. I tried putting DLLs into the VirtualDub folder but that didn't solve the problem. How can I get a codec for VirtualDub to use to decompress Flash video files?

  Read the article

• Darwin Streaming Server Interval Role

  - by Asmv9

  I want to use the Interval Role in Darwin streaming server,more specifically i want to call the QTSS_SetIntervalRoleTimer() when the server starts streaming a video file.But i have problem in doing this as from what it seems,the method returns QTSS_Err when i do that. I believe that the problem is due to the fact that the callback is made in a a module-created thread. Is there a specific place where this callback must be done?(if i put the callback in the register role of my module it works,but i dont want this,because i dont want the timer starting when the server starts).Any help will be useful,thank u in advance.

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >