Search Results

Search found 22358 results on 895 pages for 'django raw query'.

Page 535/895 | < Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >

• How do I configure an ordinary TV remote control to work with lirc on Linux?

  - by Allan Lewis

  I am running MythTV on Ubuntu 9.10 and I would like to use a TV remote to control it. I know that lirc needs a configuration file for the remote, but none of my remotes is in the official database. If I point a remote at the receiver on my TV card (a Pinnacle PCTV "Solo", model 72e) and press a button, dmesg logs the code generated by the remote, so I assume I just have to make a config file with a list of commands assigned to these codes. I've read a few how-tos but I still don't understand exactly how to create the config file. Some of the guides I've read refer to IR receivers on TV cards working at a "higher level of abstraction", which I take to mean that they decode the signal and provide a code, like the ones I can see in dmesg, rather than just giving raw data, but none of them explain where to go from there! Any help would be greatly appreciated!

  Read the article

• How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

  - by N Rahl

  I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

  Read the article

• Is it possible to configure simultaneous authentication against 2 different AD domains by IIS 7?

  - by just3ws

  Basically, I need to be able to attempt to authenticate against two different AD domains from IIS. I'd like to be able to automatically query both AD's and whichever comes back with an authentication wins. The users are completely separate and will only exist in their respective domain.         IIS           |           |   /-------------\   |                 |  ------        ------  AD1         AD2  JoeU        AmyU  JillU         JohnU So, if IIS requests to authenticate JoeU it will query both domains. JoeU will be found in AD1 so we can ignore whatever response comes back from AD2. Is this even possible using stock IIS 7? Is there a middleware or something to allow this type of configuration on IIS 7? Would this be a job for some kind of middleware sitting between IIS and the AD domains?

  Read the article

• DB2 LUW tools for diagnosing issues when the stuff hits the fan

  - by Ichorus

  I am no DBA and very much a novice when it comes to DB2 so even 'obvious' answers are welcome to this question: I love db2top but sometimes I cannot get it to run if the load average is high on a db2 LUW. This morning I was looking at an issue where load average shot up suddenly, I could not get db2top to come up and I needed to find out what was happening. What can I do to find out who is doing what in this situation? I suspected a horribly bad query was being run by someone...is there a good way to find information on poor performing SQL on the fly in that type of situation? Are there any good ways to collect good, actionable stats who/where bad sql is coming from in the event that load average is so high? I know about db2pd but I am not sure how to use it effectively and slogging through tens of thousands of lines of raw data is probably not the most efficient way to get at the heart of a problem. Any tips or resources?

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• Can not boot CentOS VM using VirtIO in KVM

  - by Jake

  I converted qcow2 image to raw and changed I/O bus to VirtIO for a VM. now I can't boot that VM. I Installed VirtIO driver with following command: mkinitrd --with virtio_pci --with virtio_blk -f /boot/initrd-$(uname -r).img $(uname -r) and these are related kernel modules: virtio_balloon 11329 0 virtio_blk 11593 3 virtio_pci 11845 0 virtio_ring 8513 1 virtio_pci virtio 9541 3 virtio_balloon,virtio_blk,virtio_pci and this is what happens during boot-up. I also changed /boot/grub/device.map from "(hd0) /dev/sda" to "(hd0) /dev/vda" but problem still exists. any ideas how to fix this ? This is my default option to boot: title CentOS (2.6.18-308.13.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-308.13.1.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-308.13.1.el5.img

  Read the article

• Video from vhs via USB capture device on Linux

  - by Juanlu001

  I want to transfer video from a VHS tape to my computer with Arch Linux, using a USB capture device that comes with Roxio Easy VHS to DVD, which I recently bought. I tried to plug in the device, and it was properly recognized. From /var/log/messages.log, em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video1 em28xx #0: V4L2 VBI device registered as vbi0 Is there any software that enables me to capture video coming from this device? I don't mind if it is console or GUI based.

  Read the article

• How to recover the plesk database?

  - by Kau-Boy

  When I try to launch the Plesk administration page of you server I get the following error: ERROR: PleskMainDBException MySQL query failed: MySQL server has gone away The MySQL Server is working well. Although it seems that the plesk database is somehow corrupt and any action on this database results in a restart of the mysql process, so even queries to other databases on the same MySQL server will be lost. If I try to connect to the plesk database using phpMyAdmin, I can only see the number of tables, the database had originally. But I am not able to open the tables listing. As soon as I try it, the mysql process crashes again. Trying to connect to the database using ssh works. I can even run a SELECT statement against any table an get a result. I don't know if it is an plesk error or an error of the psa database or even the MySQL server. Can you give me any tips on how to recover the plesk system. Should I try to repair the Plesk installation before. And if so, how can I do it and will all my settings get lost doing it? EDIT: Trying to dump the database, I get the following error: mysqldump: Got error: 2013: Lost connection to MySQL server during query when using LOCK TABLES

  Read the article

• Running Python scripts in a browser

  - by sunwukung

  I want to start learning Python - and I'm having trouble getting scripts to load up in a browser (using Wamp). So far I've tried the following: 1: add the following lines to httpd.conf: AddHandler cgi-script .py Options ExecCGI I navigate to localhost/path/to/script/myscript.py but get an Internal Server error. 2: downloaded mod_wsgi-win32-ap22py26-3.0.so - renamed to mod_wsgi (running Wamp with Apache 2.2) added the following lines to httpd.conf AddHandler mod_wsgi .py WSGIScriptAlias /wsgi/ "path/to/my/pythonscripts/folder/" but when I navigate to the script - it renders the script in it's entirety i.e. #!c:/Python26/python.exe -u print "hello world" I managed to get CherryPy working, but ideally I want to learn the language in a relatively raw context before digging into a framework. Can anyone give me some pointers?

  Read the article

• Google Chrome doesn't delete my browsing history correctly

  - by Derfder

  I have deleted everything that I could from my browser history: chrome://settings/clearBrowserData I checked everything and select the begining of time Then when I access browsing history: chrome://history/ There is nothing (as I expected), or to be precise No history entries found. The problem is that I still see my specific search url with very specific query I have made a month ago, when I start typing the url of the website into chrome address bar. How is that possible? Where is Google stroing these data. How to get rid off them completely? I want to mention that my autosuggestion options look like this: So, what else should I delete to remove everything from autosuggestions? Right now it has some specific URLs (subpages, pages with very specific search query I have made in a month or so). I have tried restarting Chrome and restarting my computer, but the urls are still in the autosuggestion. Also I am unable to turn off the autosuggestion, even I have unchecked that option in settings. My Google Chrome version is: Version 27.0.1453.116 m (probably the latest) Btw. in Firefox deleting the history works as expected. So, I guess that this has nothing to do with the operating system I am using (Windows 7), but only it's an issue with Chrome itself.

  Read the article

• Creating Active Directory on an EC2 box

  - by Chiggins

  So I have Active Directory set up on a Windows Server 2008 Amazon EC2 server. Its set up correctly I think, I never got any errors with it. Just to test that I got it all set up correctly, I have a Windows 7 Professional virtual machine set up on my network to join to AD. I set the VM to use the Active Directory box as its DNS server. I type in my domain to join it, but I get the following error: DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "ad.win.chigs.me": The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.win.chigs.me The following domain controllers were identified by the query: ip-0af92ac4.ad.win.chigs.me However no domain controllers could be contacted. Common causes of this error include: - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. It seems that I can talk to Active Directory, but when I'm trying to contact the Domain Controller, its giving a private IP to connect to, at least thats what I can make out of it. Here are some nslookup results. > win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Non-authoritative answer: Name: ec2-184-73-35-150.compute-1.amazonaws.com Address: 10.249.42.196 Aliases: win.chigs.me > ad.win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Name: ad.win.chigs.me Address: 10.249.42.196 win.chigs.me and ad.win.chigs.me are CNAME's pointing to my EC2 box. Any idea what I need to do so that I can join my virtual machine to the EC2 Active Directory set up I have? Thanks!

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• Cascade rewriting with special characters

  - by Korjavin Ivan

  I have this .htaccess RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php All queries send to index.php. In my site, I have this link: http://site/search/?v[1]=myid it work nice, I think index.php handle it. But now I want to more readable name for this link, something like http://site.si/byid_$myid.html I tried # RewriteRule ^byid_(.*).html$ search/?v\%5B1\%5D=$1 [NC,PS,NE] #escape and urlencode # RewriteRule ^byid_(.*).html$ search/?v%5B1%5D=$1 [NC,PS,NE] #urlencode # RewriteRule ^byid_(.*).html$ search/?v[1]=$1 [NC,PS,NE] #raw RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php Each of this lines kills rewriting, all requests return 500 error. Where is my fault?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• RAID Read/Write Speed Gradually Slows

  - by Nalandial

  This is actually a server at home, but I felt it was sufficiently complicated as to not have it on SuperUser and could easily apply to a professional situation. I have a file server running Debian (Lenny 5.0.4), and it has an XFS LVM on top of a RAID 5 with the OS drive separate from the RAID. It's also running apache, samba, and postgresql. Side note: before anyone asks, I'm using RAID5 because I get more bang for the buck on raw drive space, and still have some fault tolerance. When the box is started (via shutdown or reboot) reading/writing to it's samba share maxes out the gigabit network connection. Over time, this slowly degrades eventually becoming < 10MB/s; however, when rebooted the speed returns to maxing out the connection. Why is this happening, and is there a way to 'clear' out whatever's causing it without taking the server down? Thanks in advance!

  Read the article

• wsgi - narrow user permissions.

  - by Tomasz Wysocki

  I have following Apache configuration and my application is working fine: <VirtualHost *:80> ServerName ig-test.example.com WSGIScriptAlias / /home/ig-test/src/repository/django.wsgi WSGIDaemonProcess ig-test user=ig-test </VirtualHost> But I want to protect my files from other users, so I do: chown ig-test /home/ig-test/ -R chmod og-rwx /home/ig-test/ -R And application stops working: (13)Permission denied: /home/ig-test/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Is it possible to achieve what i'm doing with wsgi? If I have to give read permissions to some files it will be fine. But there are files I have to protect (like file with DB configuration or business logic of application).

  Read the article

• Rackspace Cloud Sites: Compute Cycles exploding. Very expensive

  - by Jaap

  Since last week my compute cycles (CC) went through the roof (Rackspace Cloud Sites). Normally I stay under the 10,000 cycles per month . Now this month I already have more than 75,000 compute cycles. I don't have more visitors and I did not change anything in the code. I looked in the raw log files, that didn't help either... This explosion of CC already costs me more than 750 USD right now. And still counting. Anyone know what to do? I have contacted Rackspace last week. But still no solution/answer.... Looks like Rackspace is liking the money! Help! Thanks.

  Read the article

• dig lookup different from system lookup

  - by simao

  Hello, I am running dd-wrt and I configured it's dns server to resolve a few hosts inside my network. When I use dig to lookup these hosts, they are resolved OK, but when I try to ping those hosts I always receive an unknown host error message. For example: obe:~ simao$ dig dd-wrt ; <<>> DiG 9.6.0-APPLE-P2 <<>> dd-wrt ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44026 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;dd-wrt. IN A ;; ANSWER SECTION: dd-wrt. 0 IN A 192.168.1.1 But then: obe:~ simao$ ping dd-wrt ping: cannot resolve dd-wrt: Unknown host Any ideas? Thanks.

  Read the article

• S.M.A.R.T - Predictive Failure Count

  - by Bastien974

  I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk : Enclosure Device ID: 252 Slot Number: 6 Enclosure position: 0 Device Id: 14 Sequence Number: 2 Media Error Count: 32 Other Error Count: 0 Predictive Failure Count: 18 Last Predictive Failure Event Seq Number: 8119 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.464 GB [0x22cee000 Sectors] Firmware state: Online, Spun Up SAS Address(0): 0x5000c50042c319c9 SAS Address(1): 0x0 Connected Port Number: 5(path0) Inquiry Data: IBM-ESXSST9300653SS B6336XN04HC10525B633 IBM FRU/CRU: 81Y9671 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :33 Celsius What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state. Media Error Count: 32 Predictive Failure Count: 18 Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

  Read the article

• Apache+FastCGI Timeout Problem

  - by Sadjad Fouladi

  Hi all. I've recently installed mod_fastcgi and Apache 2.2. I've a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke "mysite.com/test.fcgi" I see "Internal Server Error" message after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] I'm very confused, please help me! [Sorry for my poor English!]

  Read the article

• Oracle Advanced Security Options is Blank

  - by mak4pi

  I just installed Oracle DB 10gR2 with Oracle Advanced Security, but cannot see the algorithms. [user@db-1] adapters Installed Oracle Net transport protocols are: IPC BEQ TCP/IP SSL RAW Installed Oracle Net naming methods are: Local Naming (tnsnames.ora) Oracle Directory Naming Oracle Host Naming Oracle Names Server Naming Installed Oracle Advanced Security options are: Where are all the algorithms for Oracle Advanced Security options please? I checked the $ORACLE_HOME/bin/adapters file and it's looking for naea256i, naemd5i, etc. in the naetab.so file, but none of these are listed in the naetab.so file. What's wrong with the naetab.so file? Thanks.

  Read the article

• Substiting a line through PHP in SSH

  - by Asad Moeen

  I've already setup SSH usage in PHP and most of the things work. Now what I want to do is that I'm looking to edit a line in a file and replace it back. It works directly on the server but can't seem to get it working with PHP files. Here is what I'm trying. $new_line1 = 'Line $I want to add - The $I has to go into the file as it is'; $new_line2 = 'Ending $text of the line - $text again goes into file; $query = "Addition to line"; $exec1= 'cd /root; perl -pe "s/.*/' ; $exec2= '/ if $. == 37" Edit.sh > Edited.sh'; $new="$exec1$new_line1$query$new_line2$exec2"; $edit="cd /root/mp; cp Edited.sh Edit.sh"; echo $ssh->exec($new); echo $ssh->exec($edit); Now the thing is that running the perl command directly in SSH works without any errors but when I run this through PHP I get the error: Substitution replacement not terminated at -e line 1. I want to know why would it work this way and not that?

  Read the article

• Why does a zip file appear larger than the source file especially when it is text?

  - by PeanutsMonkey

  I have a text file that is 19 bytes in size and having compressed the file using zip and 7zip, it appears to be larger. I had a read of the question on Why is a 7zipped file larger than the raw file? as well as Why doesn't ZIP Compression compress anything? but considering the file is not already compressed I would have expected further compression. Attached is a screenshot. EDIT0 I took the example further by creating a file that contained random data as follows dd if=/dev/urandom of=sample.log bs=1G count=1 and attempted to compress the file using both zip and 7zip however there were no compression gains. Why is that?

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• Sending UDP/514 data magically appears in syslog without rsyslog running

  - by ale

  I’m using a programming language without a library to log to rsyslog over UDP. I thought I was going to need to write a library but I discovered something weird. If I send data on UDP/514 with the port open on the server then the data appears in the server’s syslog. rsyslogd isn’t running so syslog isn’t doing this. Data doesn’t get formatted into a syslog message so rsyslogd really isn’t doing this (only raw text enters syslog). Linux must see the data coming in on this port and know that it should go into /var/log/messages? If I do the same on another port (e.g. UDP/515) then nothing appears in the log! What is doing this? Some CentOS feature? The kernel?

  Read the article

< Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >