request filtering - Page 537

Localhost stop resolving/serving local site after a few clicks IIS 7.5

- by Jo-Pierre

previously I have searched tried to find the answer from a previous question, however Im not sure it was resolved. I could comment on the question to find more, so decided to post a new question. Previous question found (http://serverfault.com/questions/314333/localhost-stop-resolving-after-a-few-minutes-iis-7-5) So I set up a new website on Windows 7 IIS 7.5 ... I give it a host header and in the hosts file I add the entry for 127.0.0.1 and browse the site. After about the second or third time of trying to click around on the local site, it starts hanging ... just seems to be looking like its trying to load, but just eventually comes back in Firefox with "The connection was reset" (takes about 30-50 secs before this happens). I then used a program like CurrPorts, to view the ports that are listening, and for the initial request it all seems good. Now after the site is hanging, I dont see the hit coming through anymore. Its as if the browser loses touch with IIS or something. If I open a different browser, works fine for about 2 clicks or so, then same problem. Anyone know what could be causing this? Or how to resolve?

Read the article

Apache displays error page half way through PHP page execution

- by Shep

I've just installed Zend Server Community Edition on a Windows Server 2003 box, however there's a bit of a problem with the display of a lot of our PHP pages. The code has previously running under the same version of PHP (5.3) on IIS without any issues. By the looks of things, Apache (installed as part of Zend Server) is erroring out during the rendering of the page when it comes across something it doesn't like in the PHP. Going through the code, I've been able to get past some of the problems by removing the error suppression operator (@) from function calls and by changing the format of some includes. However, I can't do this for the whole site! Weirdly, the error code is reported as "200 OK". The code snippet below shows how the Apache error HTML interrupts the regular HTML of the page. <p>Ma quande lingues coalesce, li grammatica del resultant lingue es plu simplic e regulari quam ti del coalescent lingues.</<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>200 OK</title> </head><body> <h1>OK</h1> <p>The server encountered an internal error or misconfiguration and was unable to complete your request.</p> <p>Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p> <p>More information about this error may be available in the server error log The Apache error log doesn't offer any explanation for this, and I've exhausted my Googling skills, so any help would be greatly appreciated. Thanks.

Read the article

Can mod-rewrite be used to set environmental variables?

- by VLostBoy

Hi, I've got an existing simple rewrite rule like so: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> This works fine, but I want to do one of either two things. On the basis of detecting the clients accept-language header, I want to either (i) Set the detected language as an environmental variable that the script can use or (ii)Rewrite the request so that the url begins with the language code (e.g. www.example.com/en/some/resource) In terms of implementing (i), I defined this rule: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # if the users preferred language is supported... RewriteCond %{HTTP:Accept-Language} ^.*(de|es|fr|it|ja|ru|en).*$ [NC] # define an environmental variable PREFER_LANG RewriteRule ^(.*)$ - [env=PREFER_LANG:%1] # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> I've tried a few variations, but PREFER_LANG is not defined in $_SERVER nor retrievable by getenv. In terms of implementing (ii)... lets just say its messy. I'll post it if I can't get an answer to one. Can anyone advise me? Thanks!

Read the article

SQL Server 2005 SE SP3 on Windows Server 2008 R2 x64 premature query disconnections

- by southernpost

New Dell PowerEdge R910, 4x8 Intel X7560, 192GB RAM, hardware NUMA, local RAID, Broadcom NetExtreme II multiport NIC, unteamed, TCP Offload disabled, RSS disabled, NetDMA disabled, Hyperthreading disabled. SQL Server 2005 SE x64 SP3 on Windows Server 2008 R2 EE x64. No other apps on server. Max Mem = 180GB, Max DOP = 4. Existing Windows Server 2003 R2 EE x64 app server connecting to Dell via firewall using SQL Authenticated logins. Symptoms: Intermittent errors at the app server: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) Findings: Running queries from SSMS located on another machine within the same domain as the SQL Server run without error. SQLIO showed good performance. Windows and SQL logs show no related messages. Microsoft reveiwed PssDiag trace and stated that "We are not seeing timeouts from SQL Side. The queries bring run against the database are timing out within 9secs. This is a database connectivity error." "we can also see from the AttnSeq column that we are also not seeing any Attentions from the SQL Side.". Dell has confirmed that we are using the latest Broadcom drivers.

Read the article

Xen virtual host can reach some sites but not others

- by Tun H S Lee

Okay, this is killing me. Debian Squeeze, Xen 4.0, brand new install. No iptables rules whatsoever except for the ones added by the default xen bridge script. Dom0 can reach the entire world, no problems. DomU can receive packets from some hosts, but not from others. For instance, if I ping Host A, it works fine. If I ping Host B, the DomU reports 100% packet loss. The hosts are random, but consistent (even after reboots). I can see no pattern to why some work and others don't. In fact, in some cases, different virtual hosts on the same server (an other server at a different data center) are divided; some work and others do not. I can reboot (DomU or Dom0 too) and the same hosts will work or fail as before. If I tcpdump on the Host B while pinging from the DomU, everything looks fine. It sees the echo request coming in and says it's sending one back. However, if I tcpdump peth0 on the Dom0, it never sees the echo reply. Any ideas what could be happening? I'm tearing my hair out here.

Read the article

Protect all XML-RPC calls with HTTP basic auth but one

- by bodom_lx

I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

Read the article

How do I set up Tomcat 7's server.xml to access a network share with an different url?

- by jneff

I have Apache Tomcat 7.0 installed on a Windows 2008 R2 Server. Tomcat has access to a share '\server\share' that has a documents folder that I want to access using '/foo/Documents' in my web application. My application is able to access the documents when I set the file path to '//server/share/documents/doc1.doc'. I don't want the file server's path to be exposed on my link to the file in my application. I want to be able to set the path to '/foo/Documents/doc1.doc'. In http://www3.ntu.edu.sg/home/ehchua/programming/howto/Tomcat_More.html under 'Setting the Context Root Directory and Request URL of a Webapp' item number two says that I can rename the path by putting in a context to the server.xml file. So I put <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true">    <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t "%r" %s %b" /> <Context path="/foo" docBase="//server/share" reloadable="false"></Context> </Host> The context at the bottum was added. Then I tried to pull the file using '/foo/Documents/doc1.doc' and it didn't work. What do I need to do to get it to work correctly? Should I be using an alias instead? Are there other security issues that this may cause?

Read the article

Adding a transaction ID to ruby-on-rails logs

- by Blue Warrior NFB

We have a RoR app (rails version 3.2.15 right now). As it has been getting busier, the log-files it's producing are becoming less and less useful for troubleshooting. When they come in like this, it's not a problem: Started GET "/accounts/28088166/kittens/22894/rendered_png?file_id=5d3eaec77954a489b5ddd75143091767&kitten_store_id=9970569bbacf7b6dbeb4eb9295960d69&size=large" for 172.16.202.30 at 2013-11-12 13:45:00 +0000 Processing by KittenController#rendered_png as HTML Parameters: {"file_id"="5d3eaec77954a489b5ddd75143091767", "kitten_store_id"="9970569bbacf7b6dbeb4eb9295960d69", "size"="large", "kitten_cam_id"="280941", "id"="kjlak357aw479607t"} Rendered text template (0.0ms) Sent data (1.8ms) Completed 200 OK in 1037.4ms (Views: 1.4ms | ActiveRecord: 98.4ms) Short request, quickly assembled, all the relevant log-lines are in one block. However, not all of our code renders in 1037ms. There are a few calls that can exceed several seconds, and during that time several of these quicker ones can come in. When that happens, its very, very hard to identify which log-lines belong to which GET. Sent data (4.1ms) Completed 200 OK in 767.4ms (Views: 3.2ms | ActiveRecord: 72.2ms) Completed 200 OK in 2338.0ms (Views: 0.2ms | ActiveRecord: 0.0ms) Ooookaaaay... which goes to what? Is it possible to add something like a transaction-ID to these log-lines? The log-spam would be interspersed, but at least grep-magic would give me the unified entries that I need.

Read the article

No partition on USB Flash Drive?

- by Skytunnel

A friend gave me a corrupted USB memory stick to try recovery data from. But I've had some unusual results, so thought I'd share to see if anyone is familiar with this problem... First off I just tried opening from my own PC. Windows prompted to Format the drive, which I of course declined Downloaded TestDisk to anaylsis the drive. And right away I noticed something strange, on the listed drives it comes up as Disk /dev/sdc - 6144 B - USB Flash Drive That's right, the first USB flash drive smaller than a floppy disk!? Moving on anyway... first anaylsis comes up with: Partition sector doesn't have the endmark 0xAA55 TestDisk's Quick Search gave no results, moved on to Deeper Search: No partition found or selected for recovery This left me stumped. I tired a couple of other programs with no success I did manage to get a backup image, but it was just as small as TestDisk indicated, so nothing of use on it After a few hours trying various suggestions from other sources, I gave in and just tried formatting the drive. But returned the message: Windows was unable to complete the format. From googling that, the suggestion was to delete the partition. But there is no partition to delete in this case. most recently I've tried formatting from cmd, and got this result: Format D: /FS:FAT32 The type of the file system is RAW The new file system is FAT32 Verifying 0M 11 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned The volume is too small for FAT32 Anyone got any suggestions? UPDATE: As per suggestion from @Karen, I tried running a CLEAN from DISKPART, results as follows DiskPart has encountered an error: The request could not be preformed because of an I/O device error.

Read the article

Why domain.com appears as theplant.com when hosted on hostgator?

- by silow

I have a script that's supposed to detect the url of its caller website. If the caller is another website, it should give something like http://callersite.com. I'm using this line of php code (though I suspect this won't matter for sysadmins) gethostbyaddr($_SERVER['REMOTE_ADDR']) I'm testing with a caller site that's hosted on hostgator. What I'm noticing though is that I don't get callersite.com, I get something like 1a.12.12ab.static.theplanet.com. I don't know what theplanet.com is and why I'm not getting caller site.com. Also what do I need to do to really get the domain of the site making a call to my script? -- Thanks for the explanation. Some have advised I use $_SERVER['HTTP_REFERER'] but it's not what I'm after. My script acts as an API. Another website makes a curl request to it and gets an output and later on presents it to the user. So http referrer gives false since the caller site.com is making a direct call to me. So any hope?

Read the article

Serving static content with Apache web server and Tomcat

- by Hunter

I've configured Apache web server and Tomcat like this: I created a new file in apache2/sites-available, named it "myDomain" with this content: <VirtualHost *:80> ServerAdmin [email protected] ServerName myDomain.com ServerAlias www.myDomain.com ProxyPass / ajp://localhost:8009 <Proxy *> AllowOverride AuthConfig Order allow,deny Allow from all Options -Indexes </Proxy> </VirtualHost> Enabled mod_proxy and myDomain a2enmod proxy_ajp a2ensite myDomain Edited Tomcat's server.xml (inside the Engine tag) <Host name="myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> <Host name="www.myDomain.com" appBase="webapps/myApp"> <Context path="" docBase="."/> </Host> This works great. But I don't like to put static files (html, images, videos etc.) into {tomcat home}/webapps/myApp's subfolders instead I'd like to put them the apache webserver's root WWW directory's subdirectories. And I'd like Apache web server to serve these files alone. How could I do this? So all incoming request will be forwarded to Tomcat except those that ask for a static file.

Read the article

Outbound ports to allow through firewall - core requirements

- by dunxd

This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support email and web access, which I know everyone will need: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working? I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

Read the article

Basic IPTables setup for OpenVPN/HTTP/HTTPS server

- by Afronautica

I'm trying to get a basic IPTables setup on my server which will allow HTTP/SSH access, as well as enable the use of the server as an OpenVPN tunnel. The following is my current rule setup - the problem is OpenVPN queries (port 1194) seemed to be getting dropped as a result of this ruleset. Pinging a website while logged into the VPN results in teh response: Request timeout for icmp_seq 1 92 bytes from 10.8.0.1: Destination Port Unreachable When I clear the IPTable rules pinging from the VPN works fine. Any ideas? iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A FORWARD -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT

Read the article

HTTPS Proxy which answers CONNECT with own certificate

- by user1109542

I'm configuring a DMZ which has the following Scheme: Internet - Server A - Security Appliance - Server B - Intranet In this DMZ I need a Proxy server for http(s) connections from the Intranet to Internet. The Problem is, that all Traffic should be scanned by the Security Appliance. For this I have to terminate the SSL Connection at Server B, proxy it as plain http to Server A through the Security Appliance and then further as https into the Internet. An encryption is then persistent between the Client and Server B and the Target Server and Server A. The communication between Server A and Server B is unencrypted. I know about the security risks and that the client will see some warning about the unknown CA of Server B's certificate. As Software I want to use Apache Web Servers on Server A and Server B. As first step I tried to configure Server B that it serves as endpoint for the SSL Encryption. So it has to establish the encryption with the client (answering HTTP CONNECT). Listen 8443 <VirtualHost *:8443> ProxyRequests On ProxyPreserveHost On AllowCONNECT 443 # SSL ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProxyEngine on SSLProxyMachineCertificateFile /etc/pki/tls/certs/localhost_private_public.crt <Proxy *> Order deny,allow Deny from all Allow from 192.168.0.0/22 </Proxy> </VirtualHost> With this Proxy only the CONNECT request is passed through and an encrypted Connection between the client and the target is established. Unfortunately there is no possibility to configure mod_proxy_connect to decrypt the SSL connection. Is there any possibility to accomplish that kind of proxying with Apache?

Read the article

Nginx conditional not evaluating correctly

- by cjc

I'm running into a weird problem with nginx and how it evaluates conditionals. Here's the relevant configuration: set $cors FALSE; if ($http_origin ~* (http://example.com|http://dev.example.com:8000|http://dev2.example.com)) { set $cors TRUE; } if ($request_method = 'OPTIONS') { set $cors $cors$request_method; } if ($cors = 'TRUE') { add_header 'Access-Test' "$cors"; add_header 'Access-Control-Allow-Origin' "$http_origin"; add_header 'Access-Control-Allow-Methods' 'POST, OPTIONS'; add_header 'Access-Control-Max-Age' '1728000'; } if ($cors = 'TRUEOPTIONS') { add_header 'Access-Test' "$cors"; add_header 'Access-Control-Allow-Origin' "$http_origin"; add_header 'Access-Control-Allow-Methods' 'POST, OPTIONS'; add_header 'Access-Control-Allow-Headers' 'X-Requested-With, X-Prototype-Version'; add_header 'Access-Control-Max-Age' '1728000'; add_header 'Content-Type' 'text/plain'; } So, the conditional blocks never trigger. When I remove the conditions, I see that the "Access-Test" header and the "Access-Control-Allow-Origin" set correctly, but, as noted, enabling the conditionals causes the headers not to be sent. I'm testing by running: curl -Iv -i --request "OPTIONS" -H "Origin: http://example.com" http://staging.example.com/ Am I missing something obvious? I've tried the "if" with and without quotes, etc. This is nginx 1.2.9.

Read the article

Let varnish send old data from cache while it's fetching a new one?

- by mark

I'm caching dynamically generated pages (PHP-FPM, NGINX) and have varnish in front of them, this works very well. However, once the cache timeout is reached, I see this: new client requests page varnish recognizes the cache timeout client waits varnish fetches new page from backend varnish delivers new page to the client (and has page cached, too, for the next request which gets it instantly) What I would like to do is: client requests page varnish recognizes the timeout varnish delivers old page to the client varnish fetches new page from backend and puts it into the cache In my case it's not site where outdated information is such a big problem, especially not when we're talking about cache timeout from a few minutes. However, I don't want punish user to wait in line and rather deliver something immediate. Is that possible in some way? To illustrate, here's a sample output of running siege 5 minutes against my server which was configured to cache for one minute: HTTP/1.1,200, 1.97, 12710,/,1,2013-06-24 00:21:06 ... HTTP/1.1,200, 1.88, 12710,/,1,2013-06-24 00:21:20 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:22:08 ... HTTP/1.1,200, 1.89, 12710,/,1,2013-06-24 00:22:22 ... HTTP/1.1,200, 1.94, 12710,/,1,2013-06-24 00:23:10 ... HTTP/1.1,200, 1.91, 12709,/,1,2013-06-24 00:23:23 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:24:12 ... I left out the hundreds of requests running in 0.02 or so. But it still concerns me that there are going to be users having to wait almost 2 seconds for their raw HTML. Can't we do any better here? (I came across Varnish send while cache , it sounded similar but not exactly what I'm trying to do.)

Read the article

Nginx + PHPBB3 reverse proxy images problem

- by siberiano

Hello all I have a problem with my Nginx Frontend + Apache2 backend + PHPBB3 software. It doesn't load the CSS and the images neither. I get constant errors like these: 2010/04/14 16:57:25 [error] 13365#0: *69 open() "/var/www/foo/styles/styles/coffee_time/theme/large.css" failed (2: No such file or directory), client: 83.44.175.237, server: www.foo.com, request: "GET /styles/coffee_time/theme/large.css HTTP/1.1", host: "www.foo.com", referrer: "http://www.foo.com/viewforum.php?f=43" This is my config of the site: server { listen 80; server_name www.foo.com; access_log /var/log/nginx/foo.access.log; # serve static files directly location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /var/www/trasteando/; } location / { root /var/www/foo/; index /var/www/foo/index.php; } # proxy the PHP scripts to predefined upstream .apache. # location ~ .php$ { proxy_pass http://apache; } location /styles/ { root /var/www/foo/styles/; }

Read the article

Help configuring Mercury mail or similiar with XAMPP to send e-mail outside of localhost

- by user291040

I'm building a PHP/MySQL driven website for my department at work (installed via XAMPP). I need to be able to send mail to outside e-mail addresses (e.g., Yahoo, Hotmail, etc.) using the PHP mail() function. As I see it I have to solutions: Configure the SMTP directive in php.ini to the server running at my work. Configure/run a mail server that can send e-mails outside of localhost (I'm trying Mercury because it comes installed with XAMPP). Here are problems I've come up against: I took a guess at our SMTP server name, and when calling PHP mail(), I get the error SMTP server response: 530 5.7.1 Client was not authenticated I can't be sure, however, the SMTP name is correct (I can't get help from our IT guys because of politics). I have tried to use mercury mail. Mercury seems to be picking up the request, but it doesn't want to forward the e-mail to the outside. I keep getting a Temporary error 240 (temporary MX resolution error). I've searched high and low but still can't find a definitive answer on how to send e-mails outside of localhost. Any help is greatly appreciated.

Read the article

Debugging nginx URL rewrite: How do I figure out where the problem is?

- by pjmorse

I have a specific URL pattern on a site which needs to be redirected to the HTTPS version. This is a Django site; Nginx checks each URL in memcached, and if it doesn't find a cached version it proxies the request to Apache/mod_python for Django to render the page. The relevant configuration block is rewrite ^/certificate https://mysite.com/certificate ; rewrite ^/([a-zA-Z]{2})/certificate https://mysite.com/certificate ; ...and it doesn't appear to be working at all. Nginx is: $ nginx -V nginx version: nginx/0.7.65 built by gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) TLS SNI support disabled configure arguments: --prefix=/usr/local/nginx --pid-path=/var/run/nginx.pid --with-http_gzip_static_module --with-http_ssl_module How can I figure out if the problem is my patterns not matching, or a more obscure configuration problem? (The site is localized to three languages, and the localization is in the URL string, e.g. /US/news/, /DE/about, etc. It tracks localization in the session as well, defaulting to US, so if you just requested /news Django will rewrite to /US/news unless the user has a cookie indicating they're using a different localization. Django handles this, though, not Nginx.)

Read the article

How to make Windows command prompt treat single quote as though it is a double quote?

- by mark

My scenario is simple - I am copying script samples from the Mercurial online book (at http://hGBook.red-bean.com) and pasting them in a Windows command prompt. The problem is that the samples in the book use single quoted strings. When a single quoted string is passed on the Windows command prompt, the latter does not recognize that everything between the single quotes belongs to one string. For example, the following command: hg commit -m 'Initial commit' cannot be pasted as is in a command prompt, because the latter treats 'Initial commit' as two strings - 'Initial and commit'. I have to edit the command after paste and it is annoying. Is it possible to instruct the Windows command prompt to treat single quotes similarly to the double one? EDIT Following the reply by JdeBP I have done a little research. Here is the summary: Mercurial entry point looks like so (it is a python program): def run(): "run the command in sys.argv" sys.exit(dispatch(request(sys.argv[1:]))) So, I have created a tiny python program to mimic the command line processing used by mercurial: import sys print sys.argv[1:] Here is the Unix console log: [hg@Quake ~]$ python 1.py "1 2 3" ['1 2 3'] [hg@Quake ~]$ python 1.py '1 2 3' ['1 2 3'] [hg@Quake ~]$ python 1.py 1 2 3 ['1', '2', '3'] [hg@Quake ~]$ And here is the respective Windows console log: C:\Workpython 1.py "1 2 3" ['1 2 3'] C:\Workpython 1.py '1 2 3' ["'1", '2', "3'"] C:\Workpython 1.py 1 2 3 ['1', '2', '3'] C:\Work One can clearly see that Windows does not treat single quotes as double quotes. And this is the essence of my question.

Read the article

How to access Virtual machine using powershell script

- by Sheetal

I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

Read the article

virtual host settings fail on multiple sites

- by Ricalsin

Wow. I'm puzzled. On my ubuntu system I've setup an apache2 server and configured three virtual hosts in the /etc/apache2/sites-available directory. a2ensite to symbolic link the sites-enabled. The first two work great; a simple url of localhost.mysitenames.com works great for the first two sites, both finding their DocumentRoot and Directory paths. The third always generates a Bad Request (Invalid Hostname) response. No server error.log as it never hits it. I've copied/pasted the working vhost files, made the minor changes to the ServerName, DocumentRoot and Directory and the same problem persists. I always "sudo /etc/init.d/apache2 restart" whenever I make a change. I've cleared the browser cache as well. No love. There's not a limit to the number of sites you can host, right? My goal was a localhost development environment with the expectation I can run any number of websites locally before pushing them to a live server. Any thoughts on how to debug this? Or, just a simple solution I am missing?

Read the article

IP Masquerade and forwarding

- by poelinca

Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

Read the article

Why does lighttpd keep static files in cache, even when modified on disk ?

- by Pixelastic

I am using lighttpd to serve static files. I have a bunch of images in a dir that I regularly update. This will change the file content (and filesize) as well as the modification date, but not their filename. When I access the files through http, the updates are not taken into account and lighty serves the old file. I can manually rename the file to something different, then lighttpd will return a 404 error, and if I rename my file back, I will get the correct updated version. Seems like lightty is using some kind of cache mechanism of its own (which is fine) to return static files. Unfortunatly, it seems that this mechanism doesn't update itself when files are modified. I checked through Wireshark, and my browser is really doing a request to the file, this is not a browser caching issue. It returns a 200 OK when requesting it from an empty cache, and a 304 Not Modified otherwise, as expected. But the file is returned with a wrong Last-Modified header that do not reflect the real last modification date. Maybe there is some config directive that I am not aware of ? I would like the files returned by lighty to reflect the changes made on disk directly, or at least being able to invalidate its cache.

Read the article

What could cause Windows 7 to hang whenever I install something?

- by Larsenal

I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

Search Results

Search found 16467 results on 659 pages for 'request filtering'.

Page 537/659 | < Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544 | Next Page >

- by Jo-Pierre

- by Shep

- by VLostBoy

- by southernpost

- by Tun H S Lee

- by bodom_lx

- by jneff

- by Blue Warrior NFB

- by Skytunnel

- by silow

- by Hunter

- by dunxd

- by Afronautica

- by user1109542

- by cjc

- by mark

- by siberiano

- by user291040

- by pjmorse

- by mark

- by Sheetal

- by Ricalsin

- by poelinca

- by Pixelastic

- by Larsenal

< Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544 | Next Page >