Search Results

Search found 39577 results on 1584 pages for 'temp files'.

Page 538/1584 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• How can I override mod-php5's .php mapping to php4-cgi per VirtualHost or Directory?

  - by geocoo

  I am running Debian Linux with apache2 and libapache2-mod-php5 5.3.3-7. I have one VirtualHost which requires php4. So I researched and compiled php4-cgi. However, I cannot seem to: Override mod-php5's mapping of .php in that vhost (or even globally, without disabling php completley). Even find where that mapping is made, in hope of disabling it and enabling mod-php5 or php4-cgi per vhost. This is my php4-cgi mapping (Inside the one php4 vhost): ScriptAlias /php4 /usr/local/php4/bin <Directory /usr/local/php4/bin> Options +ExecCGI +FollowSymLinks </Directory> <Directory /www/test> AddHandler php4-cgi-script .php Action php4-cgi-script /php4/php Options +ExecCGI </Directory> This does not work, mod-php5 still runs all .php files in that vhost/directory. If I change the file extension in the AddHandler above from .php to .php4, then .php4 files do run php4-cgi as expected, but I can't change all the files in the app to .php4. I thought maybe I could disable the mod-php5's mapping in my vhost or directory, then do my cgi-config (as above) but many combinations of these in different contexts did not work: RemoveHandler .php RemoveType .php php_flag engine off (this seems to even disable my php4-cgi so that wont work) The only other place I can find any mapping is in /etc/mime.types, but commenting out the relevant lines and restarting apache2 does not affect mod-php5's .php mapping. I have searched as much as I can, it is now a mystery to me. Any help or direction would be greatly appreciated.

  Read the article

• /etc/security/limits.conf for setting program limits in Linux

  - by Flavius Akerele

  I have the following inside /etc/security/limits.conf (I have specified root separately because * will not include it.) user2 - core unlimited * - core 0 root - core 0 * - rss 512000 root - rss 512000 * - nproc 100 root - nproc 100 * - maxlogins 1 root - maxlogins 1 I run a program as user2 (./programname) but /proc/3498/limits says cores are disabled: Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us Both ulimit -Sa and ulimit -Ha output that cores are disabled: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 14001 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) 512000 open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 100 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Why are cores disabled ?

  Read the article

• Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

  - by Simon

  Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

  Read the article

• Windows Server NTFS volume list file name encodings and any illegal file names

  - by benbradley

  I'm having to deal with a Windows Server (NTFS) file server and our backup application appears to be failing with certain files. According to this https://en.wikipedia.org/wiki/NTFS#Internals NTFS apparently supports file names encoded in UTF-16 but according to their support team, our backup application only supports UTF-8. I'd like to confirm whether this is actually the problem by seeing the file name encoding for myself. The files that are failing appear to be using plain English A-Z letters and other ASCII characters. No accents or non-English letters etc. I suppose even though the letters appear to be plain A-Z the file name could still be encoded in UTF-16. Does anyone know of a utility or script that can recursively go through all files in a directory and show the encoding of the file name? Then I could try renaming to UTF-8 to see if the backup can proceed. I'm not a Windows developer so can't write this up myself. Presumably the encoding of the file name should be stored in the FS somewhere and therefore it should be possible to expose this.

  Read the article

• Codec Problems with trying to edit videos with VirtualDub

  - by Roy Rico

  So, I'm a little frustrated. According to this post and various other internet sources, virtualdub is supposed to allow users to quickly split and join video files. I am using windows 7 64 Bit and the latest version of VirtualDub (64-bit). I have tried to edit various movie files, and each attempt at editing various files I have done has not worked for me. AVI file A.avi won't load, saying that it can't located the Decompressor for the "FMP4" format. I have tried this solution and this one, and neither of them work. I have tried setting the VFW Decompressor for 'Other MPEG4' setting to XVID or LIBAVCODEC. There is no change in virtual dub AVI file C.avi will load in Virtual Dub, but any attempt to split it gives me an error that I don't have XVID codecs installed. I've attempted to install the proper codecs (Shark's Windows 7 Codecs, CCCP) with no change. AVI file C.avi will load, and it will split, but won't split using the "Direct Stream Copy" claiming the compression algorithm is incompatible. I tried "Fast Recompress" option and it created a 27GB file out of what was supposed to be about a 300-400MB file. Can someone please give me some insight into what I'm messing up?

  Read the article

• systemd: enabling cherokee service as a `unit file`

  - by Calvin Cheng

  So I am learning how to use systemd to initialize my services automatically on server reboot. So of course, I first make sure I have systemd and some optional systemd related packages installed. pacman -S systemd initscripts-systemd Installation seems to go well and checking, I can see that systemd and its dependency libsystemd are installed. And the optional package initscripts-systemd is also installed:- [root@li280-195 ~]# pacman -Ss systemd extra/libsystemd 44-5 [installed] systemd client libraries extra/systemd 44-5 [installed] system and service manager extra/systemd-sysvcompat 2-2 sysvinit compat symlinks for systemd community/initscripts-systemd 20120412-1 [installed] Arch specific systemd initialization/bootup scripts for systemd community/systemd-arch-units 20120412-2 Arch specific Systemd unit files Next, I ensure that systemd is loaded up when my server reboots, via grub in grub's /boot/grub/menu.lst file like this:- kernel /boot/vmlinuz root=/dev/xvda ro init=/bin/systemd Rebooting my server to check, all loads up well and I can check that systemd is operational via:- systemctl list-unit-files However, I don't see my cherokee initialization script (which is simply created at /etc/rc.d/cherokee when I installed cherokee earlier via pacman -S cherokee) being listed as one of my unit files. So the question is, how do I do that? How do I put my cherokee initialization script under systemd's control?

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

  - by Absolute0

  I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

  Read the article

• Cannot find network path for computer in workgroup of home Windows XP PCs

  - by John Galt

  VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

  Read the article

• How can I copy a VMware Fusion virtual machine to a FAT32 partition?

  - by Michael Prescott

  I created the virtual machine on a host running OS X. I then moved the machine to a FAT32 partition on an external drive. It moved the first time without error. Then I moved it from the external drive to a host running Ubuntu 9.10. I had to move to a FAT32 partition first because Ubuntu doesn't recognize Mac OS Extended partitions on the drive. So, the virtual machine (vm) ran on the ubuntu host for a while and then I moved it back to the FAT32 partition and from there back to the OS X host. I worked on the vm for a while on the OS X host and then attempted to move it back to the FAT32 partition. I get the following system error: The Finder can’t complete the operation because some data in “my-virtual-machine” can’t be read or written. (Error code -36) Interestingly, I can move the file to another OS X partition, just not FAT32. I also perused VMware's forums and found advice to set permissions on all files and folders to 777. I did this, but have had no success. I notice the the files within the vm package are 777 now, but there is an extended attributes symbol on their permission details "rwxrwxrwx@" Since I can copy the vm between OS X partitions, but not to non OS X partitions, and all files and folders withing the vm package and the package itself have permissions of 777, I speculate that the "@" is the problem. How can I remove the "@" or is there something else I need to modify to allow me to copy/move the vm to other hosts?

  Read the article

• Mysql - innoDb - is in the future! Current system log sequence number

  - by Ward Loockx

  I have this error in my syslog. I restored an older dump to solve this problem, after some reading. Now The errors in syslog are far less than before. But still a few times an hour I get Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96637 log sequence number 7 1223357717 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96638 log sequence number 8 150027924 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96639 log sequence number 7 4208567151 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Anybody that knows how I can track what database is causing this issue? And how to fix?

  Read the article

• WSS Search fills 10 GB limit on SBS server 2011

  - by Kactus

  I've got a SBS Server 2011 Standard SP1 that isn't very busy. 2 Users local and 2 remote. We have sharepoint that has maybe a dozen small documents at most. I've just started getting the following two error occur Could not allocate space for object 'dbo.MSSBatchHistory'.'IX_MSSBatchHistory' in database 'WSS_Search_SERVER' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. And CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 10240 MB per database. Digging around in SQL manager I see that WSS Search DB file size is 10241MB, the log file is only 147 MB Firstly, why is WSS Search taking up so much space? How can I stop it from doing so, and what can I do now to get things running ok. I know about log file truncating and this isn't the case here since the log is tiny. Any help is appreciated. There is plenty of free space on the disk (791GB free) Thanks Kactus

  Read the article

• Ubuntu: Tar doesn't work correctly

  - by Phuong Nguyen

  It looks like tar is having some problems. I installed Ubuntu 10.04 alpha a few of weeks ago. After that, this alpha version is so terrible that I must switched back to 9.10. So, I backed up all of my profiles data (/home/my_user_name) to my_user_name.tar.gz Here what I did: (in U10.04) Open Nautilus and goto /home/my_user_name Press Ctrl+H to view all hidden files. Press Ctrl+A to select all files Right click and choose [Compress...] Now, when I have set up Ubuntu 9.10 again, I extract the tar using Extract Here command from Nautilus. Funny things happened: Instead of extracting to current folder, the archive manager create a folder named my_user_name and put the extracted content into it. All of the files that I placed directly under /home/my_user_name doesn't get extracted All of the directories that started with . (dot) is not extracted. I wonder if there is any incompatibility between tar in U10.04alpha and U9.10 that cause the problem? Now every of my email, basket data is long gone. I'm freaking right now. Is there anything I can do to get the tar return back my data?

  Read the article

• how to back up data from a machine that keeps hanging

  - by Amit Phatarphekar

  Hello - I have a storage server running opensolaris. But lately its been acting up - it hangs at random times due to some SCSI/ATA related error messages. I've tried to fix it without any progress, so I'm giving up now. The machine keeps hanging every 30 minutes or 1 hr ...sometimes after 4 hrs. Its very unpredictable. So I've decided to just reformat the storage server and start from scratch...maybe I'll just not use solaris and install something else, since the errors are related to solaris running on ATA HDD or something. Question - Before I reformat it, I want to back up some of the important data on it. Like it has a VM with 200 GB disk files, it has a whole bunch of ISOs stored on it etc etc. I'm using a simple scp to copy the files over to a different machine. My issue is that, because the machine hangs....sometimes my file copy is incomplete and I have to start all over again. Lets say I'm trying to copy a 200GB file which takes like 4 hrs....IF the machine hangs before the whole file i copied over...I have to recopy the file from scratch. Is there a solution to copy the files over such that if the machine hangs or network goes down..the copying can resume from where it left off? - like if 50 GB of a 200GB file was copied and machine hung....next time, it'll just continue to copy rest of the amount, instead of starting all over again. Thanks Amit

  Read the article

• hdfs configuration

  - by Ananymous

  I am a newbie. Trying to setup a hdfs system to serve my data (I don't plan to use mapreduce) at my lab. So far I have read, cluster setup in but I am still confused. Several questions: Do I need to have a secondary namenode? There are 2 files, masters and slaves. Do I really need these 2 files eventhough I just want hdfs? If I need them, what should go in there? I assume my namenode in masters and datanodes as slaves? Do I need slaves nodes What configuration files are needed for namenode, secondary namenode, datanode and client? (I assume core-site.xml is needed for all 4)? In addition, can someone suggest a good configuration model? sample configuration for namenode, secondary namenode, datanode, and the client would be very helpful. I am getting confused because it seems most of the documentation assumes I want to use map-reduce which isn't the case.

  Read the article

• How do I restrict the Open/Save dialog in Windows to one folder?

  - by MindModel

  I spend a significant amount of time helping non-techies use their PC's. I realized most of that time is spent trying to explain to them how the Windows folder hierarchy works, where the "open file" dialog is pointing now, and how to find that Word document they saved. All this time, they're telling me they "just want to print the file". They refuse to learn how to read the PC screen, try to memorize a fixed set of steps, and end up calling me back to tell me their files disappeared again. I realize it's not productive to try to restrict where PC apps (e.g. Quicken) store files. But if there was a Windows utility I could turn on or off that would restrict the Open/Save dialogs in Windows apps, my noob user friends and I would save an enormous amount of time. The goal would be to have all files whose locations are chosen by the Save dialog saved to one folder, and have the Open dialog always point to that folder, until the utility is turned off. Does such a Windows utility exist?

  Read the article

• Some guest networking and VMware Tools functionality broken with Sprint SmartView on the host

  - by Mads

  Using VMware Workstation 6.5.3 on Vista 64-bit. I started having problems with VMware networking about 6 months ago after upgrades to Sprint SmartView. I did not have problems previously, but I don't know if that is because I was lucky. The main symptoms of the problem when SmartView is installed are: I can no longer drag files from the host to copy them to the guest. When they are dragged, the disallowed cursor (the circle with a slash) shows in the guest. If I try to enable shared folders in the guest while it is running, I will not be able to see the shared files and will be informed that networking is not working. I can still ping guests from the host and I can still access network services via NAT most of the time when connected via my USB broadband adapter. When I configure shared folders so they are "always enabled" (with a mapped drive), I can access files on the via the mapped folders. I can also copy the file on the host and then paste it in the guest, as was suggested in some other threads concerning drag-and-drop problems that I found. The VMware Tools icon is showing in all cases and I don't see any obvious errors in the host's event viewer. If I uninstall SmartView, the problems disappear. If SmartView (current version is 2.28.0082) is reinstalled I will experience the same problems. I have tried uninstalling/reinstalling VMware and SmartView in various ways but it appears tha these problems are consistent when SmartView is installed (not just when it is running or connected, but when it is present on the system). I'm wondering if this is a combination of software (WS 6.5.3, Vista64, and SmartView) that works for other people, which would indicate a problem that is peculiar to my configuration.

  Read the article

• Openldap startup problems after upgrade

  - by Craig Efrein

  I am trying to syncrhonize a ldap slave and master server. The master server is using openldap 2.3.43-12 and the slave server is using openldap 2.4.23. I copied over the files in /var/lib/ldap, started the server and got this error: Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: bdb(dc=myserver,dc=fr): Program version 4.7 doesn't match environment version 4.4 Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: bdb_db_open: database "dc=myserver,dc=fr" cannot be opened, err -30971. Restore from backup! Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: bdb(dc=myserver,dc=fr): txn_checkpoint interface requires an environment configured for the transaction subsystem Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: bdb_db_close: database "dc=myserver,dc=fr": txn_checkpoint failed: Invalid argument (22). Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: backend_startup_one (type=bdb, suffix="dc=myserver,dc=fr"): bi_db_open failed! (-30971) Oct 22 16:16:41 xe-ldap-slave1 slapd[12111]: bdb_db_close: database "dc=myserver,dc=fr": alock_close failed I have used the db_upgrade command to upgrade the database files on the new slave server, but I still get the same error when starting slapd. The master server is Centos 5.5 32bit & openldap 2.3.43-12 The slave server is Centos 6.3 64 bit & openldap 2.4.23 Everything was installed using yum. What is the proper method to synchronize database files from an ldap master server and slave server when the slave server is more recent then the master? I have followed the suggestion from 84104, but I am getting an error on the slave Here is the error on the slave: Oct 23 18:28:30 xe-ldap-slave1 slapd[1415]: slap_client_connect: URI=ldaps://ldap0.lan.myserver.com:636 DN="cn=syncuser,dc=myserver,dc=fr" ldap_sasl_bind_s failed (-1) Oct 23 18:28:30 xe-ldap-slave1 slapd[1415]: do_syncrepl: rid=003 rc -1 retrying Here is the error on the master: Oct 23 18:29:30 ldap0 slapd[15265]: conn=201 fd=35 ACCEPT from IP=192.168.150.100:47690 (IP=0.0.0.0:636) Oct 23 18:29:30 ldap0 slapd[15265]: conn=201 fd=35 closed (TLS negotiation failure) I can do an ldap search on the master just fine with the user configured for synchronization from the new slave server. ldapsearch -LLL -x -H ldaps://192.168.150.99:636 -x -W -b dc=myserver,dc=fr-D"cn=syncuser,dc=myserver,dc=fr"

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• Nginx configuration question

  - by Pockata

  Hey guys, i'm trying to make the autoindex feature only run for my ip address with this code: server{ ... autoindex off; ... if ($remote_addr ~ ..*.*) { autoindex on; } ... } But it doesn't work. It gives my a 403 :/ Can someone help me :) Btw, i'm using Debian Lenny and Nginx 0.6 :) EDIT: Here's my full configuration: server { listen 80; server_name site.com; server_name_in_redirect off; client_max_body_size 4M; server_tokens off; # log_subrequest on; autoindex off; # expires max; error_page 500 502 503 504 /var/www/nginx-default/50x.html; # error_page 404 /404.html; set $myhome /bla/bla; set $myroot $myhome/public; set $mysubd $myhome/subdomains; log_format new_log '$remote_addr - $remote_user [$time_local] $request ' '"$status" "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; # Star nginx :@ access_log /bla/bla/logs/access.log new_log; error_log /bla/bla/logs/error.log; if ($remote_addr ~ 94.156.58.138) { autoindex on; } # Subdomains if ($host ~* (.*)\.site\.org$) { set $myroot $mysubd/$1; } # Static files # location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { # access_log off; # expires 30d; # } location / { root $myroot; index index.php index.html index.htm; } # PHP location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $myroot$fastcgi_script_name; include fastcgi_params; } # .Htaccess location ~ /\.ht { deny all; } } I forgot to mention that when i add the code to remove static files from my access log, the static files cannot be accessed. I don't know if it's relevant :)

  Read the article

• VirtualHost on WAMPSERVER not working

  - by Martin C

  I currently have WAMPSERVER 2.2 set up on my PC. I'm trying to set up a new host called pplocal.local I made the changes in httpd.conf to uncomment this: Include conf/extra/httpd-vhosts.conf Then, I edited httpd-vhosts.cong and I added the following: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/" ServerName localhost </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/pp/" ServerName pplocal.local <Directory "E:/wamp2/www/pp/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> CustomLog "E:\wamp2\logs\pplocal-access.log" common ErrorLog "E:\wamp2\logs\pplocal-error.log" Im my windows 'hosts' file I added: 127.0.0.1 localhost 127.0.0.1 pplocal.local Then, I restarted apache. If I type localhost in my browser I get the files at E:/wamp2/www/ If I type pplocal.local in my browser I get the files at E:/wam2/www/ instead of those at E:/wamp2/www/pp/ I have followed several tutorials and can't see what I'm doing wrong. I'm new to editing the files associated with apache so any advice is appreciated. Thanks

  Read the article

• SVN hangs on commit - any suggestions for troubleshooting?

  - by Richard Beier

  We're having a problem with SVN... Subversion clients such as TortoiseSVN hang when we commit any more than a few files at a time to our server. Everything appears to actually be committed successfully to the repository; but the client hangs after all the data has been transmitted. We're using version 1.4.4 of the SVN server. We use the svn:// protocol rather than http to connect. We've reproduced this problem with several clients: TortoiseSVN (1.6.10), AnkhSVN (2.1), and the Silk command-line client (1.6.12). This is happening for everyone on the team, though some people seem to be more affected than others. If someone commits only a few files, it often works; but with more than half a dozen files, it usually hangs. Does anyone have troubleshooting suggestions? This has been happening sporadically for a while, but it's become pretty consistent lately. We've been working around the issue by killing the hung SVN client, doing "svn cleanup", and then doing "svn up"; but sometimes that causes tree conflicts. Another workaround is to blow away the workspace and check it out again after every commit; but of course that's pretty annoying. Are there any diagnostics that could help us troubleshoot this? We're considering upgrading to SVN 1.6 server, and installing the server on a new machine; but we're wondering if there's an easier solution. Thanks for your help, Richard

  Read the article

• APC fragmentation on EC2 Micro for Wordpress + W3TC

  - by Maarten Provo

  I'm trying to optimize APC for my Amazon EC2 Micro server running one Wordpress-site with W3TC. I've started with the settings advised by TechZilla in another topic but I keep getting high fragmentation with 50% of space being free. I've uploaded an image to http://www.maartenprovo.be/downloads/apc.jpg but I can't post it here since I need at least 10 reputation. What values can I optimize to prevent fragmentation? [apc] apc.enabled=1 apc.shm_segments=1 ;32M per WordPress install apc.shm_size=164M ;Leave at 2M or lower. WordPress does't have any file sizes close to 2M apc.max_file_size=2M ;Relative to the number of cached files apc.num_files_hint=1000 ;Relative to the size of WordPress apc.user_entries_hint=4096 ;The number of seconds a cache entry is allowed to idle in a slot before APC dumps the cache apc.ttl=7200 apc.user_ttl=7200 apc.gc_ttl=3600 ;Auto update chache files on change in WP-ADMIN or W3TC apc.stat=1 ;This MUST be 0, WP can have errors otherwise! apc.include_once_override=0 ;Only set to 1 while debugging apc.enable_cli=0 ;Allow 2 seconds after a file is created before it is cached to prevent users from seeing half-written/weird pages apc.file_update_protection=2 ;Ignore files apc.filters apc.slam_defense = 0 apc.write_lock = 1 apc.cache_by_default=1 apc.use_request_time=1 apc.mmap_file_mask=/var/tmp/apc.XXXXXX apc.stat_ctime=0 apc.canonicalize=1 apc.write_lock=1 apc.report_autofilter=0 apc.rfc1867=0 apc.rfc1867_prefix =upload_ apc.rfc1867_name=APC_UPLOAD_PROGRESS apc.rfc1867_freq=0 apc.rfc1867_ttl=3600 apc.lazy_classes=0 apc.lazy_functions=0

  Read the article

• Using WebDAV for automated downloads

  - by Geo Ego

  I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

  Read the article

• Non-alphanumeric character folder name auto-completion problems

  - by viking

  I have been working with Windows 7's command line and have some folders that begin with non-alphanumeric characters. When I try to use tab completion to complete the folder name, the initial character is not included inside of the quotation marks. Example: C:\Users\username\!example is the folder I want to get into, but when I type: cd ! and press <Tab> to autocomplete, it will complete to cd !"!example" instead of the expected cd "!example" Any ideas on how to fix this besides changing the folder names? EDIT: I realize I could just tab through the entire list after entering cd, but I'm looking for a way to speed up the process. I have been spending a significant amount of time navigating these folders. UPDATE: This also happens if there is a space in the directory. For example: "c:\Program Files". In order to continue using tab to complete, first the second quote has to be deleted. C:\Program press Tab "C:\Program Files" is what appears. To navigate to a subdirectory, first the quote after Program Files has to be deleted before the next directory can be spelled out.

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >