Search Results

Search found 23077 results on 924 pages for 'cd image'.

Page 539/924 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

  • Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

    - by Blair Zajac
    I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

    Read the article

  • symbolic link and filezilla over sftp

    - by Doc
    I'm pretty new to debian, and I'm trying to set up a server. I created a user which can only access to his folder /home/username (and its subdirectory). Now I want to use that user for the webserver I set up, and I gave him access to /var/www but I can't see /var/www through sftp and i did a symbolic link like this root@server:/home/username# ln -s /var/www www root@server:/home/username# cd www root@server:/home/username/www# chown username:username * now, with filezilla, I can see www folder like this - but when I try to open it I get this - Where am I going wrong? sorry for my awful english, i hope you can understand my problem...

    Read the article

  • IF commands in a batch file

    - by Rossaluss
    I'm writing a small batch file to replace users' themes and charts in Office and I have the below batch file that works just fine. cd c:\documents and settings\%username%\application data\microsoft\templates echo Y|rmdir charts /s mkdir charts echo Y|del "c:\documents and settings\%username%\application data\microsoft\templates\document themes\*.*" net use o: \\servername\sms copy "o:\ppt themes\charts\*.*" "c:\documents and settings\%username%\application data\microsoft\templates\charts" copy "o:\ppt themes\Document Themes\*.*" "c:\documents and settings\%username%\application data\microsoft\templates\document themes" c: net use o: /delete Now what I want is the above to only run if it hasn't run before as we'll be pushing this out to all users for around 2 weeks to catch people that aren't in every day. Is there any way to begin the command with something to look for one of the new themes/charts already pushed down, and if it's present, then have it not run? Any help on this would be greatly appreciated as I'm pretty new to these batch files.

    Read the article

  • Error loading operating system WinXP Pro

    - by Jakesan
    So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

    Read the article

  • how to install expect for windows 64 bit?

    - by Master James
    1.Downloaded Active Tcl from http://www.activestate.com/activetcl/downloads/ 2.Installed @ c:/Tcl/ 3.Go to Bin directory in Command prompt (Start Run commad cd c:\Tcl\bin) 4.To install Expect, executed command teacup install Expect It Appears as : Resolving Expect ... Not found in the archives. While a more fuzzy search disregarding letter case and accepting substrings was done, we are sorry to say that it yielded no possible candidates for installation either. Questions to consider: Have you spelled the name correctly ? Including the proper case of characters ? Note that teacup's 'search' command allows you to locate packages by subject, categories, and the like. Aborting installation, was not able to locate the requested entity. How to install Expect for windows 7, 64 bit ?

    Read the article

  • RUN FUNCTION AFTER SOMETIME IN JQUERY & AUTOMATIC SLICING OF IMAGES

    - by user2697032
    I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically. <!DOCTYPE html> <html lang="en"> <head> <title>Slicebox - 3D Image Slider</title> <meta charset="UTF-8" /> <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <meta name="description" content="Slicebox - 3D Image Slider with Fallback" /> <meta name="keywords" content="jquery, css3, 3d, webkit, fallback, slider, css3, 3d transforms, slices, rotate, box, automatic" /> <meta name="author" content="Pedro Botelho for Codrops" /> <link rel="shortcut icon" href="../favicon.ico"> <link rel="stylesheet" type="text/css" href="css/demo.css" /> <link rel="stylesheet" type="text/css" href="css/slicebox.css" /> <link rel="stylesheet" type="text/css" href="css/custom.css" /> <script type="text/javascript" src="js/modernizr.custom.46884.js"></script> </head> <body onload="funct()"> <div class="container"> <div class="codrops-top clearfix"> <a href="http://tympanus.net/Development/AutomaticImageMontage/"><span>&laquo; Previous Demo: </span>Automatic Image Montage</a> <span class="right"> <a target="_blank" href="http://www.flickr.com/photos/strupler/">Images by <strong>ND Strupler</strong></a> <a href="http://tympanus.net/codrops/?p=5657"><strong>Back to the Codrops Article</strong></a> </span> </div> <h1>Slicebox <span>A fresh 3D image slider with graceful fallback</span></h1> <div class="more"> <ul id="sb-examples"> <li>More examples:</li> <li class="selected"><a href="index.html">Example 1</a></li> <li><a href="index2.html">Example 2</a></li> <li><a href="index3.html">Example 3</a></li> <li><a href="index4.html">Example 4</a></li> </ul> </div> <div class="wrapper" id="checkthis"> <ul id="sb-slider" class="sb-slider"> <li> <a href="http://www.flickr.com/photos/strupler/2969141180" target="_blank"><img src="images/1.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Creative Lifesaver</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968268187" target="_blank"><img src="images/2.jpg" alt="image2"/></a> <div class="sb-description"> <h3>Honest Entertainer</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968114825" target="_blank"><img src="images/3.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Brave Astronaut</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968122059" target="_blank"><img src="images/4.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Affectionate Decision Maker</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2969119944" target="_blank"><img src="images/5.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Faithful Investor</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968126177" target="_blank"><img src="images/6.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Groundbreaking Artist</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968945158" target="_blank"><img src="images/7.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Selfless Philantropist</h3> </div> </li> </ul> <div id="shadow" class="shadow"></div> <div id="nav-arrows" class="nav-arrows"> <a href="#x">Next</a> <a href="#y">Previous</a> </div> <div id="nav-dots" class="nav-dots"> <span class="nav-dot-current"></span> <span></span> <span></span> <span></span> <span></span> <span></span> <span></span> </div> </div><!-- /wrapper --> <p class="info"><strong>Example 1:</strong> Default settings</p> </div> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script type="text/javascript" src="js/jquery.slicebox.js"></script> <script type="text/javascript"> $(function() { var Page = (function() { var $navArrows = $( '#nav-arrows' ).hide(), $navDots = $( '#nav-dots' ).hide(), $nav = $navDots.children( 'span' ), $shadow = $( '#shadow' ).hide(), slicebox = $( '#sb-slider' ).slicebox( { onReady : function() { $navArrows.show(); $navDots.show(); $shadow.show(); }, onBeforeChange : function( pos ) { $nav.removeClass( 'nav-dot-current' ); $nav.eq( pos ).addClass( 'nav-dot-current' ); } } ), init = function() { initEvents(); }, initEvents = function() { // add navigation events $navArrows.children( ':first' ).on( 'click', function() { setInterval("callme()", 1000); return false; } ); //$(function(){ //callme(); //}); function callme(){ //$('#checkit').append("callme loaded<br />"); slicebox.next(); setInterval("callme()", 1000); } $navArrows.children( ':last' ).on( 'click', function() { slicebox.previous(); return false; } ); $nav.each( function( i ) { $( this ).on( 'click', function( event ) { var $dot = $( this ); if( !slicebox.isActive() ) { $nav.removeClass( 'nav-dot-current' ); $dot.addClass( 'nav-dot-current' ); } slicebox.jump( i + 1 ); return false; } ); } ); }; return { init : init }; })(); Page.init(); }); </script> <script> // make sure the "myContainer" id in the script is the same id of the div $(document).ready(function() { slicebox.next(); $('#nav-arrows').sbslider(); // this is the piece of code that will do the magic thing }); </script> </body> </html> I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically.

    Read the article

  • Converting a .bat executable to Mac

    - by Wes
    I need some help converting a .bat executable file that I run on our PC at my job so that it works on a mac. Before we upload tar files to our website we run this script which to the best of my knowledge simply unlocks all of the permissions to the tar and all the images within. If someone could help me in "translating" it to run on my Mac that would be awesome! I was hoping I could set up something in Automator Here's the code del images5.tar move images4.tar images5.tar move images3.tar images4.tar move images2.tar images3.tar move images.tar images2.tar cd .. tar --mode=777 -rvf images.tar *.jpg tar --mode=777 -rvf images.tar p move images.tar ./tarpics

    Read the article

  • How can I work out what events are being waited for with WinDBG in a kernel debug session

    - by Benj
    I'm a complete WinDbg newbie and I've been trying to debug a WindowsXP problem that a customer has sent me where our software and some third party software prevent windows from logging off. I've reproduced the problem and have verified that only when our software and the customers software are both installed (although not necessarily running at logoff) does the log off problem occur. I've observed that WM_ENDSESSION messages are not reaching the running windows when the user tries to log off and I know that the third party software uses a kernel driver. I've been looking at the processes in WinDbg and I know that csrss.exe would normally send all the windows a WM_ENDSESSION message. When I ran: !process 82356020 6 To look at csrss.exe's stack I can see: WARNING: Frame IP not in any known module. Following frames may be wrong. 00000000 00000000 00000000 00000000 00000000 0x7c90e514 THREAD 8246d998 Cid 0248.02a0 Teb: 7ffd7000 Win32Thread: e1627008 WAIT: (WrUserRequest) UserMode Non-Alertable 8243d9f0 SynchronizationEvent 81fe0390 SynchronizationEvent Not impersonating DeviceMap e1004450 Owning Process 82356020 Image: csrss.exe Attached Process N/A Image: N/A Wait Start TickCount 1813 Ticks: 20748 (0:00:05:24.187) Context Switch Count 3 LargeStack UserTime 00:00:00.000 KernelTime 00:00:00.000 Start Address 0x75b67cdf Stack Init f80bd000 Current f80bc9c8 Base f80bd000 Limit f80ba000 Call 0 Priority 14 BasePriority 13 PriorityDecrement 0 DecrementCount 0 Kernel stack not resident. ChildEBP RetAddr Args to Child f80bc9e0 80500ce6 00000000 8246d998 804f9af2 nt!KiSwapContext+0x2e (FPO: [Uses EBP] [0,0,4]) f80bc9ec 804f9af2 804f986e e1627008 00000000 nt!KiSwapThread+0x46 (FPO: [0,0,0]) f80bca24 bf80a4a3 00000002 82475218 00000001 nt!KeWaitForMultipleObjects+0x284 (FPO: [Non-Fpo]) f80bca5c bf88c0a6 00000001 82475218 00000000 win32k!xxxMsgWaitForMultipleObjects+0xb0 (FPO: [Non-Fpo]) f80bcd30 bf87507d bf9ac0a0 00000001 f80bcd54 win32k!xxxDesktopThread+0x339 (FPO: [Non-Fpo]) f80bcd40 bf8010fd bf9ac0a0 f80bcd64 00bcfff4 win32k!xxxCreateSystemThreads+0x6a (FPO: [Non-Fpo]) f80bcd54 8053d648 00000000 00000022 00000000 win32k!NtUserCallOneParam+0x23 (FPO: [Non-Fpo]) f80bcd54 7c90e514 00000000 00000022 00000000 nt!KiFastCallEntry+0xf8 (FPO: [0,0] TrapFrame @ f80bcd64) This waitForMultipleObjects looks interesting because I'm wondering if csrss.exe is waiting on some event which isn't arriving to allow the logoff. Can anyone tell me how I might find out what event it's waiting for anything else I might do to further investigate the problem?

    Read the article

  • Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

    - by bumble_bee_tuna
    Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

    Read the article

  • Why does MTP work on one machine, but not another?

    - by bobmcn
    I have two Dell computers, a laptop and a desktop. I reinstalled Windows XP home on both, from the same CD. Then I installed Service pack 3 and ran windows update. When I connect my Creative Zen media player to the desktop, the MTP software that is part of XP recognizes it, and I can copy file to and from it using Windows Explorer. But when I connect the same player with the same cable to the laptop, I can see it in Windows Explorer, but none of the folders that are visible via the desktop are available, and I can't copy anything to or from it. How can I get this working on the laptop?

    Read the article

  • Ubuntu: One or more of the mounts listed in fstab cannot ye be mounted

    - by Phuong Nguyen
    I was enjoying a Movie when my Ubuntu suddenly hung. At the next reboot, here is the message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /home: waiting for /dev/disk/by-uuid/.... Press ESC to enter a recovery shell. Problems: When I enter recovery shell, I don't know that to do. If I press Ctrl+D, then the message above will reappear. What should I do? I checked with Ubuntu Live CD and my partition looks OK. I have 2 separate partitions for / and /home

    Read the article

  • Gparted: Copy Greyed Out

    - by David
    I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

    Read the article

  • commitAnimations is not resizing my UIImageView subview

    - by AaronG
    I have created a UIView as a subview and to that subview I have added a UIImageView as a subview. UIView *viewCreated; UIButton *buttonCreated; UIImageView *imageViewCreated; CGRect myFrame = CGRectMake(0, 0, 1024, 1024); viewCreated = [[UIView alloc] initWithFrame:myFrame]; [viewCreated setTag:intTag]; viewCreated.backgroundColor = [UIColor redColor]; [self.view addSubview:viewCreated]; [self randomize]; UIImage *d1Image = [UIImage imageNamed:[NSString stringWithFormat:@"image%d.png", randomNumber]]; imageViewCreated = [[UIImageView alloc] initWithFrame:CGRectMake(0.0f,0.0f,1024.0f, 1024.0f)]; [imageViewCreated setImage:[UIImage imageNamed:[NSString stringWithFormat:@"image%d.png", randomNumber]]]; [viewCreated addSubview:imageViewCreated]; //[imageViewCreated release]; return [viewCreated autorelease]; But when this code executes only the first subview is animated and resized. The UiimageView moves 200 pixels to the left but does not get resized. NSLog(@"sender tag %i",[sender tag]); UIView *currentView = [self.view viewWithTag:[sender tag]]; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:1.5]; currentView.frame = CGRectMake(-200, 0,40, 102); [UIView commitAnimations]; I am pretty sure am I not creating the subviews correctly programmatically, because when I do it in Interface Builder it works as expected. Do I have to do something specific to actually attach the behavior of the second subview to the first subview?

    Read the article

  • How do I ensure only the headers are shown for the first item in an ItemsControl in WPF?

    - by Dan Ryan
    I am using MVVM binding an ObservableCollection of children to an ItemsControl. The ItemsControl contains a UserControl used to style the UI for the children. <ItemsControl ItemsSource="{Binding Documents}"> <ItemsControl.ItemTemplate> <DataTemplate> <View:DocumentView Margin="0, 10, 0, 0" /> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> I want to show a header row for the contents of the ItemsControl but only want to show this once at the top (not for every child). How can I implement this behaviour in the DocumentView user control? Fyi I am using a Grid layout to style the child rows: <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="34"/> <ColumnDefinition Width="100"/> <ColumnDefinition Width="*" /> <ColumnDefinition Width="60" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <TextBlock Grid.ColumnSpan="4" Grid.Row="0" Text="Should only show this at the top"></TextBlock> <Image Grid.Column="0" Grid.Row="1" Height="24" Width="24" Source="/Beazley.Documents.Presentation;component/Icons/error.png"></Image> <ComboBox Grid.Column="1" Grid.Row="1" Name="ContentTypes" ItemsSource="{Binding RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type View:MainView}}, Path=DataContext.ContentTypes}" SelectedValue="{Binding ContentType}"/> <TextBox Grid.Column="2" Grid.Row="1" Text="{Binding Path=FileName}"/> <Button Grid.Column="3" Grid.Row="1" Command="{Binding RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type View:MainView}}, Path=DataContext.RemoveFile}" CommandParameter="{Binding}">Remove</Button> </Grid>

    Read the article

  • How can I setup a group writeable directory?

    - by meder
    $ whoami meder $ cd /var/www $ sudo mkdir html $ sudo groupadd web $ sudo usermod -a -G web meder $ sudo usermod -a -G web medertest $ sudo chown meder:web html $ sudo chmod -R g+rwx html The problem is, anytime I create a new file in /var/www/html even though the group is set to web, it is only writeable by the original user. I was given the advice of setting the umask to be 002 because the default is what causes the problems. But I would have to do this for all users in that group, and as far as I know it would be tedious having all of them modify ~/.bashrc to have umask 002. Even if I can do it myself with a shell command for all of those users, it still seems too tedious. Can anyone offer any advice on having a group writeable directory?

    Read the article

  • Upgrading Fedora 16 to 17 with crypted LVM

    - by nijansen
    As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

    Read the article

  • Mercurial mirror: abort: No such file or directory: http://[...]/00manifest.i

    - by Sridhar Ratnakumar
    I am trying to setup a daily mirror of a mercurial repository - code.python.org in particular - within our local network, and serve that via Apache HTTPD. On the remote host that hosts apache, I did this: $ cd /var/www $ hg clone http://code.python.org/hg/trunk/ On my macbook, I ran: $ hg -v clone http://remote/trunk/ (falling back to static-http) abort: No such file or directory: http://remote/trunk/.hg/store/00manifest.i Google does not show any relevant result for this particular error. I remember back in those days being able to setup Bazaar mirrors by a simple clone. Doesn't Mercurial work like that? How do I setup a mirror that must further act like a clone URL?

    Read the article

  • How to enable CDR on AsteriskNow 1.5

    - by Michal Niklas
    I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

    Read the article

  • Ubuntu 12.04 Server: permissions on /var/www for newly copied files

    - by Abe
    I ran the following commands to set up ACL on the /var/www folder in my Ubuntu 12.04 Server: sudo usermod -g www-data abe sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I downloaded Wordpress using wget in my /var/www folder and unzipped the downloaded file: cd /var/www wget http://wordpress.org/latest.zip mv latest.zip wordpress.zip unzip wordpress.zip I created a new database and user in mysql and attempted to run the setup process through the web interface. When I enter the configuration info in wordpress I run into the following error message: Sorry, but I can't write the wp-config.php file. When I run ls -la, I see that the files are owned by my user abe, but they are part of the group www-data. Would I have to run the chmod command every time I copy new files to /var/www? sudo chmod -R 775 /var/www

    Read the article

  • How do I perform commands in another folder, without repeating the folder path?

    - by Valter Henrique
    Is there a clever way to do copy and move operations or a command to duplicate a file, without having to do a cd, then mv after, at the same folder? For example, I have to run the following: mv /folder1/folder2/folder3/file.txt /folder1/folder2/folder3/file-2013.txt Note that the directory to where I'm moving the file is the same, but I have to put the whole path again and sometimes it gets annoying. I'm curious to know if there's another way to do that without having to put the whole path again, because the operation would be done in the same path.

    Read the article

  • PC doesn't power up anymore

    - by Andrew
    I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

    Read the article

  • error in a pygame code

    - by mekasperasky
    # INTIALISATION import pygame, math, sys from pygame.locals import * screen = pygame.display.set_mode((1024, 768)) car = pygame.image.load('car.png') clock = pygame.time.Clock() k_up = k_down = k_left = k_right = 0 speed = direction = 0 position = (100, 100) TURN_SPEED = 5 ACCELERATION = 2 MAX_FORWARD_SPEED = 10 MAX_REVERSE_SPEED = ­5 BLACK = (0,0,0) while 1: # USER INPUT clock.tick(30) for event in pygame.event.get(): if not hasattr(event, 'key'): continue down = event.type == KEYDOWN # key down or up? if event.key == K_RIGHT: k_right = down * ­5 elif event.key == K_LEFT: k_left = down * 5 elif event.key == K_UP: k_up = down * 2 elif event.key == K_DOWN: k_down = down * ­2 elif event.key == K_ESCAPE: sys.exit(0) # quit the game screen.fill(BLACK) # SIMULATION # .. new speed and direction based on acceleration and turn speed += (k_up + k_down) if speed > MAX_FORWARD_SPEED: speed = MAX_FORWARD_SPEED if speed < MAX_REVERSE_SPEED: speed = MAX_REVERSE_SPEED direction += (k_right + k_left) # .. new position based on current position, speed and direction x, y = position rad = direction * math.pi / 180 x += ­speed*math.sin(rad) y += ­speed*math.cos(rad) position = (x, y) # RENDERING # .. rotate the car image for direction rotated = pygame.transform.rotate(car, direction) # .. position the car on screen rect = rotated.get_rect() rect.center = position # .. render the car to screen screen.blit(rotated, rect) pygame.display.flip() enter code here the error i get is this Non-ASCII character '\xc2' in file race1.py on line 13, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Not able to understand what the error is and how to get rid of it?

    Read the article

  • UITableView Inactive Until Scroll iPhone

    - by dubbeat
    HI, I'm trying to find the cause of some annoying behaviour with my UITableView. In each cell of my table (10 of them ) I asynchronously load an image. The problem is, is that if I don't touch the app at all the imageviews will permanently show a loading icon. However as soon as I scroll a cell off the screen and back on again the image shows straight away. What could be causing this "stuck in the mud" behaviour? Is there a way to force whatever gets called when the list is scrolled to make the needed update happen? #define ASYNC_IMAGE_TAG 9999 #define LABEL_TAG 8888 // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { PromoListItem *promo = [promoList objectAtIndex:indexPath.row]; static NSString *CellIdentifier = @"Cell"; AsyncImageView *asyncImageView = nil; UILabel *label = nil; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; CGRect frame; frame.origin.x = 0; frame.origin.y = 0; frame.size.width = 100; frame.size.height = 100; asyncImageView = [[[AsyncImageView alloc] initWithFrame:frame] autorelease]; asyncImageView.tag = ASYNC_IMAGE_TAG; [cell.contentView addSubview:asyncImageView]; frame.origin.x = 110; frame.size.width =100; label = [[[UILabel alloc] initWithFrame:frame] autorelease]; label.tag = LABEL_TAG; [cell.contentView addSubview:label]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; } else { asyncImageView = (AsyncImageView *) [cell.contentView viewWithTag:ASYNC_IMAGE_TAG]; label = (UILabel *) [cell.contentView viewWithTag:LABEL_TAG]; } NSURL *url = [NSURL URLWithString:promo.imgurl]; [asyncImageView loadImageFromURL:url]; label.text = promo.artistname; return cell; }

    Read the article

  • Problem with bios update on Intel S3420GP

    - by wurlog
    I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

    Read the article

  • DisplayObject snapshot in flex 3

    - by simplemagik
    i'm creating a visual editor in flex and need to let users export thier projects into Image format. But i have one problem: size of the canvas is fixed and when user add element which is out of these sizes some scroll bars added. And user continue working on the project. but when he want to take snapshot of the canvas he just get the visible part ot the canvas with scrollbars. how to get image of the fullsize canvas? The only solution i found is to check the positions and sizes of canvas child objects and rezise it to fit them. then take snap and resize back. But it hmmmm... too complicated i think. Is there some "easy methods"? <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"> <mx:Script> <![CDATA[ import mx.graphics.ImageSnapshot; private function SnapshotButtonHandler():void { var snapshot:ImageSnapshot = ImageSnapshot.captureImage(AppCanvas); var file:FileReference = new FileReference(); file.save(snapshot.data, "canvas.png"); } ]]> </mx:Script> <mx:Canvas id="AppCanvas" width="800" height="300" backgroundColor="0xFFFFFF"> <mx:Box x="750" y="100" width="100" height="100" backgroundColor="0xCCCCCC" /> </mx:Canvas> <mx:Button id="SnapshotButton" label="take snapshot" click="SnapshotButtonHandler()" /> </mx:Application>

    Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >