Search Results

Search found 28880 results on 1156 pages for 'check disk'.

Page 539/1156 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Method for imaging a HDD? [closed]

  - by Sonny Ordell

  Possible Duplicate: Imaging new hard drive in Windows 7 laptop? I have to image my 320gb Laptop HDD before I send it in for repairs. The HDD is likely going to get replaced, and I would ideally like to be able to restore everything as I have it now without having to reinstall my OSes, programs and place all my files back again. I can make space on an external HDD I have, so am just looking for how I should go about this. Should I just use dd with a linux rescue cd? Or is there perhaps a more suitable program with its own rescue disk?

  Read the article

• Copying windows 8 Users folder having long long paths

  - by bilal.haider

  I was trying to move my "Users" folder in Windows 8 as described here and here. But when I try to copy the folder using "xcopy" in Windows Installation Disk Repair Mode, after some files are copied, I get "insufficient memory". The files on which the error is given are like C:\Users\Bilal\Application Data\Application Data\Application Data.........Application Data\Application Data..... What is the point in such directories within directories? I also tried copying them using Mini Windows XP, but the problem was there too.. Also tried copying using Parted Magic Live CD... but still.. So now, how can I move them? Another Question. Is moving such/ system files using Linux a good idea? Does it do anything to permissions?

  Read the article

• How can I restore VM on a new Hyper-V server?

  - by jaloplo

  Hi all, I was working gladly with my VM on my local Hyper-V server. But, after installing some updates on the host the system only show the famous blue screen. I couldn't start my host so I reinstalled it and configured as new Hyper-V server. My VM was in a another disk to prevent this happening but I don't know how to add it as a new VM on new server. In addition, this VM has various snapshots so, how can I add this VM to my new Hyper-V server? UPDATE: I can't do Export/Import because my server crashed before I can't do it.

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Removing vg and lv after physical drive has been removed

  - by Rene

  We had a disk fail and replace but forgot to vgreduce first. The drive was on it's own VG and with two empty LV's and these are now causing LVM to complain every time any command is run, i.e. # lvscan /dev/vg04/swap: read failed after 0 of 4096 at 4294901760: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4294959104: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4096: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903864832: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903922176: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 4096: Input/output error The two LV's are not important, I just want to stop this error from displaying.

  Read the article

• How to netboot ubuntu running iniside VirtualBox on Mac Air

  - by murungu

  Having configured a virtual machine for Ubuntu on VirtualBox on my mac air I need to install Ubuntu OS itself. I have selected the hardrive as the primary boot device and the network as the secondary boot device, so I am not prompted to install an Ubuntu disk at boot time. It attempts to netboot but is unable to locate Ubuntu and cannot find anywhere in the configuration where I can explicitly specify where to find and Ubuntu image, so assume it reverts to some default location and fails. Has anybody out there ever successfully installed ubuntu on virtual box on their Mac Air? What steos did you take to get it right?

  Read the article

• Jungledisk - choosing between Amazon S3 and Rackspace ?

  - by Dietmar

  Hi, jungledisk is owned by rackspace and offers an option to choose Amazon S3 which charges for traffic whereby if data is stored on rackspace, no charges for traffic. For a small company, to just backup files with jungle disk from ubuntu linux OS computers, i wonder what to choose. Commercial psychologically the price on traffic and the Amazon brand make it appear or maybe it is, of better quality than the cheaper Rackspace offer which is when it comes for just backing up ok ? but if its about backing up around 30 GB which updates from time to time, what would you consider a good choice ?

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Ubuntu: One or more of the mounts listed in fstab cannot ye be mounted

  - by Phuong Nguyen

  I was enjoying a Movie when my Ubuntu suddenly hung. At the next reboot, here is the message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /home: waiting for /dev/disk/by-uuid/.... Press ESC to enter a recovery shell. Problems: When I enter recovery shell, I don't know that to do. If I press Ctrl+D, then the message above will reappear. What should I do? I checked with Ubuntu Live CD and my partition looks OK. I have 2 separate partitions for / and /home

  Read the article

• SQL Server Transaction Log RAID

  - by Eric Maibach

  We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• How to present shared storage for MS Cluster Services running on vSphere 5

  - by MDMarra

  I've seen two approaches to handling the presentation of shared storage to Windows Server 2008 R2 cluster VMs on VMWare vSphere. One is the traditional method of carving out a LUN on your SAN and presenting it to both hosts through the Microsoft ISCSI software initiator. The other method is to make a vmdk on an existing LUN and attach it to both hosts and made it an independent disk so that it isn't affected by snapshots. Is one way the "correct" way, or are both viable? Is there any advantage or disadvantage to doing either?

  Read the article

• How to choose my own filename format for subscribed podcast files?

  - by meomaxy

  I subscribe to several podcasts where the filenames of the downloaded mp3 files have no particular pattern to them. When I copy the directory of accumulated mp3 files into my mp3 player, the files play in alphabetical order. What I really want is to play the files chronologically by release date. I currently use iTunes on Windows XP to download the files. What I do now is manually rename the files, adding the date in YYYYMMDD format to the start of each filename so that an alphabetical listing of files will correspond to their chronological order when I listen to them later in PocketTunes on my Palm Centro. Is there some way to get the release date into the filename automatically? If so, I could automate or possibly skip the file renaming step. I would switch from iTunes to something else if that would solve my problem. The file creation time on my local disk isn't a reliable indicator because sometimes I download a few days worth of content at one time, and the files don't necessarily get downloaded in chronological order.

  Read the article

• Can someone correct me about Windows 2008 DFS implementation

  - by cwheeler33

  I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

  Read the article

• Splitting a drive which has layout as mirrored and type as dynamic

  - by shiva

  I have a C drive/volume in my server with layout = mirror and type =dynamic and status as healthy(boot,pagefile,crashdump). I have some questions regarding this configuration: I think it is a raid configuration.Please correct me if I am wrong. I read that, mirroring is nothing but raid-1 configuration. All my software and OS is in this drive. I want my software to be in a separate drive, but I am not sure if I can create a separate drive from the above mentioned c drive. I want to know: a. If I can do it and how ?(using disk management) b. If this is a right approach ?

  Read the article

• Issues with non-HP harddisk in HP ML 350 server?

  - by Torben Warberg Rohde

  I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

  Read the article

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

• Freebsd 7.2: View firmware version for disks?

  - by Stefan Lasiewski

  I'm running FreeBSD 7.2, with Seagate Cheetah (Model ST####) drives. We are having some problems with the SCSI drives on these machines. Our vendor says that updating the firmware on the drives may fix the problems, and a firmware update did seem to fix some SCSI problems on another FreeBSD host. How can I view the firmware version of these drives? I tried some tips from nixCraft, but nothing has worked so far. In dmesg, I see the Make and Model, but In Linux, this information is often in /var/log/dmesg (Although /var/log/dmesg is sometimes out of date), or I often find this information with something like sudo lshw -class disk, lshal or dmidecode.

  Read the article

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• Windows 7 can't make back up

  - by J. Pablo Fernández

  I've been trying to get Windows 7 to make a backup for a week or so. I'm backing up to a local NAS and I'm getting this error: Windows Backup: Troubleshooting Options Check your backup Windows Backup could not create a zip file. This could be because the drive that Windows is installed on does not have enough space or it could be a temporary error. Make sure you have at least 400 MB of free space and try again. Backup time: 2009-09-07 14:48 Backup location: \VANGELIS\Shared\Backup\lennon\ Error code: 0x81000015 My local hard disk has 290GB free and my NAS has 200GB free. Any ideas what might be wrong?

  Read the article

• Cannot install netbeans on Gentoo

  - by siebz0r

  I'm trying to install Netbeans on my Gentoo system and I just cannot get it to work. When I'm compiling it It fails due to not being able to locate org.apache.maven.project.MavenProject. [nb-javac] class file for org.apache.maven.project.MavenProject not found I'm suspecting it has something to do with the installation not being able to find several files. However these are reported as warnings. The missing files have a version in their filenames, the files that are on the disk have a version number that is slightly off. So that explains why these cannot be found. The full output of the install can be found here: http://pastebin.com/43NS2ktz

  Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >