Search Results

Search found 28301 results on 1133 pages for 'external process'.

Page 539/1133 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

• Toshiba monitor not displaying anything

  - by MirroredFate

  Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

  Read the article

• MSDeploy - possible to call setAcl on multiple destinations in one go?

  - by growse

  I'm building a nice little continuous integration environment for our development team, based on TeamCity. It's working rather nicely, as it can build a mix of .NET and PHP projects, and push them to our internal and external platforms. I'm primarily using MsDeploy to push everything to the internal platform, as that's all IIS based. However, there's a number of builds where I need to set directory permissions on the destination directory. I can use the setAcl operator just fine, but that only seems to take a single destination as an argument. Therefore, if I need to alter the permissions on 5 destination directories, I need to call MsDeploy 5 times, which seems a lot of overhead. Is there a sensible way around this? Reading the documentation, I don't think MsDeploy takes more than a single argument for the setAcl operator, but could be wrong. Is there a better way for a build server to set multiple directory permissions in one go?

  Read the article

• How to enlarge a .PDF document to better show it in a Kindle 6"?

  - by Gus

  I have a kindle 6". The problem is that I often read pdf files that are technical, therefore, it doesn't get converted very well to kindle's native format (for example, code blocks get messed, and things like that). When I view the pdf page, it's very small to read easily, so I have to rotate the screen to a horizontal position in order to see it better, but my page get divided. But some documents would be easy to read in vertical position if I had the chance to enlarge the font size a little bit in a external pdf editor, therefore enabling the reading in the vertical orientation. Has anybody had the same situation? Is there a solution for that?

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now...no problems (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• I'm receiving an SSL error in various browsers, but I can't find non-SSL content

  - by Scott Vercuski

  I'm receiving an error with my SSL connection. Using google chrome I see the following error: Your connection is encrypted with 128-bit encryption ... however this page includes other resources which are not secure I've scoured the source code, scripts and rendered code in the browser but cannot find where an http:// call is made. I've also used Fiddler2 to examine the traffic and everything is coming across via HTTPS. Has anyone run into this issue before and if so how did you go about finding the culprit. The website is running ASP.NET MVC3 in C#. The page in question is a simple payment page. The only external call is the google analytics tracking code. The page appears to load correctly, all images and scripts are in place.

  Read the article

• Setting up dante socks server

  - by skerit

  I want to tunnel all my internet traffic through my vps, so I'm trying to install a proxy server. However: I can't seem to browse the internet through Dante. I get the ERR_EMPTY_RESPONSE error. This is my config: logoutput: stderr /home/user/dantelog internal: eth1 port=1080 external: eth1 method: username pam user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } Do I really have to run 2 proxy servers: one for http and one for socks? or is there something else I can do?

  Read the article

• qtcreator keyboard problem: azerty/qwerty

  - by Allen

  I picked up the qt SDK and I've been trying it out. I'm working in English but I have a French AZERTY keyboard. When I run Qt Designer all is fine. When I run Qt Creator or Qt Designer from within Qt Creator things work as though I had a QWERTY keyboard, so I have to hit the "q" key to get an "a", etc. Qt Creator is version 1.3.1 and it is using Qt 4.6.2. My PC is running XP. What is going on and what is to be done? Any ideas? Editing a program in this setup is, of course, impossible! Luckily I discovered I can use an external editor, so I can use xemacs, which would be my first choice anyway, but this keyboard problem is a real nuisance! Thanks.

  Read the article

• How to access web server of any machine of my network from the outside

  - by Luc

  Hello, I have an ip like username.dyndns.org, this is the external IP of my router. On my lan, I have several machine (m1, m2, ...) , each running a dedicated web server. Is it possible to reach each machine from the outside with something like: http://m1.username.dyndns.org http://m2.username.dyndns.org ? Do you know what needs to be configured in my router for NAT ? Also, is there a special directive in Apache to do so ? Thanks a lot, Regards, Luc

  Read the article

• AD LDS High availability

  - by user792974

  We are currently using CAS for multiple directory authentication. AD for internal users, AD LDS for external users. I've read that NLB is a possible solution, but wondering if this is possible with SRV records, and how about you would correctly configure that. With our AD directory, I can bind with olddomain.local, and hit any of the DCs in the domain. We don't want to hardcode servernames into CAS, so the end goal is to bind with LDSdomain.gov. nslookup -type=srv _ldap._tcp.LDSdomain.gov returns _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 100 port = 1025 svr hostname = server01 _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 200 port = 1025 svr hostname = server02

  Read the article

• Automated method to convert .reg registry file to reg.exe commands

  - by nhinkle

  Occasionally I need to put registry entries into batch files to use in login scripts, unattended installers, etc. While it's pretty easy to add one or two registry commands to a batch file using reg.exe, when there is a large amount of registry data, it becomes tedious. I usually just end up merging an external reg file in those cases, which I would like to avoid, since it ruins the self-contained nature of the batch file. Does anybody know of any tools which can automatically convert a .reg file to a series of REG ADD and REG DELETE commands? This would make life a lot easier! Thanks.

  Read the article

• How best to backup 6x Win2k3 Servers

  - by saille

  We have a external HP LTO3 tape drive. It needs to backup 6 Windows 2003 machines every night. Servers are HP DL380 G3 and the tape drive is attached locally to one of them via SCSI. On a budget of $0, and a goal of keeping-it-simple, what is going to be the best way to backup these machines? What software to use? NT Backup? Or does HP have something better for free? We don't need image backups - file system + system state will be adequate. Do we need to copy the files to be backed up onto the machine with the tape drive attached? Edit: Let me ask a more focussed question: Would you use NT Backup or something else? No soap boxing please, we've after some quick advice from someone who's used a similar setup.

  Read the article

• How to check for duplicate files?

  - by miorel

  I have an external hard drive on which I have backed up files several times. Some files were modified between backups, others were not. Some may have been renamed. Now I'm running out of space, and I'd like to clean up duplicate files. My idea was to md5sum every file on the drive, then look for duplicates, and diff the relevant files (just in case, haha). Is this the best way to do this? What are some other methods of checking for duplicate files?

  Read the article

• Ubuntu - connecting 3rd monitor fails with "xrandr: cannot find crtc for output DVI-0"

  - by MDCore

  I've got a laptop with a DVI and VGA output on the back. With everything connected it will only allow me to run 2 of the 3 monitors e.g. laptop display + VGA or DVI+VGA but not all 3. xrandr says I have 2 CRTC's, 0 and 1. The internet says I should be able to share a CRTC if the modeline is the same, and my 2 external monitors are the exact same make and model. How do I convince the software to drive all this hardware?

  Read the article

• SNMPD timeout yet netcat shows port as open

  - by Kirill Gordeenko

  SNMPD config (I have this config working on a different server): com2sec readonly default public group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 80 access MyROGroup "" any noauth exact all none none syslocation <LOCATION> syscontact <CONTACT> When I check the port from remote machine: » nc -zvu xx.xx.xx.xx 161 Connection to xx.xx.xx.xx 161 port [udp/snmp] succeeded! This also works locally (I get all the right stats): snmpwalk -v 2c -c public localhost Yet when I try same command locally or remotely with external IP: Timeout: No Response from xx.xx.xx.xx IPTables are disabled on both machines. /etc/sysconfig/snmpd looks like this: OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid" -a /etc/default/snmpd is empty.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• How to query a DHCP server to get the local DNS serves

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• How to query a DHCP server to get the local DNS serves

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• Last-modified date not showing up in indexed documents

  - by Jared

  We have tried everything, pushing feeds, setting up fields in "document dates" screen to enable all documents in the index to contain a value for Last-modified date. Nothing seems to make documents retain a "last-modified date" in the index. How does one enable a last-modified date for all documents in the index? Note: the meta value will come from an external xml source (not a database). Followed the google instructions for our gsa version (6.4.0.G.22). Yes I know the GSA version is quite old, we've been told by our google-representative support team themselves, that updating the GSA to the latest version "should" resolve the problem, and by "should" I mean, their GSA did the same thing (no last-modified date) and updating our GSA is another can of worms story :)

  Read the article

• Share a USB sound card over a network/bluetooth (Mac & PC)

  - by AlexW

  I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

  Read the article

• Why is my HDD not showing up?

  - by Mike

  I'm on Windows 7, got a new 2 TiB NON-external hard disk. When I plug it in it doesn't show up on the Disk Management list in the Computer Management window (that you get by right-clicking My Computer and selecting "Manage"). At first I thought it was broken, but I could see it using a friend's computer. I've run a full disk scan using the official tool from Western Digital, no problems. I've formatted it and partitioned it at another friends place, I've even encrypted the disk fully without any problems, then mounted it and placed a text file on it with the word "hello" inside and saved the file. When I boot my own computer the disk shows up in BIOS. So the disk is not broken. I've tried changing what SATA slot on the motherboard I stick it in. Makes no difference. After all this: Why won't my Windows 7 discover the disk???

  Read the article

• Network connectivity logs on OSX

  - by Stephen

  I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• odd system name showing up in terminal

  - by sam

  Ive been working on some command line stuff with an external developer through team viewer for work, to interact with th CL i use terminal on OSX, when working with the developer i was always watching what they were doing and i also have all the bash history. Usually upon opening terminal i get something like this Last login: Tue Sep 17 21:33:02 on ttys001 You have mail. unknown-5c:00:00:00:00:00:~ sam$ (note ive replaced some characters in the last line with 00) But today when i opened up terminal and i get this Last login: Mon Oct 21 16:49:35 on ttys000 You have mail. richies-ipad:~ sam$ Note it now says richies-ipad - any idea why this is ? I dont know any one called richie let alone let them have access to my machine. Is this something to be worried about - the fact that someone has enough access to change that ? Also what does the ttys001 part on the first line mean ?

  Read the article

• How to create chroot jail with ability to change some system settings

  - by Tadeck

  How to properly create chroot jail (on Ubuntu, or some some other Linux if not applicable) to make user able to edit system settings (eg. with ifconfig) and be able to communicate with external scripts? The use case would be to enable user to authenticate using SSH and then be able to perform very limited set of actions from command line. Unfortunately the tricky part is the access to system settings. I have considered multiple options and the alternative is to setup fake SSH server (eg. with Twisted), try to use restricted shell (however, I seem to need chroot still), or write a script on top of the shell (?).

  Read the article

• How to disable power to USB ports when laptop is in sleep mode

  - by Greg

  I have a Windows7 laptop with two external 2.5" HDDs and a cooling pad connected through USB ports. When I put the laptop to sleep, these devices are still powered on - the fan in the cooling pad is still spinning, the drives are still spinning. I want to set it all up so that they power down when in sleep. I tried setting the Allow the computer to turn off this device to save power option in the USB Root Hubs' Properties in Device Manager and enabling USB selective suspend in power options - it didn't work. As it's a laptop, BIOS options are extremely locked down, so I can't even see anything relevant to sleep in there. Is it even possible to do this?

  Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >