Search Results

Search found 35834 results on 1434 pages for 'ubuntu core'.

Page 54/1434 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

  • Cannot locate packages for Citrix install

    - by Noel Evans
    I'm trying to get a Citrix receiver installed on to Ubuntu 14.04 (64 bit) following Ubuntu's docs. The first line of instructions say to get these required packages: sudo apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 But if I paste in that line, I get this error: Reading state information... Done E: Unable to locate package libmotif4 E: Unable to locate package libxp6 E: Unable to locate package libxpm4 E: Unable to locate package libasound2 My repository settings are below. Is there anything I'm missing in there? Otherwise what do I need to do to install these? $ cat /etc/apt/sources.list deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ precise main restricted deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ trusty main restricted deb-src http://archive.ubuntu.com/ubuntu trusty main restricted #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse #Added by software-properties deb http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse deb-src http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse #Added by software-properties deb http://archive.ubuntu.com/ubuntu/ trusty-proposed main universe restricted multiverse deb http://archive.ubuntu.com/ubuntu/ trusty-backports main universe restricted multiverse

    Read the article

  • how to reinstall/repair ubuntu 12.04 after dual boot installation fails with windows 7

    - by Rini
    I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio s series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only one partition. Probably, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. So, I don't know whether the Ubuntu is still there or probably corrupted. My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks in advance. R Shukla My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks for your help! I tried to boot from the CD but I every time it give me error before disk partitioning step. Also, I am unable to start Gparted. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only ne partition. Probaply, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. Please tell me how to remove this error. Best Regards, R S

    Read the article

  • Dependency problem with mysql-server-core-5.5

    - by Tama
    When I start the Ubuntu software centre, it says I cannot do anything until the package catalog is repaired. However, repairing fails. I ran "sudo apt-get -f install" and found the problem to be: mysql-server-5.5 depends on mysql-server-core-5.5 (= 5.5.24-0ubuntu0.12.04.1); however: Version of mysql-server-core-5.5 on system is 5.5.28-0ubuntu0.12.04.2. So, the question is, how do I install that version and resolve the dependency problem?

    Read the article

  • Wireless Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Intel graphics Ubuntu 12.04.3 LTS: does not detect second monitor

    - by user206551
    I have some problems to get the second monitor working on my Ubuntu 12.04.3 LTS. If I click on the detect button it does not work. Info about my system: $uname -a Linux LabTop2 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux $cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" VERSION="12.04.3 LTS, Precise Pangolin" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" VERSION_ID="12.04" $lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) $lsmod | grep video uvcvideo 72250 0 videobuf2_core 39385 1 uvcvideo videodev 96131 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12920 1 uvcvideo videobuf2_memops 13042 1 videobuf2_vmalloc video 19116 1 i915 $xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768 default connected 1368x768+0+0 0mm x 0mm 1366x768 0.0 1368x768 0.0* Before upgrading the system, xrand -q showed my much more resolution options and the other monitor. I have tried to install intel-linux-graphics-installer but this version of ubuntu is not supported Any help will be apreciated!!

    Read the article

  • ubuntu 12.10 installation failure

    - by Eidelmaim
    Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

    Read the article

  • Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

    - by arlendo
    Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

    Read the article

  • Unable to boot Windows after installing Ubuntu 12.04 - error: invalid efi file path

    - by user113350
    I have a Laptop (ASUS X310A, I installed Ubuntu 12.04 to be side by side with Windows 7 but I seem to have gotten a problem with booting Windows 7. I used the Boot Repair twice with no results. Boot-Repair info: http://paste.ubuntu.com/1417623/ The error I get when starting Windows 7 from GRUB is: error: invalid efi file path In Boot Manager or Menu, I have 3 options now: 2x for Ubuntu (maybe cause I did boot-repair twice) 1x Windows boot manager (If I boot this it opens "ASUS Preload Wizard", it gives me the option to re-install windows losing all previous data -) When I was making the partition before installing Ubuntu, I made the new partition by making sda4 smaller and adding ext4 mounted: "\" and adding a swap area. Installed it and it didn't work, nothing worked. So i booted Ubuntu from the USB again and deleted the partitions I made and decided to make sda3 smaller and making the partitions but this time it gave me the option that I could mount sda3 on "\windows" or "\dos" I ignored it and didn't choose neither because the I know that it doesn't need to be mounted and proceeded to create what is now sda7 (ext4) and sda8 (swap area). It still didn't work so I booted from USB and did the first boot-repair, so I was able to boot Ubuntu now but not windows, but when I did it through my USB I was not able to update boot-repair, so i decided to redo the boot-repair from Ubuntu running on the Hardisk (fully updated) and it still didn't work. In GRUB this is what i see (when booting using Ubuntu as first option in Boot Menu): Ubuntu, with Linux 3.2.0-29-generic Ubuntu, with Linux 3.2.0-29-generic (recovery mode) Windows UEFI loader Windows Boot UEFI bootx64.efi.bkp Windows 7 (loader) (on /dev/sda3) Windows Recovery Environment (loader) (on /dev/sda5) I tried all the ones starting with "Windows" they all don't work Please help, Many Thanks

    Read the article

  • cant connect to internet directly on ubuntu

    - by shubham
    I have dual booted machine windows 7 with ubuntu 12.10. I dont have direct internet access in ubuntu on wired network although direct connection works in windows7. I have to connect through a proxy on ubuntu, which works fine. This is not a ubuntu version related problem as i have been getting it from ubuntu 11.04. I want to know what difference is there in ubuntu and windows 7 which creates such results and how to fix it?

    Read the article

  • Ubuntu 10.04 LTS Server - fresh install - failed apt-get update

    - by user87227
    Good day and greetings to all, I just did a fresh installation of Ubuntu 10.04 LTS server without any issues. However, the apt-get update or aptitude update is giving the following errors: a. bzip2:(stdin) is not bzip2 file.ign for all lines plus the following errors : etched 3,582B in 0s (74.1kB/s) Reading package lists... W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: //security.ubuntu.com lucid-security Release: The following signatures were invalid: NODATA 1 NODATA 2 W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: //in.archive.ubuntu.com lucid Release: The following signatures were invalid: NODATA 1 NODATA 2 W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: in.archive.ubuntu.com lucid-updates Release: The following signatures were invalid: NODATA 1 NODATA 2 W: Failed to fetch security.ubuntu.com/ubuntu/dists/lucid-security/Release W: Failed to fetch in.archive.ubuntu.com/ubuntu/dists/lucid/Release W: Failed to fetch in.archive.ubuntu.com/ubuntu/dists/lucid-updates/Release W: Some index files failed to download, they have been ignored, or old ones used instead. Please guide in resolving this error. TIA Regards Venu

    Read the article

  • How to install Ubuntu 13.10 on Hybrid Disk alongside Windows 8.1

    - by user205691
    I am having trouble installing Ubuntu 13.10 on HP Envy 4-1046tx ultrabook. When i bought this, it came with windows 7 pre-installed, but i upgraded it to 8 and now recently to 8.1. But somehow, i feel 8.1 is slower or something went wrong with the upgrade and made my system slow. I want to try Dual booting Ubuntu 13.10 with windows 8.1 The system recovery drive has windows 7 recovery files. SSD has 4GB allocated to windows 8 (i think for hibernation/rapid start). 25GB of SSD is free and i want to install ubuntu on this SSD pointing it to "/" I will also shrink the windows partition (the only other partition available apart from recovery & SSD) to free up 100GB and allocate this space to "/home" during ubuntu installation. I tried the above steps while on windows 8, but not successful. Ubuntu installation went fine, but the grub was not loaded. I tried to deploy linux via EasyBCD, but after that also, selecting linux in the boot would load grub on command prompt and do nothing. While ubuntu installation, i also deleted the raid drivers with sudo dmraid -rE, but still ubuntu didnt recognize my windows. I think i am missing some steps, so this time i want to do it right with proper info before starting the process. My requirements: dual boot Ubuntu with windows 8.1 c:\ shrinked windows with 300GB on sda1, 100GB for /home on sda1 & ubuntu installed on 25GB SSD volume sda2 (this is mSata i think) GRUB or EFI that helps me load both OS properly without breaking anything SWAP partition can be added if needed on sda1 (4gb?)? I have backed up my drive and have a 16GB usb3.0 with ubuntu loaded. I hope i have mentioned everything i need and know.. All i need now is some guidance and what to do right so that this installation goes as planned :)

    Read the article

  • cant get ubuntu to work with windows 8

    - by John Mark High
    ive been trying to dual boot Ubuntu with windows 8 but so far I haven't been able too. the laptop im using is a HP Pavilion g6-2240sa pre-installed with windows 8. ive made the bootbale USB with Ubuntu 12.10, it installs but when I restart the computer boot straight into windows, no grub boot options. I can get into Ubuntu once by doing an advanced restart and booting from the Ubuntu partition. I can use Ubuntu fine but once I restart or shutdown, I do the advanced restart again and the Ubuntu partition is now gone and I have to reinstall. i used this tutorial to install Ubuntu, http://www.youtube.com/watch?v=wNCSbTyUzoM After i have to reinstall and still no grub boot menu, i used the boot repair to re-install it. once i rebooted the computer it went straight to windows again and the Ubuntu partition was gone. can i dual boot windows 8 and unbuntu 12.10 with the grub so i can pick what OS to boot into when the computer is starting, and without the partition going AWOL???? Thanks in advance

    Read the article

  • i cant use ubuntu software manager

    - by hossein
    It's the first time that I use ubuntu and I can't use the ubuntu software manager, when I type update codes in terminal it shows this error Reading package lists... Error! W: GPG error: http://ir.archive.ubuntu.com precise Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/ir.archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened.

    Read the article

  • All my Ubuntu VMs have apt-get update problems

    - by kashani
    I'm running Virtualbox 4.1 on an x86_64 Windows 7 host. I've got a collection of 12.04 and 10.04 LTS VMs I use to create debs for work. In the last week I started noticing problems on the 12.04 VMs. Tried the usual apt-get clean bit which didn't help. I rolled a new 11.10 VM for testing a Worpress upgrade. This VM has never been able to run apt-get update without errors. The interesting errors look like this: Get: 8 http://security.ubuntu.com oneiric-security/main Translation-en_US [344 B] 14% [7 Sources 48686/877 kB 6%] [Waiting for headers]bzip2: (stdin) is not a bzip2 file. Hit http://security.ubuntu.com oneiric-security/multiverse Translation-en Hit http://security.ubuntu.com oneiric-security/restricted Translation-en Hit http://security.ubuntu.com oneiric-security/universe Translation-en 22% [7 Sources 127526/877 kB 15%] [Waiting for headers]/usr/bin/xz: (stdin): File format not recognized and ends with /usr/bin/xz: (stdin): File format not recognized Ign http://us.archive.ubuntu.com oneiric/main Translation-en_US Ign http://us.archive.ubuntu.com oneiric-updates/main Translation-en_US Fetched 18.5 MB in 47s (392 kB/s) W: GPG error: http://us.archive.ubuntu.com oneiric InRelease: File /var/lib/apt/lists/partial/us.archive.ubuntu.com_ubuntu_dists_oneiric_InRelease doesn't start with a clearsigned message W: GPG error: http://security.ubuntu.com oneiric-security InRelease: File /var/lib/apt/lists/partial/security.ubuntu.com_ubuntu_dists_oneiric-security_InRelease doesn't start with a clearsigned message xv-utils, lzma, etc are all installed. I've reinstalled the VM from scratch three times and up at the same point.

    Read the article

  • Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

    - by user287602
    Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

    Read the article

  • Create option to load Ubuntu or Windows 7 at start-up

    - by AXK
    We have a new Dell Optiplex 790 desktop with Windows 7 and just installed Ubuntu 12.04 on it using a USB stick that was configured as a boot drive. We created a new partition for Ubuntu during installation using the partition editor that comes up during installation. Everything seems to have gone fine with the installation except that, unexpectedly, there is no option to boot up Ubuntu when the computer is started. We just start the computer and Windows starts up with no option to ever start Ubuntu. The only way we have gotten Ubuntu to start is by putting the USB stick used for installation back into the computer and having the computer boot from it. Then GRUB shows up and the Ubuntu OS that we installed starts up (rather than the live-CD version on the USB stick). Previous times we have installed Ubuntu, GRUB shows up when we start the computer and we can choose among the various OSes installed. Can anyone suggest what to do? We want to have the option to launch either Windows 7 or Ubuntu 12.04 when we start the computer, with the default being Windows 7. Right now there is no option and Windows 7 just starts the way it did before we installed Ubuntu. Note that if we hit F1 soon after starting the computer, we get some sort of Windows bootloader (not sure of exact name) but there is no option for Ubuntu; just Windows 7. Also note that if we hit the shift key soon after starting the computer, as some help pages have suggested, nothing happens (Windows 7 is loaded as usual). Thanks in advance!

    Read the article

  • Ubuntu 12.10 wont boot

    - by John Mark High
    im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

    Read the article

  • How can redirect pages from old core PHP site to new Joomla site?

    - by pkachhia
    We have our old site into core PHP and we have developed it again into Joomla 1.5 last year( because of some limitations we have to build it into 1.5). Now the problem is the URL of sites changed as we have use SEO URLS on joomla. In between we have use .htaccess to redirect user from old URL to new like this Redirect /pages/oldpage.php http://www.mydomain.com/products/category/new_page.html Is this good practice to redirect user to new URL or not?(we have used same server). One more thing, We have used splash page on our site, and to set up it we have made some changes and because of it one of the important link is not working, and it is http://www.mydomail.com/index.php How can I get rid of it? I have used DirectoryIndex splash.html home.html index.php in .htaccess to open splash page first when someone open my site http://www.mydomain.com. Note: my website hosted on dedicated ubuntu server.

    Read the article

  • Ubuntu install can't find hard drives

    - by Casey Hungler
    I recently got a Dell Inspiron Special Edition 7720 computer. I am trying to install Ubuntu along side Windows. When I use the WUBI installer, the installation of Ubuntu works as long as I do not boot into Windows; if I boot into Windows, when I go back into Ubuntu, I am given a variety of error messages which claim to have corrupt or missing kernel/root directory, etc. I have been working with this problem for about a week, and have reinstalled Ubuntu MANY times. So far, I have eliminated all of the following problems: Corrupt WUBI installation (Downloaded multiple times, used on other systems), I have tried using a CD and a flash drive, both of which work on other computers. I know that no program within Ubuntu is creating the problem. I know that others have successfully installed Ubuntu on a computer with my operating system (Windows 7 SP1). This is a much shortened version of the original question, which has been up for about 5 days, and included a more detailed description of the problem, but left everyone clueless as to the source of this problem. When I spoke with the Dell service technician who came over today to replace my keyboard, he suggested that the driver for my HDD was so new that it was not compatible with the current version of Ubuntu. His reasoning is as follows: 1) During an install from a flash drive or CD, where I am supposed to get the option to wipe my system or create a dual boot, I get a window that asks me to select a hard drive partition, but none are listed. 2) This model of computer was made public in June of this year, while Ubuntu was released in April Adopting this theory, it would seem to me that the WUBI install fails after booting into Windows because Ubuntu can no longer find the files that it needs to load. Does this theory seem at all plausible to anyone? I just want to install Ubuntu and have it stay on my computer. I don't care how I put it there, I just need it to work, so I would TRULY appreciate any advice or suggestions anyone could give. Thanks so much for your time and support!!!

    Read the article

  • Dell Powerdge840 2.4GHz 64 bit quad core

    - by newb64bit
    I am having an issue, where I have changed the boot order to cdrom and turned off hd boot all together and still my system is unable to detect ubuntu and claims, no boot device found. Some additional information: When this same cd is inserted and dell is booted into win 2003 server (which is what is installed on this machine), it detects the cd drive but not the cd at all (keeps asking me to insert disc) I have also created a bootable flash drive using LinuxLive USB creator and when this is selected in boot order again am told no boot device detected. I was speaking to dell and they suggested perhaps there are no drivers on the actual ubuntu installation for the hardware on this Dell and hence the failure of this dell to detect the ubuntu cd. Now, I don't know too much about computers, but this last bit confused me a bit. If the system detects the hardware (when it is booting it sees the cd rom and in bios it sees when the flash drive is connected), then shouldn't it be able to read what is on those drives? However, if there is some firmware or software install that needs to happen, could someone please tell me where to find the correct drivers for ubuntu and dell poweredge to work together? Shall I be installing the desktop version or the server edition, also, 32 bit or 63 bit? Thank you in advance.

    Read the article

  • How to completely remove Ubuntu?

    - by les02jen17
    I installed Ubuntu using Wubi installer, but I couldnt boot to it. So I uninstalled it on the Control Panel. Then I tried the full installation wherein it boots to the Ubuntu environment. After installing Ubuntu there, I couldnt boot to my Windows 7 anymore! So in an attempt to salvage the whole thing, I inserted the Ubuntu CD again and chose Erase Ubuntu and Reinstall. (I was wondering, why wasn't there an option to just "Erase Ubuntu"?) I did that though, and I got my Windows 7 back. But upon checking my drives via the "Create your own partition scheme" (not sure if it's the exact words) I saw that one of my partitions still has Ubuntu on it, and there's no way I can delete it if I don't overwrite another Ubuntu! I can't access that partition on windows 7 either! Need help!

    Read the article

  • 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

    - by Tejaswi Rana
    I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

    Read the article

  • Marrying Core Animation with OpenGL ES

    - by Ole Begemann
    Edit: I suppose instead of the long explanation below I might also ask: Sending -setNeedsDisplay to an instance of CAEAGLLayer does not cause the layer to redraw (i.e., -drawInContext: is not called). Instead, I get this console message: <GLLayer: 0x4d500b0>: calling -display has no effect. Is there a way around this issue? Can I invoke -drawInContext: when -setNeedsDisplay is called? Long explanation below: I have an OpenGL scene that I would like to animate using Core Animation animations. Following the standard approach to animate custom properties in a CALayer, I created a subclass of CAEAGLLayer and defined a property sceneCenterPoint in it whose value should be animated. My layer also holds a reference to the OpenGL renderer: #import <UIKit/UIKit.h> #import <QuartzCore/QuartzCore.h> #import "ES2Renderer.h" @interface GLLayer : CAEAGLLayer { ES2Renderer *renderer; } @property (nonatomic, retain) ES2Renderer *renderer; @property (nonatomic, assign) CGPoint sceneCenterPoint; I then declare the property @dynamic to let CA create the accessors, override +needsDisplayForKey: and implement -drawInContext: to pass the current value of the sceneCenterPoint property to the renderer and ask it to render the scene: #import "GLLayer.h" @implementation GLLayer @synthesize renderer; @dynamic sceneCenterPoint; + (BOOL) needsDisplayForKey:(NSString *)key { if ([key isEqualToString:@"sceneCenterPoint"]) { return YES; } else { return [super needsDisplayForKey:key]; } } - (void) drawInContext:(CGContextRef)ctx { self.renderer.centerPoint = self.sceneCenterPoint; [self.renderer render]; } ... (If you have access to the WWDC 2009 session videos, you can review this technique in session 303 ("Animated Drawing")). Now, when I create an explicit animation for the layer on the keyPath @"sceneCenterPoint", Core Animation should calculate the interpolated values for the custom properties and call -drawInContext: for each step of the animation: - (IBAction)animateButtonTapped:(id)sender { CABasicAnimation *animation = [CABasicAnimation animationWithKeyPath:@"sceneCenterPoint"]; animation.duration = 1.0; animation.fromValue = [NSValue valueWithCGPoint:CGPointZero]; animation.toValue = [NSValue valueWithCGPoint:CGPointMake(1.0f, 1.0f)]; [self.glView.layer addAnimation:animation forKey:nil]; } At least that is what would happen for a normal CALayer subclass. When I subclass CAEAGLLayer, I get this output on the console for each step of the animation: 2010-12-21 13:59:22.180 CoreAnimationOpenGL[7496:207] <GLLayer: 0x4e0be20>: calling -display has no effect. 2010-12-21 13:59:22.198 CoreAnimationOpenGL[7496:207] <GLLayer: 0x4e0be20>: calling -display has no effect. 2010-12-21 13:59:22.216 CoreAnimationOpenGL[7496:207] <GLLayer: 0x4e0be20>: calling -display has no effect. 2010-12-21 13:59:22.233 CoreAnimationOpenGL[7496:207] <GLLayer: 0x4e0be20>: calling -display has no effect. ... So it seems that, possibly for performance reasons, for OpenGL layers, -drawInContext: is not getting called because these layers do not use the standard -display method to draw themselves. Can anybody confirm that? Is there a way around it? Or can I not use the technique I laid out above? This would mean I would have to implement the animations manually in the OpenGL renderer (which is possible but not as elegant IMO).

    Read the article

  • Core Data Model Design Question - Changing "Live" Objects also Changes Saved Objects

    - by mwt
    I'm working on my first Core Data project (on iPhone) and am really liking it. Core Data is cool stuff. I am, however, running into a design difficulty that I'm not sure how to solve, although I imagine it's a fairly common situation. It concerns the data model. For the sake of clarity, I'll use an imaginary football game app as an example to illustrate my question. Say that there are NSMO's called Downs and Plays. Plays function like templates to be used by Downs. The user creates Plays (for example, Bootleg, Button Hook, Slant Route, Sweep, etc.) and fills in the various properties. Plays have a to-many relationship with Downs. For each Down, the user decides which Play to use. When the Down is executed, it uses the Play as its template. After each down is run, it is stored in history. The program remembers all the Downs ever played. So far, so good. This is all working fine. The question I have concerns what happens when the user wants to change the details of a Play. Let's say it originally involved a pass to the left, but the user now wants it to be a pass to the right. Making that change, however, not only affects all the future executions of that Play, but also changes the details of the Plays stored in history. The record of Downs gets "polluted," in effect, because the Play template has been changed. I have been rolling around several possible fixes to this situation, but I imagine the geniuses of SO know much more about how to handle this than I do. Still, the potential fixes I've come up with are: 1) "Versioning" of Plays. Each change to a Play template actually creates a new, separate Play object with the same name (as far as the user can tell). Underneath the hood, however, it is actually a different Play. This would work, AFAICT, but seems like it could potentially lead to a wild proliferation of Play objects, esp. if the user keeps switching back and forth between several versions of the same Play (creating object after object each time the user switches). Yes, the app could check for pre-existing, identical Plays, but... it just seems like a mess. 2) Have Downs, upon saving, record the details of the Play they used, but not as a Play object. This just seems ridiculous, given that the Play object is there to hold those just those details. 3) Recognize that Play objects are actually fulfilling 2 functions: one to be a template for a Down, and the other to record what template was used. These 2 functions have a different relationship with a Down. The first (template) has a to-many relationship. But the second (record) has a one-to-one relationship. This would mean creating a second object, something like "Play-Template" which would retain the to-many relationship with Downs. Play objects would get reconfigured to have a one-to-one relationship with Downs. A Down would use a Play-Template object for execution, but use the new kind of Play object to store what template was used. It is this change from a to-many relationship to a one-to-one relationship that represents the crux of the problem. Even writing this question out has helped me get clearer. I think something like solution 3 is the answer. However if anyone has a better idea or even just a confirmation that I'm on the right track, that would be helpful. (Remember, I'm not really making a football game, it's just faster/easier to use a metaphor everyone understands.) Thanks.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >