Search Results

Search found 39968 results on 1599 pages for 'access manager'.

Page 540/1599 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

  • Set nginx.conf to deny all connections except to certain files or directories

    - by Ben
    I am trying to set up Nginx so that all connections to my numeric ip are denied, with the exception of a few arbitrary directories and files. So if someone goes to my IP, they are allowed to access the index.php file, and the phpmyadmin directory for example, but should they try to access any other directories, they will be denied. This is my server block from nginx.conf: server { listen 80; server_name localhost; location / { root html; index index.html index.htm index.php; } location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/http/nginx/$fastcgi_script_name; include fastcgi_params; } } How would I proceed? Thanks very much!

    Read the article

  • Change Windows Service Priority

    - by SchlaWiener
    I have a windows service that needs to run with High Priority. At the end of the day I want to use this script to modify the priority after service startup: Const HIGH = 256 strComputer = "." strProcess = "BntCapi2.exe" Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") Set colProcesses = objWMIService.ExecQuery _ ("Select * from Win32_Process Where Name = '" & strProcess & "'") For Each objProcess in colProcesses objProcess.SetPriority(HIGH) Next But currently I am not able to change the priority, even with the taskmanger. The taskmananger throws an "Access Denied" error, but I am logged on as administrator and I changed the user account of the service to administrator, too. I still get the "access denied" message when trying to change the priority. Any ideas what permission I need to do that?

    Read the article

  • Simple NAT router for ESX

    - by Evan M.
    Hi Guys, I'm looking for a simple virtual appliance that I can deploy to my ESX environment to use as a virtual NAT router / firewall to create an isolated network that I can easily give internet access too. Basic setup: ESX Host, has 2 vswitches configured: 1 is connected to the physical LAN, the other is isolated. I need an appliance that I can add 2 vNICs to, and attach one to the isolated vSwitch, the other to the LAN, to give the isolated network outbound access (so it can reach the internet). Anyone have an appliance that I can setup quickly to do so? Thanks.

    Read the article

  • Network card dies when trying to wake up laptop from sleep

    - by Bugmaster
    I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

    Read the article

  • how do I set up a virtual host (it's not working, and I've done everything right)

    - by piratepartypumpkin
    My router redirects port 80 to port 8080. My router works fine and my domain name is routed properly. This is my virtual hosts file: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /home/admins/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> I can access my website by entering "mywebsite.com:8080" but I cannot access it by entering "mywebsite.com" For further information, this is a part of my httpd.conf: Listen 8080 Servername localhost:8080 DocumentRoot "/home/admins/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/home/admins/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

    Read the article

  • Finding proof of server being compromised by Black Hole Toolkit exploit

    - by cosmicsafari
    I recently took over maintenance of a company server. (Just Host, C Panel, Linux server), theres a tonne of websites on it which i know nothing about. It had came to my attention that a client had attempted to access one of the websites hosted on this server and was met with a warning from windows defender. It had blocked access because it said the website had been compromised by the Black Hole Toolkit or something to that effect. Anyway I went in and updated various plugins and deleted some old suspect websites. I have since ran the website in question through a few online malware scanners and its comes up clean everytime. However im not convinced. Do any of you guys know extensive ways i can check that the server isn't still compromised. I have no way to install any malware scanners or anti virus programs on the server as it is horribly locked down by Just Host.

    Read the article

  • Firefox 16 freezes or crashes when playing Youtube or flash videos

    - by Matt
    Using the most up to date Firefox (16.0.2), and Adobe Flash. Whenever I go to any youtube video or flash video on another page, Firefox starts the video, but only plays the audio, and then when I make any click on anywhere within Firefox, it gets completely stuck. It freezes and the only way to get it to close is to go to task manager. I restarted in Safe Mode and it did the same thing. Windows 7 64 bit.

    Read the article

  • Does the upload file INPUT HTML element give any personal information away?

    - by Senseful
    I'm wondering what personal information the file input (<input type="file">) element gives the website. I noticed that it does show the file name and the website does seem to have access to it. What about the file's path? If the file is located in My Documents, they could find out the user name via the path (e.g. C:\Documents and Settings\Bob\My Documents) which many times is the actual user's name that is using the website. What information do most modern browsers allow the website to access when a user uses the file input element? Could JavaScript somehow be used to gain more information? What about when plugins (such as Flash or Java) implement file uploading?

    Read the article

  • Can I enable gzip/deflate in IIS6 without restart?

    - by nibblebot
    I have gone through the steps of enabling static compression for my IIS 6.0 site: enable it in IIS Manager enable edit-while-running add the extensions i need to compress directly to the metabase: js, css wait for the metabase.xml to update to the latest major history version It is still not compressing JS and CSS. Is there anyway to enable this without iisreset?

    Read the article

  • Signal strength and Speed of wireless network

    - by Tim
    As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

    Read the article

  • How to export opened tabs in Chrome?

    - by Ieyasu Sawada
    Are there any extensions for Chrome that allow me to export all currently opened tabs as a text file, containing all the URLs of those tabs? I don't necessarily need it to be a text file if there is another way that you can think of. My goal is to share the URLs with someone via email. I'm currently using Session Manager to save my open tabs but it has no functionality to export them as described above.

    Read the article

  • Hard drive caught malware and all folders are in shortcuts

    - by Ammar
    I have an external hard drive from Seagate. I think it accidently caught a malware/virus, since all the files in there became shortcut folders. I have very important folders and now I cannot access them at all. I did not have an antivirus program; I just formatted the PC and forgot to install one. Just recently, I installed Avira and it caught the malware, but since I removed the malware via Avira, I can't access anything now. Please help me on what I need to do. I am really lost.

    Read the article

  • IIS 7 throws 401 responses on application whose physical directory has been shared

    - by tonyellard
    I have an IIS 7, Windows Server 2008 R2 box with a relatively fresh install. I've deployed a .NET 2.0 application using windows autentication to the server, and from the default website, added it as an application. I updated the IIS authentication to enable Windows Authentication. When I went to share out the physical directory for the application so that a developer could deploy updates, the users began to receive 401 errors. I can reliably recreate the issue by sharing out the directory of any newly created application. The IIS user has the necessary read/write access to the directory. What do I need to do to keep web users from receiving 401's while at the same time allowing this developer to have access to the physical directory for deployments? Thanks in advance!

    Read the article

  • Routing table with two NIC adapters in libvirt/KVM

    - by lzap
    I created a virtual NAT network (192.168.100.0/24 network) in my libvirt and new guest with two interfaces - one in this network, one as bridged (10.34.1.0/24 network) to the local LAN. The reason for that is I need to have my own virtual network for my DHCP/TFTP/DNS testing and still want to access my guest externally from my LAN. On both networks I have working DHCP, both giving them IP addresses. When I setup NAT port forwarding (e.g. for ssh), I can connect to the eth0 (virtual network), everything is fine. But when I try to access the eth1 via bridged interface, I have no response. I guess I have problem with my routing table - outgoing packets are routed to the virtual NAT network (which has access to the machine I am connecting from - I can ping it). But I am not sure if this setup is correct. I think I need to add something to my routing table. # ifconfig eth0 Link encap:Ethernet HWaddr 52:54:00:B4:A7:5F inet addr:192.168.100.14 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:feb4:a75f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16468 errors:0 dropped:27 overruns:0 frame:0 TX packets:6081 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22066140 (21.0 MiB) TX bytes:483249 (471.9 KiB) Interrupt:11 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 52:54:00:DE:16:21 inet addr:10.34.1.111 Bcast:10.34.1.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fede:1621/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4911 (4.7 KiB) TX bytes:9 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.34.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1 0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0 Network I am trying to connect from is different than network the hypervisor is connected to: 10.36.0.0. But it is accessible from that network. So I tried to add new route rule: route add -net 10.36.0.0 netmask 255.255.0.0 dev eth1 And it is not working. I thought setting correct interface would be sufficient. What is needed to get my packets coming through?

    Read the article

  • Finding a private (NAT) host's IP using historic destination data

    - by l0c0b0x
    The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

    Read the article

  • OWA draft folder doesn't sync up wint Outlook 2007 (when using Citrix)

    - by George
    I have a user logging in to Citrix Server (on Windows 2003) to use Outlook 2007. In OWA, he sees all his drafts in Draft Folder and can easily access them, but when he is Citrix, he can see the folder, but not the messages. I had him check Normal and Favorite Folders under View - Navigation Pane as well as execute outlook /cleanviews to no help. I should also clarify, we host exchange locally and it syncs up with Outlook 2007 in Citrix. Remote users use either OWA for access or login to Citrix and use Outlook 2007. In his case ALL folders appear in Outlook 2007, but draft folder doesn't show any saved messages, even though in OWA messages are there and he can edit, delete and send them. Please, help! Thanks!!!

    Read the article

  • How to connect with MySQL server if it won't connect via the socket?

    - by cwd
    I have an account on a shared server. I have jailshell access and also PhpMyAdmin. I want to run mysql commands via SSH but I'm getting an error: $ mysql -u mySqlUser -p mySqlPw Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' I can connect with PHP and phpMyAdmin, so would it be possible to call mysql from the shell and have it connect via an ip and port instead of the socket? The file /var/lib/mysql/mysql.sock does not exist - maybe that is intentional, and the only thing in /etc/my.cnf is [mysqld] skip-innodb More Info I don't have access to change system settings. I did a search in /var for mysql.sock but found nothing. However, phpMyAdmin might be connecting via a socket somehow: Really it would just be great if I could connect via IP. Also tried these two syntaxes: $ mysql -u mySqlUser -p mySqlPw -h localhost $ mysql -u mySqlUser -p mySqlPw -h localhost -P 3306 Both with the same result: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

    Read the article

  • single sign-on integrating SVN

    - by ramdaz
    I need to authenticate my windows users on to a Linux Server which will act as a primary authentication source. Users need to be authenticated and use their access to run SVN or Mercurial ( with something like Tortoise SVN client), or some versioning system. The versioning system need to be authenticated against the Linux Server's authentication source, and users need to use their Windows login username and password to server. I'd have attempted to do this normally on Samba. But is there a better choice? Also how do you create a roaming profile? That is anyone should be able to access their SVN from any PC as long as they use their right Windows username and password

    Read the article

  • Compressed disk image on Linux

    - by Aaron Digulla
    I just got my new computer with a much bigger harddisk. I think I copied all important files over but just to be sure, I'd like to keep a disk image of my old disk. To save space, I'd like to compress it but I didn't find an option to mount a compressed image. My goals: Result must be easy to access No need to decompress the whole thing before I can access anything Files should be quick to locate - no TAR/CPIO archive Necessary space should be less than just copying the files over So ideally, I'm looking for a read-only, compressed file system which I can create in a file and which grows automatically.

    Read the article

  • Windows 7 connect to Lion file sharing

    - by Automaton
    Trying to access my Mac from a Windows 7 computer, I fail with the infamous error 86 incorrect password. Now this appears to be a well-known problem with countless threads on the internet giving as many "solutions" as there are discussion threads about it (mostly ranging from installing third-party commercial samba servers, to switching to some other protocol, to compiling a plain-vanilla Samba installation - the latter which I will probably do when I give up this :) ) I am stubborn, and I believe there must be some problem here that can be solved or worked around, but there is surprisingly little detail about this problem. It appears to have something to do with a mismatch of authentication methods. Trying to run samba in debug mode: sudo /usr/sbin/smbd -debug -stdout gets me this output when trying to access it from Win 7 ... smb1_dispatch_one [smb_dispatch.cpp:377] dispatching SMB_COM_SESSION_SETUP_ANDX smb1_dispatch_session_setup [session_setup.cpp:261] FIXME erase existing sessions log_gss_error [gssapi_mechanism.cpp:97] gssapi: gss-code: Miscellaneous failure (see text) log_gss_error [gssapi_mechanism.cpp:113] gssapi: mech-code: unknown mech-code 22 for mech unknown What is the problem here, and how do I fix it?

    Read the article

  • How can I password-protect a Mac shared folder on a Windows workgroup?

    - by Phillip Oldham
    We have a Mac-mini running 10.5.8 which already acts as a fileserver for our simple Windows (mixed XP/Vista) workgroup. The Mac-mini is on the same workgroup and the files are shared via SMB, FTP, and AFP. Basic file-sharing is working, and has been for some time. We'd now like to add an additional directory/share which can be secured by a password so that only a small number on the network have access. Is this possible? I've already tried creating the additional folder on the mac system, adding it to the shared folders, and limiting it to a specific "shared user", however it's not possible to log-in from an XP machine. Adding a sub-directory to the currently working share and giving limiting it's access to the shared user doesn't work either.

    Read the article

  • How to change physical path of virtual directory in IIS7

    - by Tomek
    When you have multiple websites and each of them maps the same physical path as virtual directory, how to quickly change the physical path of that virtual directory for all websites? Note: I don't want to do use IIS Manager. I tried changing the path (find and replace) in %SYSTEM%\system32\inetsrv\config\applicationHost.config, then restarted IIS, but the change hasn't taken effect. What am I missing?

    Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >