Search Results

Search found 19555 results on 783 pages for 'job performance'.

Page 541/783 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• SQL Server Database Settings

  - by rbishop

  For those using Data Relationship Management on Oracle DB this does not apply, but for those using Microsoft SQL Server it is highly recommended that you run with Snapshot Isolation Mode. The Data Governance module will not function correctly without this mode enabled. All new Data Relationship Management repositories are created with this mode enabled by default. This mode makes SQL Server (2005+) behave more like Oracle DB where readers simply see older versions of rows while a write is in progress, instead of readers being blocked by locks while a write takes place. Many common sources of deadlocks are eliminated. For example, if one user starts a 5 minute transaction updating half the rows in a table, without snapshot isolation everyone else reading the table will be blocked waiting. With snapshot isolation, they will see the rows as they were before the write transaction started. Conversely, if the readers had started first, the writer won't be stuck waiting for them to finish reading... the writes can begin immediately without affecting the current transactions. To make this change, make sure no one is using the target database (eg: put it into single-user mode), then run these commands: ALTER DATABASE [DB] SET ALLOW_SNAPSHOT_ISOLATION ONALTER DATABASE [DB] SET READ_COMMITTED_SNAPSHOT ON Please make sure you coordinate with your DBA team to ensure tempdb is appropriately setup to support snapshot isolation mode, as the extra row versions are stored in tempdb until the transactions are committed. Let me take this opportunity to extremely strongly highly recommend that you use solid state storage for your databases with appropriate iSCSI, FiberChannel, or SAN bandwidth. The performance gains are significant and there is no excuse for not using 100% solid state storage in 2013. Actually unless you need to store petabytes of archival data, there is no excuse for using hard drives in any systems, whether laptops, desktops, application servers, or database servers. The productivity benefits alone are tremendous, not to mention power consumption, heat, etc.

  Read the article

• Sys Admins are kind of like gods, aren't they? [closed]

  - by user75798

  A systems administrator has root access to the entire system. There is nothing they cannot do. They are omnipotent. Their power is absolute. Nothing dan stand before them. Like Sauron, the Dark Lord, they do not share power. There can be but one root. Else contradiction at the most fundamental level is possible, and that can not be tolerated. The sys admin's power is unconditional and non-negotiable. To be a sys admin is like being a god. (And if they are a god, what is the religion?) There is an old saying that absolute power corrupts absolutely. I wonder whether being a sys admin has ended up warping an individual. Perhaps a sys admin has become crazed or even gone berserk? Surely sys admins must need to be very level headed people. For example, imagine being 'the' sys admin for the NSA. (What an awesome job that would be!) Think about the access to data, the encryption keys, the secrets... Perhaps one day a sys admin might go bonkers, turn up for work and 'uninstall the entire NSA'! :) But you would have the same sorts of responsibilities working at a bank or other organization. I wonder whether much emphasis is put on ensuring that sys admins are level headed in the first place and kept sweet in the second. Do they get paid well? I am sure they do not receive half of what they are worth, considering all the hard earned knowledge they have had to gain and the massive responsibility they have.

  Read the article

• Oracle OpenWorld 2012 is Around the Corner - Discover AutoVue Activities

  - by Pam Petropoulos

  Planning to attend Oracle OpenWorld 2012?  If so, be sure to check out the various AutoVue Enterprise Visualization activities that you can take advantage of while in San Francisco. AutoVue Sessions: CON8381 - Streamline PLM Design-to-Manufacturing Processes with AutoVue Visualization   Click here for full session description. Date: Monday, October 1, 2012 Time: 10:45 a.m. – 11:45 a.m. Location: Intercontinental Hotel - Telegraph Hill Customer Speaker: Siew Yeow Loye, Global Foundries   CON8385 - Optimize Asset Performance and Reliability with AutoVue Visualization   Click here for full session description. Date:Thursday, October 4, 2012 Time: 2:15 p.m. – 3:15 p.m. Location: Palace Hotel – Gold Ballroom AutoVue Demo Pods: Demo   Demo ID: 3122   AutoVue: PLM & Enterprise Visualization Moscone West; Workstation: W-082 Demo ID: 3001  Oracle E-Business Suite Enterprise Asset Management and AutoVue Visualization Solutions Palace Hotel Level 2 HPU-008   Customers are also invited to attend the Oracle OpenWorld 2012 Supply Chain Management Customer Reception on Tuesday, October 2, 2012. This year's event is being held at ROE Lounge, located just 2 blocks from Moscone Center, and offers a casual and upbeat atmosphere so you can mix and mingle with friends and colleagues. This event sold out last year and space is again limited so Register Today. Date: Tuesday, October 2, 2012 Time: 6:00 p.m. – 8:00 p.m. Location: ROE Lounge, 651 Howard Street, San Francisco   For additional information regarding AutoVue sessions, demos, and activities be sure to review the AutoVue FocusOn Document.   Join us at Oracle OpenWorld, September 30–October 4, 2012 and discover new products, solutions, and practices to make you even more successful in your job and in your industry.

  Read the article

• Ensure Payroll Success with PeopleSoft Year-End Training for U.S. and Canada

  - by Breanne Cooley

  Year-end payroll processing and reporting is a requirement for your business. If you're responsible for completing these processes in either Canada or the United States using the PeopleSoft Payroll application, and if you're new to PeopleSoft Payroll or to performing these processes, consider enrolling in Oracle University's expert training. Our PeopleSoft Payroll specialists will guide you through the necessary steps to ensure you can smoothly and successfully perform your job. Training is specific to the country for which you are performing the processing and reporting. Training lasts one day and is delivered in our Live Virtual Class Format, which helps you avoid travel during this busy season. Here's the training we recommend: PeopleSoft Year-End Payroll - U.S. This course teaches you how to complete U.S. year-end processing and reporting using PeopleSoft Payroll for North America, step-by-step. Update tax reporting setup tables and update employees' income and tax records. Load each employee's year-end data into a single year-end record for processing and reporting.  Identify reports needed to reconcile the year-end data. Correct tax balances and other data as necessary. Generate final print and online W-2 forms and prepare the electronic file for the Social Security Administration.  Enter corrected W-2 information and print a W-2c form. Report periodic retirement distributions and related tax withholding amounts on form 1099-R.   Please Note: this course is intended for organizations using PeopleSoft release 8.81 or higher. PeopleSoft Year-End Payroll – Canada This course covers the steps necessary to perform Canadian year-end processing using Oracle's PeopleSoft Payroll for North America. Explore adjustments, balances, year-end slip processing, common pitfalls and errors and balancing reports.  Produce accurate year-end reporting results such as T4, T4A, RL-1 and RL-2.  Please Note: this course is intended for organizations using PeopleSoft release 8.81 or higher. See you in class! -Oracle University Marketing Team 

  Read the article

• Purpose oriented user accounts on a single desktop?

  - by dd_dent

  Starting point: I currently do development for Dynamics Ax, Android and an occasional dabble with Wordpress and Python. Soon, I'll start a project involving setting up WP on Google Apps Engine. Everything is, and should continue to, run from the same PC (running Linux Mint). Issue: I'm afraid of botching/bogging down my setup due to tinkering/installing multiple runtimes/IDE's/SDK's/Services, so I was thinking of using multiple users, each purposed to handle the task at hand (web, Android etc) and making each user as inert as possible to one another. What I need to know is the following: Is this a good/feasible practice? The second closest thing to this using remote desktops connections, either to computers or to VM's, which I'd rather avoid. What about switching users? Can it be made seamless? Anything else I should know? Update and clarification regarding VM's and whatnot: The reason I wish to avoid resorting to VM's is that I dislike the performance impact and sluggishness associated with it. I also suspect it might add a layer of complexity I wish to avoid. This answer by Wyatt is interesting but I think it's only partly suited for requirements (web development for example). Also, in reference to the point made about system wide installs, there is a level compromise I should accept as experessed by this for example. This option suggested by 9000 is also enticing (more than VM's actually) and by no means do I intend to "Juggle" JVMs and whatnot, partly due to the reason mentioned before. Regarding complexity, I agree and would consider what was said, only from my experience I tend to pollute my work environment with SDKs and runtimes I tried and discarded, which would occasionally leave leftovers which cause issues throught the session. What I really want is a set of well defined, non virtualized sessions from which I can choose at my leisure and be mostly (to a reasonable extent) safe from affecting each session from the other. And what I'm really asking is if and how can this be done using user accounts.

  Read the article

• Adjusting the rate of movement of different objects on the same timer

  - by theUg

  I have a series of objects moving along the straight lines. I want to implement slight changes of velocity of each of the object. Constraint is existing model of animation. I am new to this, and not sure if it is the best way to accommodate varying speeds, but what do I know? It is a Java application that repaints the panel every time the timer expires. Timer is set via swing.Timer object that is set by timer delay constant. Every time the game is stepped objects’ coordinates advanced by an increment constant. Most of the objects are of the same class. Is there fairly easy way to refactor existing system to allow changing velocity for an individual object? Is there some obvious common solution I am not aware about? Idea I am having right now is to set timer delay fairly small, and only move objects every so many cycles of animation so that the apparent speed can be adjusted by varying how often they get moved. But that seems fairly involved, and I do not think it is the most elegant solution in terms of performance what with repainting the whole frame every 3-5 milliseconds. Can it be done by advancing the objects so many (varying) times during the certain interval (let’s say 35ms for something like 28fps), and use repaint() method to redraw just individual object? Do I need to mess with pausing animation for smoothness at higher redraw rates? Is it common practise to check for collision at larger step interval, but draw animation a lot more frequently?

  Read the article

• Can higher-order functions in FP be interpreted as some kind of dependency injection?

  - by Giorgio

  According to this article, in object-oriented programming / design dependency injection involves a dependent consumer, a declaration of a component's dependencies, defined as interface contracts, an injector that creates instances of classes that implement a given dependency interface on request. Let us now consider a higher-order function in a functional programming language, e.g. the Haskell function filter :: (a -> Bool) -> [a] -> [a] from Data.List. This function transforms a list into another list and, in order to perform its job, it uses (consumes) an external predicate function that must be provided by its caller, e.g. the expression filter (\x -> (mod x 2) == 0) [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] selects all even numbers from the input list. But isn't this construction very similar to the pattern illustrated above, where the filter function is the dependent consumer, the signature (a -> Bool) of the function argument is the interface contract, the expression that uses the higher-order is the injector that, in this particular case, injects the implementation (\x -> (mod x 2) == 0) of the contract. More in general, can one relate higher-order functions and their usage pattern in functional programming to the dependency injection pattern in object-oriented languages? Or in the inverse direction, can dependency injection be compared to using some kind of higher-order function?

  Read the article

• Kubuntu 11.10 very slow during file I/O

  - by dko

  After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

  Read the article

• Self-serv advertising service

  - by Mystere Man

  I am seeking a self-serv advertising service for my websites, but I have a few restrictions that seem to make what i'm looking for hard to find. Specifically, I want to place "advertise here" links on my pages and allow end-users to purchase advertising on that site, page, and location. These ads will not be part of a national network. Supports multi-tenancy - That is, I have a number of domains using the same "web application" but with customized content per domain. When a customer wants to advertise on a given domain, then the ads will only appear on that domain and on that page of the domain (even though the page name may be the same across multiple domains). Supports fixed ad prices, not just CPC. I need monthly and quarterly pricing regardless of performance. Integrates with OpenX and other ad networks, so that if there is no self-serv on a given zone, it will use national advertising or direct advertising. Shiny Ads has much of this, but i'm looking for alternatives, as their prices are a bit crazy (20%) and can only do PayPal.

  Read the article

• How important is Domain knowledge vs. Technical knowledge?

  - by Mayank

  I am working on a Trading and Risk Management application and although from a C# background, I have been asked to work on SSIS packages. Now I can live with that. The pain point is that there is too much emphasis on business understanding. Trading (Energy Trading to be exact) is a HUGE area and understanding every little bit of it is overwhelming. But for the past two months I have been working on understanding the business terms - Mark To Market, Risk Metrics, Positions, PnL, Greeks, Instruments, Book Structure... every little detail (you get the point). Now IMHO, this is the job of a BA. Sure it is very important for developers to understand the business but where do you draw the line? When I talked to my manager about this, he almost mocked me by saying that anybody can learn a technology in a week. It's the business that's harder. My long term aspiration is to remain on the technical side, probably become an architect (if possible). If I wanted to focus so much on business I would have pursued an MBA! I want to know if I am wrong or too naive in understanding the business importance or is my frustration justified?

  Read the article

• Compressing/compacting messages over websocket on Node.js

  - by icelava

  We have a websocket implementation (Node.js/Sock.js) that exchanges data as JSON strings. As our use cases grow, so have the size of the data transmitted across the wire. The websocket protocol does not natively offer any compression feature, so in order to reduce the size of our messages we'd have to manually do something about the serialisation. There appear to be a variety of LZW implementations in Javascript, some which confuses me on their compatibility for in-browser use only versus transmission across the wire due to my lack of understanding on low-level encodings. More importantly, all of them seem to take a noticeable performance drag when Javascript is the engine doing the compression/decompression work, which is not desirable for mobile devices. Looking instead other forms of compact serialisation, MessagePack does not appear to have any active support in Javascript itself; BSON does not have any Javascript implementation; and an alternative BISON project that I tested does not deserialise everything back to their original values (large numbers), and it does not look like any further development will happen either. What are some other options others have explored for Node.js?

  Read the article

• c# vocabulary

  - by foxjazz

  I have probably seen and used the word Encapsulation 4 times in my 20 years of programming.I now know what it is again, after an interview for a c# job. Even though I have used the public, private, and protected key words in classes for as long as c# was invented. I can sill remember coming across the string.IndexOf function and thinking, why didn't they call it IndexAt.Now with all the new items like Lambda and Rx, Linq, map and pmap etc, etc. I think the more choices there is to do 1 or 2 things 10 or 15 differing ways, the more programmers think to stay with what works and try and leverage the new stuff only when it really becomes beneficial.For many, the new stuff is harder to read, because programmers aren't use to seeing declarative notation.I mean I have probably used yield break, twice in my project where it may have been possible to use it many more times. Or the using statement ( not the declaration of namespace references) but inline using. I never really saw a big advantage to this, other than confusion. It is another form of local encapsulation (oh there 5 times used in my programming career) but who's counting?  THE COMPUTERS ARE COUNTING!In business logic most programming is about displaying lists, selecting items in a list, and sending those choices to some other system or database to keep track of those selections. What makes this difficult is how these items relate to one, each other, and two externally listed items.Well I probably need to go back to school and learn c# certification so I can say I am an expert in c#. Apparently using all aspects of c# (even unsafe code) in my programming life, doesn't make me certified, just certifiable.This is a good time to sign off:Fox-jazzy

  Read the article

• Hurry! See the uncensored OOW videos before they get edited!

  - by rickramsey

  source Uploaded so far: Which Oracle Solaris 11 Technologies Have Sysadmins Been Using Most? Director's Cut - Uncensored - Markus Flierl, VP Solaris Core Engineering, describes how Oracle Solaris 11 customers are taking advantage of the Image Packaging System and the snapshot capability of ZFS to run more frequent updates of not only the OS, but also the applications (agile development, anyone?), and how they're using the network virtualization capabilities in Oracle Solaris 11 to isolate applications and manage workloads on the cloud. Watch How Hybrid Columnar Compression Saves Storage Space Director's Cut - Uncensored - Art Licht shows how hyprid columnar compression (HCC) compresses data 30x without slowing down other queries that the database is performing. First he shows what happens when he runs database queries without HCC, then he shows what happens when he runs the queries with HCC. Security Capabilities and Design in Oracle Solaris 11 Director's Cut - Uncensored - Compliance reporting. Extended policy. Immutable zones. Three of the best minds in Oracle Solaris security explain what they are, what customers are doing with them, and how they were engineered. Filmed at Oracle Open World 2012. Why DTrace and Ksplice Have Made Oracle Linux 6 Popular with Sysadmins Use the DTrace scripts you wrote for Oracle Solaris on Oracle Linux without modification. Wim Coekaerts, VP of Engineering for Oracle Linux, explains how this capability of DTrace, the zero downtime updates enabled by KSplice, and other performance and stability enhancements have made Oracle Linux 6 popular with sysadmins. Why Solaris 11 Is Being Adopted Faster Than Solaris 10 Sneak Preview - Uncut Version - Lynn Rohrer, Director of Oracle Solaris Product Management explains why customers are adopting Oracle Solaris 11 at a faster rate than Oracle Solaris 10, and proves why you should never challenge a Montana woman to a test of strength. What Forsythe Corp Is Helping Its Customers Do With Oracle Solaris 11 Director's Cut - Unedited - Lee Diamante, Solutions Architect for Forsythe Corp, an Oracle Solaris Partner, explains why Forsythe has been recommending Oracle Solaris to its customers, and what those customers have been doing with it. Lots more to come ... - Rick Website Newsletter Facebook Twitter

  Read the article

• A few tips on deploying Secure Enterprise Search with PeopleSoft

  - by Matthew Haavisto

  Oracle's Secure Enterprise Search is part of PeopleSoft now.  It is provided as part of the Peopltools platform as an appliance, and is used with applications starting with release 9.2.  Secure Enterprise Search is a rich and powerful search product that can enhance search and navigation in PeopleSoft applications.  It also provides useful features like facets and filtering that are common in consumer search engines.Several questions have arisen about the deployment of SES and how to administer it and insure optimum performance.  People have also asked about what versions are supported on various platforms.  To address the most common of these questions, we are posting this list of tips.Platform SupportSES 11.1.2.2 does not support some of the platforms supported by PeopleTools, such as Windows 2012 and AIX 7.1. However, PeopleSoft and SES can use different operating system platforms when SES is deployed on a separate machine.SES 11.2.2.2 will have the required platform support for PT 8.53 in the future. We are planning to certify PT 8.53 once the testing is complete in 8.54 development and all platform support is released for 11.2.2.2.ArchitectureWe recommend running SES on a separate machine (from your apps) for two reasons:1.    SES bundles specific WebLogic, Java, and Oracle DB versions and might need different OS patches at a minimum than PeopleSoft. By having SES run on a different machine, these pre-requisites can be managed better through their lifecycle independenly for PeopleSoft and SES.2.    SES is resource intensive - it runs it's own WebLogic and Oracle database. By having SES run on its own machine, sufficient resources can be allocated to SES and free the PeopleSoft servers from impacts of SES load patterns.We will be providing a comprehensive red paper covering PeopleSoft/SES administration in the near future, but until that is published, we'll post tips on this blog.

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• SQL Saturday #220 Atlanta May 2013!

  - by Most Valuable Yak (Rob Volk)

  If you love SQL Server training and are near the Atlanta area, or just love us so much you're willing to travel here, please come join us for: SQL SATURDAY #220! The main event is Saturday, May 18.  The event is free, with a $10.00 lunch fee.  The main page has more details here: http://www.sqlsaturday.com/220/eventhome.aspx We are also offering pre-conference sessions on Friday, May 17, by 5 world-renowned presenters: Denny Cherry: SQL Server Security Register! Site Twitter Adam Machanic: Surfing the Multicore Wave: Processors, Parallelism, and Performance Register! Site Twitter Stacia Misner: Languages of BI Register! Site Twitter Bill Pearson: Practical Self-Service BI with PowerPivot for Excel Register! Site Twitter Eddie Wuerch: The DBA Skills Upgrade Toolkit Register! Site Twitter         We have an early bird registration price of $119 until noon EST Friday, March 22.  After that the price goes to $149, a STEAL when you compare it to the PASS Summit price. :) Please click on the links to register and for more information.  You can also follow the hash tag #SQLSatATL on Twitter for more news about this event. Can't wait to see you all there!

  Read the article

• Product Support News for Oracle Solaris, Systems, and Storage

  - by user12244613

  Hi System Support Customers, April Newsletter is now available The April, 2012 Newsletter for Oracle Solaris, Systems, and Storage is now available via document 1363390.1 *Requires a My Oracle Support account to access. Please take a few minutes to read the newsletter. The newsletter is the primary method of communication about what we in support would like you to be aware of. If you are not receiving the newsletter, it could be due to: (a) Your Oracle profile does not have the allow Oracle Communication selected (on oracle.com Sign In, or if logged in select "Account" and under your Job Role, check you have selected this box : [ ] Yes, send me e-mails in Oracle Products.... (b) you have not logged a service request during the last 12 months. Oracle is working to improve the distribution process and changes are coming and once they are ready I will write more about that. But today if you don't automatically receive the newsletter all you can do is save it as a favorite within My Oracle Support and come back on the 2nd of each month to check out the changes. This month I am really interested to find out from you is the Newsletter providing you the type of items that you are interested in. To gather some data on that, I have a small 2minute survey running on the newsletter or you can access it [ here ] Finally, if you think I am missing a topic in the Newsletter, let me know by taking the survey or suggesting a topic via this blog. Get Proactive Don't forget about being Proactive. The latest updates for Systems and Solaris pages in the Get Proactive area are now available. Check out document 432.1 and learn what proactive features are available for Systems and Solaris.

  Read the article

• Javascript Isometric draw optimization

  - by hustlerinc

  I'm having trouble with isometric tiles drawing. At the moment I got an array with the tiles i want to draw. And it all works fine until i increase the size of the array. Since I draw ALL tiles on the map it really affects the game performance (obviously) :D. My problem is I'm no genius when it comes to javascript and I haven't managed to just draw what is in viewport. Should be fairly simple for an expert though because its fixed sizes etc. Canvas is 960x480 pixels, each tile 64x32. This gives 16 tiles on first row, 15 on the next etc. for a total of 16 rows. Tile 0,0 is in the top-right corner. And draws X up to down and Y right to left. Going through the tiles on the first row from left to right as +X -Y. Here is the relevant part of my drawMap() function drawMap(){ var tileW = 64; // Tile Width var tileH = 32; // Tile Height var mapX = 960-32; var mapY = -16; for(i=0;i<map.length;i++){ for(j=0;j<map[i].length;j++){ var drawTile = map[i][j]; var drawObj = objectMap[i][j]; var xpos = (i-j)*tileH + mapX; var ypos = (i+j)*tileH/2 + mapY; // Place the tiles isometric. ctx.drawImage(tileImg[drawTile],xpos,ypos); if(drawObj){ ctx.drawImage(objectImg[drawObj-1],xpos,ypos-(objectImg[drawObj- 1])); } } } } Could anyone please help me how to translate this to just draw the relevant tiles? It would be deeply appreciated.

  Read the article

• 9 Gigapixel Photo Captures 84 Million Stars

  - by Jason Fitzpatrick

  The European Southern Observatory has released an absolutely enormous picture of the center of the Milky Way captured by their VISTA telescope–the image is 9 gigapixels and captures over 84 million stars. From the press release: The large mirror, wide field of view and very sensitive infrared detectors of ESO’s 4.1-metre Visible and Infrared Survey Telescope for Astronomy (VISTA) make it by far the best tool for this job. The team of astronomers is using data from the VISTA Variables in the Via Lactea programme (VVV), one of six public surveys carried out with VISTA. The data have been used to create a monumental 108 200 by 81 500 pixel colour image containing nearly nine billion pixels. This is one of the biggest astronomical images ever produced. The team has now used these data to compile the largest catalogue of the central concentration of stars in the Milky Way ever created. Want to check out all 9 billion glorious pixels in their uncompressed state? Be prepared to wait a bit, the uncompressed image is available for download but it weighs in at a massive 24.6GB. 84 Million Stars and Counting [via Wired] How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

• I need some career/education advice regarding computer science [on hold]

  - by user2521987

  So I'm a senior mathematics major this fall and I have only taken three CS classes (Java I, Java II, and C++). This summer, I am participating in a mathematics REU (Research Experience for Undergraduates), and I program in C++ about 8 hours a day...and I find that I absolutely love it. I love using programming to solve math problems in my research. I think I want to pursue a career in programming. I have a few options Stay at my university an extra 1-1.5 years (beyond the 4) and do a double major in Math/CS. This will put me in up to around 7-10k in debt (currently I have no debt and am scheduled to graduate debt free). Then apply to a masters in CS. Apply directly to a masters in CS from a math undergraduate degree. I don't like this idea because I likely won't get into a good program or funded with such little background. Go to graduate school, funded, in applied mathematics and try to further my knowledge in computer science while there. Then apply to a masters in CS. I'm not sure if 1 or 3 would be better. My end goal would be to go to a top 20-30 CS graduate program and to get a cool, good job. What would you recommend?

  Read the article

• How do I throttle a command in a terminal window?

  - by To Do

  I needed to run convert with a lot of images at the same time. The command took quite a while but this doesn't bother me. The issue is that this command rendered my computer unusable while the command was running (for about 15 minutes). So is it possible to throttle the command by limiting resources (processor and memory) to the command, directly from the command line? This can only work if I add something to the same line before pressing Enter because once I start the process the computer slows so much that it is impossible for example to switch to "System monitor" and reduce priority. Edit: top and iotop results I managed to run top and sudo iotop >iotop.txt while doing one of these convert operations. (The iotop.txt file produced is difficult to read) Results of top: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14275 username 20 0 4043m 3.0g 1448 D 7.0 80.4 0:16.45 convert Results of iotop: [?1049h[1;24r(B[m[4l[?7h[?1h=[39;49m[?25l[39;49m(B[m[H[2JTotal DISK READ: 1269.04 K/s | Total DISK WRITE:[59G0.00 B/s (B[0;7m TID PRIO USER DISK READ DISK WRITE SWAPIN(B[0;1;7m IO(B[0;7m COMMAND [3;2H(B[m2516 be/4 username 350.08 K/s 0.00 B/s 0.00 % 0.00 % zeitgeist-datahub 7394 be/4 username 568.88 K/s 0.00 B/s 77.41 % 0.00 % --rendere~.530483991[5;1H14275 idle username 350.08 K/s 0.00 B/s 37.49 % 0.00 % convert S~f test.pdf[6;2H2048 be/4 root[6;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % [kworker/3:2] [5G1 be/4 root[7;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % init Furthermore, even after the process ends, the computer does not return to the previous performance. I found a way around this by running sudo swapoff -a followed by sudo swapon -a

  Read the article

• Naming conventions: camelCase versus underscore_case ? what are your thoughts about it?

  - by poelinca

  I've been using underscore_case for about 2 years and I recently switched to camelCase because of the new job (been using the later one for about 2 months and I still think underscore_case is better suited for large projects where there are alot of programmers involved, mainly because the code is easyer to read). Now everybody at work uses camelCase because (so they say) the code looks more elegant . What are you're thoughts about camelCase or underscore_case p.s. please excuse my bad english Edit Some update first: platform used is PHP (but I'm not expecting strict PHP platform related answers , anybody can share their thoughts on which would be the best to use , that's why I came here in the first place) I use camelCase just as everibody else in the team (just as most of you recomend) we use Zend Framework which also recommends camelCase Some examples (related to PHP) : Codeigniter framework recommends underscore_case , and honestly the code is easier to read . ZF recomends camelCase and I'm not the only one who thinks ZF code is a tad harder to follow through. So my question would be rephrased: Let's take a case where you have the platform Foo which doesn't recommend any naming conventions and it's the team leader's choice to pick one. You are that team leader, why would you pick camelCase or why underscore_case? p.s. thanks everybody for the prompt answers so far

  Read the article

• Designing and refactoring of payment logic

  - by jokklan

  Im currently working on an application that helps users to coordinate dinner clubs and all related accounting. (A dinner club is where people in a group, take turns to cook for the rest and then you pay a small amount to participate. This is pretty normal in dorms and colleges where im from). However there is some different models that all have a price and the accounting aspect is therefore a little spread. We both have DinnerClub, ShoppingItem and are about to implement the third Payment when users pay their debts (or get refunded for expenses). Each of these have a "price" attribute and a users expense (that he or she needs refunded) is calculated by the total of these "prices" minus what other users have bought and he or she have used/participated in. My question is then if someone have some hints to refactor this bring all this behavior together in one place? For now have i thought about a Transaction class that are responsible for this behaviour, but I'm a little worried about the performance impact on having to query for another polymorphic record each time i want to show the price on dinner clubs and shopping items (i have a standard index page with a list for both so it's a lot of extra records being queried)...

  Read the article

• Storing User-uploaded Images

  - by Nyxynyx

  What is the usual practice for handling user uploaded photos and storing them on the database and server? For a user profile image: After receiving the image file from user, rename file to <image_id>_<username> Move image to /images/userprofile Add img filename to a table users containing their profile details like first_name, last_name, age, gender, birthday For a image for a review done by user: After receiving the image file from user, rename file to <image_id>_<review_id> Move image to /images/reviews Add img filename to a table reviews containing their profile details like review_id, review_content, user_id, score. Question 1: How should I go about storing the image filenames if the user can upload multiple photos for a particular review? Serialize? Question 2: Or have another table review_images with columns review_id, image_id, image_filename just for tracking images? Will doing a JOIN when retriving the image_filename from this table slow down performance noticeably? Question 3: Should all the images be stored in a single folder? Will there be a problem when we have 100K photos in the same folder? Is there a more efficient way to go about doing this?

  Read the article

• I'm applying for a position at a startup. To whom should I address my cover letter?

  - by sapphiremirage

  One of the co-founders answered questions about the company when the job was posted, but I feel like I shouldn't assume that he's the one who is in charge of hiring. Since it's relatively new and has a lot of name overlap with other things already on the web, it's hard to find any information about the company online, much less the name of their hiring manager. I'm not even certain that they do have a hiring manager, since I seem to remember that they are just an 8 person team. I've heard that "To whom it may concern" is tacky, and normally I would say something along the lines of "Dear Head of Human Resources", but that clearly doesn't work in this case. Any idea what my salutation should be? Later Edits: Final Version: To Joe Programmer and/or the AwesomeStartup.com hiring team, (+ a few words in first paragraph explaining why I am addressing Joe Programmer) I've already sent the email, so nothing you say here will save me. However, feel free to comment on my decision if you think your words be useful to future generations. Old Version (left here because some people responded to it): To the hiring manager for internships at Awesomestartup.com, Additionally, because so many people made comments about the content of my letter: I did spent several hours writing the cover letter itself and making sure that it was awesome. After spending such a long time working on the important part, I asked this question because I wanted to make sure that it wouldn't get passed over by some human who was having a bad day and decided that my salutation was inappropriate. Not likely when the most likely reader of that email is a programmer type, I know, but I figured that it wouldn't hurt not to be sloppy.

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >