Search Results

Search found 21327 results on 854 pages for 'display resolution'.

Page 545/854 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • ffserver-2.2 - streaming an ASF video as Webm output with ffserver on Debian 7.5

    - by Emmanuel Brunet
    I'm trying to stream an IP webcam ASF live stream to a ffserver to output a webm video format. The server starts successfully but the ffserver commands used to feed the ffserver fails and generates a core dump. Input stream $ ffprobe http://account:password@webcam/videostream.asf Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, 1 channels, s16p, 32 kb/s ffserver configuration my ffserver configuration is : Port 8091 RTSPPort 554 BindAddress 192.168.1.62 MaxHTTPConnections 1000 MaxClients 100 MaxBandwidth 1000 CustomLog - <Feed webcam.ffm> File /tmp/webcam.ffm FileMaxSize 500M ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Feed> <Stream webcam.webm> # Output stream URL definition Feed webcam.ffm # Feed from which to receive video Format webm # Audio settings AudioCodec vorbis AudioBitRate 64 # Audio bitrate # Video settings VideoCodec libvpx VideoSize 640x480 # Video resolution VideoFrameRate 25 # Video FPS AVOptionVideo flags +global_header # Parameters passed to encoder # (same as ffmpeg command-line parameters) AVOptionVideo cpu-used 0 AVOptionVideo qmin 10 AVOptionVideo qmax 42 AVOptionVideo quality good AVOptionAudio flags +global_header PreRoll 15 StartSendOnKey # VideoBitRate 32 # Video bitrate </Stream> <Stream status.html> Format status # Only allow local people to get the status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream> ffmpeg feed I run the following command that fails $ ffmpeg -i http://account:password@webcam/videostream.asf http://ffserver_ip:port/webcam.ffm http://192.168.1.62:8091/webcam.ffm Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x36a80c0] deprecated pixel format used, make sure you did set range correctly Segmentation fault I tryed $ ffmpeg -i http://account:password@webcam/videostream.asf -pix_fmt yuv420p http://ffserver_ip:port/webcam.ffm But it raises the same error. Thanks for your help Edit For an easy testing (I thought), I tried to publish the whole ASF stream as is, meaning connecting the ASF webcam output stream to the ffserver that outputs ASF format too. And thus with mirrored encoding so I changed the ffserver configuration to ... <Stream webcam.asf> Feed webcam.ffm Format asf VideoFrameRate 25 VideoSize 640X480 VideoBitRate 256 VideoBufferSize 1000 VideoGopSize 30 AudioBitRate 32 StartSendOnKey </Stream> ... And the output is now : Input #0, asf, from 'http://admin:alpha1237@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 1k tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x3d620c0] deprecated pixel format used, make sure you did set range correctly Output #0, ffm, to 'http://192.168.1.62:8091/webcam.ffm': Metadata: creation_time : now encoder : Lavf55.40.100 Stream #0:0: Audio: wmav2, 22050 Hz, mono, fltp, 32 kb/s Metadata: encoder : Lavc55.64.100 wmav2 Stream #0:1: Video: msmpeg4v3 (msmpeg4), yuv420p, 640x480, q=2-31, 256 kb/s, 1k fps, 1000k tbn, 1k tbc Metadata: Stream mapping: Stream #0:1 -> #0:0 (adpcm_ima_wav -> wmav2) Stream #0:0 -> #0:1 (mjpeg -> msmpeg4) Press [q] to stop, [?] for help Segmentation fault I can't even forward the stream. Thanks for your help again.

    Read the article

  • Puppet gives SSL error because master is not running?

    - by Daniel Huger
    I started with two clean machines this time. My master is running 12.04 Version: 2.7.11-1ubuntu2 Depends: ruby1.8, puppetmaster-common (= 2.7.11-1ubuntu2) My client is 10.04 Version: 2.6.3-0ubuntu1~lucid1 Depends: puppet-common (= 2.6.3-0ubuntu1~lucid1), ruby1.8 To setup Puppet tutorial: http://shapeshed.com/setting-up-puppet-on-ubuntu-10-04/ To connect master and client: http://shapeshed.com/connecting-clients-to-a-puppet-master/ The first time I tried to connect master to client failed with SSL_connect error. So I did rm -rf /etc/puppet/ssl/ to remove all the keys inside ssl folders. It looked like it work.... BUT client# puppet agent --server puppet --waitforce 60 --test /usr/lib/ruby/1.8/facter/util/resolution.rb:46: warning: Insecure world writable dir /etc/condor in PATH, mode 040777 /usr/lib/ruby/1.8/puppet/defaults.rb:67: warning: Insecure world writable dir /etc/condor in PATH, mode 040777 info: Creating a new SSL key for giab10 warning: peer certificate won't be verified in this SSL session info: Caching certificate for ca warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session info: Creating a new SSL certificate request for mybox123 info: Certificate Request fingerprint (md5): XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session warning: peer certificate won't be verified in this SSL session info: Caching certificate for mybox123 err: Could not retrieve catalog from remote server: SSL_connect returned=1 errno=0 state=SSLv3 read server certificate B: certificate verify failed warning: Not using cache on failed catalog It cached but then it couldn't retrieve it. Let me stop here.... worrying I would mess something up. But let's check master's status. * master is not running WoW.... ??? master# service puppetmaster start * Starting puppet master [OK] master# service puppetmaster status * master is not running I think time is sync. Well, we are behind a firewall so the port to sync time is disbaled. I checked with date and they seem okay. What about master not running? Is that the cause? Any help is appreciated. Thanks! /var/lib/puppet/log/masterhttp.log [2012-06-30 00:13:25] INFO WEBrick 1.3.1 [2012-06-30 00:13:25] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:13:25] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 00:19:40] INFO WEBrick 1.3.1 [2012-06-30 00:19:40] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:19:40] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 00:28:58] INFO WEBrick 1.3.1 [2012-06-30 00:28:58] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 00:28:58] WARN TCPServer Error: Address already in use - bind(2) [2012-06-30 15:31:25] INFO WEBrick 1.3.1 [2012-06-30 15:31:25] INFO ruby 1.8.7 (2011-06-30) [x86_64-linux] [2012-06-30 15:31:25] WARN TCPServer Error: Address already in use - bind(2) 1 S puppet 5186 1 0 80 0 - 29410 poll_s 15:44 ? 00:00:00 /usr/bin/ruby1.8 /usr/bin/puppet master --masterport=8140 4 S root 5235 5005 0 80 0 - 2344 pipe_w 15:45 pts/0 00:00:00 grep --color=auto puppet kill -9 5186 puppet master service puppetmaster status * master is not running I always have this error, but I always ignored it. http://pastebin.com/exbpArjv What could it mean? Time sync? Package not installed? Then how could we do puppetca in the first place?

    Read the article

  • Command-line video editing in Linux (cut, join and preview)

    - by sdaau
    I have rather simple editing needs - I need to cut up some videos, maybe insert some PNGs in between them, and join these videos (don't need transitions, effects, etc.). Basically, pitivi would do what I want - except, I use 640x480 30 fps AVI's from a camera, and as soon as I put in over a couple of minutes of that kind of material, pitivi starts freezing on preview, and thus becomes unusable. So, I started looking for a command line tool for Linux; I guess only ffmpeg (command line - Using ffmpeg to cut up video - Super User) and mplayer (Sam - Edit video file with mencoder under linux) are so far candidates, but I cannot find examples of the use I have in mind.   Basically, I'd imagine there's an encoder and player tools (like ffmpeg vs ffplay; or mencoder vs mplayer) - such that, to begin with, the edit sequence could be specified directly on the command line, preferably with frame resolution - a pseudocode would look like: videnctool -compose --file=vid1.avi --start=00:00:30:12 --end=00:01:45:00 --file=vid2.avi --start=00:05:00:00 --end=00:07:12:25 --file=mypicture.png --duration=00:00:02:00 --file=vid3.avi --start=00:02:00:00 --end=00:02:45:10 --output=editedvid.avi ... or, it could have a "playlist" text file, like: vid1.avi 00:00:30:12 00:01:45:00 vid2.avi 00:05:00:00 00:07:12:25 mypicture.png - 00:00:02:00 vid3.avi 00:02:00:00 00:02:45:10 ... so it could be called with videnctool -compose --playlist=playlist.txt --output=editedvid.avi The idea here would be that all of the videos are in the same format - allowing the tool to avoid transcoding, and just do a "raw copy" instead (as in mencoder's copy codec: "-oac copy -ovc copy") - or in lack of that, uncompressed audio/video would be OK (although it would eat a bit of space). In the case of the still image, the tool would use the encoding set by the video files.   The thing is, I can so far see that mencoder and ffmpeg can operate on individual files; e.g. cut a single section from a single file, or join files (mencoder also has Edit Decision Lists (EDL), which can be used to do frame-exact cutting - so you can define multiple cut regions, but it's again attributed to a single file). Which implies I have to work on cutting pieces first from individual files first (each of which would demand own temporary file on disk), and then joining them in a final video file. I would then imagine, that there is a corresponding player tool, which can read the same command line option format / playlist file as the encoding tool - except it will not generate an output file, but instead play the video; e.g. in pseudocode: vidplaytool --playlist=playlist.txt --start=00:01:14 --end=00:03:13 ... and, given there's enough memory, it would generate a low-res video preview in RAM, and play it back in a window, while offering some limited interaction ( like mplayer's keyboard shortcuts for play, pause, rewind, step frame). Of course, I'd imagine the start and end times to refer to the entire playlist, and include any file that may end up in that region in the playlist. Thus, the end result of all this would be: command line operation; no temporary files while doing the editing - and also no temporary files (nor transcoding) when rendering final output... which I myself think would be nice. So, while I think that all of the above may be a bit of a stretch - does there exist anything that would approximate the workflow described above?

    Read the article

  • IP Micro-outages, telephone micro-outages, and CATV micro-outages

    - by Michael Graff
    This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • Why my laptop sends ARP request to itself ?

    - by user58859
    I have just started to learn about protocols. While studying the packets in wireshark, I came across a ARP request sent by my machine to my own IP. Here is the details of the packet : No. Time Source Destination Protocol Info 15 1.463563 IntelCor_aa:aa:aa Broadcast ARP Who has 192.168.1.34? Tell 0.0.0.0 Frame 15: 42 bytes on wire (336 bits), 42 bytes captured (336 bits) Arrival Time: Jan 7, 2011 18:51:43.886089000 India Standard Time Epoch Time: 1294406503.886089000 seconds [Time delta from previous captured frame: 0.123389000 seconds] [Time delta from previous displayed frame: 0.123389000 seconds] [Time since reference or first frame: 1.463563000 seconds] Frame Number: 15 Frame Length: 42 bytes (336 bits) Capture Length: 42 bytes (336 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:arp] [Coloring Rule Name: ARP] [Coloring Rule String: arp] Ethernet II, Src: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa), Dst: Broadcast (ff:ff:ff:ff:ff:ff) Destination: Broadcast (ff:ff:ff:ff:ff:ff) Address: Broadcast (ff:ff:ff:ff:ff:ff) .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast) .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default) Source: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) .... ...0 .... .... .... .... = IG bit: Individual address (unicast) .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default) Type: ARP (0x0806) Address Resolution Protocol (request) Hardware type: Ethernet (0x0001) Protocol type: IP (0x0800) Hardware size: 6 Protocol size: 4 Opcode: request (0x0001) [Is gratuitous: False] Sender MAC address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Sender IP address: 0.0.0.0 (0.0.0.0) Target MAC address: 00:00:00_00:00:00 (00:00:00:00:00:00) Target IP address: 192.168.1.34 (192.168.1.34) Here the sender's mac address is mine(Here I have hiden my mac address). target IP is mine. Why my machine is sending ARP request to itself? I found 3 packets of this type. There was no ARP reply for these packets. Can anybody explain me why it is? (My operating system is windows-7. I am directly connected to a wifi modem. I got these packets as soon as I started my connection.) I want one suggestion also. many places I read that RFC's are enough for study about protocols. I studied the RFC 826 on ARP. I personally feel that is not enough at all. Any suggestion regarding this? Is there more then 1 RFC for a protocol? I want to study about the protocols in very detail. Can anybody guide me for this? Thanks in advance.

    Read the article

  • ASP.Net MVC 2 Auto Complete Textbox With Custom View Model Attribute & EditorTemplate

    - by SeanMcAlinden
    In this post I’m going to show how to create a generic, ajax driven Auto Complete text box using the new MVC 2 Templates and the jQuery UI library. The template will be automatically displayed when a property is decorated with a custom attribute within the view model. The AutoComplete text box in action will look like the following:   The first thing to do is to do is visit my previous blog post to put the custom model metadata provider in place, this is necessary when using custom attributes on the view model. http://weblogs.asp.net/seanmcalinden/archive/2010/06/11/custom-asp-net-mvc-2-modelmetadataprovider-for-using-custom-view-model-attributes.aspx Once this is in place, make sure you visit the jQuery UI and download the latest stable release – in this example I’m using version 1.8.2. You can download it here. Add the jQuery scripts and css theme to your project and add references to them in your master page. Should look something like the following: Site.Master <head runat="server">     <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title>     <link href="../../Content/Site.css" rel="stylesheet" type="text/css" />     <link href="../../css/ui-lightness/jquery-ui-1.8.2.custom.css" rel="stylesheet" type="text/css" />     <script src="../../Scripts/jquery-1.4.2.min.js" type="text/javascript"></script>     <script src="../../Scripts/jquery-ui-1.8.2.custom.min.js" type="text/javascript"></script> </head> Once this is place we can get started. Creating the AutoComplete Custom Attribute The auto complete attribute will derive from the abstract MetadataAttribute created in my previous post. It will look like the following: AutoCompleteAttribute using System.Collections.Generic; using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Attributes {     public class AutoCompleteAttribute : MetadataAttribute     {         public RouteValueDictionary RouteValueDictionary;         public AutoCompleteAttribute(string controller, string action, string parameterName)         {             this.RouteValueDictionary = new RouteValueDictionary();             this.RouteValueDictionary.Add("Controller", controller);             this.RouteValueDictionary.Add("Action", action);             this.RouteValueDictionary.Add(parameterName, string.Empty);         }         public override void Process(ModelMetadata modelMetaData)         {             modelMetaData.AdditionalValues.Add("AutoCompleteUrlData", this.RouteValueDictionary);             modelMetaData.TemplateHint = "AutoComplete";         }     } } As you can see, the constructor takes in strings for the controller, action and parameter name. The parameter name will be used for passing the search text within the auto complete text box. The constructor then creates a new RouteValueDictionary which we will use later to construct the url for getting the auto complete results via ajax. The main interesting method is the method override called Process. With the process method, the route value dictionary is added to the modelMetaData AdditionalValues collection. The TemplateHint is also set to AutoComplete, this means that when the view model is parsed for display, the MVC 2 framework will look for a view user control template called AutoComplete, if it finds one, it uses that template to display the property. The View Model To show you how the attribute will look, this is the view model I have used in my example which can be downloaded at the end of this post. View Model using System.ComponentModel; using Mvc2Templates.Attributes; namespace Mvc2Templates.Models {     public class TemplateDemoViewModel     {         [AutoComplete("Home", "AutoCompleteResult", "searchText")]         [DisplayName("European Country Search")]         public string SearchText { get; set; }     } } As you can see, the auto complete attribute is called with the controller name, action name and the name of the action parameter that the search text will be passed into. The AutoComplete Template Now all of this is in place, it’s time to create the AutoComplete template. Create a ViewUserControl called AutoComplete.ascx at the following location within your application – Views/Shared/EditorTemplates/AutoComplete.ascx Add the following code: AutoComplete.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <%     var propertyName = ViewData.ModelMetadata.PropertyName;     var propertyValue = ViewData.ModelMetadata.Model;     var id = Guid.NewGuid().ToString();     RouteValueDictionary urlData =         (RouteValueDictionary)ViewData.ModelMetadata.AdditionalValues.Where(x => x.Key == "AutoCompleteUrlData").Single().Value;     var url = Mvc2Templates.Views.Shared.Helpers.RouteHelper.GetUrl(this.ViewContext.RequestContext, urlData); %> <input type="text" name="<%= propertyName %>" value="<%= propertyValue %>" id="<%= id %>" class="autoComplete" /> <script type="text/javascript">     $(function () {         $("#<%= id %>").autocomplete({             source: function (request, response) {                 $.ajax({                     url: "<%= url %>" + request.term,                     dataType: "json",                     success: function (data) {                         response(data);                     }                 });             },             minLength: 2         });     }); </script> There is a lot going on in here but when you break it down it’s quite simple. Firstly, the property name and property value are retrieved through the model meta data. These are required to ensure that the text box input has the correct name and data to allow for model binding. If you look at line 14 you can see them being used in the text box input creation. The interesting bit is on line 8 and 9, this is the code to retrieve the route value dictionary we added into the model metada via the custom attribute. Line 11 is used to create the url, in order to do this I created a quick helper class which looks like the code below titled RouteHelper. The last bit of script is the code to initialise the jQuery UI AutoComplete control with the correct url for calling back to our controller action. RouteHelper using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Views.Shared.Helpers {     public static class RouteHelper     {         const string Controller = "Controller";         const string Action = "Action";         const string ReplaceFormatString = "REPLACE{0}";         public static string GetUrl(RequestContext requestContext, RouteValueDictionary routeValueDictionary)         {             RouteValueDictionary urlData = new RouteValueDictionary();             UrlHelper urlHelper = new UrlHelper(requestContext);                          int i = 0;             foreach(var item in routeValueDictionary)             {                 if (item.Value == string.Empty)                 {                     i++;                     urlData.Add(item.Key, string.Format(ReplaceFormatString, i.ToString()));                 }                 else                 {                     urlData.Add(item.Key, item.Value);                 }             }             var url = urlHelper.RouteUrl(urlData);             for (int index = 1; index <= i; index++)             {                 url = url.Replace(string.Format(ReplaceFormatString, index.ToString()), string.Empty);             }             return url;         }     } } See it in action All you need to do to see it in action is pass a view model from your controller with the new AutoComplete attribute attached and call the following within your view: <%= this.Html.EditorForModel() %> NOTE: The jQuery UI auto complete control expects a JSON string returned from your controller action method… as you can’t use the JsonResult to perform GET requests, use a normal action result, convert your data into json and return it as a string via a ContentResult. If you download the solution it will be very clear how to handle the controller and action for this demo. The full source code for this post can be downloaded here. It has been developed using MVC 2 and Visual Studio 2010. As always, I hope this has been interesting/useful. Kind Regards, Sean McAlinden.

    Read the article

  • WPF CheckBox style with the TextWrapping

    - by Shurup
    I need you a TextWrapping in the WPF CheckBox. Please look at this two samples: <CheckBox> <TextBlock TextWrapping="Wrap" Text="_This is a long piece of text attached to a checkbox."/> </CheckBox> <CheckBox> <AccessText TextWrapping="Wrap" Text="_This is a long piece of text attached to a checkbox."/> </CheckBox> If I use a TextBlock in the Content of the CheckBox, the check element (vertical alignment is top) and the text displays properly, but not the accelerator. If I use an AccessText in the Content of the CheckBox, the check element displays wrong (vertical alignment is center). How to change the style of the elements to display this CheckBox correct?

    Read the article

  • unmet dependencies in Ubuntu 12.04

    - by lee.O
    I tried today to install a dvb-card on my Ubuntu 12.04 (Linux blauhai-linux 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ). The installation failed with an error. After that, i tried to install python (it was already installed but i got this error): linux:~$ sudo apt-get install git Reading package lists... Done Building dependency tree Reading state information... Done git is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: python-glade2:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python-support:i386 (= 0.3.4) but it is not installable Depends: python:i386 (= 2.4) but it is not going to be installed Depends: libglade2-0:i386 (= 1:2.5.1) but it is not going to be installed Depends: python-gtk2:i386 (= 2.8.6-8) but it is not going to be installed python-numeric:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python:i386 (= 2.3) but it is not going to be installed Depends: python-central:i386 (= 0.5.7) but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). well, i can read and tried the proposed command, but then i get this: linux:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libopenal1:i386 libsdl-ttf2.0-0:i386 libkrb5-3:i386 libgconf-2-4:i386 libsm-dev libatk1.0-0:i386 libk5crypto3:i386 libstdc++5:i386 libqt4-declarative:i386 libxcomposite1:i386 libice-dev libgail18:i386 libldap-2.4-2:i386 libao-common libv4l-0:i386 liblcms1:i386 libqt4-qt3support:i386 libroken18-heimdal:i386 libunistring0:i386 libcupsimage2:i386 libgphoto2-port0:i386 libidn11:i386 libnss3:i386 libcaca0:i386 gtk2-engines:i386 libgudev-1.0-0:i386 libjpeg-turbo8:i386 libpthread-stubs0 libcairo-gobject2:i386 libavc1394-0:i386 libjpeg8:i386 libotr2 libaio1:i386 libsane:i386 odbcinst1debian2 odbcinst1debian2:i386 libqt4-test:i386 libqt4-script:i386 libqt4-designer:i386 libsdl-mixer1.2:i386 libqt4-network:i386 libqt4-dbus:i386 libcap2:i386 libproxy1:i386 ibus-gtk:i386 libdbus-glib-1-2:i386 libtdb1:i386 libasn1-8-heimdal:i386 libspeex1:i386 libxslt1.1:i386 libgomp1:i386 libcapi20-3:i386 libibus-1.0-0:i386 libcairo2:i386 libgnutls26:i386 libopenal-data odbcinst libgssapi3-heimdal:i386 libcanberra0:i386 libtasn1-3:i386 libfreetype6:i386 x11proto-kb-dev gtk2-engines-murrine:i386 libwavpack1:i386 libqt4-opengl:i386 libsoup-gnome2.4-1:i386 libv4lconvert0:i386 gstreamer0.10-plugins-good:i386 libc6-i386 lib32gcc1 libqt4-xmlpatterns:i386 librsvg2-common:i386 libdatrie1:i386 xtrans-dev libavahi-common-data:i386 libiec61883-0:i386 lib32asound2 libgdk-pixbuf2.0-0:i386 libsdl-image1.2:i386 libp11-kit0:i386 x11proto-input-dev libwind0-heimdal:i386 libpixman-1-0:i386 libsdl1.2debian:i386 libxaw7:i386 libgdbm3:i386 libcups2:i386 libcurl3:i386 libqtcore4:i386 libxinerama1:i386 libesd0:i386 libmikmod2:i386 libkrb5support0:i386 libxft2:i386 libxt-dev libcroco3:i386 libpulse-mainloop-glib0:i386 libice6:i386 libaa1:i386 libieee1284-3:i386 libgcrypt11:i386 libthai0:i386 libao4:i386 libkeyutils1:i386 libxmu6:i386 libcanberra-gtk0:i386 libvorbisfile3:i386 libqt4-sql:i386 esound-common libxpm4:i386 libqt4-svg:i386 libusb-0.1-4:i386 libgail-common:i386 libxrender1:i386 libhcrypto4-heimdal:i386 libraw1394-11:i386 libnspr4:i386 libshout3:i386 libdv4:i386 libhx509-5-heimdal:i386 libxau-dev libqt4-xml:i386 gstreamer0.10-x:i386 libgettextpo0:i386 libxss1:i386 libgd2-xpm:i386 libheimbase1-heimdal:i386 libtiff4:i386 libsdl-net1.2:i386 libjasper1:i386 libgnome-keyring0:i386 libxtst6:i386 gtk2-engines-pixbuf:i386 libqtgui4:i386 libtag1c2a:i386 librsvg2-2:i386 libavahi-client3:i386 libssl0.9.8:i386 libmpg123-0:i386 libmad0:i386 libsasl2-2:i386 xorg-sgml-doctools libgsoap1 gtk2-engines-oxygen:i386 libfontconfig1:i386 xaw3dg:i386 libpango1.0-0:i386 libsm6:i386 libx11-dev libheimntlm0-heimdal:i386 libpulsedsp:i386 lib32stdc++6 libx11-doc libqt4-sql-mysql:i386 libxcb-render0:i386 libodbc1:i386 libexif12:i386 libqt4-scripttools:i386 librtmp0:i386 libgssapi-krb5-2:i386 libxi6:i386 libqtwebkit4:i386 libxcb1-dev libxp6:i386 libaudio2:i386 libxcursor1:i386 libxcb-shm0:i386 libxt6:i386 libxv1:i386 libsasl2-modules:i386 libavahi-common3:i386 libxrandr2:i386 x11proto-core-dev libsqlite3-0:i386 libmng1:i386 libgtk2.0-0:i386 libxdmcp-dev libpthread-stubs0-dev libltdl7:i386 libkrb5-26-heimdal:i386 libssl1.0.0:i386 glib-networking:i386 libgpg-error0:i386 libsoup2.4-1:i386 libgphoto2-2:i386 libtag1-vanilla:i386 libaudiofile1:i386 libglade2-0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal Suggested packages: icedtea-plugin sun-java6-fonts fonts-ipafont-gothic fonts-ipafont-mincho ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ttf-bengali-fonts python3-doc python3-tk python3.2-doc binfmt-support The following packages will be REMOVED: activity-log-manager-control-center aisleriot alacarte apparmor apport apport-gtk apt-xapian-index aptdaemon apturl apturl-common bluez bluez-alsa bluez-alsa:i386 bluez-gstreamer checkbox checkbox-qt command-not-found compiz compiz-gnome compiz-plugins-main-default compizconfig-backend-gconf deja-dup duplicity eog evolution-data-server firefox firefox-globalmenu firefox-gnome-support foomatic-db-compressed-ppds gconf-editor gconf2 gdb gedit gir1.2-mutter-3.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gksu gnome-applets gnome-applets-data gnome-bluetooth gnome-contacts gnome-control-center gnome-media gnome-menus gnome-orca gnome-panel gnome-panel-data gnome-session-fallback gnome-shell gnome-sudoku gnome-terminal gnome-terminal-data gnome-themes-standard gnome-tweak-tool gnome-user-share gstreamer0.10-gconf gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hplip hplip-data ia32-libs ia32-libs-multiarch:i386 ibus ibus-pinyin ibus-table indicator-datetime indicator-power jockey-common jockey-gtk landscape-client-ui-install language-selector-common language-selector-gnome launchpad-integration libcanberra-gtk-module libcanberra-gtk-module:i386 libcanberra-gtk3-module libcompizconfig0 libfolks-eds25 libgksu2-0 libgnome-media-profiles-3.0-0 libgnome2-0 libgnome2-common libgnomevfs2-0 libgnomevfs2-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libmetacity-private0 libmutter0 libpeas-1.0-0 libpurple-bin libpython2.7 libreoffice-gnome librhythmbox-core5 libsyncdaemon-1.0-1 libtotem0 libubuntuoneui-3.0-1 light-themes lsb-release metacity metacity-common mutter-common nautilus-dropbox nautilus-share network-manager-gnome nvidia-common nvidia-settings nvidia-settings-updates onboard oneconf openjdk-7-jdk openjdk-7-jre openprinting-ppds pidgin pidgin-libnotify pidgin-otr printer-driver-foo2zjs printer-driver-ptouch printer-driver-pxljr printer-driver-sag-gdi printer-driver-splix python python-appindicator python-apport python-apt python-apt-common python-aptdaemon python-aptdaemon.gtk3widgets python-aptdaemon.pkcompat python-brlapi python-cairo python-central python-chardet python-configglue python-crypto python-cups python-cupshelpers python-dateutil python-dbus python-debian python-debtagshw python-defer python-dirspec python-egenix-mxdatetime python-egenix-mxtools python-gconf python-gdbm python-gi python-gi-cairo python-glade2:i386 python-gmenu python-gnomekeyring python-gnupginterface python-gobject python-gobject-2 python-gpgme python-gst0.10 python-gtk2 python-httplib2 python-ibus python-imaging python-keyring python-launchpadlib python-lazr.restfulclient python-lazr.uri python-libproxy python-libxml2 python-louis python-mako python-markupsafe python-minimal python-notify python-numeric:i386 python-oauth python-openssl python-packagekit python-pam python-pexpect python-piston-mini-client python-pkg-resources python-problem-report python-protobuf python-pyatspi2 python-pycurl python-pyinotify python-renderpm python-reportlab python-reportlab-accel python-serial python-simplejson python-smbc python-software-properties python-speechd python-twisted-bin python-twisted-core python-twisted-names python-twisted-web python-ubuntu-sso-client python-ubuntuone-client python-ubuntuone-control-panel python-ubuntuone-storageprotocol python-uno python-virtkey python-wadllib python-xapian python-xdg python-xkit python-zeitgeist python-zope.interface python2.7 python2.7-minimal rhythmbox rhythmbox-mozilla rhythmbox-plugin-cdrecorder rhythmbox-plugin-magnatune rhythmbox-plugin-zeitgeist rhythmbox-plugins rhythmbox-ubuntuone screen-resolution-extra sessioninstaller skype software-center software-center-aptdaemon-plugins software-properties-common software-properties-gtk system-config-printer-common system-config-printer-gnome system-config-printer-udev texlive-extra-utils totem totem-mozilla totem-plugins ubuntu-artwork ubuntu-desktop ubuntu-minimal ubuntu-sso-client ubuntu-sso-client-gtk ubuntu-standard ubuntu-system-service ubuntuone-client ubuntuone-client-gnome ubuntuone-control-panel ubuntuone-couch ubuntuone-installer ufw unattended-upgrades unity unity-2d unity-common unity-lens-applications unity-lens-video unity-scope-musicstores unity-scope-video-remote update-manager update-manager-core update-notifier update-notifier-common usb-creator-common usb-creator-gtk virtualbox virtualbox-dkms virtualbox-qt xdiagnose xul-ext-ubufox zeitgeist zeitgeist-core zeitgeist-datahub The following NEW packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! python-minimal python2.7-minimal (due to python-minimal) 0 upgraded, 16 newly installed, 273 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 39.1 MB of archives. After this operation, 324 MB disk space will be freed. You are about to do something potentially harmful. To continue type in the phrase 'Yes, do as I say!' ?] Thats not good, is it?! Should i run this command or should i run another command to fix this problem? Would be great if somebody can help me. :) Thanks in advance. best regards

    Read the article

  • How to disable/enable network, switch to Wifi in Android emulator?

    - by medicdave
    I'm working on a Push Notifications library for Android (http://deaconproject.org/) that needs to take action if network connectivity is interrupted or changed - namely, it needs to re-initiate a server connection or pause its operation until network connectivity is available. This seems to work fine using and Android BroadcastReceiver for "android.net.ConnectivityManager.CONNECTIVITY_ACTION". My problem is in testing the library - I would like to automatically test the library's response to a broken network connection, or a transition from 3G to WiFi, under various configuration conditions. The problem is, I don't want to sit with the emulator and hit F8 all day. Is there a way to programmatically manipulate network connections on Android from within a jUnit test without resorting to toggling Airplane Mode? I've already tried issuing commands to the emulator via the console, manipulating the GSM mode, etc, but while the phone state changes on the display, the Internet connection remains up.

    Read the article

  • How Can I Bypass the X-Frame-Options: SAMEORIGIN HTTP Header?

    - by Daniel Coffman
    I am developing a web page that needs to display, in an iframe, a report served by another company's SharePoint server. They are fine with this. The page we're trying to render in the iframe is giving us X-Frame-Options: SAMEORIGIN which causes the browser (at least IE8) to refuse to render the content in a frame. First, is this something they can control or is it something SharePoint just does by default? If I ask them to turn this off, could they even do it? Second, can I do something to tell the browser to ignore this http header and just render the frame?

    Read the article

  • JqGrid - AfterInsertRow, setCell. programmatically change the contet of the cell

    - by oirfc
    Hello there, I am new to JqGrid, so please bare with me. I am having some problems with styling the cells when I use a showlink formatter. In my configuration I set up the AfterInsertRow and it works fine if I just display simple text: afterInsertRow: function(rowid, aData) { if (aData.Security == `C`) { jQuery('#list').setCell(rowid, 'Doc_Number', '', { color: `red` }); } else { jQuery('#list').setCell(rowid, 'Doc_Number', '', { color: `green` }); } }, ... This code works just fine, but as soon as I add a formatter {'Doc_Number, ..., 'formatter: ’showlink’, formatoptions: {baseLinkUrl: ’url.aspx’} the above code doesn't work because a new element is added to the cell <a href='url.aspx'>cellValue</a> Is it possible to access programmatically the new child element using something like the code above and change the style? <a href='url.aspx' style='color: red;'>cellValue</a> etc. Thanks in advance, oirfc

    Read the article

  • How do I get the C# Winforms Webbrowser control to show PDF content embedded in the html file as bin

    - by uniball
    I am using a Winforms webbrowser control to display HTML content stored in my SQL DB table. However, some of my contents are PDFs which I intend to store as binary data in the SQL DB and feed to the Webbrowser control. I wish to avoid the hassle of storing the binary content in a temporary file on the client machine and then create html container code to reference this temporary PDF file. Is there a way inwhich I can embed the PDF binary content into the html directly and show this html on the webbrowser control directly? I found these previous threads referring to a COM 'hack'. Is there a simpler, easier way? Thanks! http://stackoverflow.com/questions/290035/how-do-i-get-a-c-webbrowser-control-to-show-jpeg-files-raw Thanks, uniball

    Read the article

  • Android page Curl animation

    - by Meymann
    Hi... Two questions: Is there a simple way to do the Curl page flipping animation? A Curl animation is animation of pages flipping, including the page above rolling and the shadows over the lower page. What is the recommended way to do a "gallery" that displays two pages at a time (just like a book)? Is it: Letting the adapter display a linear layout of two images at a time? (it won't let me show a page flipping over the other like a book) Using two pages, placing somehow one near the other, and then when it's time to animate -move the next two pages over? What is the better way that would enable displaying the left page flipping over the right page? Thanks Meymann

    Read the article

  • Using telerik radGrid - how to set the Date format for autogenerated column in edit mode

    - by Mark Breen
    Hello All, Using VS2008, and Telerik radGrid version 2010.1.519.35 I have a about 50 DNN modules using telerik radgrid and I need to display my dates in dd/mm/yy format. It is possible to do this easily in view mode, but when I switch to edit mode, it is more of a struggle. I can write a snippit of code to reformat the displayed date values to dd/mm/yy, but for inserts the user must enter mm/dd/yy. IOW, I need to change the culture of the form to en-GB culture. In my DotnetNuke App, I have made a change to the web.config, but it still assumes en-US format. I am not sure whether I need to set this at web.config level, page level or at the column within the control. I am struggling with this for a month or more and any help would be appriciated, thanks Mark Breen Ireland BMW R80GS 1987

    Read the article

  • Jquery JQGrid trigger reloadGrid

    - by JK
    I'm using a jqgrid to display the results of a search. When the search button is clicked it does this: $("#Search").jqGrid('setGridParam', { url: url }).trigger("reloadGrid"); Where url contains the search params eg: var url ="/search?first=joe&last=smith" The web server is receiving this url and responding appropriately. But on the client side it throws this error in jqgrid.min.js line 21: Syntax error: }); b.fn.jqGrid = function(f) { What can I do to fix this? I'm using jqgrid sucessfully in many other places, but this is the only one where I'm changing the url and reloading.

    Read the article

  • CSS import or multiple CSS files

    - by David H
    I originally wanted to include a .css in my HTML doc that loads multiple other .css files in order to divide up some chunks of code for development purposes. I have created a test page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>The Recipe Site</title> <link rel='stylesheet' href='/css/main.css'> <link rel='stylesheet' href='/css/site_header.css'> <!-- Let google host jQuery for us, maybeb replace with their api --> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script> <script type="text/javascript" src="/js/main.js"></script> </head> <body> <div id="site_container"> <div id="site_header"><?php include_once($r->base_dir . "inc/site_header.inc.php"); ?><!-- Include File, Update on ajax request. --></div> <div id="site_content"> Some main content. </div> <div id="site_footer"><?php include_once($r->base_dir . "inc/site_footer.inc.php"); ?><!-- Include File, Update on ajax request. --></div> </div> </body> </html> File: /css/main.css /* Reset Default Padding & Margin */ * { margin: 0; padding: 0; border: 0; } /* Set Our Float Classes */ .clear { clear: both; } .right { float: right; } .left { float: left; } /* Setup the main body/site container */ body { background: url(/images/wallpaper.png) repeat; color: #000000; text-align: center; font: 62.5%/1.5 "Lucida Grande", "Lucida Sans", Tahoma, Verdana, sans-serif; } site_container { background-color: #FFFFFF; height: 100%; margin-left: auto; margin-right: auto; text-align: left; width: 100%; } /* Some style sheet includes / / @import "/css/site_header.css"; */ /* Default Font Sizes */ h1 { font-size: 2.2em; } h2 { font-size: 2.0em; } h3 { font-size: 1.8em; } h4 { font-size: 1.6em; } h5 { font-size: 1.4em; } p { font-size: 1.2em; } /* Default Form Layout */ input.text { padding: 3px; border: 1px solid #999999; } /* Default Table Reset */ table { border-spacing: 0; border-collapse: collapse; } td{ text-align: left; font-weight: normal; } /* Cause not all browsers know what HTML5 is... */ header { display:block;} footer { display:block;} and now the file: /css/site_header.css: site_header { background-color: #c0c0c0; height: 100px; position: absolute; top: 100px; width: 100%; } Problem: When I use the above code, the site_header div does not have any formatting/background. When I remove the link line from the HTML doc for site_header.css and instead use an @import url("/css/site_header.css"); in my main.css file, the same results -- nothing gets rendered for for the same div. Now when I take the CSS markup from site_header.css and add it to main.css, the div gets rendered fine... So I am wondering if having multiple css files is somehow not working... or maybe having that css markup at the end of my previous css is somehow conflicting, though I cannot find a reason why it would.

    Read the article

  • Maven 3 - duplicate declaration of version

    - by Taylor Leese
    I just upgraded to m2eclipse version 0.10 which includes an embedded Maven 3 and I'm now getting the following error when trying to run a build. I've already set Maven-Installations to my Maven 2 installation, but it had no effect. How do I resolve this? [INFO] Scanning for projects... [ERROR] The build could not read 1 project -> [Help 1] [ERROR] The project com.stuff:sutff-web:0.0.1-SNAPSHOT (C:\development\taylor\stuff\pom.xml) has 1 error [ERROR] 'dependencies.dependency.(groupId:artifactId:type:classifier)' must be unique: com.google.appengine:appengine-api-labs:jar -> duplicate declaration of version ${gae.version} [ERROR] [ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch. [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException

    Read the article

  • Use IIS Application Initialization for keeping ASP.NET Apps alive

    - by Rick Strahl
    I've been working quite a bit with Windows Services in the recent months, and well, it turns out that Windows Services are quite a bear to debug, deploy, update and maintain. The process of getting services set up,  debugged and updated is a major chore that has to be extensively documented and or automated specifically. On most projects when a service is built, people end up scrambling for the right 'process' to use for administration. Web app deployment and maintenance on the other hand are common and well understood today, as we are constantly dealing with Web apps. There's plenty of infrastructure and tooling built into Web Tools like Visual Studio to facilitate the process. By comparison Windows Services or anything self-hosted for that matter seems convoluted.In fact, in a recent blog post I mentioned that on a recent project I'd been using self-hosting for SignalR inside of a Windows service, because the application is in fact a 'service' that also needs to send out lots of messages via SignalR. But the reality is that it could just as well be an IIS application with a service component that runs in the background. Either way you look at it, it's either a Windows Service with a built in Web Server, or an IIS application running a Service application, neither of which follows the standard Service or Web App template.Personally I much prefer Web applications. Running inside of IIS I get all the benefits of the IIS platform including service lifetime management (crash and restart), controlled shutdowns, the whole security infrastructure including easy certificate support, hot-swapping of code and the the ability to publish directly to IIS from within Visual Studio with ease.Because of these benefits we set out to move from the self hosted service into an ASP.NET Web app instead.The Missing Link for ASP.NET as a Service: Auto-LoadingI've had moments in the past where I wanted to run a 'service like' application in ASP.NET because when you think about it, it's so much easier to control a Web application remotely. Services are locked into start/stop operations, but if you host inside of a Web app you can write your own ticket and control it from anywhere. In fact nearly 10 years ago I built a background scheduling application that ran inside of ASP.NET and it worked great and it's still running doing its job today.The tricky part for running an app as a service inside of IIS then and now, is how to get IIS and ASP.NET launched so your 'service' stays alive even after an Application Pool reset. 7 years ago I faked it by using a web monitor (my own West Wind Web Monitor app) I was running anyway to monitor my various web sites for uptime, and having the monitor ping my 'service' every 20 seconds to effectively keep ASP.NET alive or fire it back up after a reload. I used a simple scheduler class that also includes some logic for 'self-reloading'. Hacky for sure, but it worked reliably.Luckily today it's much easier and more integrated to get IIS to launch ASP.NET as soon as an Application Pool is started by using the Application Initialization Module. The Application Initialization Module basically allows you to turn on Preloading on the Application Pool and the Site/IIS App, which essentially fires a request through the IIS pipeline as soon as the Application Pool has been launched. This means that effectively your ASP.NET app becomes active immediately, Application_Start is fired making sure your app stays up and running at all times. All the other features like Application Pool recycling and auto-shutdown after idle time still work, but IIS will then always immediately re-launch the application.Getting started with Application InitializationAs of IIS 8 Application Initialization is part of the IIS feature set. For IIS 7 and 7.5 there's a separate download available via Web Platform Installer. Using IIS 8 Application Initialization is an optional install component in Windows or the Windows Server Role Manager: This is an optional component so make sure you explicitly select it.IIS Configuration for Application InitializationInitialization needs to be applied on the Application Pool as well as the IIS Application level. As of IIS 8 these settings can be made through the IIS Administration console.Start with the Application Pool:Here you need to set both the Start Automatically which is always set, and the StartMode which should be set to AlwaysRunning. Both have to be set - the Start Automatically flag is set true by default and controls the starting of the application pool itself while Always Running flag is required in order to launch the application. Without the latter flag set the site settings have no effect.Now on the Site/Application level you can specify whether the site should pre load: Set the Preload Enabled flag to true.At this point ASP.NET apps should auto-load. This is all that's needed to pre-load the site if all you want is to get your site launched automatically.If you want a little more control over the load process you can add a few more settings to your web.config file that allow you to show a static page while the App is starting up. This can be useful if startup is really slow, so rather than displaying blank screen while the user is fiddling their thumbs you can display a static HTML page instead: <system.webServer> <applicationInitialization remapManagedRequestsTo="Startup.htm" skipManagedModules="true"> <add initializationPage="ping.ashx" /> </applicationInitialization> </system.webServer>This allows you to specify a page to execute in a dry run. IIS basically fakes request and pushes it directly into the IIS pipeline without hitting the network. You specify a page and IIS will fake a request to that page in this case ping.ashx which just returns a simple OK string - ie. a fast pipeline request. This request is run immediately after Application Pool restart, and while this request is running and your app is warming up, IIS can display an alternate static page - Startup.htm above. So instead of showing users an empty loading page when clicking a link on your site you can optionally show some sort of static status page that says, "we'll be right back".  I'm not sure if that's such a brilliant idea since this can be pretty disruptive in some cases. Personally I think I prefer letting people wait, but at least get the response they were supposed to get back rather than a random page. But it's there if you need it.Note that the web.config stuff is optional. If you don't provide it IIS hits the default site link (/) and even if there's no matching request at the end of that request it'll still fire the request through the IIS pipeline. Ideally though you want to make sure that an ASP.NET endpoint is hit either with your default page, or by specify the initializationPage to ensure ASP.NET actually gets hit since it's possible for IIS fire unmanaged requests only for static pages (depending how your pipeline is configured).What about AppDomain Restarts?In addition to full Worker Process recycles at the IIS level, ASP.NET also has to deal with AppDomain shutdowns which can occur for a variety of reasons:Files are updated in the BIN folderWeb Deploy to your siteweb.config is changedHard application crashThese operations don't cause the worker process to restart, but they do cause ASP.NET to unload the current AppDomain and start up a new one. Because the features above only apply to Application Pool restarts, AppDomain restarts could also cause your 'ASP.NET service' to stop processing in the background.In order to keep the app running on AppDomain recycles, you can resort to a simple ping in the Application_End event:protected void Application_End() { var client = new WebClient(); var url = App.AdminConfiguration.MonitorHostUrl + "ping.aspx"; client.DownloadString(url); Trace.WriteLine("Application Shut Down Ping: " + url); }which fires any ASP.NET url to the current site at the very end of the pipeline shutdown which in turn ensures that the site immediately starts back up.Manual Configuration in ApplicationHost.configThe above UI corresponds to the following ApplicationHost.config settings. If you're using IIS 7, there's no UI for these flags so you'll have to manually edit them.When you install the Application Initialization component into IIS it should auto-configure the module into ApplicationHost.config. Unfortunately for me, with Mr. Murphy in his best form for me, the module registration did not occur and I had to manually add it.<globalModules> <add name="ApplicationInitializationModule" image="%windir%\System32\inetsrv\warmup.dll" /> </globalModules>Most likely you won't need ever need to add this, but if things are not working it's worth to check if the module is actually registered.Next you need to configure the ApplicationPool and the Web site. The following are the two relevant entries in ApplicationHost.config.<system.applicationHost> <applicationPools> <add name="West Wind West Wind Web Connection" autoStart="true" startMode="AlwaysRunning" managedRuntimeVersion="v4.0" managedPipelineMode="Integrated"> <processModel identityType="LocalSystem" setProfileEnvironment="true" /> </add> </applicationPools> <sites> <site name="Default Web Site" id="1"> <application path="/MPress.Workflow.WebQueueMessageManager" applicationPool="West Wind West Wind Web Connection" preloadEnabled="true"> <virtualDirectory path="/" physicalPath="C:\Clients\…" /> </application> </site> </sites> </system.applicationHost>On the Application Pool make sure to set the autoStart and startMode flags to true and AlwaysRunning respectively. On the site make sure to set the preloadEnabled flag to true.And that's all you should need. You can still set the web.config settings described above as well.ASP.NET as a Service?In the particular application I'm working on currently, we have a queue manager that runs as standalone service that polls a database queue and picks out jobs and processes them on several threads. The service can spin up any number of threads and keep these threads alive in the background while IIS is running doing its own thing. These threads are newly created threads, so they sit completely outside of the IIS thread pool. In order for this service to work all it needs is a long running reference that keeps it alive for the life time of the application.In this particular app there are two components that run in the background on their own threads: A scheduler that runs various scheduled tasks and handles things like picking up emails to send out outside of IIS's scope and the QueueManager. Here's what this looks like in global.asax:public class Global : System.Web.HttpApplication { private static ApplicationScheduler scheduler; private static ServiceLauncher launcher; protected void Application_Start(object sender, EventArgs e) { // Pings the service and ensures it stays alive scheduler = new ApplicationScheduler() { CheckFrequency = 600000 }; scheduler.Start(); launcher = new ServiceLauncher(); launcher.Start(); // register so shutdown is controlled HostingEnvironment.RegisterObject(launcher); }}By keeping these objects around as static instances that are set only once on startup, they survive the lifetime of the application. The code in these classes is essentially unchanged from the Windows Service code except that I could remove the various overrides required for the Windows Service interface (OnStart,OnStop,OnResume etc.). Otherwise the behavior and operation is very similar.In this application ASP.NET serves two purposes: It acts as the host for SignalR and provides the administration interface which allows remote management of the 'service'. I can start and stop the service remotely by shutting down the ApplicationScheduler very easily. I can also very easily feed stats from the queue out directly via a couple of Web requests or (as we do now) through the SignalR service.Registering a Background Object with ASP.NETNotice also the use of the HostingEnvironment.RegisterObject(). This function registers an object with ASP.NET to let it know that it's a background task that should be notified if the AppDomain shuts down. RegisterObject() requires an interface with a Stop() method that's fired and allows your code to respond to a shutdown request. Here's what the IRegisteredObject::Stop() method looks like on the launcher:public void Stop(bool immediate = false) { LogManager.Current.LogInfo("QueueManager Controller Stopped."); Controller.StopProcessing(); Controller.Dispose(); Thread.Sleep(1500); // give background threads some time HostingEnvironment.UnregisterObject(this); }Implementing IRegisterObject should help with reliability on AppDomain shutdowns. Thanks to Justin Van Patten for pointing this out to me on Twitter.RegisterObject() is not required but I would highly recommend implementing it on whatever object controls your background processing to all clean shutdowns when the AppDomain shuts down.Testing it outI'm still in the testing phase with this particular service to see if there are any side effects. But so far it doesn't look like it. With about 50 lines of code I was able to replace the Windows service startup to Web start up - everything else just worked as is. An honorable mention goes to SignalR 2.0's oWin hosting, because with the new oWin based hosting no code changes at all were required, merely a couple of configuration file settings and an assembly directive needed, to point at the SignalR startup class. Sweet!It also seems like SignalR is noticeably faster running inside of IIS compared to self-host. Startup feels faster because of the preload.Starting and Stopping the 'Service'Because the application is running as a Web Server, it's easy to have a Web interface for starting and stopping the services running inside of the service. For our queue manager the SignalR service and front monitoring app has a play and stop button for toggling the queue.If you want more administrative control and have it work more like a Windows Service you can also stop the application pool explicitly from the command line which would be equivalent to stopping and restarting a service.To start and stop from the command line you can use the IIS appCmd tool. To stop:> %windir%\system32\inetsrv\appcmd stop apppool /apppool.name:"Weblog"and to start> %windir%\system32\inetsrv\appcmd start apppool /apppool.name:"Weblog"Note that when you explicitly force the AppPool to stop running either in the UI (on the ApplicationPools page use Start/Stop) or via command line tools, the application pool will not auto-restart immediately. You have to manually start it back up.What's not to like?There are certainly a lot of benefits to running a background service in IIS, but… ASP.NET applications do have more overhead in terms of memory footprint and startup time is a little slower, but generally for server applications this is not a big deal. If the application is stable the service should fire up and stay running indefinitely. A lot of times this kind of service interface can simply be attached to an existing Web application, or if scalability requires be offloaded to its own Web server.Easier to work withBut the ultimate benefit here is that it's much easier to work with a Web app as opposed to a service. While developing I can simply turn off the auto-launch features and launch the service on demand through IIS simply by hitting a page on the site. If I want to shut down an IISRESET -stop will shut down the service easily enough. I can then attach a debugger anywhere I want and this works like any other ASP.NET application. Yes you end up on a background thread for debugging but Visual Studio handles that just fine and if you stay on a single thread this is no different than debugging any other code.SummaryUsing ASP.NET to run background service operations is probably not a super common scenario, but it probably should be something that is considered carefully when building services. Many applications have service like features and with the auto-start functionality of the Application Initialization module, it's easy to build this functionality into ASP.NET. Especially when combined with the notification features of SignalR it becomes very, very easy to create rich services that can also communicate their status easily to the outside world.Whether it's existing applications that need some background processing for scheduling related tasks, or whether you just create a separate site altogether just to host your service it's easy to do and you can leverage the same tool chain you're already using for other Web projects. If you have lots of service projects it's worth considering… give it some thought…© Rick Strahl, West Wind Technologies, 2005-2013Posted in ASP.NET  SignalR  IIS   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • CodePlex Daily Summary for Wednesday, February 17, 2010

    CodePlex Daily Summary for Wednesday, February 17, 2010New ProjectsAcademic Success Accounting System: The system is intended to use by school teacher to set marks to students and estimate their academic success and possibilities. The client applicat...Access.PowerTools: Access PowerTools is currently a sample MS Access add-in project to try & test features of Add-in Express™ 2009 for Microsoft® Office and .net (ht...AntoonCms: AntoonCms makes it easy to maintain a simple website with it's builtin administration pages. It's developed in C# on target Framework 2.0 The CMS...ASP.NET MVC Mehr Lib: Mehr Lib makes it easier for ASP.NET MVC developers to do develop projects. It's developed in C#. This version currently include Ajax master detail...BCryptTool: Developer tool that calculates BCrypt hash codes for strings. BCrypt is an implementation of the Blowfish cipher and a computationally-expensive ha...Coronasoft Cryostasis scripting engine: A scripting engine that allows you to dynamically load plugins from just about any supported .NET language. Its written in C#. Languages supported ...Critical Point Search: Critical Point Searchcritical points: critical pointsFont Family Name Retrieval: This library helps developer to retrieve the font family name from the TTF, OTF and TTC font files, so that developer can display the font without ...jQuery Form Input Hints Plugin: Automatically display hints on input textboxes in your forms using this jQuery plugin. I wrote this code to be as simple and as easy to use as pos...Kojax: kojax projectKronRetro: KronRetro! Making a Habbo Retro just got easier! Powered by PHP & MySQL you can make a Habbo Retro site fast!MVVM Wrapper Kit: MVVM Wrapper Kit makes it easier for View Model programmers to wrap their business objects and collections while preserving change notification and...ObjectCartographer: ObjectCartographer is an object to object mapper and object factory. It's developed in C#.PE-file Reader Writer API (PERWAPI): PERWAPI is a reader writer module for .NET program executables. It has been used as back-end for progamming language compilers such as Gardens Poi...Pinger: A simple Pinger, pings an address until you press a buttonQPV: 0.1: QPV aka Que pelicula es una aplicacion que consiste crear una base de datos potente de peliculas, criticas e informacion para poder filtrar pelicul...SIMD Detector: This SIMD class helps developers to detect the types of SIMD instruction available on users' processor. It supports Intel and AMD CPUs. It is writt...StackOverflow Test Project: Following Andrew Siemer's StackOverflow Knowledge Exchange Project.WeBlog: A blogging platform built on the MVC framework The project will showcase current technologies such as MVC 2, Silverlight 4 and jQuery 1.4. Data pro...Webmedia: this is my webmedia projectWindows Azure RSS Reader: This is and online RSS reader based on the Windows Azure platformWordEditor. A Word Editor for Windows, and an extended RichTextBox control.: This is a word editor that can be used as a stand alone word processor, or added to an existing project.Домашняя Бухгалтерия: Программа для ведения домашнего бухгалтерского учета финансов. New ReleasesAccess.PowerTools: Access PowerTools Add-In Community Edition v.0.0.1: Access PowerTools Add-In Community Edition v.0.0.1 is a sample MS Access add-in project to try & test Add-in Express™ 2009 for Microsoft® Office an...Active CSS: ActiveCSS-0.1.1: revision for version 0.1ASP.NET: Microsoft Ajax Minifier 4.0: The Microsoft Ajax Minifier enables you to improve the performance of your Ajax applications by reducing the size of your Cascading Style Sheet and...ASP.NET MVC Mehr Lib: V1.0: Mehr Lib V1.0 This version currently include ajax master detail combo facilities.ASP.net Ribbon: Version 1.2: New controls : Expandable gallery Color Picker Multi color File Menu Some JS modifications. Some CSS modifications. Includes some functionna...ASP.NET Web Forms Model-View-Presenter (MVP) Contrib: WebForms MVP Contrib CTP6: This is a release of the WebForms MVP Contrib project for WebForms MVP CTP6. Release includes: WebForms MVP Contrib framework Ninject IoC containerAwesomiumDotNet: AwesomiumDotNet 1.2.1: - Added Awesomium 1.5 features: URL filtering, header rewrite rules, SetOpensExternalLinksInCallingFrame. - Numerous fixes and improvements.BCryptTool: BCryptTool v0.1: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Buzz Dot Net: Buzz Dot Net v.1.10216: Features Parse Google Buzz feed to Objects Partial MVVM Implementation Partial OptimizationsCanvas VSDOC Intellisense: v1.0.0.0a: canvas-vsdoc.js and canvas-utils.js JavaScript intellisense for HTML5 Canvas element.CheckHeader: CheckHeader v0.8.5: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Claymore MVP: Claymore 1.0.2.0: Changelog Added ASP.NET WebForm support via ClaymoreHttpModule class. Added xsd schema for Visual Studio Intellisense within App.config and Web....Dam Gd - URL Shortner: Dam.gd Version 1.1: This is the latest instalment in our URL shortner. It uses The Easy API http://theeasyapi.com to access data that is used for the back-end analyti...D-AMPS: D-AMPS 0.9.1: Initial version.easySMS: easySMS 1.0 Source code: easySMS 1.0 Source codeFont Family Name Retrieval: 1st Release: Version 1.0.0Free Silverlight & WPF Chart Control - Visifire: Visifire Now Supports DataBinding: Hi, Today we are releasing the much awaited DataBinding feature in Visifire 3.0.3 beta 3. Now you can Bind any DataSource at the Series level so t...GenerateTypedBamApi: Version 2.0: Changes in this release: NEW: Export functionality no longer requires Excel to be installed (uses OLE DB vs. Excel Automation; also enables usage i...Gmail Notifier 2: GmailNotifier2 1.2.1: Fixes issues #9652, #9653iTuner - The iTunes Companion: iTuner 1.1.3699: This includes the first pass of the iTuner Librarian including management of dead tracks, duplicates, and empty directories... While I promised a ...jQuery Form Input Hints Plugin: jQuery.InputHints v1.0: jQuery.InputHints v1.0 Includes Standard & minified source Demo HTML file VS2008 SolutionLibWowArmory: LibWowArmory 0.2.3 beta: LibWowArmory 0.2.3 betaThis release of the LibWowArmory source code matches the WoW Armory as of version 3.3.2. Changes since version 0.2.2:Update...Managed Extensibility Framework: MEF Preview 9: We have merged the .net 3.5 and Silverlight 3 into a single zip. The bin folder contains the binaries for .net 3.5 whereas bin\SL contains the bina...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-1.3.3.0-6571.msi: February 16, 2010 * MdxDesigner: Fix for the issue where when an element is clicked, the mouse wheel stops working until the cursor leaves and r...MEFGeneric: MEFGeneric Preview 9: MEFGeneric Preview 9 release.Mesopotamia Experiment: Mesopotamia 1.2.26: Bug Fixes - mud map - progress window - recycle app domains on robotics engine crashes( in command prompt and visual, major work) - fixed rooomba h...Microsoft Solution Framework for Business Intelligence in Media: Release 1.0: This is the public release of the Microsoft Solution Framework for Business Intelligence in Media (Release 1.0).MVVM Wrapper Kit: MVVM Wrapper Beta: A simple test project is included to get you up and running, and wrapping those business objects.nBayes - Bayesian Filtering in C#: nBayes v0.2: nBayes' indexing system is factored in such a way that you can easily replace the index with a custom implementation. This release introduces an ad...NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.5: 3.6.0.5 16-February-2010 - Fix: SqlAzManSid Class. "Equals" matches object signiture instead of IAzManSid signiture. When a real null object is pas...ObjectCartographer: ObjectCartographer Code 1.0: This is the first release and contains code to help with object to object mapping (including mapping from one object to multiple objects), object f...Office Apps: 0.8.6: Bug fix's, added Calendar.OI - Open Internet: OI HTML and .XAP files (OI offline): this is the HTML code and the XAP file. please right-click the app at http://bit.ly/openinternet and select "install openinternet application to th...PE-file Reader Writer API (PERWAPI): PERWAPI-1.1.3: Perwapi version 1.1.3 is the complete distribution package. It contains Binary files, pdb files and xml files for the PERWAPI and SymbolRW compone...Pinger: Pinger 1.0.0.0 Binary: The Latest BinaryRNA Comparative Analysis Software Tools: RNA Comparative Analysis Software Tools 2.0: RNA Comparative Analysis Software Tools Version 2.0 Note: The RNA Comparative Analysis Software Tools are provided as is, without any warranty. No...SAL- Self Artificial Learning: Artificial Learning working proof of concept: This is a working proof of concept. It includes the Dev version (in .zip format) and the consumer version (in .exe format)SharePoint Management PowerShell scripts: SharePoint 2010 PowerShell Scripts: All the SharePoint 2010 PowerShell Scripts The first file is an Excel 2010 file allowing to find quiclky and easily the new cmdlets available wi...SIMD Detector: 1st Release: Version 1.3 Supports MMX/MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4a, SSE5, 3DNow.Terminals: Terminals 1.9 Beta Release: This is a beta release so the new features being added to terminals can be tested properly. The major change in this release is that Terminals has...Text Designer Outline Text Library: 9th minor release: Added the ability to select brush, such as gradient brush or texture brush for the text body. Added CSharp library, TextDesignerCSLibrary. Manage...VivoSocial: VivoSocial 7.0.2: This release has several updated modules. See the Support Forums for more details. Since we update modules very often, we will be changing how we d...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.6.00: changes CKEditor Upgrade to Version 3.2 SVN 5132 File Browser: After File Upload, File will be Auto Selected File Browser: Icons are corrected ...WordEditor. A Word Editor for Windows, and an extended RichTextBox control.: WordEditor Source Code: This contains the latest solution file, with all project files included.Домашняя Бухгалтерия: Alapha Realease: Принимаются ваши предложения по дизайну и функциональности программы.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesASP.NETLiveUpload to FacebookMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSimple SavantNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelSharpyjQuery Library for SharePoint Web ServicesFluent Validation for .NET

    Read the article

  • AddHandler not working?

    - by EdenMachine
    I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

    Read the article

  • android listview set dynamically background color of views

    - by Sephy
    Hi everybody, I know that there have quite a lot of answers to similar questions but I couldn't find any solution to my question, so new topic : I'm creating a listview, with one basic view per row, my try is to change the background color of the view by .setbackgroundcolor, but nothing's doing the trick... I define an array of color at the beginning of my resources and i'm trying to display it, I also tried to put the array in the class, write the color like #00FF00, int, and I wanted to try 0x...... but as my colors are in an array, I can't do 0x+myColorsArray[i] because Eclipse tells me that it's not a proper hex color... I'm getting a bit desperate... thanks for any help

    Read the article

  • Implementing History Support using jQuery for AJAX websites built on asp.net AJAX

    - by anil.kasalanati
    Problem Statement: Most modern day website use AJAX for page navigation and gone are the days of complete HTTP redirection so it is imperative that we support back and forward buttons on the browser so that end users navigation is not broken. In this article we discuss about solutions which are already available and problems with them. Microsoft History Support: Post .Net 3.5 sp1 Microsoft’s Script manager supports history for websites using Update panels. This is achieved by enabling the ENABLE HISTORY property for the script manager and then the event “Page_Browser_Navigate” needs to be handled. So whenever the browser buttons are clicked the event is fired and the application can write code to do the navigation. The following articles provide good tutorials on how to do that http://www.asp.net/aspnet-in-net-35-sp1/videos/introduction-to-aspnet-ajax-history http://www.codeproject.com/KB/aspnet/ajaxhistorymanagement.aspx And Microsoft api internally creates an IFrame and changes the bookmark of the url. Unfortunately this has a bug and it does not work in Ie6 and 7 which are the major browsers but it works in ie8 and Firefox. And Microsoft has apparently fixed this bug in .Net 4.0. Following is the blog http://weblogs.asp.net/joshclose/archive/2008/11/11/asp-net-ajax-addhistorypoint-bug.aspx For solutions which are still running on .net 3.5 sp1 there is no solution which Microsoft offers so there is  are two way to solve this o   Disable the back button. o   Develop custom solution.   Disable back button Even though this might look like a very simple thing to do there are issues around doing this  because there is no event which can be manipulated from the javascript. The browser does not provide an api to do this. So most of the technical solution on internet offer work arounds like doing a history.forward(1) so that even if the user clicks a back button the destination page redirects the user to the original page. This is not a good customer experience and does not work for asp.net website where there are different views in the same page. There are other ways around detecting the window unload events and writing code there. So there are 2 events onbeforeUnload and onUnload and we can write code to show a confirmation message to the user. If we write code in onUnLoad then we can only show a message but it is too late to stop the navigation. And if we write on onBeforeUnLoad we can stop the navigation if the user clicks cancel but this event would be triggered for all AJAX calls and hyperlinks where the href is anything other than #. We can do this but the website has to be checked properly to ensure there are no links where href is not # otherwise the user would see a popup message saying “you are leaving the website”. Believe me after doing a lot of research on the back button disable I found it easier to support it rather than disabling the button. So I am going to discuss a solution which work  using jQuery with some tweaking. Custom Solution JQuery already provides an api to manage the history of a AJAX website - http://plugins.jquery.com/project/history We need to integrate this with Microsoft Page request manager so that both of them work in tandem. The page state is maintained in the cookie so that it can be passed to the server and I used jQuery cookie plug in for that – http://plugins.jquery.com/node/1386/release Firstly when the page loads there is a need to hook up all the events on the page which needs to cause browser history and following is the code to that. jQuery(document).ready(function() {             // Initialize history plugin.             // The callback is called at once by present location.hash.             jQuery.history.init(pageload);               // set onlick event for buttons             jQuery("a[@rel='history']").click(function() {                 //                 var hash = this.page;                 hash = hash.replace(/^.*#/, '');                 isAsyncPostBack = true;                 // moves to a new page.                 // pageload is called at once.                 jQuery.history.load(hash);                 return true;             });         }); The above scripts basically gets all the DOM objects which have the attribute rel=”history” and add the event. In our test page we have the link button  which has the attribute rel set to history. <asp:LinkButton ID="Previous" rel="history" runat="server" onclick="PreviousOnClick">Previous</asp:LinkButton> <asp:LinkButton ID="AsyncPostBack" rel="history" runat="server" onclick="NextOnClick">Next</asp:LinkButton> <asp:LinkButton ID="HistoryLinkButton" runat="server" style="display:none" onclick="HistoryOnClick"></asp:LinkButton>   And you can see that there is an hidden HistoryLinkButton which used to send a sever side postback in case of browser back or previous buttons. And note that we need to use display:none and not visible= false because asp.net AJAX would disallow any post backs if visible=false. And in general the pageload event get executed on the client side when a back or forward is pressed and the function is shown below function pageload(hash) {                   if (hash) {                         if (!isAsyncPostBack) {                           jQuery.cookie("page", hash);                     __doPostBack("HistoryLinkButton", "");                 }                isAsyncPostBack = false;                             } else {                 // start page             jQuery("#load").empty();             }         }   As you can see in case there is an hash in the url we are basically do an asp.net AJAX post back using the following statement __doPostBack("HistoryLinkButton", ""); So whenever the user clicks back or forward the post back happens using the event statement we provide and Previous event code is invoked in the code behind.  We need to have the code to use the pageId present in the url to change the page content. And there is an important thing to note – because the hash is worked out using the pageId’s there is a need to recalculate the hash after every AJAX post back so following code is plugged in function ReWorkHash() {             jQuery("a[@rel='history']").unbind("click");             jQuery("a[@rel='history']").click(function() {                 //                 var hash = jQuery(this).attr("page");                 hash = hash.replace(/^.*#/, '');                 jQuery.cookie("page", hash);                 isAsyncPostBack = true;                                   // moves to a new page.                 // pageload is called at once.                 jQuery.history.load(hash);                 return true;             });        }   This code is executed from the code behind using ScriptManager RegisterClientScriptBlock as shown below –       ScriptManager.RegisterClientScriptBlock(this, typeof(_Default), "Recalculater", "ReWorkHash();", true);   A sample application is available to be downloaded at the following location – http://techconsulting.vpscustomer.com/Source/HistoryTest.zip And a working sample is available at – http://techconsulting.vpscustomer.com/Samples/Default.aspx

    Read the article

  • Show Recent Documents in Sharepoint

    - by frbry
    Hello, I want to display the list of recently added documents to any (or a few) library in a Sharepoint site. Unfortunately, there is no Content Query Web Part in the Web Part list. Also, I can't deploy any custom code. I came up with the idea, to create workflows for each library, which will copy the uploaded document to a "Recent Documents" library. But my client does not want this solution, saying that it will increase the storage usage. He also says that he saw this done in another Sharepoint site and insists on that the whole thing shouldn't be a problem, cause it's a basic Sharepoint function. Perhaps he is right, perhaps he is not. Either way, I'm to solve this. Thank you.

    Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >