Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 548/647 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• HP/IBM alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/IBM? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• Arduino IDE "launch 4j" error

  - by John

  I have a computer running Windows XP. I am trying to run the Arduino IDE 0022. I double-click on arduino.exe, it waits about 30 seconds on the load up title screen, and then it gives me this error: Launch 4j: an error occurred while starting the application My only choice is to click "OK"; the error goes away, and the Arduino IDE closes. If I try to delete the Arduino files (to try overwriting with some different files), I get an error that doesn't allow me to do so: Cannot delete awt.dll: Access denied Make sure the disk is not full or write protected and that the file is not currently in use. The only way to delete the file is by restarting the computer. So something must still be trying to run after that first error. I have noticed in Task Manager that some Java programs are still running: javaw.exe (3 processes) I think this is a problem with Java, but I checked and updated all of my Java software and it is all up to date. I have looked on other forums for this issue and none of them seemed to help. From the forums I have tried: Different Arduino IDE versions Updating Java Opening arduino.exe as Administrator Nothing has worked. Anyone have any suggestions?

  Read the article

• What is the bash syntax to create a new directory in the directory above?

  - by mozerella

  I aim to make a script for mogrify. The mogrify command will resize images in a directory and put the resized images into a directory on the same directory level, with the same name as the work directory, but with a suffix (_a). The new directory will be moved to another collection later on. Something like this, #!/bin/bash mkdir ../n_a for file in *{.JPG|.jpg}; do mogrify -path ../n_a -resize 1200x1200 -quality 96;done I'm guessing ../ denotes the parent dir when working in a child directory, but I need help here. Edit: "n" needs to be replaced with the syntax for the working directory name. Sorry there was a typo as well third script line, should have read n not x Edit2: This script does exactly what I need and it's silent. #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p $DEST mogrify -path $DEST -resize 1200x1200 -quality 96 *.jpg *.JPG thanks to vgoff for the correct PWD syntax and cesareriva http://www.cesareriva.com/archives/722 for showing me the DEST function. Something else: ${PWD##*/}_a is not caring for spaces in the directory name and the script fails. An empty dir is created in the same dir as the images. Found it out now, it needs quotations on the $DEST too, presumably to help mkdir create the dir with a space in the name, and mogrify to write the files to the right place, like this #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p "$DEST" mogrify -path "$DEST" -resize 1200x1200 -quality 96 *.jpg *.JPG

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

  - by Setesh

  Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

  Read the article

• Replicated filesystem and EC2 MySQL

  - by El Yobo

  I'm currently investigating migrating our infrastructure over to run on Amazon's EC2 and am trying to figure out the best way to set up a MySQL service. I'm leaning towards running our own MySQL instances, rather than going with Amazon's RDS, but am still considering the best approach for performance and cost on the instance itself. In order to have persistent data, the MySQL data needs to be on an EBS volume (with some form of striped RAID, e.g. RAID0 or RAID10) to improve persistence. However, EBS IO is limited by the network interface (gigabit, so a theoretical maximum of 128 MB/s), while the ephemeral volumes have no such problem. I did see a suggestion for running two MySQL servers on an instance, with a master running on the ephemeral disk (which we would also RAID) and a slave storing changes to an EBS volume, but this has some additional overhead and complexity (two servers). What I was imagining is using some form of replicated file system such that I could have a filesystem on top of a RAID0 of ephemeral volumes to maximise performance all changes from the above immediately replicated to another RAID1 volume backed by multiple EBS volumes to ensure no data loss The advantages of this would be best possible IO performance for the DB server; no network delay in IO decreased IO on EBS volumes (as all read IO will be done on the ephemeral volumes) so decreased cost good data security, as it's backed onto redundant EBS volumes However, I haven't seen an appropriate system to replicate all changes from one volume to the other; is there a filesystem, or any other approach, which will do this? The distributed file systems, e.g. GlusterFS, DRBD etc seem to focus on replicating disks between servers, can they be set up to do what I'm interested in here? I also haven't seen anything about other's taking this approach. Do I have a solution in need of a problem here (i.e. is performance good enough, so this whole idea is redundant)? Is there some flaw in the plan?

  Read the article

• Deleting old system folders from a drive that is no longer the windows installation drive

  - by grenade

  I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

  Read the article

• How to copy VirtualBox VDI contents to a partition and dual boot the OS from it?

  - by Calmarius

  I'm a Linux user but I keep a compressed Windows XP ISO with me on a pen drive for the case I absolutely need Windows to do something. This works in VirtualBox most of the time. But now I want to play some games, so I would like to run the Windows image natively. My computer don't have CD drive so cannot just burn the ISO and make an install normally. What I trying to do is moving the installed Windows image to a physical NTFS partition on my HDD and set up GRUB to let me dual boot it. I found many tutorials that deal with making VDI to physical drive. But they assume I want to overwrite my entire drive. Moving the raw disk image with dd to the partition resulted in a corrupt partition. I also tried the VMDK trick to use that empty partition and install the Windows on it. Although the text mode phase of the installation finishes without problems, the VM won't work, either crashes and keeps rebooting or just immediately or freezes (depending on how I created the VMDK, with -rawdisk /dev/sda3 or -rawdisk /dev/sda -partition 3).

  Read the article

• Windows Server 2008 R2 Standard to Enterprise Problems

  - by boburob

  A few months ago I setup a Citrix XenApp cluster running on Windows Server 2008 R2 Standard Edition using the temporary 180 day license key. Recently the company bought a Windows Server 2008 R2 Enterprise DataCenter license. This means I need to upgrade the Windows edition from Standard to Enterprise. I attach the disk to the VM and start the upgrade process through XenCenter, it runs through all checks and unpacks all Windows files and seems to create a Windows Setup partition, it then reboots and trys to boot into this partition and I get a blue screen telling me to CHKDSK the hard drive with the following error message: STOP: 0x0000007B As XenApp is already setup and working I really do not want to go down the route of rebuilding this server (as I already had to do this once down to issues with XenApp). The server did have 8GB of RAM assigned to it, I have tried reducing this down to 2GB's as I read this can cause an issue. Also I can boot back into the Windows Server 2008 R2 Standard partition without any problems. UPDATE I have managed to get round the urgency by re-arming the license, giving me another 180 day trial..but would be nice to work out why this is happening!

  Read the article

• What does SQL Server's BACKUPIO wait type mean?

  - by solublefish

  I'm using Sql Server 2008 ("R1"), with some maintenance plans that back up my databases to a network share. Some of my backup jobs show long waits of type "BACKUPIO". Of course it seems like this is an I/O subsystem limitation, but I'm skeptical. Perfmon stats for I/O on the production (source) server are well within normal trends for that server. The destination server shows a sustained 7MB/s write rate, which seems incredibly low, even for a slow disk. The network link is gigabit ethernet and nowhere near saturated. The few docs I've turned up about BACKUPIO indicate that it's not specifically a wait on I/O, surprisingly enough. This MSFT doc says it's abnormal unless you're using a tape drive, which I'm not. But it doesn't say (or I don't understand) exactly what resource is missing. http://www.docstoc.com/docs/24580659/Performance-Tuning-in-SQL-Server-2005 And this piece says it's not related to I/O performance at all. http://www.informit.com/articles/article.aspx?p=686168&seqNum=5 "Note that BACKUPIO and IO_AUDIT_MUTEX are not related to IO performance." Anyway, does anyone know what BACKUPIO actually means and/or what I can do to diagnose or eliminate it?

  Read the article

• can't install anything anymore with apt-get

  - by Aymane Shuichi

  Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

  Read the article

• Why is there an extra HDD under /dev being added in my Linux Kernel?

  - by user1279156

  I have created a Linux kernel and for some reason an extra drive is always added at bootup. My hard drive is listed as /dev/sdb. /dev/sda is created too, and it is 8 MB in size. I can't find anything in the kernel config that is creating this, but if I use a different kernel it is not there. Kernel logs show it as an attached SCSI device, looks just like my hard drive but only 8 MB, and has no partition table. It also doesn't appear to be a physical device. I've tried the kernel on many different models of PCs and it is always there. Does anyone know how to remove it? /dev/disk/by-id gives me: scsi-1AMCC_U21413034D98EB000584 scsi-1AMCC_U21413034D98EB000584-part1 scsi-353333330000007d0 scsi-SATA_ST3250312AS_5VY7SH42 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part1 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part2 hdparm -i /dev/sda gives me an "invalid argument". dd if=/dev/sda of=sda.img the resulting file does not have any content sdparm results: /dev/sda: Linux scsi_debug 0004 Device identification VPD page: Addressed logical unit: designator type: T10 vendor identification, code set: ASCII vendor id: Linux vendor specific: scsi_debug 2000 designator type: NAA, code set: Binary 0x53333330000007d0 Target port: designator type: Relative target port, code set: Binary transport: Serial Attached SCSI (SAS) Relative target port: 0x1 designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007ce designator type: Target port group, code set: Binary transport: Serial Attached SCSI (SAS) Target port group: 0x100 Target device that contains addressed lu: designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007cd designator type: SCSI name string, code set: UTF-8 transport: Serial Attached SCSI (SAS) SCSI name string: naa.52222220000007CD

  Read the article

• Expanding raidz vdev

  - by Blubber

  I'm currently planning on installing FreeBSD 9 on my home server. The machine has 4x 1.5TB disks, and at some point, when HDD prices drop I'll be upgrading to something bigger, perhaps 3TB. The disks are connected to an IBM ServerRaid m1015 in IT mode, this card has room for up to eight disks. Now here is the problem, currently the 4x 1.5TB will be connected to the m1015. Then when prices drop I'll be adding something like 4x 3TB, also connected to the m1015. No problem yet, I can just run 2 raidz2 vdevs and put them in the same pool. But, at some point the 1.5TBs will start to break, or I will have to upgrade them when the pool runs out of space. So I started researching if it's possible to expand a raidz vdev, and I found several pages explaining the same procedure, like this on SF: How to upgrade a ZFS RAID-Z array to larger disks on OpenSolaris?. So I went a head and tried that in vmware, I installed FreeBSD 9 and created 6 virtual disks, 3 of 1GB each and 3 of 10GB each. After building a raidz vdev of the 1GBs I replaced them one by one with the 10GB, but the pool did not increase in size. Is this a limitation of the ZFS implementation in FreeBSD? Or am I just doing something wrong?

  Read the article

• Assembling Software RAID in Live CD for data recovery

  - by Maletor

  I need help recovering some data that's on my RAID which is on a LVM on my server running Ubuntu. What happened was I deleted the logical volume that controlled my swap space which was on a partition on drives sda2, sdb2, sdc2, and sdd2 in RAID1. This foobared my whole system for one reason or another. Booting leave me with grub rescue and an error saying that it is an unknown filesystem. When I boot to a live cd I can see my RAID arrays and I can even start them up. However, it doesn't appear to mount them anywhere so I can't see the data. I am in the live cd now and I have done sudo apt-get install mdadm lvm2 so it should be mounting them correctly. I just can't see why it wouldn't. Please any help is appreciated here. Here is some output. By the way, there are 3 RAIDs, 1) /boot 100mb RAID1, 2) swap 10gb RAID1, 3) root 990GB RAID5 ubuntu@ubuntu:~$ df -h Filesystem Size Used Avail Use% Mounted on aufs 124M 101M 18M 86% / none 2.0G 324K 2.0G 1% /dev /dev/sde1 2.0G 826M 1.2G 42% /cdrom /dev/loop0 667M 667M 0 100% /rofs none 2.0G 164K 2.0G 1% /dev/shm tmpfs 2.0G 28K 2.0G 1% /tmp none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/md1 91M 73M 15M 84% /media/5ac3dbf1-a6c5-409c-96ae-edc6e27992c7 ubuntu@ubuntu:~$ cat /etc/fstab aufs / aufs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdd2 swap swap defaults 0 0

  Read the article

• Efficient mirroring of directories using hardlinks

  - by zoqaeski

  I'm backing up my music collection on to a number of NTFS-formatted external hard-drives; however, as I store my main collection in FLAC and have my library on my laptop as MP3s to save space, I want to be able to back up both sets, because mass conversion between formats is time-consuming. The "music" directory can contain any format; the "mp3s" directory contains only MP3s converted from files in the "music" directory. The music collection on the laptop contains only MP3s, but they come from both sources. When I backup my laptop's library to the "mp3s" directory, I want to only copy across MP3 files that don't exist in the "music" directory; those that do should be hard-linked to the "music" directory. All directories have an identical hierarchy, sorted by artist, album, date, discnumber if applicable, etc, and I use a tagging editor to ensure consistency across all these locations. I'm also using a Linux computer, but keeping the music collections on NTFS-formatted partitions so that they are readable by both Linux and Windows. At the moment, I use the following command to perform the backups, but this is time-consuming due to the expensive nature of finding hard links. rsync -avu --progress --relative --ignore-existing --link-dest=../music/ **/*.mp3 /media/ntfspocket/mp3s Is there a way to perform this backup more efficiently, taking advantage of the directory hierarchy?

  Read the article

• i7-980X at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. Intel i7-980X@3,33 GHz with 12 GB of Team Group 1600 MHz DDR3 RAM. When we use Gurobi the computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an i7 930 all cores are at a near 100% level even after longer solution times. We first thought that the Hard disk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of RAM we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• How to recover Windows Password without reinstalling if you forgot Windows password?

  - by user38908

  Usually, we can recover Windows admin password in two traditional ways. The first is to change Windows password with another admin account; the second is to recover the previous password with the windows password reset disk that had been created before you forgot the password. Take Windows XP for example, 1 At the Windows XP login prompt when the password is entered incorrectly click the reset button in the login failed window. 2 Insert the password reset diskette into the computer and click Next. 3 If the correct diskette Windows XP will open a window prompting for the new password you wish to use. However, we offen ignore the important of security until we have been locked out of computer. Fortunately, there is still the last way that can unlock your computer without reinstalling - erase Windows password with Windows password reset CD, which can recover admin password for Windows 7/XP/Vista/NT/2000/2003.... Take Windows Password unlocker for example, followings are the steps to create the reset CD 1.Download Windows Password Unlocker from Password Unlocker Official site 2.Decompress the Windows password unlocker and note that there is an .ISO image file. Burn the image file onto an blank CD with the burner freely supported by Password Unlocker. 3.Insert the newly created CD into the locked computer and re-boot it from the CD drive. 4.After launched the CD, a window pop up with all your account names(if you have several accounts) select one of the accounts that you have forgotten its password to reset it. Just one press, this software can remove Windows password instantly.

  Read the article

• Certain websites redirect to 127.0.0.1. How do I fix this?

  - by Dian

  Facebook and Youtube in particular. Tried nslookup the address shows as 127.0.0.1. Checked the HOSTS file, it's fine. Ran Malwarebytes' Anti-Malware (didn't find any problems) and SpyBot Search and Destroy (found 1 problem). (Not sure if the Spybot made this improvement) now pinging youtube shows the correct address (74.125.71.91) but the browser still says: Connection to 127.0.0.1 Failed The system returned: (111) Connection refused Tried ipconfig /flushdns but there are no changes. Switched to another user but the results are the same. hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost ipconfig all: Connection-specific DNS Suffix: DNS Servers: 10.1.1.30 208.67.220.220

  Read the article

• Fedora 19 no longer bootable

  - by Parisa

  I had fedora dual-booted with windows on my laptop for a while but with windows refresh grub was gone and my system directly booted windows. I booted fedora with my systems boot options and with this tutorial: https://fedoraproject.org/wiki/GRUB_2 I reinstalled grub2 but then had my system booted into an empty grub prompt: grub So I found the drive containing vmlinuz and initramfs (completely sure about thair location and versions) and tried to manually boot it but after the boot command it said: no suitable video mode found booting in blind mode and nothing happened. Such a tragedy... I have already tried to use live disks rescue system. Funny but troubleshooting options don't apear on my laptop while they do on my desktop pc. I cant even go to boot prompt on my lenovo idepad z400 laptop. I also tried EasyBCD so maybe I could boot it with windows but it comes up with this error: missing AutoNeoGrub().mbr Now I have removed the grub prompt (don't know why) and its really hard for me to reinstall my dearly customized fedora. If anyone knows a way to help boot it again or reinstall it keeping my files and installations I really need it. Thanks PS:I have already tried Boot-repair Disk but it asks me to enable the repo containing grub-efi on my fedora to reinstall the grub2 and fix the boot for me (how could i?).

  Read the article

• After RAID failure SBS 2008 issues logging in and Exchange store does not mount

  - by Josh R

  today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

  Read the article

• Stop Windows 7 from accessing or writing to hard drive unless "told" to by me? (More info inside...)

  - by Jeff

  A confusing question, perhaps, but bear with me. I have two internal HDDs set up in a RAID0 array which I use as mass storage. I access the drive very infrequently (once a day at most) and so I have set up Windows 7's power options to turn off idle disks after only 1 minute. This is fine, and the disks are turned off most of the time. However, I notice that Windows sometimes spins up the drives when I really, really don't want or need it to. This causes a 30 second delay as both drives spin up and lock up my system. Some examples of when this happens: 1) When I'm installing something using Windows Installer or Installshield; it seems to me as if they're using the drive with most available free space as the installer cache location... so my big RAID drive has to spin up! Most annoying. 2) Apparently, when I open a Java-based program which resides on my system drive and has nothing to do with my RAID drive! 3) At boot-up and shut-down time. At shutdown the drive spin up only for the computer to immediately shut down! Incredibly frustrating! I've already tried changing the letter of the drive, and at some points have removed the drive letter entirely, which solves the first two issues above. So my question (FINALLY!) is this: is there any way I can mark this drive as being for "storage only", so Windows basically does not see it at all until I actually invoke it somehow? Or is there any way I could set it up so that only specific programs have write access to it? For example, download managers, TeraCopy, etc. etc.? Basically I want it to be a "ghost drive" until I'm ready to use it and to stop Windows from spinning it up all the damn time! Thank you. :)

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Security Token for Mac/Linux/Windows, self-managed, pref. open source?

  - by DevelopersDevelopersDevelopers

  I'm looking to buy an evaluation security token (combined smart card/usb reader) for my business that works on: Windows 7 x64 OS X 10.6.x x64 Ubuntu Linux (64 or 32 bit, 10.04 or 10.10, I can bend based on possible tokens) Functionality I need is: Login authentication Authentication for whole-disk encryption (in Linux/Windows, Mac is flexible here) Signing/encryption using PGP and x.509 certificates RSA-2048 key-capable (1024 not good enough.) I can manage the certificates myself Open source middleware/drivers (not necessarily FOSS, just source available. Can flex on this, I just want to be able to audit the code. OpenSC-compatible on Linux would be great.) Is there any token that can do all of this? Or would I need multiple ones to accomplish this? Or do I need to look at smart cards and readers to get this? I have been researching this for a while and have had a heck of a time even getting accurate information about products. Also, I am in the USA, and it appears that EU export laws prevent me from buying from there, so those vendors are out. I was looking at Feitian tokens from Gooze, but since they are in France I can't buy.

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• after building in more ram, bios/debian does nothing [closed]

  - by derty

  My private server has 2x1gb Ram working with a 64bit Debian and an Q6600 Intel. This runs 2 virtual mashines on it each one recives 512mb RAM. Which you can immagine is a bit tight for the hole system. Now i got 2x2gb ram from a friend. I'm not sure if thery are clocking at the same speed, but i'm sure my power adaptor is not on his limit and can handle that. So there are 2 ram sockets left at the mainboard. I shuted down the system and build in the 4 gigs and looked what happen. After pressing the start button, everything gets noisy as known BUT the screen shows nothing, not even the bios stuff it usally does. Why isn't the system booting? I can immagine that it does not direkt link between booting debian and the bios not showing a thing. Or is it Grub? I mounted the system disk, and i can see it, switch folders write stuff with "vim" it does not seems like there is a problem.

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >